NT *RoHS VCEOARVMSIAPILOLINAASB LE Features NT MPLIA n RoHS compliant* n Three layer contacting process with RoHS CO n CPRow08e0r 5ra -t in0g.1 2at5 7 W0 ,° CCR: C1R20066 0-3 0 -.2 05. 1W0 W , npircokveidl ebsa rerxiecre pllerenvt esnotlsd eleraacbhiliintyg and * 0 n Tight tolerances of bottom electrode n Paper tape on reel for automatic 1R width placement n Suitable for all types of soldering processes REE D F LEA CR0603/CR0805/CR1206 - Chip Resistors Electrical Characteristics OCPohpwaerreaart ciRnteagtr iTinsegtmi c@p e7r0a t°uCre Range LVEREAoRDH SISF ORCNEOSE MAPRLIE ANT* Mod1e/l1 C0 RW0 603 -5M5o °dCe1 t/lo 8C +WR10 5850 °5C Mode1/l 4C WR1206 Derated to 0 Load at +155 °C Maximum Working Voltage 50 V 150 V 200 V Maximum Overload Voltage 100 V 300 V 400 V 10 ohms ≤ R ≤ 1M ohms ±100 PPM/°C Resistance Range: 1 % E-96 + E-24 1M ohms < R ≤ 10M ohms ±200 PPM/°C 10 ohms ≤ R ≤ 10M ohms ±200 PPM/°C Resistance Range: 5 % E-24 1 ohm ≤ R < 10 ohms 10M ohms < R ≤ 20M ohms ±400 PPM/°C Zero Ohm Jumper <0.05 ohm 1 A / 2.5 A 2 A / 5 A 2 A / 5 A Rated / Maximum Current AEC-Q200: Contact Bourns to confirm availiability. For Standard Values Used in Capacitors, Inductors, and Resistors, click here. Chip Dimensions DimCehnasrioancatle Drirsatwicin gDsata Model Model Model I1 I1 Dimension CR0603 CR0805 CR1206 1.60±0.10 2.00±0.15 3.20±0.25 L H (0.063±0.004) (0.079±0.006) (0.126±0.010) 0.80±0.10 1.25±0.15 1.60±0.15 W (0.031±0.004) (0.049±0.006) (0.063±0.006) I2 I2 0.45±0.10 0.50±0.10 0.60±0.15 W H (0.018±0.004) (0.020±0.004) (0.024±0.006) L 0.30±0.20 0.40±0.20 0.50±0.25 Resistor (Ru02) Overcoat I1 (0.012±0.008) (0.016±0.008) (0.020±0.010) (Jumper chip is a conductor) 0.30±0.20 0.40±0.20 0.50±0.20 I2 (0.012±0.008) (0.016±0.008) (0.020±0.010) MM DIMENSIONS: (INCHES) Derating Curve Alumina Substrate Internal Electrode (Ag) 100 Secondary Electrode (Nickel Plated) External Electrode %) (tin-plated) 80 er ( w 60 Po *RoHS Directive 2002/95/EC Jan. 27, 2003 including d 40 annex and RoHS Recast 2011/65/EU June 8, 2011. e at Specifications are subject to change without notice. R 20 The device characteristics and parameters in this data sheet can and do vary in different applications and 0 actual device performance may vary over time. -55 0 70 155 Users should verify actual device performance in their Ambient Temperature (°C) specific applications.

