2

Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering, manufacturing and sales personnel to provide the highest quality products with superior service. This is the Altech Commitment! With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure that we solve your problem the first time! Altech’s Commitment Altech’s Automation and Control components meet appli- cable national and international standards, such as UL, NEC, CSA, IEC and VDE. Altech provides these products with superior customer service and delivery through a ISO 9001 Quality Management system, which stresses continu- ous process improvement. We perform these services with honesty and integrity. All Altech employees are trained in this Quality Management System and are dedicated to achieve these goals. Altech’s quality system has been ISO approved since 1999.

DIN RAIL TERMINAL BLOCKS TABLE OF CONTENTS Spring Clamp Terminal Blocks Introduction ..........................................................62 Selection Guide ....................................................63 CX Series • Single Level Feed Through..........................64-65 • Multi Connection..........................................65-67 • Ground/ Earth...............................................68-70 • Double Level.....................................................71 • Electronic Component..................................72-73 • 5x20mm/ 5x25mm Fuse....................................74 • Component Carrier............................................75 • Disconnect.........................................................76 • Side Entry..........................................................77 Screw Clamp Terminal Blocks • Pluggable..........................................................78 • Hybrid Distribution.............................................79 Introduction Angular Terminal Blocks ............................................................4 Selection Guide ......................................................5 Feed Through Terminal Blocks • Feed-Through....................................................80 • Multi-Connection...............................................81 • Single Level......................................................6-8 • Multi-Level....................................................82-83 • Multi Connection..................................................9 • Ground/ Earth...............................................84-85 • Double Level................................................10-13 Accessories Spring Terminal Blocks • Triple Level...................................................14-15 ............86-87 Mini/ Panel Mount Terminal Blocks • Ground/ Earth...............................................16-17 Introduction/ Selection Guide Fuse Terminal Blocks .............................88 Screw Clamp Terminal Blocks • 5x20mm/ 5x25mm Fuse...............................18-19 • 15mm Mini Rail..................................................89 • Double Level Fuse Terminal.........................20-21 • Panel Mount......................................................90 • 6.35x25.4mm (¼” x 1”) Fuse.............................22 Spring Clamp Terminal Blocks • Component Carrier............................................23 • Fuse Holder..................................................24-25 • 15mm Mini Rail..................................................91 Disconnect & Test Terminal Blocks • Panel/ DIN Rail Mount.......................................92 • Micro Panel Mount............................................93 • Slider Style.............................................26-27, 30 High Temperature Ceramic ................................94 • Blade Style...................................................28-29 Terminal Strips – Eurostrip®Style • Lever Style........................................................31 Introduction/ Selection Guide Power Distribution Terminal Blocks .............................95 • 300V Flat Base, Feed Through....................96-97 • Multi I/O........................................................32-34 • 600V Standoff Feet, Feed Through..............98-99 • Hybrid Spring/ Screw.........................................35 • Pluggable.................................................100-101 • Distribution / Grounding System........................36 • Middle Barrier, Feed Through..................102-103 Special Application Terminal Blocks • Accessories Terminal Strips.....................104-105 Mounting & Marking – Accessories • 1000V High Voltage...........................................37 • Thermocouple...................................................38 • DIN Rail....................................................106-107 • Tab Connection.................................................39 • Support Brackets/ Mounting Clips...................108 • Spring Loaded..............................................40-41 • End Stops........................................................109 • Electronic Components................................42-47 • Group Identification Markers............................110 Accessories Screw Terminal Blocks • Marking Tags/ Warning Labels.........................111 .............48-49 • Plotter & Marking System.........................112-113 Stud/ Ring Lug Terminal Blocks Ferrules Introduction Introduction Selection Gu.i.d..e......................................................50 .................................................114-115 ....................................................51 • UL Ferrules...............................................116-117 • Ring Lug Barrier Terminal Blocks.................52-53 • Crimping Tools (UL Ferrules)....................118-120 • Ring Lug Stud Terminal Blocks....................54-55 • DIN Standard Ferrules.............................120-124 • Ring Lug Hinge Terminal Blocks..................56-57 • Crimping Tools (DIN Ferrules)..................125-127 • Ring Lug Power Terminal Blocks..................58-59 INDEX • High Current Power Terminal Blocks.................60 ...........................................................128-133 TERMS & CONDITIONS • Accessories Stud/ Ring Lug Terminal Blocks ...61 .....................................134 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 3

OVERVIEW INTRODUCTION SCREW TERMINAL BLOCKS SCREW CLAMP CONNECTION TECHNOLOGY •Maximum wiring efficiency and reliability •Designed for most stringent requirements •Supplied with open clamps ready to accept wires •Simple connection with standard flat head •No wire preparation necessary (with/ without ferrule) screwdriver •Vibration resistant/ Gas-tight connection •For very larger wire sizes (up to 250 kcmil) E220514 60947-7-1 MATERIAL SPECIFICATIONS Housing Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications Corrosion free material • Polyamide PA66 Housing Upper Temperature Limit: 105°C Screw Current Bar • Self-extinguishing Lower Temperature Limit: -50°C Terminal Clamp • Clamp: zinc chromate • High mechanical strength Flammability UL94: V2/ V0 passivated steel Volume Resistivity: 1012Ω cm • Screw: zinc chromate Surface Resistivity: 1010Ω passivated steel • Current Bar: nickel plated copper alloy / tin plated copper INSTALLATION GUIDELINES 1 2 Secure 3 Connection 1 Insert Wire into open clamp 2 Tighten screw to specified torque 3 Remove Screwdriver, screw terminal is closed with locking feature for a reliable/ safe connection SCREW CLAMP ACCESSORIES AND FEATURES Isolated Shorting Internal Screw Jumper Current Bar Internal Shorting Jumper Sleeve Separator Plate End Plate Isolation Partition DIN Rail External Jumper Marking Tags End Stop 4 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

