图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: ERJ-14YJ200U
  • 制造商: Panasonic Corporation
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

ERJ-14YJ200U产品简介:

ICGOO电子元器件商城为您提供ERJ-14YJ200U由Panasonic Corporation设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 ERJ-14YJ200U价格参考¥0.25-¥0.25。Panasonic CorporationERJ-14YJ200U封装/规格:芯片电阻 - 表面安装, 20 Ohms ±5% 0.5W,1/2W 厚膜 芯片电阻 1210(3225 公制) 汽车级 AEC-Q200 厚膜。您可以下载ERJ-14YJ200U参考资料、Datasheet数据手册功能说明书,资料中有ERJ-14YJ200U 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

电阻器

描述

RES 20 OHM 1/2W 5% 1210 SMD厚膜电阻器 - SMD 1210 20ohms 5% Tol

产品分类

芯片电阻 - 表面安装

品牌

Panasonic Electronic Components

产品手册

点击此处下载产品Datasheet

产品图片

rohs

RoHS 合规性豁免无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

薄膜电阻器,厚膜电阻器 - SMD,Panasonic ERJ-14YJ200UERJ

数据手册

http://industrial.panasonic.com/www-cgi/jvcr13pz.cgi?E+PZ+3+AOA0001+ERJ14YJ200U+7+WW

产品型号

ERJ-14YJ200U

产品

Thick Film Resistors SMD

产品目录绘图

产品目录页面

点击此处下载产品Datasheet

产品种类

厚膜电阻器 - SMD

供应商器件封装

1210

其它名称

ERJ-14YJ200
ERJ14YJ200
P20VCT

功率(W)

0.5W,1/2W

功率额定值

500 mW (1/2 W)

包装

剪切带 (CT)

商标

Panasonic

外壳代码-in

1210

外壳代码-mm

3225

外壳宽度

2.5 mm

外壳长度

3.2 mm

外壳高度

0.6 mm

大小/尺寸

0.126" 长 x 0.098" 宽(3.20mm x 2.50mm)

容差

±5%

封装

Reel

封装/外壳

1210(3225 公制)

封装/箱体

1210 (3225 metric)

工作温度范围

- 55 C to + 155 C

工厂包装数量

5000

成分

厚膜

标准包装

1

温度系数

±200ppm/°C

特性

获得 AEC-Q200 汽车认证

电压额定值

200 V

电阻

20 Ohms

电阻(Ω)

20

端子数

2

类型

Thick Film Resistors SMD

系列

ERJ

高度

0.028"(0.70mm)

推荐商品

型号:TNPW0603294RBEEA

品牌:Vishay Dale

产品名称:电阻器

获取报价

型号:3-2176091-4

品牌:TE Connectivity Passive Product

产品名称:电阻器

获取报价

型号:ERJ-3EKF15R4V

品牌:Panasonic Electronic Components

产品名称:电阻器

获取报价

型号:CRCW251226K7FKEG

品牌:Vishay Dale

产品名称:电阻器

获取报价

型号:CRCW080516K2FKTA

品牌:Vishay Dale

产品名称:电阻器

获取报价

型号:ERJ-6ENF1183V

品牌:Panasonic Electronic Components

产品名称:电阻器

获取报价

型号:CRCW25121K00JNEGHP

品牌:Vishay Dale

产品名称:电阻器

获取报价

型号:ERJ-3EKF1650V

品牌:Panasonic Electronic Components

产品名称:电阻器

获取报价

样品试用

万种样品免费试用

去申请
ERJ-14YJ200U 相关产品

CRCW0603750KFKEAC

品牌:Vishay Dale

价格:

Y1629100R000Q9R

品牌:Vishay Foil Resistors (Division of Vishay Precision Group)

价格:¥129.06-¥129.06

ERJ-1TNF3323U

品牌:Panasonic Electronic Components

价格:

CRCW1206105KFKEA

品牌:Vishay Dale

价格:¥0.12-¥0.12

ERA-2APB2320X

品牌:Panasonic Electronic Components

价格:

TNPW0805390RBEEA

品牌:Vishay Dale

价格:

WSL20106L000FEA18

品牌:Vishay Dale

价格:

RG1005P-753-W-T5

品牌:Susumu

价格:

PDF Datasheet 数据手册内容提取

Thick Film Chip Resistors Thick Film Chip Resistors Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features ● Small size and lightweight ● High reliability Metal glaze thick fi lm resistive element and three layers of electrodes ● Compatible with placement machines Taping packaging available ● Suitable for both refl ow and fl ow sold er ing ● Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualifi ed (Exemption ERJXG) ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers ● ERJXGN, 1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Type, ±5 % 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Product Code Size, Power Rating Marking Resistance Tolerance Packaging Methods Thick Film Code Inch Power R. Code Marking Code Tolerance Code Packaging Part No. Chip Resistors XGN 01005 0.031 W Y Value Marking on J ±5 % Y PWr8ePss2e, d2 0C,0a0rr0ie pr cTsa.ping 1GN 0201 0.05 W black side 0 Jumper ERJXGN 2GE 0402 0.1 W ✽Nil No marking U Embossed Carrier Taping W4P1, 40,000 pcs. 3GE 0603 0.1 W 6GE 0805 0.125 W Resistance Value C P2 rmesmse pdit cCha,r r1ie5r,0 T0a0p ipncgs . ERJ1GN 8GE 1206 0.25 W The first two digits are significant figures of resistance and 14 1210 0.5 W the third one denotes number of zeros following. X Punched Carrier Taping 2 mm pitch, 10,000 pcs. 12 1812 0.75 W Decimal Point is expressed by R as 4.7 = 4R7. ERJ2GE 12Z 2010 0.75 W Jumper is expressed by R00. Y Punched Carrier Taping 2 mm pitch, 20,000 pcs. 1T 2512 1 W ERJ3GE Punched Carrier Taping V ERJ6GE 4 mm pitch, 5,000 pcs. ✽ When omitted, the rest of the P/N factors shall be moved up respectively. ERJ8GE (Only XGN, 1GN, 2GE type) ERJ14 Embossed Carrier Taping ERJ12 4 mm pitch, 5,000 pcs. U ERJ12Z Embossed Carrier Taping ERJ1T 4 mm pitch, 4,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Aug. 2018

Thick Film Chip Resistors Construction Dimensions in mm (not to scale) L a Protective coating W Alumina substrate Electrode (Inner) t b Dimensions (mm) Mass (Weight) Part No. L W a b t (g/1000 pcs.) ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 Electrode ERJ1G 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15 (Between) ERJ2G 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 ERJ3G 1.60±0.15 0.80+–00..1055 0.30±0.20 0.30±0.15 0.45±0.10 2 ERJ6G 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4 ERJ8G 3.20+–00..2005 1.60+–00..0155 0.50±0.20 0.50±0.20 0.60±0.10 10 ERJ14 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 Thick film Electrode (Outer) resistive element ERJ12 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27 ERJ12Z 5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10 27 ERJ1T 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 Ratings [For Resistor] Power Rating (3) Limiting Element Maximum Overload Resistance Resistance Category Part No. T.C.R. AEC-Q200 at 70 °C Voltage (1) Voltage (2) Tolerance Range Temperature Range (inch size) (×10–6/°C) Grade (W) (V) (V) (%) (Ω) (°C) <10 Ω : –100 to +600 ERJXG 0.031 15 30 ±5 1 to 1M (E24) 10 Ω to 100 Ω : ±300 –55 to +125 – (01005) 100 Ω ≤ : ±200 ERJ1G 0.05 25 50 ±5 1 to 10M (E24) –55 to +125 Grade 1 (0201) ERJ2G 0.1 50 100 ±5 1 to 10M (E24) –55 to +155 Grade 0 (0402) ERJ3G <10 Ω: 0.1 75 150 ±5 1 to 10M (E24) –55 to +155 Grade 0 (0603) –100 to +600 ERJ6G 0.125 150 200 ±5 1 to 10M (E24) –55 to +155 Grade 0 (0805) ERJ8G 10 Ω to 1M Ω: 0.25 200 400 ±5 1 to 10M (E24) –55 to +155 Grade 0 (1206) ±200 ERJ14 0.5 200 400 ±5 1 to 10M (E24) –55 to +155 Grade 0 (1210) ERJ12 1M Ω<: 0.75 200 500 ±5 1 to 10M (E24) –55 to +155 Grade 0 (1812) –400 to +150 ERJ12Z 0.75 200 500 ±5 1 to 10M (E24) –55 to +155 Grade 0 (2010) ERJ1T 1 200 500 ±5 1 to 1M (E24) –55 to +155 Grade 0 (2512) (1) Rated Continuous Working Voltage (RCWV) shall be det er mined from RCWV=√Power Rating × Re sis tance Values, or Limiting Element Voltage liste d above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less. (3) Use it on the condition that the case temperature is below the upper category temperature. [For Jumper] Power Derating Curve Part No. Rated Current Maximum Over load Current (1) For resistors operated in ambient temperatures above (inch size) (A) (A) 70 °C, power rating shall be derated in accordance ERJXG (01005) with the figure below. 0.5 1 ERJ1G (0201) ERJ2G (0402) 1 2 –55 °C 70 °C ERJ3G (0603) 100 EERRJJ68GG ((01280065)) ad (%)6800 21G4,, 132G, ,1 62GZ,, 18TG, o EEERRRJJJ111422 Z (((112280111002))) 2 4 Rated L24000 XG,1 12G5 °C 155 °C –60 –40–20 0 20 40 60 80 100120140160180 ERJ1T (2512) Ambient Temperature (°C) (1) Overload test current Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Aug. 2018

