Datasheet Panel Mount Series 1 240 VAC • Ratings from 10A to 125A @ 24-280 VAC • AC or DC control • SCR output for heavy industrial loads • Direct bond copper substrate • Zero voltage or instantaneous turn-on outputs • EMC compliant to Level 3 • UL/CSA/VDE Approved, CE Compliant to EN60950-1 • Direct power lead frame • Improved SEMS screw and washer • Epoxy free design • Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10A 25A 50A 75A 90A 110A 125A 3-32 VDC D2410 D2425 D2450 D2475 D2490 D24110 D24125 90-280 VAC A2410 A2425 A2450 A2475 A2490 A24110 A24125 18-36 VAC A2410E A2425E A2450E A2475E A2490E A24110E A24125E AVAILABLE OPTIONS Control Voltage A: 90-280 VAC Overvoltage Protection Snubber Switching Type D: 4-32 VDC Blank: Not Included Blank: Not Included Blank: Zero Voltage Turn-On AxxxxE: 18-36 VAC P: Included(3) S: Included -10: Instantaneous Turn-On(4) A 24 10 E K P G S H -10 Operating Rated Load Current Termination Input Status LED Thermal Pad Voltage 10: 10 Amps Blank: Screw Blank: Not Included Blank: Not Included 24: 24-280 VAC 25: 25 Amps F: Quick Connect(1) G: Included H: Included 50: 50 Amps (Up to 50 Amps only) 75: 75 Amps K: Hex standoffs(2) 90: 90 Amps Required for valid part number 110: 110 Amps For options only and not required for valid part number 125: 125 Amps *Not all part number combinations are available. Contact Crydom Technical support for information on the availability of a specific part number. OUTPUT SPECIFICATIONS(5) Description 10A 25A 50A 75A 90A 110A 125A Operating Voltage (47-440Hz) [Vrms] (6) 24-280 24-280 24-280 24-280 24-280 24-280 24-280 Transient Overvoltage [Vpk] (3) 600 600 600 600 600 600 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] (7) 1 1 1 1 1 1 1 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500 500 500 Maximum Load Current [Arms] (2)(8) 10 25 50 75 90 110 125 Minimum Load Current [mArms] 150 150 150 150 150 250 250 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 115/120 239/250 597/625 954/1000 1145/1200 1432/1500 1670/1750 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.30 1.15 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) [°C/W] 1.03 0.8 0.45 0.3 0.27 0.25 0.22 Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 66/60 285/259 1770/1621 4555/4150 6560/5976 10249/9338 13950/12709 Minimum Power Factor (at Maximum load) (3) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 FDE-07-01 REV. A Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount INPUT SPECIFICATIONS (5) Description D24xx A24xx A24xxE Control Voltage Range 3-32 VDC 90-280 Vrms 18-36 Vrms Maximum Reverse Voltage -32 VDC - - Minimum Turn-On Voltage 3.0 VDC(9) 90 Vrms 18 Vrms Must Turn-Off Voltage 1.0 VDC 10 Vrms 4 Vrms Minimum Input Current [mA] 7 5 16 Maximum Input Current [mA] 12 10 20 Nominal Input Impedance [Ohms] Current Regulated Maximum Turn-On Time [msec] 1/2 Cycle(10) 20 20 Maximum Turn-Off Time [msec] 1/2 Cycle 30 30 GENERAL SPECIFICATIONS (5) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 VDC) 109 Ohm Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 2.6 oz (74.9g) Housing Material 94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (2) w/”K” option 8-10 / 0.9-1.13 Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator w/”G” option (green) MTBF (Mean Time Between Failures) at 40°C ambient temperature (11) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60°C ambient temperature (11) 7,210,376 hours (823 