OVERVIEW SELECTION GUIDE SCREW TERMINAL BLOCKS Feed Through Terminal Blocks • Up to 240A • Multi-Connection Terminals • Double Level Terminal • Triple Level Terminals • Ground Blocks Feed Through Multi-Connection Double Level Triple Level Ground / Earth • Wide range of accessories page 6-8 page 9 page 10-12 page 14-15 page 16-17 • All standard colors Fuse Terminal Blocks • 1/4" x 1" Fuse Terminal Blocks • 5x20mm/ 5x25mm Fuse Terminal Blocks • Double level versions 5x20mm / 5x25mm Double Lever 1/4”x1” Component Carrier Fuse Holder • Component Carrier for flexible requirements CF4U / CF4SP DDFL4U CAFL4U CCC4U • 10x38, CC, J-Type Fuse Holder page 18-19 page 20-21 page 22 page 23 page 24-25 Disconnect & Test Terminal Blocks • Slider Style • Blade/ Knife Style • Lever Style Slider Style Blade Style Blade Style Slider Style Lever Style • Accessories and matching Feed Through terminals CDS6U CKT4U CKT4SP CDTTU CSDL4U page 26-27 page 28 page 29 page 30 page 31 Power Distribution Terminal Blocks • Various I/O configurations • Up to 150A • Compact Hybrid Distribution Block CDB Series CMDB Series Hybrid CXDB Series Distribution/Grounding page 32-33 page 34 page 35 page 36 Special Application Terminal Blocks • Spring Loaded Terminals for high vibration applications • 1000V High Voltage Terminals • Thermocouple Terminals 1000V High Voltage Thermocouple Tab Connection Spring Loaded Electronic • Tab Connection Terminals CHV Series CTT2.5U Series CTC Series USC Series Components • Electronic Components Terminals page 37 page 38 page 39 page 36-37 page 42-47 Accessories • Internal Jumpers (Uninsulated, Insulated) • Endplates • Partition/ Separator Plates Jumpers Endplates, Separators, End Stops, Covers, etc. • Protective Covers page 48 page 49 • End Stops Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 5

FEED-THROUGH SINGLE LEVEL TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS2.5U-N CTS4U-N CTS6U HIGHLIGHTS FEATURES Dimensions & Weight • Altech CTS Series of Width 5 mm 6 mm 8 mm Universal Screw Terminal Length 43 mm 43 mm 43 mm Blocks featuring global standards Height w DIN Rail 35 x 7.5 mm 46.2 mm 46.2 mm 47.8 mm • 35 x 15 mm 53.7 mm 53.7 mm 55.5 mm Universal mounting foot for easy snap onto common Weight per piece 6.2 g 7.6 g 13.5 g DIN rail profiles • Technical Data/Ratings Screw-type jumper system • Approvals Current Ratings up to 240A AEx ell Ex ell U E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 APPLICATIONS Wire Size (solid / stranded) 22-12 AWG 0.2-2.5 mm2 22-10 AWG 0.2-4 mm2 22-8 AWG 0.5-6 mm2 • Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Ex & IECEx approvals for Current Rating 25 A 24 A 35 A 32 A 50 A 41 A use in potentially explosive areas Torque 7 lb-in 0.4 Nm 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm • Control, Automation Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 applications • Installation Instructions Power Distribution Wire Stripping Length 8 mm 8 mm 9 mm Screwdriver Flat Head 0.5 x 3.0 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CTS2.5U-N 100 CTS4U-N 100 CTS6U 100 Red R CTS2.5U-N/R 100 CTS4U-N/R 100 CTS6U/R 100 Blue BU CTS2.5U-N/BU 100 CTS4U-N/BU 100 CTS6U/BU 100 Black BL CTS2.5U-N/BL 100 CTS4U-N/BL 100 CTS6U/BL 100 Orange O CTS2.5U-N/O 100 CTS4U-N/O 100 CTS6U/O 100 Green G CTS2.5U-N/G 100 CTS4U-N/G 100 CTS6U/G 100 Yellow Y CTS2.5U-N/Y 100 CTS4U-N/Y 100 CTS6U/Y 100 White W CTS2.5U-N/W 100 CTS4U-N/W 100 CTS6U/W 100 Mounting Handle Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EP2.5/4UN 50 EP2.5/4UN 50 EP6/10U 50 Mounting handle is used for mounting 10 terminal Partition Plate PP2.5/4UN 50 PP2.5/4UN 50 PP6/10U 50 blocks on a DIN rail, thus saving considerable time. Separator Plate SP2.5/4UN 100 SP2.5/4UN 100 SP6/10U 100 Specially designed pins in the mounting handle grip DIN Rail 2511120 20 2511120 20 2511120 20 the terminal blocks when CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 pressed against entry. 2511160 10 2511160 10 2511160 10 Cat. No.Terminal Block Std. Pk. End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 MH2.5 CTS2.5U-N 1 CA202 25 CA202 25 CA202 25 MH4 CTS4U-N 1 Internal Jumper 2 pole CA721/2 100 CA722/2 100 CA723/2 100 3 pole CA721/3 100 CA722/3 100 CA723/3 50 4 pole CA721/4 100 CA722/4 50 CA723/4 50 10 pole CA721/10 10 CA722/10 10 CA723/10 10 100 pole CA721/100 10 CA722/100 10 – – Insulated 2 pole CA741/2 100 CA742/2 100 CA743/2 100 Internal Jumper 3 pole CA741/3 100 CA742/3 100 CA743/3 50 4 pole CA741/4 100 CA742/4 100 CA743/4 50 10 pole CA741/10 10 CA742/10 10 CA743/10 10 100 pole CA741/100 10 CA742/100 10 – – External Jumper 2 pole CA717/2 100 CA714/2 100 CA710/2 100 3 pole CA717/3 100 CA714/3 100 CA710/3 50 4 pole CA717/4 100 CA714/4 100 CA710/4 50 10 pole CA717/10 20 CA714/10 20 CA710/10 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/05 100 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) 6 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FEED-THROUGH SINGLE LEVEL TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS10U CTS16U CTS25UN CTS35UN Dimensions & Weight Width 10 mm 12 mm 12 mm 16 mm Length 43 mm 43 mm 49 mm 50.5 mm Height w DIN Rail 35 x 7.5 mm 47.8 mm 47.8 mm 57.2 mm 59.2 mm 35 x 15 mm 55.5 mm 55.5 mm 64.7 mm 66.7 mm Weight per piece 16.5 g 25.5 g 35.5 g 50.5 g Technical Data/Ratings Approvals AEx ell Ex ell U E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 16-6 AWG 22-6 AWG 0.5-10 mm2 20-4 AWG 22-6 AWG 0.2-16 mm2 14-2 AWG 4-25 mm2 12-1/0 AWG 4-35 mm2 Voltage Rating 600 V 600 V 1000V AC/DC 600 V 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 65 A 65 A 57 A 85 A 70 A 76 A 105 A 101 A 150 A 125 A Torque 14lb-in 14lb-in 1.2 Nm 14lb-in 14lb-in 1.2 Nm 30 lb-in 2.0 Nm 50 lb-in 2.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 11 mm 12 mm 14 mm 15 mm Screwdriver Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CTS10U 100 CTS16U 50 CTS25UN 50 CTS35UN 50 Red R CTS10U/R 100 CTS16U/R 50 CTS25UN/R 50 CTS35UN/R 50 Blue BU CTS10U/BU 100 CTS16U/BU 50 CTS25UN/BU 50 CTS35UN/BU 50 Black BL CTS10U/BL 100 CTS16U/BL 50 CTS25UN/BL 50 CTS35UN/BL 50 Orange O CTS10U/O 100 CTS16U/O 50 CTS25UN/O 50 CTS35UN/O 50 Green G CTS10U/G 100 CTS16U/G 50 CTS25UN/G 50 CTS35UN/G 50 Yellow Y CTS10U/Y 100 CTS16U/Y 50 CTS25UN/Y 50 CTS35UN/Y 50 White W CTS10U/W 100 CTS16U/W 50 CTS25UN/W 50 CTS35UN/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EP6/10U 50 – – – – – – Partition Plate PP6/10U 50 – – PP25UN 50 PP35UN 50 Separator Plate SP6/10U 100 SP6/10U 100 – – – – DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA724/2 100 CA751/2 50 CA725/2 50 CA771/2 50 3 pole CA724/3 50 CA751/3 50 CA725/3 20 CA771/3 20 4 pole CA724/4 50 CA751/4 50 CA725/4 20 CA771/4 20 10 pole CA724/10 10 CA751/10 10 CA725/10 10 CA771/10 10 100 pole – – CA751/100 10 CA725/100 10 – – Insulated 2 pole CA744/2 100 CA761/2 100 CA745/2 50 CA781/2 50 Internal Jumper 3 pole CA744/3 50 CA761/3 50 CA745/3 20 CA781/3 20 4 pole CA744/4 50 CA761/4 50 CA745/4 20 CA781/4 20 10 pole CA744/10 10 CA761/10 10 CA745/10 10 CA781/10 10 100 pole – – CA761/100 10 CA745/100 10 – – External Jumper 2 pole CA718/2 100 – – – – – – 3 pole CA718/3 50 – – – – – – 4 pole CA718/4 50 – – – – – – 10 pole CA718/10 20 – – – – – – Test Socket CA707/TS/05 100 CA707/TS/05 100 CA707/TS/06 100 CA707/TS/06 100 Marking Tag MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) MT12 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 7

