Detector Switches/ESE11 ESE11 Detector Switches ESE11 Type: Features Wide range of customizable feat ures including operational directions Light operating force Wide available range for refl ow soldering Recommended Ap plic a tions Detection of media in portable electronic equipment Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 Rating 50 μA 3 V DC to 10 mA 5 V DC (Resistive load) Contact Resistance 500 mΩ max. (Initial) Insulation Resistance 100 MΩ min. (at 100 V DC for 1 minute) Dielectric Withstanding Voltage 100 V AC (50 Hz or 60 Hz) for 1 minute Operating Force 350 mN max. (Full Travel) · ESE11SV Type 4.9 mm · ESE11MV Type 4.9 mm Mounting Height · ESE11SH Type 5.25 mm · ESE11MH Type 4.25 mm · ESE11HS, SF Type 3.6 mm Poles and Throws 1-pole 1-throw · ESE11SV Type 6.1 mm (2.4 mm) · ESE11MV Type 6.1 mm (2.4 mm) Full Travel (Pushing distance) · ESE11SH Type 3.0 mm (2.4 mm) · ESE11MH Type 1.7 mm (2.4 mm) · ESE11HS, SF Type 6.3 mm (2.4 mm) Operating Life 50,000 cycles min. Temperature Range –10 °C to +70 °C (Standard), –40 °C to +85 °C (Automotive) Heat Resistance +80 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance +40 °C 90 % to 95 % RH for 96 hours Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.12 industrial.panasonic.com/ac/e/ –1– 　Panasonic Corporation 2017 ANCTB52E 201712-Fd ANCTB52E.indd 1 17/12/12 9:19

Detector Switches/ESE11 ESE11SV□ ESE11MV□ ESE11SH□ 200 pcs. ESE11MH□ Polyethylene Bag (Bulk) ESE11HS□ Minimum Quantity/Packing Unit ESE11SF□ ESE11MV□T 800 pcs. (Excluding : ESE11MV2) Embossed Taping (Reel Pack) 1,500 pcs. ESE11MH□T Embossed Taping (Reel Pack) ESE11SV□ ESE11MV□ ESE11SH□ 10,000 pcs. ESE11MH□ Polyethylene Bag (Bulk) Quantity/ ESE11HS□ ESE11SF□ Carton ESE11MV□T 4,800 pcs. (Excluding : ESE11MV2) Embossed Taping (Reel Pack) 9,000 pcs. ESE11MH□T Embossed Taping (Reel Pack) Dimensions in mm (not to scale) No. 1 ESE11SV1 For wave soldering No. 2 ESE11MV1 For refl ow soldering 1-pole 1-throw 1-pole 1-throw 1.51.75 1.0 20 2.2 3.0 2.3. 5.2 5.2 6.4 6.4 A A 1.65 1.0 2.45 1.27 Full travel 1.0 1.27 Full travel e 0.8 ON starting OpoNs istitoanrting p position Vertical Ty 4.91.0 8.5 6.1 7.75 1.04.9 8.50.2 0.86.1 7.75 1.0 (2.7) 0.1 0 2.3 01.9.05 φ1 .2–00.1 1.65 0.1 1.75 1. φ1.2 – 00.1 (3.3) 4– φ 1.85 1.4 φ1.10 +00.051.25 0+0.05 2-φ1.3 Hole 1.40 2. 3.3 2.0 1.4 Lever center 2.3 0.95 3.25 1.4 (2.45) 3.35 PWB mounting hole for reference PWB mounting hole for reference View from A View from A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –2– 　Panasonic Corporation 2017 ANCTB52E 201712-Fd ANCTB52E.indd 2 17/12/12 9:19

Detector Switches/ESE11 Dimensions in mm (not to scale) No. 3 ESE11MV9 For refl ow soldering No. 4 ESE11SH1C For wave soldering 1-pole 1-throw 1-pole 1-throw Gold plating Gold plating ESE11MV13 1.5 1.75 ESE11SH5 A 1.0 6.4 5.6 1.65 20 2.3. 2 4. 0 56A..24 5.95.74.75 1.27 3.3.155.25 1.0 1.65 1.27 Full travel 1.0 FOuNll tsrtaavretinlg 1.0 ON starting position 1.75 1.5 position 3.2 5.36 3.0 ype 1.0 6.51.0 45..645 2.35 0.1 T Vertical 4.9 8.5 0.8 6.1 7.75 0.88.5 1 1 5. 1.65 1.75 1.0 φ1.2 – 00.1 3. φ1.2 0 1.85 4–1.4 4 1. 1. 5.36 – 1.75 1.5 2– 4 φ1.30 +00.05 2.0 2.35 2-φ1.10 2.0 4) (1.65) 2-φ1.20 5. ( Lever center 3.25 3.35 PWB mounting hole for reference PWB mounting hole for reference View from A View from A No. 5 ESE11SH2C For wave soldering No. 6 ESE11MH1 For reflow soldering 1-pole 1-throw 1-pole 1-throw Gold plating Gold plating ESE11SH6 A ESE11MH3 6.4 5.6 1.65 7.6 1.6 5.0 1.6 0.8 1.75 1.5 2 5.95.74.75 4. 1.27 3.03.155.25 1.4 1.4 2 4 Full travel 7 2. 3. 1.0 ON starting 1.0 9 6. 6 1.5 1.75 position 3.2 4. 0. al Type 1.056..356 45..6435.0 2.35 0.1 1.65 1.0 PWB mounVtiienwg5 hf.r3oo6lme f oAr refere2n-φc0e.70 hole ont 0.8 z A Hori 18.5 0.7 45.4.4 3.1 5. 65..46 3.2 7 2.9 2 φ1.2 0 1. 1. 1.5 5.36 1.75 0.2 4.25 2.1 3.0 2 2.35 2-φ1.10 11.7.25 1.5 0.5 C0.2 0.6–00.05 0.1 1.φ 1.7 1.0 5.4) (1.65) 2-φ1.20 5.36 Full travel 3.7–00.7 ( Lever center ON starting position 4.1 4.6 PWB mounting hole for reference View from A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –3– 　Panasonic Corporation 2017 ANCTB52E 201712-Fd ANCTB52E.indd 3 17/12/12 9:19

