G3VM-21GR1 MOS FET Relays MOS FET Relays with Low Output Capacitance and ON Resistance (C × R = 5pF • Ω) in a 20-V Load Voltage Model. •ON resistance of 1 Ω (typical) suppresses output signal attenuation. •Leakage current of 1.0 nA max. when output relay is open. RoHS compliant Note : The actual product is marked differently from the image shown here. ■Application Examples ■Terminal Arrangement/Internal Connections •Semiconductor test equipment •Test & Measurement equipment 4 3 •Communication equipment Mold pin mark * OMRON logo Model name •Data loggers Pin 1 mark 932 LOT.No. 1 2 Note:The actual product is marked differently from the image shown here. *The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■List of Models Load voltage Minimum package quantity Package type Contact form Terminals Model (peak value) * Number per tube Number per tape and reel 1a G3VM-21GR1 100 - SOP4 Surface-mounting Terminals 20 V (SPST-NO) G3VM-21GR1 (TR) - 2,500 *The AC peak and DC value are given for the load voltage. ■Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement conditions LED forward current IF 50 mA ut LED forward current reduction rate ∆IF/°C −0.5 mA/°C Ta ≥ 25°C p n LED reverse voltage VR 5 V I Connection temperature TJ 125 °C Load voltage (AC peak/DC) VOFF 20 V put Continuous load current (AC peak/DC) IO 300 mA Out ON current reduction rate ∆IO/°C −3.0 mA/°C Ta ≥ 25°C Connection temperature TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms AC for 1 min Note: 1. The dielectric strength between the input and Ambient operating temperature Ta −20 to +85 °C With no icing or condensation output was checked by applying voltage Ambient storage temperature Tstg −55 to +125 °C With no icing or condensation between all pins as a group on the LED side and Soldering temperature - 260 °C 10 s all pins as a group on the light-receiving side. ■Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times Input RCTraeipgvagecerirst yLe Eb Dceut fworerrweenna rttd e rcmuirnreanlst CIIFRTT --- 1--5 14-0 mµpAFA IVVOR == = 01 5,0 f0V = m 1A MHz IF 12 43 RL VVDODUT ut Maximum resistance with output ON RON - 1 1.5 Ω IF = 5 mA, IO = 300 mA, t < 1 s utp Current leakage when the relay is open ILEAK - - 1.0 nA VOFF = 20 V, Ta = 50 °C O Capacity between terminals COFF - 5 12 pF V = 0, f = 100 MHz, t < 1 s IF Capacity between I/O terminals CI-O - 0.8 - pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 - - MΩ VI-O = 500 VDC, ROH ≤ 60 % Turn-ON time tON - - 0.5 ms IF = 10 mA, RL = 200 Ω, VOUT 10% 90% Turn-OFF time tOFF - - 0.5 ms VDD = 20 V (See note 2.) tON tOFF 1

G3VM-21GR1 MOS FET Relays ■Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD - - 20 V Operating LED forward current IF 7 - 30 mA Continuous load current (AC peak/DC) IO - - 300 mA Ambient operating temperature Ta 25 - 60 °C ■Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature LED forward current vs. LED forward voltage IF - Ta IO - Ta IF - VF A)100 A) 500 A) 100 LED forward current I (mF 468000 ntinuous load current I (mO 234000000 LED forward current I (mF 531500013 Ta = 25°C o C 0.5 20 100 0.3 0 0 0.1 -20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta (°C) Ambient temperature Ta (°C) LED forward voltage VF (V) Continuous load current vs. On-state voltage On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature IO - VON RON - Ta IFT - Ta Continuous load current I (mA)O --2112345000000000000000 TIFa = = 5 2 m5°AC ΩOn-state resistance R ()ON 123 IItOF < == 1 53s 0m0A mA ger LED forward current I (mA)FT 2345 ItO < = 1 1s00 mA g -300 Tri 1 -400 -500 0 0 -1 -0.5 0 0.5 1 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta (°C) Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. LED forward current Turn ON, Turn OFF time vs. Ambient temperature Current leakage vs. Load voltage tON, tOFF - IF tON, tOFF - Ta ILEAK - VOFF µON, Turn OFF time t, t (s)ONOFF 1130000000 TVaDD = = 2 150°C V,t ORtFOLFN = 200 Ω µON, Turn OFF time t, t (s)ONOFF 122334505050000000 VIFD =D 1=0 1 m0 AV, RL = 200 Ω tOFF Current leakage I (pA)LEAK 11505 Ta = 25 °C Turn 30 Turn 100 tON 50 10 0 1 3 10 30 100 -20 0 20 40 60 80 100 0 5 10 15 20 LED forward current IF (mA) Ambient temperature Ta (°C) Load voltage (V) Output terminal capacitance vs. Load voltage COFF - VOFF 0V) 1 Ta = 25 °C C (OFF 0.8 C/OFF e nc 0.6 a acit p al ca 0.4 n mi er 0.2 ut t p ut O 0 10 20 30 Load voltage (V) ■Safety Precautions •Refer to "Common Precautions" for all G3VM models. 2

Appearance/Dimensions SOP4 type ■Appearance SSOOPP ((SSmmaallll OOuuttlliinnee PPaacckkaaggee)) SOP4 Mold pin mark * OMRON logo Model name Pin 1 mark 932 LOT.No. Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Weight: 0.1 g Dimensions 4.4±0.25 (Recommended Value, TOP VIEW) 3.9±0.2 2.1 max. 0.15 1.26 to 6.3 0.4±0.1 0.1±0.1 0.6±0.3 0.8 7.0±0.4 2.54±0.25 2.54 Note:The actual product is marked differently from the image shown here. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K182-E1-01 0412(0412)(O)