ELPAC FWC100 SERIES CLASS I 100 Watt ITE Desktop Power Supply • ITE Approval - EN60950 • High Efficiency: Level VI • LED Indicator • Hold-up Time >20ms at full load • Grounded Output • 5-Year Limited Warranty • Lifetime Expectation >5 years Model Number Output Voltage Output Current Peak Current 1 Total Regulation 2 Typical Efficiency 3 FWC100012A-12A 12.0V 8.3A 10.0A ±5% 89% FWC100015A-12A 15.0V 6.6A 8.0A ±5% 90% FWC100018A-11A 18.0V 5.5A 6.7A ±5% 90% FWC100024A-11A 24.0V 4.1A 5.0A ±5% 90% FWC100048A-11A 48.0V 2.0A 2.5A ±5% 91% Notes 1) Maximum peak load (120W) lasting 500ms with a maximum 10% duty cycle. 2) Includes initial setting, line regulation, load regulation, and thermal drift. 3) Typical at 115VAC (including output cable). INPUT OUTPUT 85 – 264VAC Output Voltage See Table Input Voltage 100 – 240VAC Nominal Total Regulation +/-5% Input Frequency 47 – 63Hz Minimum Load No minimum load required Input Current <2A rms Start-Up Delay <1.5s Inrush Current <60A at 230VAC cold start Hold-Up Time >20ms at any input voltage Power Factor >0.97 Ripple & Noise <1% pk-pk ** Zero Load <0.2W Power Consumption Over Voltage Protection 110 – 135% Over Temperature Active - Recoverable; plus <150μA @ 132VAC @ 60Hz Protection Passive - Non Recoverable Earth Leakage Current (Typical) Over Current Protection 120 – 180% <240μA @ 264VAC @ 60Hz Short Circuit Protection Shutdown, auto-restart (hiccup mode) Notes **Ripple and noise measured with 20MHz bandwidth; 10μF tantalum capacitor in parallel with a 0.1μF ceramic capacitor. Inventus Power Inventus Power Technical Support: 1200 Internationale Parkway Woodridge, IL 60517, USA powersupplies@inventuspower.com

ELPAC FWC100 SERIES 100 Watt Medical Desktop Power Supply General Environmental EMC & Safety Avg. Efficiency 90.8% @ 0 – 60°C (Full load to 40°C, FCC class B, CISPR2.2 class B Efficiency Operating Emissions 115VAC; 92.8% @ 230VAC derate linearly to 50% load at EN61000-3-2, -3 Temperature 60°C) min. 200,000 hours EN61000-4-2, -3, -4, -5, -6, -8, MTBF demonstrated Storage -40°C to +85°C Immunity -11 Temperature 7.09” (180.2mm) x 2.27” cTUVus Size (57.5mm) x 1.52” (38.7mm) Relative 5-95%, non-condensing UL 60950-1 Humidity Certified by Weight 1.55 lbs (0.70 Kg) TUV to the CAN/CSA-22.2 No.60950-1 Cooling Natural Convection following: CB per IEC60950-1 All units production tested to Power Density 4.2W/in3 Vibration 19.6m/s2 CE marked to LVD& EMC Input Configuration Output Pin Assignments Output Pin Assignments 12V, 18 V 18-48V Standard Not Provided Input Cable Pin 1 +V1 Pin 1 Return Connection on Power Supply IEC 320 C14 Receptacle Pin 2 +V1 Body Pin 3 Return Pin 2 Return Output Configuration Pin 4 +V1 Standard 4ft for 12V & 15V Pin 3 +V1 Output Cable 6ft for 18V, 24V & 48V Pin 5 Return 4x16awg (12V& 15V); 4x18awg Cord Size (18V - 48V) Pin 6 +V1 Pin 4 Return Switchcraft DIN-8 (12-15V) Connector P/N 15BL8MX (male pins) Pin 7 Return (PSU side) Switchcraft DIN-5 (18-48V) Pin 5 +V1 Pin 8 Return P/N 05BL5MX (male pins) Mechanical Drawing Inventus Power IP_DS_FWC100-I_072916_01 1200 Internationale Parkway inventuspower.com Woodridge, IL 60517, USA ©2016 Inventus Power, All rights reserved.