Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZC Type: V High temperature lead-free reflow UP GRADE Features ● Endurance: 4000 h at 125 °C (High temperature / Long life) ● Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) ● High-withstand voltage ( to 80 V.DC), Low LC (0.01 CV or 3 μA) ● Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. New lineup of φ6.3 product. (φ6.3, φ8, φ10) ● AEC-Q200 compliant ● RoHS compliant Specifications Size code C D D8 F G Category temp. range –55 ℃ to +125 ℃ Rated voltage range 25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC Nominal cap.range 10 μF to 33 μF 10 μF to 56 μF 22 μF to 100 μF 22 μF to 220 μF 33 μF to 330 μF Capacitance tolerance ±20 % (120 Hz / +20 ℃) DC leakage current I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +125 °C ± 2 ℃, 4000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Endurance 1 Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit +125 °C ± 2 ℃, 3000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within ±30% of the initial value Endurance 2 Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +125 °C ± 2 °C with no voltage applied and then being Shelf life stabilized at +20 °C,　capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 °C ± 2 ℃, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) Dissipation factor (tan δ) ≦ 200 % of the initial limit ESR ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) 0.3 max. A±0.2 ） Example : 25 V.DC 33 μF – K （I Marking color : BLACK 5 Negative polarity marking (–) ±0. H 0.2 P） Capacitance (μF) φD B± （ 33 + ） Series identification E ZC L W （I Pressure relief (φ10 and larger) Rated voltage mark ( )Reference size Unit：ｍｍ Size code φD L A,B H I W P K Lot number C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 +-00..2105 RatedE voltage ma2r5k J Un6it3：V.DC DD8 66..33 75..78±±00..33 66..66 77..88 mmaaxx.. 22..66 00..6655±±00..11 11..88 00..3355 ++--0000....22110055 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 V 35 K 80 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 H 50 ·The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Dec-18

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Characteristics list Endurance 1 : 125 ℃ 4000 h Endurance 2 : 125 ℃ 3000 h Case size Min.packaging Specification Part number (mm) q'ty Capaci- Rated v(oVl.tDaCg)e (±ta(2μn0Fc )%e) φD L cSoizdee Rip(mpleA cru.mrr.esn.)t *1 E(mSRΩ*)2 ta*n3 δ SPtraondduacrtd Vibrpartoiodnu-cptroof T(appcisn)g Endurance 1 Endurance 2 33 5.0 5.8 C 550 – 80 0.14 EEHZC1E330R – 1000 56 6.3 5.8 D 900 – 50 0.14 EEHZC1E560P 1000 25 100 6.3 7.7 D8 1400 – 30 0.14 EEHZC1E101XP EEHZC1E101XV 900 220 8.0 10.2 F 1600 1900 27 0.14 EEHZC1E221P EEHZC1E221V 500 330 10.0 10.2 G 2000 2900 20 0.14 EEHZC1E331P EEHZC1E331V 500 22 5.0 5.8 C 550 – 100 0.12 EEHZC1V220R – 1000 47 6.3 5.8 D 900 – 60 0.12 EEHZC1V470P EEHZC1V470V 1000 35 68 6.3 7.7 D8 1400 – 35 0.12 EEHZC1V680XP EEHZC1V680XV 900 150 8.0 10.2 F 1600 1900 27 0.12 EEHZC1V151P EEHZC1V151V 500 270 10.0 10.2 G 2000 2800 20 0.12 EEHZC1V271P EEHZC1V271V 500 10 5.0 5.8 C 500 – 120 0.10 EEHZC1H100R – 1000 22 6.3 5.8 D 750 – 80 0.10 EEHZC1H220P EEHZC1H220V 1000 33 6.3 7.7 D8 1100 – 40 0.10 EEHZC1H330XP EEHZC1H330XV 900 50 68 8.0 10.2 F 1250 – 30 0.10 EEHZC1H680P EEHZC1H680V 500 100 10.0 10.2 G 1600 – 28 0.10 EEHZC1H101P EEHZC1H101V 500 120 10.0 10.2 G 1600 – 28 0.10 EEHZC1H121P EEHZC1H121V 500 10 6.3 5.8 D 700 – 120 0.08 EEHZC1J100P EEHZC1J100V 1000 22 6.3 7.7 D8 900 – 80 0.08 EEHZC1J220XP EEHZC1J220XV 900 33 8.0 10.2 F 1100 – 40 0.08 EEHZC1J330P EEHZC1J330V 500 63 NEW 47 8.0 10.2 F 1100 – 40 0.08 EEHZC1J470P EEHZC1J470V 500 56 10.0 10.2 G 1400 – 30 0.08 EEHZC1J560P EEHZC1J560V 500 68 10.0 10.2 G 1400 – 30 0.08 EEHZC1J680P EEHZC1J680V 500 82 10.0 10.2 G 1400 – 30 0.08 EEHZC1J820P EEHZC1J820V 500 22 8.0 10.2 F 1050 – 45 0.08 EEHZC1K220P EEHZC1K220V 500 80 33 10.0 10.2 G 1360 – 36 0.08 EEHZC1K330P EEHZC1K330V 500 47 10.0 10.2 G 1360 – 36 0.08 EEHZC1K470P EEHZC1K470V 500 *1: Ripple current (100 kHz　/ +125 ℃) *2: ESR (100 kHz / +20 ℃) *3: tan δ (120 Hz / +20 ℃) ・ Please refer to the page of “Reflow profile” and “The taping dimensions”. ・ The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitance（C）Frequency (f) 100Hz ≦ f＜ 200Hz 200Hz ≦ f＜ 300Hz 300Hz ≦ f＜ 500Hz 500Hz ≦ f＜ 1kHz C ＜ 47μF 0.10 0.10 0.15 0.20 Correction 47μF ≦ C ＜ 150μF 0.15 0.20 0.25 0.30 factor 150μF ≦ C 0.15 0.25 0.25 0.30 Rated capacitance（C）Frequency (f) 1kHz ≦ f＜ 2kHz 2kHz ≦ f＜ 3kHz 3kHz ≦ f＜ 5kHz 5kHz ≦ f＜ 10kHz C ＜ 47μF 0.30 0.40 0.45 0.50 Correction 47μF ≦ C ＜ 150μF 0.40 0.45 0.55 0.60 factor 150μF ≦ C 0.45 0.50 0.60 0.65 Rated capacitance（C）Frequency (f) 10kHz ≦ f＜ 15kHz 15kHz ≦ f＜ 20kHz 20kHz ≦ f＜ 30kHz 30kHz ≦ f＜ 40kHz C ＜ 47μF 0.60 0.65 0.70 0.75 Correction 47μF ≦ C ＜ 150μF 0.70 0.75 0.80 0.80 factor 150μF ≦ C 0.75 0.80 0.85 0.85 Rated capacitance（C）Frequency (f) 40kHz ≦ f＜ 50kHz 50kHz ≦ f＜ 100kHz 100kHz ≦ f＜ 500kHz 500kHz ≦ f C ＜ 47μF 0.80 0.85 1.00 1.05 Correction 47μF ≦ C ＜ 150μF 0.85 0.90 1.00 1.00 factor 150μF ≦ C 0.85 0.90 1.00 1.00 After endurance ESR (100 kHz, –40 °C) Size φ5ｘL5.8 φ6.3ｘL5.8 φ6.3ｘL7.7 φ8ｘL10.2 φ10ｘL10.2 ESR（Ω） 2 1.4 0.8 0.4 0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Dec-18