CPC1016N Single-Pole, Normally Open 4-Lead SOP OptoMOS® Relay I C D NTEGRATED IRCUITS IVISION Parameter Rating Units Description Blocking Voltage 100 VP CPC1016N is a miniature, low-voltage, low Load Current 100 mA / mA on-resistance, normally open (1-Form-A) solid state rms DC On-Resistance (max) 16  relay in a 4-lead SOP package. The relay uses optically coupled MOSFET technology to provide 1500V of input/output isolation. The efficient rms Features MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS (cid:129) 1500V Input/Output Isolation rms architecture while the optically coupled output is (cid:129) 100% Solid State controlled by a highly efficient GaAIAs infrared LED. (cid:129) Low Drive Power Requirements (TTL/CMOS Compatible) The CPC1016N uses IXYS Integrated Circuits (cid:129) Arc-Free With No Snubbing Circuits Division’s state of the art double-molded vertical (cid:129) No EMI/RFI Generation construction packaging to produce a very compact (cid:129) Machine Insertable, Wave Solderable solid state relay that is ideal for replacing larger, (cid:129) Tape & Reel Version Available less-reliable reed and electromechanical relays. Approvals Applications (cid:129) UL Recognized Component: File E76270 (cid:129) Instrumentation (cid:129) CSA Certified Component: Certificate 1175739 (cid:129) Multiplexers (cid:129) EN/IEC 60950-1 Certified Component: (cid:129) Data Acquisition TUV Certificate B 09 07 49410 004 (cid:129) Electronic Switching (cid:129) I/O Subsystems (cid:129) Meters (Watt-Hour, Water, Gas) Ordering Information (cid:129) Medical Equipment—Patient/Equipment Part # Description Isolation CPC1016N 4-Lead SOP (100/tube) (cid:129) Security Systems CPC1016NTR 4-Lead SOP (2000/reel) (cid:129) Aerospace (cid:129) Industrial Controls (cid:129) Reed Relay Replacement Pin Configuration 1 4 + Control Load 2 3 - Control Load Switching Characteristics of Normally Open Devices Form-A I F 90% I 10% LOAD t t on off e Pb 3 DS-CPC1016N-R08 www.ixysic.com 1

I C D CPC1016N NTEGRATED IRCUITS IVISION Absolute Maximum Ratings @ 25ºC Parameter Ratings Units Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to Blocking Voltage 100 V P the device. Functional operation of the device at conditions Reverse Input Voltage 5 V beyond those indicated in the operational sections of this Input Control Current 50 mA data sheet is not implied. Peak (10ms) 1 A Input Power Dissipation 70 mW Total Power Dissipation 1 400 mW Isolation Voltage, Input to Output 1500 V rms Operational Temperature -40 to +85 ºC Storage Temperature -40 to +125 ºC 1 Derate linearly 3.33 mW / ºC Electrical Characteristics @ 25ºC Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current Continuous 1 - I - - 100 mA / mA L rms DC Peak t=10ms I - - ±350 mA LPK P On-Resistance 2 I=100mA R - - 16  L ON Off-State Leakage Current V=100V I - - 1 A L P LEAK Switching Speeds Turn-On t - - 2 ms I =5mA, V=10V on Turn-Off F L t - - 0.5 ms off Output Capacitance V=50V, f=1MHz C - 25 - pF L OUT Input Characteristics Input Control Current to Activate I=100mA I - 0.5 2 mA L F Input Control Current to Deactivate - I 0.3 0.4 - mA F Input Voltage Drop I =5mA V 0.9 1.2 1.4 V F F Reverse Input Current V =5V I - - 10 A R R Common Characteristics Capacitance, Input to Output - C - 1 - pF I/O 1 Load current derates linearly from 100mA @ 25ºC to 80mA @ 85ºC. 2 Measurement taken within 1 second of on-time. 2 www.ixysic.com R08