FEED-THROUGH SINGLE LEVEL POWER TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS50/70N CTS50/70NA CTS95/120N HIGHLIGHTS FEATURES with with Allen Screw Allen Screw • Dimensions & Weight DIN Rail and Panel mountable Width 20.5 mm 20.5 mm 27.0 mm • •Voltage Rating 1000V Length 77.3 mm 77.3 mm 84.5 mm Current Rating up to 240A • Height w DIN Rail 35 x 7.5 mm 71.1 mm 71.1 mm 83.0 mm Hex Screw version for 35 x 15 mm 78.1 mm 78.1 mm 90.5 mm easier tightening (NA) • Auxiliary block for easy Weight per piece 93.8 g 95.0 g 177.2 g plug in Technical Data/Ratings Approvals APPLICATIONS • CSCBHEME Power Distribution E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 • Wire Size (solid / stranded) 8-2/0 AWG 10-70 mm2 8-2/0 AWG 10-70 mm2 2-250 KCMIL 25-120 mm2 Solar Applications •AUX6 Voltage Rating 1000 V 1000 V AC/DC 1000 V 1000 V AC/DC 1000 V 1000 V AC/DC auxiliary for indicator light or contactor Current Rating 175 A 192 A 175 A 192 A 240 A 269 A Torque 38 lb-in 3 .0 Nm 38 lb-in 3.0 Nm 90 lb-in 6.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 22 mm 22 mm 24 mm Screwdriver Flat Head 1.0x7.5 mm Allen Wrench5 mm Allen Wrench 6 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CTS50/70N 20 CTS50/70NA 20 CTS95/120N 10 Red R CTS50/70N/R 20 CTS50/70NA/R 20 CTS95/120N/R 10 Blue BU CTS50/70N/BU 20 CTS50/70NA/BU 20 CTS95/120N/BU 10 Black BL CTS50/70N/BL 20 CTS50/70NA/BL 20 CTS95/120N/BL 10 Orange O CTS50/70N/O 20 CTS50/70NA/O 20 CTS95/120N/O 10 Green G CTS50/70N/G 20 CTS50/70NA/G 20 CTS95/120N/G 10 Yellow Y CTS50/70N/Y 20 CTS50/70NA/Y 20 CTS95/120N/Y 10 White W CTS50/70N/W 20 CTS50/70NA/W 20 CTS95/120N/W 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Shorting Link System CA628/2 10 CA628/2 10 CA629/2 10 CA628/3 10 CA628/3 10 CA629/3 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Cat. No AUX6 Ratings Auxiliary Terminal Block IEC60947-7-1 UL-1059 Voltage/Current: 1000 V / 41 A Voltage/Current: 600 V / 50 A Used for: Torque: 0.8 Nm Torque: 14 lb-in CTS50/70N IEC 60079-7 CSA22.2-158 CTS50/70NA Voltage/Current: 630 V / 36 A Voltage/Current: 600 V / 50 A CTS95/120N Torque: 0.8 Nm Torque: 14 lb-in In certain power circuits, there is a need to take an extra con- nection for an Auxiliary circuit like an indicating light or con- Wire Range:22-8 AWG tactor. The AUX6 terminal Width x Length x Height:8 x 53.6 x 29.4 mm easily plugs into the terminal Std. Pk.:10 and provides this extra con- Marking Tag:MT8 nection point. 8 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FEED-THROUGH FEED THROUGH MULTI-CONNECTION SCREW TERMINAL BLOCKS CMC1-2 CMC2-2 CMCG4 HIGHLIGHTS FEATURES Dimensions & Weight • 3 to 4 connections • Width 6 mm 6 mm 6 mm Up to 2 connection Length 46.5 mm 65.0 mm 65.0 mm points on each side • Height w DIN Rail 35 x 7.5 mm 49.5 mm 53.4 mm 53.7 mm C2 MjuCm2p-e2r channels on 35 x 15 mm 56.5 mm 60.5 mm 60.9 mm for individual potential distribution Weight per piece 11.0 g 16.0 g 21.6 g •CMCG4 same profile Technical Data/Ratings as regular feed-through Approvals version E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 APPLICATIONS Voltage Rating 600 V 630 V AC/DC 600 V 630 V AC/DC 600 V 1000 V AC/DC • Connecting different Current Rating 35 A 32 A 35 A 32 A - - type of wires with differ- Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 4.5lb-in 0.5Nm ent wire sizes into a sin- Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 gle terminal block • Installation Instructions Simple distribution applications Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMC1-2 100 CMC2-2 50 CMCG4 50 Red R CMC1-2/R 100 CMC2-2/R 50 Yellow/Green Blue BU CMC1-2/BU 100 CMC2-2/BU 50 Black BL CMC1-2/BL 100 CMC2-2/BL 50 Orange O CMC1-2/O 100 CMC2-2/O 50 Green G CMC1-2/G 100 CMC2-2/G 50 Yellow Y CMC1-2/Y 100 CMC2-2/Y 50 White W CMC1-2/W 100 CMC2-2/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCMC1-2 50 EPCMC2-2 50 EPCMC2-2 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA722/2 100 CA722/2 100 – – 3 pole CA722/3 100 CA722/3 100 – – 4 pole CA722/4 50 CA722/4 50 – – 10 pole CA722/10 10 CA722/10 10 – – 100 pole CA722/100 10 CA722/100 10 – – Insulated 2 pole CA742/2 100 CA742/2 100 – – Internal Jumper 3 pole CA742/3 100 CA742/3 100 – – 4 pole CA742/4 100 CA742/4 100 – – 10 pole CA742/10 10 CA742/10 10 – – 100 pole CA742/100 10 CA742/100 10 – – External Jumper 2 pole CA713/2 100 CA713/2 100 – – 3 pole CA713/3 100 CA713/3 100 – – 4 pole CA713/4 100 CA713/4 100 – – 10 pole CA713/10 20 CA713/10 20 – – Test Socket CA707/TS/01 CA707/TS/01 – – Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 9

DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS CDL4UN CDL4UN(I.S) HIGHLIGHTS FEATURES • Accommodates larger MT6 Dimensions & Weight marking tags on both Width 6 mm 6 mm levels • Independent and internally Length 57.0 mm 57.0 mm •sChDoLrt4eUd Nversion Height w DIN Rail 35 x 7.5 mm 59.5 mm 59.5 mm offers jumper 35 x 15 mm 67.2 mm 67.2 mm •channel on both levels Weight per piece 13.8 g 15.6 g Same profile Ground Technical Data/Ratings versions • Approvals Grounding Level on CDLG4 is identified by E220514 60947-7-1 E220514 60947-7-1 green/yellow imprint Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating 35 A 32 A 35 A 32 A APPLICATIONS Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm • High density writing Insulation Material Polyamide 66 Polyamide 66 applications Installation Instructions Wire Stripping Length 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CDL4UN 100 CDL4UN(I.S) 100 Red R CDL4UN/R 100 CDL4UN(I.S)/R 100 Blue BU CDL4UN/BU 100 CDL4UN(I.S)/BU 100 Black BL CDL4UN/BL 100 CDL4UN(I.S)/BL 100 Orange O CDL4UN/O 100 CDL4UN(I.S)/O 100 Green G CDL4UN/G 100 CDL4UN(I.S)/G 100 Yellow Y CDL4UN/Y 100 CDL4UN(I.S)/Y 100 White W CDL4UN/W 100 CDL4UN(I.S)/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4UN 50 EPCDL4UN 50 Separator Plate SPCDL4U 100 SPCDL4U 100 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA202 25 CA202 25 Internal Jumper 2 pole CA722/2 100 CA722/2 100 3 pole CA722/3 100 CA722/3 100 4 pole CA722/4 100 CA722/4 100 10 pole CA722/10 10 CA722/10 10 100 pole CA722/100 10 CA722/100 10 Insulated 2 pole CA742/2 100 CA742/2 100 Internal Jumper 3 pole CA742/3 100 CA742/3 100 4 pole CA742/4 100 CA742/4 100 10 pole CA742/10 10 CA742/10 10 100 pole CA742/100 10 CA742/100 10 External Jumper 2 pole CA714/2 100 CA714/2 100 3 pole CA714/3 50 CA714/3 50 4 pole CA714/4 50 CA714/4 50 10 pole CA714/10 20 CA714/10 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) 10 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS CDLG4(I.S) CDLG4 CDLG2.5 Dimensions & Weight Width 6 mm 6 mm 6 mm Length 57.0 mm 57.0 mm 71.0 mm Height w DIN Rail 35 x 7.5 mm 59.5 mm 59.5 mm 53.0 mm 35 x 15 mm 67.2 mm 67.2 mm 61.0 mm Weight per piece 22.2 g 20.6 g 20.2 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 150 V 500 V AC/DC 150 V 500 V AC/DC 300 V 500 V Current Rating - - 32 A (upper level) 32 A 24 A 24 A Torque 4.5 lb-in 0.5Nm 4.5lb-in 0.5Nm 4.5 lb-in 0.4 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.5 x 3.0 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green CDLG4(I.S) 100 CDLG4 100 CDLG2.5 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4UN 50 EPCDL4UN 50 EPCDLG2.5 50 Separator Plate SPCDL4U 100 SPCDL4U 100 SPCDLG2.5 100 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA722/2 100 CA722/2 100 CA627/2 100 3 pole CA722/3 100 CA722/3 100 CA627/3 100 4 pole CA722/4 50 CA722/4 50 CA627/4 100 10 pole CA722/10 10 CA722/10 10 CA627/10 10 100 pole CA722/100 10 CA722/100 10 – – Insulated 2 pole CA742/2 100 CA742/2 100 – – Internal Jumper 3 pole CA742/3 100 CA742/3 100 – – 4 pole CA742/4 100 CA742/4 100 – – 10 pole CA742/10 10 CA742/10 10 – – 100 pole CA742/100 10 CA742/100 10 – – External Jumper 2 pole CA714/2 100 CA714/2 100 CA715/2 100 3 pole CA714/3 50 CA714/3 50 CA715/3 100 4 pole CA714/4 50 CA714/4 50 CA715/4 100 10 pole CA714/10 20 CA714/10 20 CA715/10 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT2G 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 11