Detector Switches/ESE11 Dimensions in mm (not to scale) No. 7 ESE11MH2 For refl ow soldering No. 8 ESE11HS1 with mounting hole 1-pole 1-throw 1-pole 1-throw Gold plating ESE11MH4 7.65 4.5 φ1.2–00.1 1.0 7.6 11.6.5 5.0 11.7.65 3.75 3.03.6 0.8 1.4 4 1. 5.2 1.0 ON starting 8.6 φ1.2–00.1 position 2.2 3.4 6.15 1.5 Full travel Full travel 2.2 ON starting 6.7 9 0.6 1.0 1.27 position 4. 1A.01.65 PWB mou0nV.t7iienwg5 hf.r3oo6lme5 .f 4oAr refer2e-φn0c.7e0 5.852.85φ1.152.0–0.10 1.00.93.64.5 B 7.006.556.0–4.6 6.37.958.7 A 65..46 3.42.4 11.6.75 1.5φ1.01.5 01.1.65 7 2.9 2.25 2 1. 6.15 6.15 11..25 1.750.2 0.54.25 2.1 C0.2 0.6–00.05 0.1 1.2φ3.0 4.50±0.05 5.852.85±0.05 5.85 M2 screw hole 1.7 1.0 5.36 ON Fsutallr ttrinagve plosition 43..135 4.6 M2 screw hole φ1.30+00.05 hole1.15±0.05 φ1.307+.600.50±5 0h.o0le5 e View from side A View from side B p Ty PWB mounting hole for reference al ont No. 9 ESE11HS2 with mounting hole No. 10 ESE11SF1A For snap in Type riz 1-pole 1-throw 1-pole 1-throw o H 7.65 4.5 8.0 φ1.2–00.1 1.0 0.5 0.6 0.5 0.6 3.75 3.03.6 1.0 φ1.2–00.1 1.00.8 8.65.2 φ11.0.2–00.1 OpoNs istitoanrting 1.03.63.0 (2.6) 6.15 1.5 Full travel Full travel 5.2 φ1.2 2.2 ON starting 1.0 1.27 position A Full travel 1.65 1.5 2.2 5.852.85φ1.152.0–0.1011.6.75 1.5φ11.00.9.03.64.51.5 B 7.006.556.0–4.6 106.3..6157.958.7 A 5.353.351.5 1.0 0.90.74.53.6 7.0 1.27 6.37.95Op8.7oNs istitoanrting 2.25 6.15 6.15 1.16.75 1φ.51.0 1.5 1.06.51 4.50±0.05 5 M2 screw hole 2.25 0 5.852.85±0. 5.85 +0.580 ±0.05 2 M2 screw holeφ1.30+00.05 hole1.15±0.05 φ1.307+.600.50±5 0h.o0le5 φ11..330++0000..505 8.010.3++0000.0.55 1. 3.35 8.7±0. PW(PBW mBo uthniVctiinkengwe h sforsol=em0 f.o8Ar0 r±e0fe.0re5n)ce View from side A View from side B PWB mounting hole for reference Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –4– 　Panasonic Corporation 2017 ANCTB52E 201712-Fd ANCTB52E.indd 4 17/12/12 9:19

Detector Switches/ESE11 Circuit Diagram MH, SH Type MV, SV Type SF, HS Type 1-pole 1-throw (N.O) 1-pole 1-throw (N.O) 1-pole 1-throw (N.O) Common terminal C Frame Frame Lever Common Common terminal C C terminal C C Common Common terminal terminal Standard Reel Dimensions in mm (not to scale) Taping Reel Embossed Carrier Taping ESE11MV1T, ESE11MV5T, ESE11MV9T 75±0.1 CEaNrrDier taφp1e.5 0+0.142..00±±00..11P=12.0±P0i.l1ot holeDsraLweiandgi ndgir epcotriotionn 400 mm minT.OP 1. 3 0. ± 5 6.0 13. 1 5) Non-packed portion Non-packed portion 7. (160 mm min.) Packed portion (100 mm min.) Cover tape ( φ380±2.0 16.4 ESE11MH1T, ESE11MH2T 75±0.1 CEaNrrDier tapφe1.5 0+0.142..00±±00P..11=12.0±0P.1ilot holeDsraLweiandgi ndgir epcotriotinon 400 mm minT.OP 1. 3 0. ± 5 6.0 13. 1 5) Non-packed portion Non-packed portion 7. (160 mm min.) Packed portion (100 mm min.) Cover tape ( Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ –5– 　Panasonic Corporation 2017 ANCTB52E 201712-Fd ANCTB52E.indd 5 17/12/12 9:19