Thick Film Chip Resistors Perfomance Performance Requirements Test Item Test Conditions Resistor type Jumper type Within Specifi ed Resistance 50m Ω or less 20 °C Tolerance Within Specifi ed T. C. R. 50m Ω or less +25 °C/+155 °C (ERJXG, ERJ1G : +25 °C/+125 °C) T. C. R. Rated Voltage × 2.5, 5 s Overload ±2% 50m Ω or less Jumper type : Max. Overload Current, 5 s Resistance to Soldering Heat ±1% 50m Ω or less 270 °C, 10 s Rapid Change of –55 °C (30min.) / +155 °C (ERJXG, ERJ1G : +125 °C) (30min.), ±1% 50m Ω or less Temperature 100 cycles High Temperature ±1% 50m Ω or less +155 °C (ERJXG, ERJ1G : +125 °C) , 1000 h Exposure Damp Heat, Steady State ±1% 50m Ω or less 60 °C, 90% to 95 %RH, 1000 h 60 °C, 90% to 95 %RH, Rated Voltage (Jumper type: Rated Current), Load Life in Humidity ±3% 50m Ω or less 1.5 h ON/0.5 h OFF cycle, 1000 h 70 °C, Rated Voltage(Jumper type: Rated Current), Endurance at 70 °C ±3% 50m Ω or less 1.5 h ON/0.5 h OFF cycle, 1000 h Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Aug. 2018

Surface Mount Resistors Safety precautions Safety Precautions (Common precautions for Surface Mount Resistors) The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur. 2. Keep the rated power and ambient temperature within the specified derating curve. Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or amb ie nt tem per a tures can become factors in the rise of the temperature of the res is tors, regardless of the level of power applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral components. Make sure to contact us before using the resistors under special conditions. 3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired. 4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the per for mance and reliability of the resistors. 5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.). 6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder. 7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors' protective coatings and bodies may be chipped, affecting their performance. 9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress. 10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of imm er sion. 11. Transient voltage If there is a possibility that the transient phen om e non (significantly high voltage ap plied in a short time) may occ ur or that a high voltage pulse may be applied, make sure to evaluate and check the chara ct er is tics of Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated pow er limit or steady-state conditions to complete the des ign or decide to use the resistors. 12. Do not apply excessive tension to the terminals. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014