DOUBLE LEVEL FEED THROUGH OFFSET DOUBLE LEVEL SCREW TERMINAL BLOCKS ODL4U HIGHLIGHTS FEATURES • Dimensions & Weight Top Level is offset by half terminal width from lower Width 6 mm level • Length 68 mm Offset allows better ac- cess to both levels even Height w DIN Rail 35 x 7.5 mm 65.0 mm ODL4U when fully wired 35 x 15 mm 71.1 mm (without End Plates) • Different Endplates for Weight per piece 14.5 g front and back side guar- Technical Data/Ratings antee flush mounting to neighboring terminal Approvals blocks or end stops EPODL4U ( and E220514 60947-7-1 EP1ODL4U Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 ) Voltage Rating 600 V 800 VAC/DC Current Rating 35 A 32 A APPLICATIONS Torque 7 lb-in 0.5 Nm • High density writing Insulation Material Polyamide 66 applications Installation Instructions Wire Stripping Length 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Grey (standard) ODL4U 100 Red R ODL4U/R 100 ODL4U Blue BU ODL4U/BU 100 (with End Plates) Black BL ODL4U/BL 100 Orange O ODL4U/O 100 End Plate (Front) Green G ODL4U/G 100 EPODL4U Yellow Y ODL4U/Y 100 White W ODL4U/W 100 End Plate (Back) EP1ODL4U Accessories Cat. No. Std. Pk. End Plate EPODL4U (Front) 50 EP1ODL4U (Back) 50 Separator Plate SPCDL4U 100 DIN Rail 2511120 20 CA701-15/S 20 2511160 10 End Stop CA702 50 CA802 50 CA202 25 Internal Jumper 2 pole CA727/2 100 3 pole CA727/3 100 4 pole CA727/4 100 10 pole CA727/10 10 100 pole CA727/100 10 Insulated 2 pole CA747/2 100 Internal Jumper 3 pole CA747/3 100 4 pole CA747/4 100 10 pole CA747/10 10 100 pole CA747/100 10 External Jumper 2 pole CA714/2 100 3 pole CA714/3 100 4 pole CA714/4 100 10 pole CA714/10 20 Test Socket CA707/TS/01 Marking Tag MT6 1 Pk. (100 tags) 12 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DOUBLE LEVEL FEED THROUGH DOUBLE LEVEL SCREW TERMINAL BLOCKS ODL2.5 ODL2.5(I.S) ODLG2.5 ODLG2.5(I.S) Double Level Double Level with Offset Internally Double Level with Offset Double Level with Offset Internally Dimensions & Weight with Offset Shorted Upper / Lower Level Ground Connection Shorted / Ground Connection Width 5 mm 5 mm 5 mm 5 mm Length 62.0 mm 62.0 mm 62.0 mm 62.0 mm Height w DIN Rail 35 x 7.5 mm 63.0 mm 63.0 mm 63.0 mm 63.0 mm 35 x 15 mm 70.5 mm 70.5 mm 70.5 mm 70.5 mm Weight per piece 13.0 g 14.2 g 15.3 g 17.0 g Technical Data/Ratings Approvals UL UL UL UL 60947-7-1 60947-7-1 60947-7-1 60947-7-1 Wire Size (solid / stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 800 V AC/DC 300 V 800 V AC/DC 300 V 800 V AC/DC 300 V 800 V AC/DC Current Rating 25 A 24 A 25 A 24 A 25 A 24 A 24 A 24 A Torque 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey ODL2.5 50 ODL2.5(I.S) 50 ODLG2.5 50 ODLG2.5(I.S) 50 Stackable Clip-on ODL2.5A 50 ODL2.5A(I.S) 50 ODLG2.5A 50 ODLG2.5A(I.S) 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate Front Side EPODL2.5 50 EPODL2.5 50 EPODL2.5 50 EPODL2.5 50 Back Side EP1ODL2.5 50 EP1ODL2.5 50 EP1ODL2.5 50 EP1ODL2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 CA202 25 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 5 pole JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 6 pole JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 7 pole JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 8 pole JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 Marking Tag MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 13

TRIPLE LEVEL FEED THROUGH TRIPLE LEVEL SCREW TERMINAL BLOCKS CTL2.5U CTL2.5U-H CTL2.5U(I.S) HIGHLIGHTS FEATURES • 3 Feed through levels • Marking Tag space on all 3 levels Dimensions & Weight • Independent Levels and Width 6 mm 6 mm 6 mm internally shorted version CTL2.5U(I.S) Length 84.0 mm 61.0 mm 84.0 mm • Height w DIN Rail 35 x 7.5 mm 68.0 mm 68.0 mm 68.0 mm LED versions to show 35 x 15 mm 75.6 mm 75.6 mm 75.6 mm switching indication in various voltages - Weight per piece 20.0 g 21.0 g 21.0 g CTL2.5U(L)/XX Technical Data/Ratings • 3 Level terminal with Approvals additional grounding level CTLG2.5 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 500 V AC/DC 300 V 500 V AC/DC 150 V 500 V AC/DC APPLICATIONS Current Rating 25 A 24 A 25 A 24 A 25 A 24 A • Control Systems with Torque 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm sensor applications • Actuator applications Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 • •Motor applications Installation Instructions Applications with high Wire Stripping Length 9 mm 9 mm 9 mm wire density Screwdriver Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CTL2.5U 50 CTL2.5U-H 50 CTL2.5U(I.S) 50 Red R CTL2.5U/R 50 CTL2.5U-H/R 50 CTL2.5U(I.S)/R 50 Blue BU CTL2.5U/BU 50 CTL2.5U-H/BU 50 CTL2.5U(I.S)/BU 50 Black BL CTL2.5U/BL 50 CTL2.5U-H/BL 50 CTL2.5U(I.S)/BL 50 Orange O CTL2.5U/O 50 CTL2.5U-H/O 50 CTL2.5U(I.S)/O 50 Green G CTL2.5U/G 50 CTL2.5U-H/G 50 CTL2.5U(I.S)/G 50 Yellow Y CTL2.5U/Y 50 CTL2.5U-H/Y 50 CTL2.5U(I.S)/Y 50 White W CTL2.5U/W 50 CTL2.5U-H/W 50 CTL2.5U(I.S)/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCTL2.5U 50 EPCTL2.5U-H 50 EPCTL2.5U 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA722/2 100 CA722/2 100 CA722/2 100 3 pole CA722/3 100 CA722/3 100 CA722/3 100 4 pole CA722/4 100 CA722/4 100 CA722/4 100 10 pole CA722/10 10 CA722/10 10 CA722/10 10 100 pole CA722/100 10 CA722/100 10 CA722/100 10 External Jumper 2 pole CA715/2 100 CA715/2 100 CA715/2 100 3 pole CA715/3 100 CA715/3 100 CA715/3 100 4 pole CA715/4 100 CA715/4 100 CA715/4 100 10 pole CA715/10 20 CA715/10 20 CA715/10 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) 14 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