I C D CPC1016N NTEGRATED IRCUITS IVISION PERFORMANCE DATA* Typical Turn-On Time Typical Turn-Off Time Typical On-Resistance Distribution (N=50, I=5mA, I=100mA, T =25ºC) (N=50, I=5mA, I=100mA, T =25ºC) (N=50, I=100mA, T =25ºC) F L A F L A L A 25 25 35 30 20 20 N) N) N) 25 unt ( 15 unt ( 15 unt ( 20 o o o C C C Device 105 Device 105 Device 1150 5 0 0 0 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.21 0.22 0.23 0.24 0.25 0.26 0.27 6.8 6.9 7.0 7.1 7.2 7.3 7.4 Turn-On (ms) Turn-Off (ms) On-Resistance ((cid:58)) Typical I for Switch Operation Typical I for Switch Dropout Typical Blocking Voltage Distribution F F (N=50, I=100mA, T =25ºC) (N=50, I=100mA, T =25ºC) (N=50, T =25ºC) L A L A A 25 25 35 30 20 20 Count (N) 15 Count (N) 15 Count (N) 2250 Device 105 Device 105 Device 1150 5 0 0 0 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.25 0.30 0.35 0.40 0.45 0.50 0.55 106 109 112 115 118 121 124 LED Current (mA) LED Current (mA) Blocking Voltage (V) P Typical Turn-On Typical Turn-Off Typical LED Forward Voltage Drop vs. LED Forward Current vs. LED Forward Current (N=50, I=5mA, T =25ºC) (I=80mA) (I=80mA) 35 F A 2.0 L 0.7 L 1.8 30 0.6 1.6 e Count (N) 221505 n-On (ms) 1110....4208 n-Off (ms) 000...543 evic 10 Tur 0.6 Tur 0.2 D 0.4 5 0.2 0.1 0 0 0 1.17 1.19 1.21 1.23 1.25 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage Drop Typical Turn-On vs. Temperature Typical Turn-Off vs. Temperature vs. Temperature (I=80mA) (I=80mA) 1.8 5.0 L 1.0 L V) 4.5 0.9 op ( 1.6 4.0 0.8 ge Dr 1.4 ms) 33..50 ms) 00..76 ward Volta 1.2 IIIFFF===551m00mmAAA Turn-On ( 221...505 IF=5mA Turn-Off ( 000...543 I=10mA For 1.0 IF=2mA 1.0 0.2 F LED 0.8 0.50 IF=10mA 0.10 IF=5mA -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. R08 www.ixysic.com 3

I C D CPC1016N NTEGRATED IRCUITS IVISION PERFORMANCE DATA* Typical I for Switch Operation Typical I for Switch Dropout F F vs. Temperature vs. Temperature Typical On-Resistance vs. Temperature (I=80mA) (I=80mA) (I=Max Rated @ Temperature) 1.8 L 1.8 L 14 L I=5mA 1.5 1.5 12 F nt (mA) 1.2 nt (mA) 1.2 nce ()(cid:58)10 Steady State IF=10mA D Curre 00..96 D Curre 00..96 Resista 86 InstIaF=n5tamnAeous LE LE On- 0.3 0.3 4 0 0 2 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Temperature (ºC) Typical Load Current vs. Load Voltage Typical Maximum Load Current Typical Blocking Voltage (I=5mA, T =25ºC) vs. Temperature vs. Temperature F A 150 120 122 Current (mA) 105000 Current (mA) 11111100950505 g Voltage (V)P 111122111098 Load -1-5000 Load 988050 IIFF==51m0mAA Blockin 111176 -150 75 115 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Load Voltage (V) Temperature (ºC) Temperature (ºC) Typical Leakage vs. Temperature Measured Across Pins 3&4 (V=100V) Energy Rating Curve L P 0.016 1.0 0.014 0.9 0.8 Leakage (A)(cid:80)00000.....000001100020864 Load Current (A) 000000......765432 0.002 0.1 0 0 -40 -20 0 20 40 60 80 100 10(cid:80)s 100(cid:80)s 1ms 10ms100ms 1s 10s 100s Temperature (ºC) Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 4 www.ixysic.com R08

I C D CPC1016N NTEGRATED IRCUITS IVISION Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1016N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1016N 260ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. e Pb 3 R08 www.ixysic.com 5

I C D CPC1016N NTEGRATED IRCUITS IVISION MECHANICAL DIMENSIONS CPC1016N 4.089 ± 0.203 Recommended PCB Land Pattern (0.161 ± 0.008) 0.200 ± 0.025 0.60 (0.008 ± 0.001) (0.0217) 3.810 ± 0.076 6.096 ± 0.102 (0.150 ± 0.003) (0.240 ± 0.004) 0.432 ± 0.127 (0.017 ± 0.005) 5.60 Pin 1 1.02 ± 0.025 (0.2205) (0.040 ± 0.001) 2.54 Typ 1.30 (0.100 Typ) (0.0512) 2.184 Max 2.54 (0.086 Max) (0.10) Lead to package standoff: 0.0637 ± 0.0383 (0.0025 ± 0.0015) 0.762 ± 0.102 0.381 TYP. Dimensions (0.030 ± 0.004) (0.015 TYP.) mm (inches) CPC1016NTR Tape & Reel 330.2 Dia (13.00 Dia) W=12.00 Top Cover B=4.70 (0.472) Tape Thickness (00.185) 0.102 Max (0.004 Max) K=2.70 A=6.50 P=8.00 (00.106) (00.256) (0.315) K=2.30 1 (0.091) UUsseerr DDiirreeccttiioonn ooff FFeeeedd Dimensions Embossed mm Carrier (inches) Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1016N-R08 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 6 12/13/2012

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I XYS: CPC1016N CPC1016NTR