SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125℃ MHJ AIchipTM- Series MHK P116 ・Endurance : 2,000 to 3,000 hours at 125℃ Lower ESR ・Rated voltage range : 10 to 35V MHJ ・Nominal capacitance range : 47 to 470µF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Lower ESR ・Vibration resistant structure MHB P112 ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category -40 to +125℃ Temperature Range Rated Voltage Range 10 to 35Vdc Capacitance Tolerance ±20%(M) (at 20℃, 120Hz) Leakage Current I=0.01CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes) Dissipation Factor Rated voltage(Vdc) 10V 16V 25V 35V (tanδ) tanδ(Max.) 0.30 0.23 0.18 0.16 (at 20℃, 120Hz) Low Temperature Rated voltage(Vdc) 10V 16V 25V 35V Characteristics Z(-25℃)/Z(+20℃) 3 2 2 2 (Max. impedance Ratio) Z(-40℃)/Z(+20℃) 4 3 3 3 (at 120Hz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 3,000 hours (2,000 hours for F80 size) at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value F80 HA0 JA0 ESR after 2,000 hours 20℃ 3.5 0.60 0.40 (Ω max./100kHz) -40℃ 40 4.5 3.5 Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value ◆DIMENSIONS [mm] ● Terminal Code : A ● Terminal Code : G(Vibration resistant structure) ● Size code : F80 to JA0 ● Size code : HA0 to JA0 Size code φD L A B C W P F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9 Vent for JA0 0.3max. W Vent for JA0 HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1 W JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5 5 φD±0.5 B0.2± P C0.2± φD±0. B0.2± P C0.2± 0.3max. A±0.2 L±0.5 A±0.2 L±0.5 (Note) Note : L±0.3 for F80 : Dummy terminals ◆PART NUMBERING SYSTEM ◆MARKING ●Rated voltage symbol E1 M2 H3 J4 A5 A6 A7 A8 D9 A10 A11 A12 A13 M14 A15 A16 A17 G18 EX) 16V100µF Rated voltage (Vdc) Symbol 5j 10 A Supplement code 100 16 C Size code CHJ 25 E Capacitance tolerance code 35 V Capacitance code (ex. 47µF:470, 100µF:101) Taping code Terminal code (A, G) Voltage code (ex. 16V:160, 35V:350) Series code Category Please refer to "Product code guide (surface mount type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 114 CAT. No. E1001O

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS High heat resistance, 125℃ MHJ AIchipTM- Series ◆STANDARD RATINGS WV Cap ESR (Ω max./100kHz) Rated ripple current Size code Part No. (Vdc) (µF) 20℃ －40℃ (mArms/125℃, 100kHz) 220 HA0 0.15 3.0 350 EMHJ100□DA221MHA0G 330 HA0 0.15 3.0 350 EMHJ100□DA331MHA0G 10 330 JA0 0.12 2.0 550 EMHJ100□DA331MJA0G 470 JA0 0.12 2.0 550 EMHJ100□DA471MJA0G 100 F80 0.45 5.0 220 EMHJ160ADA101MF80G 100 HA0 0.15 3.0 350 EMHJ160□DA101MHA0G 16 220 HA0 0.15 3.0 350 EMHJ160□DA221MHA0G 330 JA0 0.12 2.0 550 EMHJ160□DA331MJA0G 470 JA0 0.12 2.0 550 EMHJ160□DA471MJA0G 100 HA0 0.15 3.0 350 EMHJ250□DA101MHA0G 25 220 JA0 0.12 2.0 550 EMHJ250□DA221MJA0G 330 JA0 0.12 2.0 550 EMHJ250□DA331MJA0G 47 F80 0.45 5.0 220 EMHJ350ADA470MF80G 47 HA0 0.15 3.0 350 EMHJ350□DA470MHA0G 35 100 HA0 0.15 3.0 350 EMHJ350□DA101MHA0G 220 JA0 0.12 2.0 550 EMHJ350□DA221MJA0G □ : Enter the appropriate terminal code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 120 1k 10k 100k 47to100 0.40 0.75 0.90 1.00 220to470 0.50 0.85 0.94 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 115 CAT. No. E1001O

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: U nited Chemi-Con (UCC): EMHJ100ADA221MHA0G EMHJ100ADA331MHA0G EMHJ100ADA331MJA0G EMHJ100ADA471MJA0G EMHJ160ADA101MF80G EMHJ160ADA101MHA0G EMHJ160ADA221MHA0G EMHJ160ADA331MJA0G EMHJ160ADA471MJA0G EMHJ250ADA101MHA0G EMHJ250ADA221MJA0G EMHJ250ADA331MJA0G EMHJ350ADA101MHA0G EMHJ350ADA221MJA0G EMHJ350ADA470MF80G EMHJ350ADA470MHA0G