TRIPLE LEVEL FEED THROUGH TRIPLE LEVEL SCREW TERMINAL BLOCKS CTL2.5U-H(L)/XX CTL2.5U(L)/XX CTL2.5UH(I.S)D2 CTLG2.5 Dimensions & Weight Width 6 mm 6 mm 6 mm 6 mm Length 61.0 mm 84.0 mm 61.0 mm 87.5 mm Height w DIN Rail 35 x 7.5 mm 68.0 mm 68.0 mm 68.0 mm 66.0 mm 35 x 15 mm 75.6 mm 75.6 mm 75.6 mm 74.0 mm Weight per piece 21.0 g 21.0 g 15.1 g 27.4 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 300 V 500 V AC/DC 300 V 500 V AC/DC 150 V 500 V AC/DC 300 V 440 V Current Rating 25 A 24 A 25 A 24 A 25 A 24 A 24 A 24 A Torque 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm 9 mm Screwdriver Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CTL2.5UH(I.S)D2 50 CTLG2.5 100 LED Voltage 12 V CTL2.5U-H(L)/12 50 CTL2.5U(L)/12 50 Yellow/Green LED Voltage 24 V CTL2.5U-H(L)/24 50 CTL2.5U(L)/24 50 LED Voltage 48 V CTL2.5U-H(L)/48 50 CTL2.5U(L)/48 50 LED Voltage 110 V CTL2.5U-H(L)/110 50 CTL2.5U(L)/110 50 LED Voltage 220 V CTL2.5U-H(L)/220 50 CTL2.5U(L)/220 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCTL2.5U-H 50 EPCTL2.5U 50 EPCTL2.5U-H 50 EPCTLG2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA722/2 100 CA722/2 100 CA722/2 100 CA627/2 100 3 pole CA722/3 100 CA722/3 100 CA722/3 100 CA627/3 100 4 pole CA722/4 100 CA722/4 100 CA722/4 100 CA627/4 100 10 pole CA722/10 10 CA722/10 10 CA722/10 10 CA627/10 10 100 pole CA722/100 10 CA722/100 10 CA722/100 10 – – External Jumper 2 pole CA715/2 100 CA715/2 100 CA715/2 100 CA715/2 100 3 pole CA715/3 100 CA715/3 100 CA715/3 100 CA715/3 100 4 pole CA715/4 100 CA715/4 100 CA715/4 100 CA715/4 100 10 pole CA715/10 20 CA715/10 20 CA715/10 20 CA715/10 20 Test Socket CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 CA707/TS/01 100 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2G 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 15

GROUND GROUND/EARTH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CGT4U CGT4N CGT6N HIGHLIGHTS FEATURES • Yellow/Green color code Dimensions & Weight as per industry standard • Width 6 mm 6 mm 8 mm Clamp mechanically on Rail by tightening middle Length 43 mm 54.2 mm 54.5 mm •screw Height w DIN Rail 35 x 7.5 mm 49.5 mm 47.0 mm 48.2 mm Rail serves as grounding 35 x 15 mm 56.7 mm 54.4 mm 55.8 mm busbar to feed ground Weight per piece 21.5 g 22.0 g 27.0 g potential to all other grounding terminals Technical Data/Ratings •CGT4N CGT6N , , Approvals CGT10N CGT16N and EAxE exl el Ull have same profile as re- E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 spective feed through blocks Voltage Rating 600 V 800 V AC/DC 600 V 1000 V AC/DC 600 V 1000 V AC/DC •CGT4U CGT10U , , and Current Rating – – – CGT35U mount on both Torque 7.0 lb-in 0.5 Nm 7 lb-in 0.5 Nm 14 lb-in 1.6 Nm 35mm and 32mm DIN-Rail Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 APPLICATIONS Installation Instructions • Wire Stripping Length 8 mm 8 mm 9 mm Grounding Applications Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green CGT4U 50 CGT4N 50 CGT6N 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCGT4U/Y 50 – – – – DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) Assembly example for single phase 3 wire circuits. 16 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

GROUND GROUND/EARTH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CGT10U CGT10N CGT16N CGT35U Dimensions & Weight Width 10 mm 10 mm 12 mm 16 mm Length 45.0 mm 55.0 mm 55.0 mm 58.0 mm Height w DIN Rail 35 x 7.5 mm 51.0 mm 48.5 mm 48.5 mm 63.7 mm 35 x 15 mm 58.2 mm 56.0 mm 56.0 mm 70.5 mm Weight per piece 30.5 g 35.2 g 39.6 g 102.0 g Technical Data/Ratings Approvals AEx ell Ex ell U IEC E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 Wire Size (solid / stranded) 16-8 AWG 22-6 AWG 0.2-10 mm2 16-6 AWG 0.2-10 mm2 20-4 AWG 0.2-16 mm2 8-2 AWG 2.5-35 mm2 Voltage Rating 600 V 600 V 1000 V AC/DC 600 V 1000 V AC/DC 600 V 1000 V AC/DC 600 V 1000 V AC/DC Current Rating – – – – Torque 14lb-in 14lb-in 1.6Nm 14 lb-in 1.6 Nm 14 lb-in 1.6 Nm 25 lb-in 2.8 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 11 mm 11 mm 12 mm 15 mm Screwdriver Flat Head 0.8 x 4.0 mm Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green CGT10U 50 CGT10N 50 CGT16N 50 CGT35U 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate – – – – – – – – DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 Marking Tag MT10 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 17