years) WIRING DIAGRAM AC Recommended Wire Sizes Input Current vs Input Voltage V Standard Regulated DC Input Terminals Wire Size Wire Pull-Out 25 Load (12) (Solid / Stranded) Strength (lb)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] A) 20 1 ( ) 2 ( ) Input 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] ent (m 15 urr 20 AWG (0.5 mm2) / 0.518 [minimum] 30 [133] ut C 10 p 1 OUTPUT 2 Output 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] In 5 SOLID STATE RELAY 2 x 8 AWG (8.4 mm2) / 8.4 [maximum] 90 [400] 0 0 5 10 15 20 25 30 4 INPUT 3 DC Input Voltage 4 (– / ) 3 (+ / ) EQUIVALENT CIRCUIT BLOCK DIAGRAMS Diagram: Series 1 AC control Diagram: Series 1 DC control AC 4 1 AC -DC 4 1 AC Current Limiter (13) AC/DC Trigger (14) Trigger (14) Converter Circuit Circuit (13) (15) (15) AC 3 2 AC +DC 3 2 AC Current Limiter Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount MECHANICAL SPECIFICATIONS(5) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination Hex Standoff Termination (“K” Option)(2) [217.1.9] Mounting [02.28.96] [021.74.1.99] MHooluen/Stilnogt [12.60.44] 0.49 Hole/Slot 0.19 [4.9] [12.4] [12.4] 0.19 [4.9] DIA. DIA. 1 OUTPUT 2 1 OUTPUT 2 [14.78.86] SOLID STATE RELAY [413.7.2] [25.72.53] [14.78.86] SOLID STATE RELAY [14.37.02 ] [25.72.53] 4 INPUT 3 4 INPUT 3 1.0 0.93 1.0 [25.4] [23.6] [25.4] (4 places) 1.75 1.75 [44.5] 1.0 [44.5] [25.4] (2 places) Quick Connect Termination (“F” Option) - Up to 25 Amp (1) Quick Connect Termination (“F” Option) - Up to 50 Amp (1) 1.58 1.1 Faston Terminal(16) [40.2] Faston Terminal(16) 1.31 [27.9] 0.25 x 0.032 1.31 MH0.oo1l9ue n/[S4ti.ln9og]t [01.24.94] 0(2.2 p5 lxa 0c.e03s2) [33.4] MH0.oo1l9ue n/[S4ti.ln9og]t [01.66.30] (04.4 p5laces) [33.4] DIA. DIA. [11.4] (2 places) 1 OUTPUT 2 1 OUTPUT 2 1.88 SOLID STATE RELAY 1.7 2.25 1.88 SOLID STATE RELAY 1.7 2.25 [47.6] [43.2] [57.3] [47.6] [43.2] [57.3] 4 INPUT 3 4 INPUT 3 1.40 0.49 [35.6] Faston Terminal(16) [12.4] Faston Terminal(16) [14.47.55] 0(.21 8p7l ax c0e.0s2)0 [13.12.58] [13.54.06 ] 0(.21 8p7l ax c0e.0s2)0 [13.12.58] 1.75 [44.5] GENERAL NOTES (1) Single pair (up to 25A) Double pair* (up to 50A). *Caution: User must connect both pairs. (2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50 Amps. For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support. (3) Output will self trigger between 450-600Vpk, Min. power factor 0.7 or higher, not suitable for capacitive loads. (4) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only. (5) All parameters at 25°C unless otherwise specified. (6) For “S” option, operating voltage frequency is 47-63Hz. (7) For parts with option “S” maximum leakage current is 10mA. (8) Heat sinking required, see derating curves. (9) Increase minimum voltage by 1V for operations from -20 to -40°C. (10) Turn-on time for instantaneous turn-on versions is 0.02 msec (DC control Models). (11) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). (12) Load can be wired to either SSR output terminal 1 or 2. (13) Elective Input Status LED, “G” option (14) Elective Overvoltage Protection, “P” option. (15) Elective Internal Snubber, “S” option. (16) Mechanical dimensions vary from G3 models. For additional information or specific questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount SURGE CURRENT INFORMATION 10 A 25 A 120 250 p)100 p)200 m m A 80 A nt ( nt (150 e 60 e urr urr100 e C 40 e C g g ur 20 ur 50 S S 0 0 0.01 0.1 1 10 0.01 0.1 1 10 Surge