CR0603/CR0805/CR1206 - Chip Resistors Performance Characteristics Test Limits DR Test Procedure Method Specification 1 % 5 % MIL-STD-202 303 DC Resistance -- MIL-R-55342D 4.7.2 ≤±1 % ≤±5.0 % EIA RS-396 4.4 Low Temperature -55 °C, 1 hour “OFF”; MIL-R-55342D 4.7.4 MIL-R-55342D 4.7.4 ≤±(0.5 % + 0.05 Ω) ≤±(1.0 % + 0.05 Ω) Operation 45 minutes "ON" EIA RS-396 4.6 Rated Voltage x 2.5, 5 seconds: Short time MIL-R-55342D 4.7.5 CR0603: 100 V max. MIL-R-55342D 4.7.5 ≤±(1 % + 0.05 Ω) ≤±(2 % + 0.05 Ω) Overload EIA RS-396 4.7 CR0805: 300 V max. CR1206: 400 V max. High Temperature MIL-R-55342D 4.7.6 +125 °C, 1000 hours MIL-R-55342D 4.7.6 ≤±(1.0 % + 0.05 Ω) ≤+(2.0 % + 0.1 Ω) Exposure EIA RS-396 4.8 Resistance to 260 °C, 10 seconds MIL-R-55342D 4.7.7 MIL-R-55342D 4.7.7 ≤±(0.5 % + 0.05 Ω) ≤±(1.0 % + 0.05 Ω) Solder Heat Moisture Resis- MIL-STD-202 106D 90-98 % RH, 10 cycles MIL-R-55342D 4.7.8 ≤±(0.5 % + 0.05 Ω) ≤±(2.0 % + 0.05 Ω) tance EIA RS-396 4.9 MIL-STD-202 108 +70 °C; 1.5 hours “ON”, Load Life Condition D MIL-R-55342D 4.7.10 ≤±(1.0 % + 0.05 Ω) ≤±(3.0 % + 0.1Ω) 0.5 hours “OFF”; 1000 hours EIA RS-396 4.12 MIL-STD-202 208 Solderability +235 °C; 3 seconds MIL-R-55342D 4.7.11 ≥95 % of area covered EIA RS-396 4.11 Terminal Strength Pull Test MIL-R-55342D 4.7.12 MIL-R-55342D 4.7.12 ≥500 g R≤1 kW; 1 mV/V max. R≤10 kW; 3 mV/V max. Current Noise Quan-Tech Model 315B MIL-STD-202 308 MIL-R-55342D 6.6 R≤100 kW; 6 mV/V max. R≤1 MW; 10 mV/V max. Humidity, Steady +40 °C; 90-95 % RH, MIL-STD-202 103B -- ≤±(2.5 % + 0.05 Ω) ≤±(2.5 % + 0.05 Ω State 1344 hours Condition D MIL-STD-202 101D Salt Spray 96 hours -- ≤±(1.0 % + 0.2 Ω) ≤±(1.0 % + 0.1 Ω Condition A Vibration 10-2000 Hz, 6 hours MIL-STD-202 201A -- ≤±(0.5 % + 0.1 Ω) ≤±(1.0 % + 0.1 Ω Voltage Coefficient -- MIL-STD-202 309 -- ≤100 ppm/V Insulation Resis- Test potential: 500V MIL-STD-202 302 -- ≥1 GΩ tance CR0603: 100 V Condition B Dielectric With- CR0805, CR1206: ≥500 V -- MIL-STD-202 301 -- standing Voltage CR0603: ≥300 V Drop Test 1 m MIL-STD-202 203B -- ≤±(0.5 % + 0.1 Ω) ≤±(1 % + 0.1 Ω Bending Test 5 mm/90 mm, 10 seconds -- -- ≤±(1 % + 0.05 Ω) ≤±(1 % + 0.05 Ω) -55 °C for 30 minutes, Thermal Shock +155 °C for 30 minutes, IEC 60115-1-4.19 -- ≤±(0.5% + 0.05 Ω) ≤±(1 % + 0.05 Ω) 5 cycles Resistance to Dry 125 ±5 °C for 96 ±4 hours IEC 60115-1-4.23.2 -- ≤±(1 % + 0.05 Ω) ≤±(2 % + 0.1 Ω) Heat Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CR0603/CR0805/CR1206 - Chip Resistors Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 <1>Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C < 1 > 255 °C 225 220 °C e (°C)175 190 °C s6e0c o- n9d0s ur 150 °C Ramp Down erat 6 °C/second p m Te125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 200 250 300 Time (seconds) Packaging Dimensions (Conforms to EIA RS-481A) 4.0 ± 0.1 1.0 ± 0.2 (.157 ± .004) (.040 ± .020) B 2.0 ± 0.05 (.079 ± .002) A 3.5 ± 0.05 (.138 ± .002) 2.0 (.080) 8.0 ± 0.2 (.315 ± .008) 13.0 ± 0.5 (.512 ± .020) 1.75 ± 0.1 80.0 ± 1.0 4.0 ± 0.1 (.059 ± .004) (3.150 ± .040) 1.5 +0.1/-0 (.157 ± .004) (.056 + .004/-0) Maximum 1 mm (.040) thick 20.5 *Cumulative tolerance over 10 holes: ±0.2 mm (.807) 178.0 ± 2.0 (7.008 ± .080) Series A B CR0603 1.9 ± 0.2 1.1 ± 0.2 10.0 ± 1.5 (.075 ± .008) (.043 ± .008) (.394 ± .059) CR0805 2.4 ± 0.2 1.65 ± 0.2 (.094 ± .008) (.065 ± .008) MM DIMENSIONS: CR1206 3.57 ± 0.2 2.00 ± 0.2 (INCHES) (.161 ± .008) (.079 ± .008) Marking on reel: Part number, quantity, resistance value and tolerance, date code. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CR0603/CR0805/CR1206 - Chip Resistors Resistor Markings Marking Explanation • E-24: 3 digits, first two digits are CR0603 CR0805 CR0603 significant, third digit is number of CR0805 CR1206 EIA-96 Marking zeros. CR1206 Letter R is decimal point. • E-96: 4 digits, first three digits are significant, fourth digit is number of zeros. Letter R is decimal point. E-24 marking E-96 marking 1 % marking 0603 E-96: EIA-96 marking (see table Value = 10K ohms Value = 44.2K ohms Value = 12.4K ohms below). EIA-96 Marking for CR0603, 1 % Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 84 732 96 976 This table shows the first two digits for the three-digit EIA-96 part marking scheme. The third character is a letter multiplier: Y=10-2 X=10-1 A=100 B=101 C=102 D=103 E=104 F=105 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

CR0603/CR0805/CR1206 - Chip Resistors How To Order CR 1206 - F X - 8252 E LF Model (CR = Chip Resistor) Size • 0603 • 0805 • 1206 Resistance Tolerance F = ±1 % ................Use with “X” TCR code only for values from 10 ohms through 1 megohm; Use with “W” TCR code only for values from 1 megohm through 10 megohms. J = ±5 % .................Use with “W” TCR code for values from 10 ohms through 10 megohms; Use with “Z” TCR code for values above 10 megohms through 20 megohms; Use with “/” TCR code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. TCR (ppm/°C) X = ±100 W = ±200 Z = ±400 / = Used with “J” Resistance Tolerance code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. Resistance Value For 1 % Tolerance: <100 ohms...............“R” represents decimal point (example: 24R3 = 24.3 ohms). ≥100 ohms...............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k ohms). For 5 % Tolerance: <10 ohms.............“R” represents decimal point (example: 4R7 = 4.7 ohms). ≥10 ohms.............First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper). Packaging E = Paper Tape (5,000 pcs.) on 7 ” Plastic Reel Termination LF = Tin-plated (RoHS Compliant) REV. 11/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B ourns: CR0603-JW-222ELF CR0805-JW-364ELF CR0603-JW-240ELF CR1206-JW-102ELF CR0603-JW-102ELF CR1206-JW-333ELF CR0603-JW-272ELF CR0603-JW-470ELF CR0603-JW-270ELF CR0603-JW-472ELF CR1206- JW-100ELF CR0603-JW-105ELF CR0603-J/-3R0ELF CR0805-JW-103ELF CR0603-JW-152ELF CR0603-JW- 104ELF CR0603-JW-750ELF CR0603-JW-360ELF CR0603-JW-220ELF CR0603-JW-103ELF CR0603-J/-5R1ELF CR0603-JW-330ELF CR0603-JW-180ELF CR0603-JW-392ELF CR0603-JW-221ELF CR1206-JW-300ELF CR0805- JW-242ELF CR0603-JW-241ELF CR0603-JW-473ELF CR0603-JW-561ELF CR0603-JW-121ELF CR0805-J/- 1R2ELF CR0805-J/-1R3ELF CR0805-J/-1R5ELF CR0805-J/-1R6ELF CR0805-J/-1R8ELF CR0805-J/-2R0ELF CR0805-J/-2R2ELF CR0805-J/-2R4ELF CR0805-J/-2R7ELF CR0805-J/-3R0ELF CR0805-J/-3R3ELF CR0805-J/- 3R6ELF CR0805-J/-3R9ELF CR0805-J/-4R3ELF CR0805-J/-4R7ELF CR0805-J/-4R7GLF CR0805-J/-5R1ELF CR0805-J/-5R6ELF CR0805-J/-6R2ELF CR0805-J/-6R8ELF CR0805-J/-7R5ELF CR0805-J/-8R2ELF CR0805-J/- 9R1ELF CR0805-JW-100ELF CR0805-JW-100GLF CR0805-JW-101ELF CR0805-JW-101GLF CR0805-JW-102ELF CR0805-JW-102GLF CR0805-JW-103GLF CR0805-JW-104ELF CR0805-JW-104GLF CR0805-JW-105ELF CR0805-JW-106ELF CR0805-JW-106GLF CR0805-JW-110ELF CR0805-JW-111ELF CR0805-JW-112ELF CR0805- JW-113ELF CR0805-JW-114ELF CR0805-JW-115ELF CR0805-JW-120ELF CR0805-JW-121ELF CR0805-JW- 122ELF CR0805-JW-123ELF CR0805-JW-124ELF CR0805-JW-125ELF CR0805-JW-130ELF CR0805-JW-131ELF CR0805-JW-132ELF CR0805-JW-133ELF CR0805-JW-133GLF CR0805-JW-134ELF CR0805-JW-135ELF CR0805- JW-150ELF CR0805-JW-150GLF CR0805-JW-151ELF CR0805-JW-152ELF CR0805-JW-152GLF CR0805-JW- 153ELF CR0805-JW-153GLF CR0805-JW-154ELF CR0805-JW-155ELF CR0805-JW-160ELF CR0805-JW-161ELF CR0805-JW-162ELF CR0805-JW-163ELF CR0805-JW-164ELF CR0805-JW-165ELF