Safety Precautions (Common precautions for Fixed Resistors) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipm ent where a defect in these products may cause the loss of human life or other significant dam age, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sing le fault (1) Precautions for use • These products are designed and manufactured for general and standard use in general elect ron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) • These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent 2. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 4. Electric Static Discharge (ESD) Environment These components are sensitive to static electricity and can be damaged under static shock (ESD). Please take measures to avoid any of these environments. Smaller components are more sensitive to ESD environment. 5. Electromagnetic Environment Avoid any environment where strong electromagnetic waves exist. 6. In an environment where these products cause dew condensation 7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials • These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. • Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. • Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the performance or reliability of the products. • Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. (2) Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arr iv al at your company, provided that they remain packed as they were when delivered and stored at a temp er a ture of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl, H S, NH , SO , or NO 2 2 3 2 2 2. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. 01 Sep. 2014

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: P anasonic: ERJ-6GEYJ152V ERJ-12ZYJ390U ERJ-12ZYJ100U ERJ-14YJ331U ERJ-1TY0R00U ERJ-1TYJ910U ERJ- 12ZYJ330U ERJ-14YJ1R6U ERJ-12ZYJ221U ERJ-12ZYJ4R7U ERJ-1TYJ301U ERJ-1TYJ560U ERJ-14YJ181U ERJ-12ZYJ473U ERJ-1TYJ133U ERJ-1TYJ821U ERJ-14YJ472U ERJ-1TYJ131U ERJ-6GEYJ221V ERJ- 8GEYJ683V ERJ-14YJ151U ERJ-2GEJ225X ERJ-1TYJ130U ERJ-3GEYJ113V ERJ-3GEYJ622V ERJ-3GEYJ7R5V ERJ-3GEYJ563V ERJ-3GEYJ564V ERJ-3GEYJ565V ERJ-3GEYJ6R2V ERJ-3GEYJ6R8V ERJ-3GEYJ515V ERJ- 3GEYJ621V ERJ-3GEYJ623V ERJ-3GEYJ624V ERJ-3GEYJ625V ERJ-3GEYJ681V ERJ-3GEYJ683V ERJ- 3GEYJ684V ERJ-3GEYJ395V ERJ-3GEYJ620V ERJ-3GEYJ430V ERJ-3GEYJ432V ERJ-3GEYJ433V ERJ- 3GEYJ434V ERJ-3GEYJ435V ERJ-3GEYJ560V ERJ-3GEYJ475V ERJ-3GEYJ5R1V ERJ-3GEYJ5R6V ERJ- 3GEYJ685V ERJ-3GEYJ824V ERJ-3GEYJ755V ERJ-3GEYJ8R2V ERJ-3GEYJ825V ERJ-3GEYJ9R1V ERJ- 3GEYJ911V ERJ-3GEYJ912V ERJ-3GEYJ913V ERJ-3GEYJ914V ERJ-3GEYJ915V ERJ-3GEYJ2R0V ERJ- 3GEYJ163V ERJ-3GEYJ164V ERJ-3GEYJ165V ERJ-3GEYJ181V ERJ-3GEYJ182V ERJ-3GEYJ2R4V ERJ- 3GEYJ2R7V ERJ-3GEYJ204V ERJ-3GEYJ184V ERJ-3GEYJ115V ERJ-3GEYJ120V ERJ-3GEYJ123V ERJ- 3GEYJ124V ERJ-3GEYJ125V ERJ-3GEYJ162V ERJ-3GEYJ133V ERJ-3GEYJ134V ERJ-3GEYJ135V ERJ- 3GEYJ150V ERJ-3GEYJ153V ERJ-3GEYJ154V ERJ-3GEYJ155V ERJ-3GEYJ205V ERJ-3GEYJ304V ERJ- 3GEYJ305V ERJ-3GEYJ333V ERJ-3GEYJ335V ERJ-3GEYJ361V ERJ-3GEYJ364V ERJ-3GEYJ365V ERJ- 3GEYJ390V ERJ-3GEYJ392V ERJ-3GEYJ334V ERJ-3GEYJ223V ERJ-3GEYJ225V ERJ-3GEYJ240V ERJ- 3GEYJ243V ERJ-3GEYJ302V