FUSE BLOCKS FUSE BLOCKS, 5 x 20 and 5 x 25 mm SCREW TERMINAL BLOCKS CF4U CF4U(L)/6-60V CF4U(L)/110-240V HIGHLIGHTS FEATURES •CF4U Series accepts 27KΩ 220KΩ 5x20mm/ 5x25mm fuse Dimensions & Weight types • Completely enclosed, no Width 8 mm 8 mm 8 mm •eCnFd4pUla(Lte)s Length 57.0 mm 57.0 mm 57.0 mm version with LED Height w DIN Rail 35 x 7.5 mm 50.3 mm 50.3 mm 50.3 mm for blown fuse indication • 35 x 15 mm 57.6 mm 57.6 mm 57.6 mm Large marking area • Weight per piece 14.8 g 15.4 g 15.4 g No polarity required • Technical Data/Ratings Blocks can be used for AC Approvals & DC Voltages APPLICATIONS Wire Size (solid / stranded) E222025-1140 AWG 0.620-944 7m-7m-32 E222025-1140 AWG 0.620-944 7m-7m-32 E222025-1140 AWG 0.620-944 7m-7m-32 • Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC Control systems with fuse protection Current Rating 10 A 6.3 A 10 A 6.3 A 10 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm LED Indicator Voltage - 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length 9.5 mm 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CF4U 50 CF4U(L)/6-60V 50 CF4U(L)/110-240V 50 Blue BU CF4U/BU 50 CF4U(L)/6-60V/BU 50 CF4U(L)/110-240V/BU50 Black BL CF4U/BL 50 CF4U(L)/6-60V/BL 50 CF4U(L)/110-240V/BL 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 External Jumper 2 pole CA711/2 100 CA711/2 100 CA711/2 100 3 pole CA711/3 50 CA711/3 50 CA711/3 50 4 pole CA711/4 50 CA711/4 50 CA711/4 50 10 pole CA711/10 20 CA711/10 20 CA711/10 20 Marking Tag On Terminal MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) On Fuse Carrier MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Fuses Current Slow Blow Fast Blow 5 x 20 mm Rating Cat. No Cat. No Ø5mm 0.1A 0.1M5x20T 0.1M5x20F (0.2 in.) 0.2A 0.2M5x20T 0.2M5x20F 0.5A 0.5M5x20T 0.5M5x20F 1.0A 1.0M5x20T 1.0M5x20F 2.0A 2.0M5x20T 2.0M5x20F mm9 in.) 4.0A 4.0M5x20T 4.0M5x20F 200.7 ( 5.0A 5.0M5x20T 5.0M5x20F 6.3A 6.3M5x20T 6.3M5x20F 8.0A 8.0M5x20T 8.0M5x20F 10.0A 10.0M5x20T 10.0M5x20F 18 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FUSE BLOCKS FUSE BLOCKS, 5 x 20 and 5 x 25 mm SCREW TERMINAL BLOCKS CF4SP CF4SP(L)/6-60V CF4SP(L)/110-240V HIGHLIGHTS FEATURES •CF4SP Series accepts 27KΩ 220KΩ 5x20mm fuse types • Dimensions & Weight •6mm wide, compact design Internal shorting channel Width 6 mm 6 mm 6 mm • Completely enclosed, no Length 58.5 mm 58.5 mm 58.5 mm endplates •CF4SP(L) version with LED Height w DIN Rail 35 x 7.5 mm 70.0 mm 70.0 mm 70.0 mm 35 x 15 mm 77.5 mm 77.5 mm 77.5 mm •for blown fuse indication No polarity required Weight per piece 16.9 g 17.4 g 17.4 g Technical Data/Ratings APPLICATIONS Approvals • Control systems with fuse E220514 60947-7-3 E220514 60947-7-3 E220514 60947-7-3 •protection Wire Size (solid / stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Control Circuits with Voltage Rating 600 V 1000 V AC/DC 600 V 1000 V AC/DC 600 V 1000 V AC/DC alternating configuration CF4SPFT with ( , Current Rating 10 A 10 A 10 A 10 A 10 A 10 A CKT4SP , etc...) Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm LED Indicator Voltage - 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length 8 mm 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CF4SP 50 CF4SP(L)/6-60V 50 CF4SP(L)/110-240V 50 CF4SPFT Blue BU CF4SP/BU 50 CF4SP(L)/6-60V/BU 50 CF4SP(L)/110-240V/BU50 Black BL CF4SP/BL 50 CF4SP(L)/6-60V/BL 50 CF4SP(L)/110-240V/BL50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 Internal Jumper 2 pole CA722/2 100 CA722/2 100 CA722/2 100 3 pole CA722/3 100 CA722/3 100 CA722/3 100 Feed Through Terminal 4 pole CA722/4 100 CA722/4 100 CA722/4 100 Same Profile as CF4SP 10 pole CA722/10 10 CA722/10 10 CA722/10 10 Technical Data/Ratings 100 pole CA722/100 10 CA722/100 10 CA722/100 10 Insulated 2 pole CA742/2 100 CA742/2 100 CA742/2 100 Internal Jumper 3 pole CA742/3 100 CA742/3 100 CA742/3 100 4 pole CA742/4 100 CA742/4 100 CA742/4 100 E220514 60947-7-1 24-10 AWG 0.2-4 mm2 10 pole CA742/10 10 CA742/10 10 CA742/10 10 100 pole CA742/100 10 CA742/100 10 CA742/100 10 600 V 1000 V External Jumper 2 pole CA714/2 100 CA714/2 100 CA714/2 100 30 A 32 A 3 pole CA714/3 100 CA714/3 100 CA714/3 100 4.5 lb-in 0.5 Nm 4 pole CA714/4 100 CA714/4 100 CA714/4 100 10 pole CA714/10 20 CA714/10 20 CA714/10 20 Polyamide 66 Marking Tag On Terminal MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) On Fuse Carrier MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 19

FUSE BLOCKS DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm SCREW TERMINAL BLOCKS DDFL4U DDFL4U(E)/XX HIGHLIGHTS FEATURES • Dimensions & Weight Top Level fuse link for Width 8 mm 8 mm 5x20mm/ 5x25mm fuse types Length 88 mm 88 mm • Bottom Level Feed Height w DIN Rail 35 x 7.5 mm 67.4 mm 67.4 mm through terminal 35 x 15 mm 74.3 mm 74.3 mm •DDFL4U(E) version with Weight per piece 28.0 g 27.0 g LED for blown fuse Technical Data/Ratings indication in various voltages Approvals • Blocks can be used in AC & DC applications E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC APPLICATIONS Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A • Current Rating (bottom) 35 A 32 A 35 A 32 A Tight space fuse applications Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm • No need for additional Insulation Material Polyamide 66 Polyamide 66 Feed through terminal Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm LED Indicator Voltage - 24V, 48V, 110V, 220V, 440V Installation Instructions Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey DDFL4U 20 LED Voltage 24V AC/DC DDFL4U(E)/24 20 LED Voltage 48V AC/DC DDFL4U(E)/48 20 LED Voltage 110V AC/DC DDFL4U(E)/110 20 LED Voltage 220V AC/DC DDFL4U(E)/220 20 LED Voltage 440V AC DDFL4U(E)/440 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPDDFL4U 50 EPDDFL4U 50 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA202 25 CA202 25 Internal Jumper 2 pole CA729/2 100 CA729/2 100 3 pole CA729/3 50 CA729/3 50 4 pole CA729/4 50 CA729/4 50 10 pole CA729/10 10 CA729/10 10 Insulated 2 pole CA749/2 100 CA749/2 100 Internal Jumper 3 pole CA749/3 50 CA749/3 50 4 pole CA749/4 50 CA749/4 50 10 pole CA749/10 10 CA749/10 10 External Jumper 2 pole CA711/2 100 CA711/2 100 3 pole CA711/3 50 CA711/3 50 4 pole CA711/4 50 CA711/4 50 10 pole CA711/10 20 CA711/10 20 Marking Tag on terminal MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) on lever MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) 20 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FUSE BLOCKS DOUBLE LEVEL FUSE BLOCKS, 5 x 20 / 5 x 25 mm SCREW TERMINAL BLOCKS WITH 2 CONNECTION POINTS DDFL4ULR DDFL4U(E)LR/XX HIGHLIGHTS FEATURES • Modified version of Dimensions & Weight DDFL4U with 2 Width 8 mm 8 mm equipotential •DDFL4U(E) Length 88 mm 88 mm version with LED for blown fuse indica- Height w DIN Rail 35 x 7.5 mm 67.4 mm 67.4 mm tion in various voltages 35 x 15 mm 74.3 mm 74.3 mm • Blocks can be used in AC & Weight per piece 24.5 g 27.0 g DC applications Technical Data/Ratings Approvals APPLICATIONS • E220514 60947-7-1 E220514 60947-7-1 Control Circuits with multi Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 wire fuse application Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm / 5 x 25 mm 5x20 mm / 5 x 25 mm LED Indicator Voltage - 24V, 48V, 110V, 220V, 440V Installation Instructions Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey DDFL4ULR 20 LED Voltage 24V AC/DC DDFL4U(E)LR/24 20 LED Voltage 48V AC/DC DDFL4U(E)LR/48 20 LED Voltage 110V AC/DC DDFL4U(E)LR/110 20 LED Voltage 220V AC/DC DDFL4U(E)LR/ 220 20 LED Voltage 440V AC DDFL4U(E)LR/440 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPDDFL4U 50 EPDDFL4U 50 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA202 25 CA202 25 Internal Jumper 2 pole CA729/2 100 CA729/2 100 3 pole CA729/3 50 CA729/3 50 4 pole CA729/4 50 CA729/4 50 10 pole CA729/10 10 CA729/10 10 Insulated 2 pole CA749/2 100 CA749/2 100 Internal Jumper 3 pole CA749/3 50 CA749/3 50 4 pole CA749/4 50 CA749/4 50 10 pole CA749/10 10 CA749/10 10 External Jumper 2 pole CA711/2 100 CA711/2 100 3 pole CA711/3 50 CA711/3 50 4 pole CA711/4 50 CA711/4 50 10 pole CA711/10 20 CA711/10 20 Marking Tag on terminal MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) on lever MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 21