Duration (Secs) Surge Duration (Secs) 50 A 75 A 600 900 800 500 p) p)700 m m A400 A600 nt ( nt (500 e300 e urr urr400 e C200 e C300 urg100 urg200 S S100 0 0 0.01 0.1 1 10 0.01 0.1 1 10 Surge Duration (Secs) Surge Duration (Secs) 90 A 110 A 1200 1500 1050 mp)900 mp)1200 A A nt (750 nt (900 e600 e Curr450 Curr600 ge 300 ge ur ur300 S150 S 0 0 0.01 0.1 1 10 0.01 0.1 1 10 Surge Duration (Secs) Surge Duration (Secs) 125 A 1800 1600 p)1400 m A1200 nt (1000 e urr 800 e C 600 urg 400 S 200 0 0.01 0.1 1 10 Surge Duration (Secs) Non repetitive peak surge current at Tj initial 40ºC. Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount THERMAL DERATE INFORMATION 10 A 25 A 50 A 3ºC/W 5ºC/W No Heatsink 1.5ºC/W 2ºC/W 3ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W 2ºC/W 10 25 50 ps) 8 ps)20 ps)40 m m m A A A nt ( 6 nt (15 nt (30 e e e urr 4 urr10 urr20 C C C ad 2 ad 5 ad 10 o o o L L L 0 0 0 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC) 75 A 90 A 110 A 0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W 0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W 0.5ºC/W 0.7ºC/W 1ºC/W 1.5ºC/W 75 90 120 80 Load Current (Amps)64310505 Load Current (Amps)75316420000000 Load Current (Amps)10684200000 0 0 0 20 30 40 50 60 70 80 20 30 40 50 60 70 80 20 30 40 50 60 70 80 Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC) 125 A 0.5ºC/W 0.7ºC/W 1ºC/W 120 ps)100 m A 80 ent ( 60 Curr 40 d oa 20 L 0 20 30 40 50 60 70 80 Ambient Temperature (ºC) Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount AGENCY APPROVALS EN60950 : Meets the requirements of sections 1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 3 IEC 61000-4-5 : Electrical Surges – Level 3 IEC 60068-2-6 : Vibration 0.33mm and 0.75 mm Amplitude over 10-55 Hz IEC 60068-2-27 : Shock Resistance 15g/11ms E116949 LR81689 10143 UG ACCESORIES Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Cover Hardware Heat Sink Thermal Resistance Lug Terminal Thermal Pad Part number: KS101 Kit Part No. [ºC/W] Clear plastic cover compatible with all new KS101 HK1 HS501DR 5.0 TRM1 HSP-1 S1 designs. Safety covers provide added protection from electric shock when HK4 HS301 / HS301DR 3.0 TRM6 HSP-2 installing or checking equipment. HS251 2.5 HS202 / HS202DR 2.0 HS201 / HS201DR 2.0 Hardware Kit HS172 1.7 Part number: HK4 HS151 / HS151DR 1.5 Bag with 2 square brass accessories and 2 HS122 / HS122DR 1.2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals. HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 101818 ECN#20571 Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Datasheet Panel Mount ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: D2490-10 D2450-10 D2475-10 A2425 D2410 D2490 A2410 A2450 A2475 A24110 A2425-10 D2425-10 A24125 D24125-10 D2425 D2450 D2475 D2410-10 D24125 D24110 4D2410 4D2425 4D2450 A2410-10 A2410E A2410E-10 A24110-10 A24110E A24125-10 A24125E A2425E A2425E-10 A2440-10 A2450-10 A2450E-10 A2475-10 A2475E A2490 A2490-10 A2490E D2410F D24110-10 D2425F D2425F-10 A2450E A2440 D2425K D2425K-10 A2410F D2450PG D2425PG D2410PG D2425P D2450K A2450F D2410G D2425G D2450G D2410K D2450GH A2410PG A2450PG A2490PG A24110PG D2410FPG-10 A2450G A2490H-10 A2410G A2475K-10 A2450KPS-10 A2450EG A2450EGH A2450GH D2450F D2425H D2475PG D2490PG D24110PG D24125G D24125PG A2475PG D2450KG D2410K-10 A2450EK A2425K-10 A2425EK A2450K A2425K D2450K-10 D2475K-10 A2410K D2425KS D2425S D2475S-10 D2450KS-10 A2425S A2425GH A2425EG D2425KG A2425PG