FUSE BLOCKS SCREW TERMINAL BLOCKS FUSE BLOCKS, 1/4 x 1 and 1/4 x 11/4 in. CAFL4U CAFL4U(L)/XX CAFL4U(N) HIGHLIGHTS FEATURES •CAFL4U Series accepts 1/4” x 1-1/4” (6.3x32mm) Dimensions & Weight fuse types •CAFL4U(L) Width 9 mm 9 mm 9 mm versions with LED for blown fuse Length 72 mm 72 mm 72 mm indication (24V, 48V, 110V, Height w DIN Rail 35 x 7.5 mm 55.3 mm 55.3 mm 55.3 mm •2C2A0FVL)4U(N) 35 x 15 mm 63.0 mm 63.0 mm 63.0 mm version with Weight per piece 20.5 g 20.5 g 20.5 g Neon bulb for blown fuse Technical Data/Ratings indication • Large marking area Approvals • Blocks can be used in AC & DC applications E220514 60947-7-3 E220514 60947-7-3 E220514 60947-7-3 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000 V 600 V 1000 V 600 V 1000 V APPLICATIONS • Current Rating 16 A 6.3 A 16 A 6.3 A 16 A 6.3 A Control systems with Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7lb-in 0.5Nm 1/4” x 1-1/4” fuse protection Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 9.5 mm 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Fuse Specifications Fuse Type 1/4” x 1” (6.3 x 32 mm) 1/4” x 1” (6.3 x 32 mm) 1/4” x 1” (6.3 x 32 mm) LED/Neon Indicator Voltage - 24V, 48V, 110V, 220V 110V - 240V Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CAFL4U 25 – – Blue BU CAFL4U/BU 25 – – Black BL CAFL4U/BL 25 – LED Voltage 24V AC/DC – CAFL4U(L)/24 25 – LED Voltage 48V AC/DC – CAFL4U(L)/48 25 – LED Voltage 110V AC/DC – CAFL4U(L)/110 25 – LED Voltage 220V AC/DC – CAFL4U(L)/220 25 – Neon Bulb 110-300V AC/DC – – CAFL4U(N) 25 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 External Jumper 2 pole CA716/2 50 CA716/2 50 CA716/2 50 3 pole CA716/3 50 CA716/3 50 CA716/3 50 4 pole CA716/4 50 CA716/4 50 CA716/4 50 10 pole CA716/10 20 CA716/10 20 CA716/10 20 Marking Tag MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) Fuses Ø6.3mm Current Slow Blow Fast Blow Current Slow Blow Fast Blow (0.25 in.) 1/4” x 1-1/4” Rating Cat. No Cat. No Rating Cat. No Cat. No (6.3 x 32mm) 0.1A 0.1M6.3x32T 0.1M6x32F 4.0A 4.0M6.3x32T 4.0M6x32F 00..25AA 00..25MM66..33xx3322TT 00..25MM66xx3322FF 56..03AA 56..03MM66..33xx3322TT 56..03MM66xx3322FF 32mm(1.25 in.) 1.0A 1.0M6.3x32T 1.0M6x32F 8.0A 8.0M6.3x32T 8.0M6x32F 2.0A 2.0M6.3x32T 2.0M6x32F 10.0A 10.0M6.3x32T 10.0M6x32F 22 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FUSE BLOCKS COMPONENT CARRIER TERMINAL BLOCKS SCREW TERMINAL BLOCKS CCC4U CPF CPFL6-60V CPFL110-240V 27KΩ 27KΩ Dimensions Width 6 mm 6 mm 6 mm 6 mm Length 58.5 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm 46 mm 35 mm 35 mm 35 mm 35 x 15 mm 53.5 mm Weight per piece 10.2 g 3.8 g 3.8 g 4.2 g Technical Data/Ratings Approvals 60947-7-1 E220514 60947-7-1 E220514 60947-7-3 E220514 60947-7-3 Wire Size (solid | stranded) 0.2-6 mm2| 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 1000 V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating * 1 A 1 A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Carrier Specifications Component Type Component carrier base Plug module with diode Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse Diode Type IN4007 with LED indicator LED Indicator Voltage – – – 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length 8 mm 10 mm 10 mm 10 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CCC4U 50 CPF 50 CPFL6-60V 50 CPFL110-240V 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 – – – – – – CA701-15/S 10 – – – – – – End Stop CA702 50 – – – – – – CA802 50 – – – – – – CA103 50 – – – – – – Internal 2 pole CA722/2 100 – – – – – – Jumpers 3 pole CA722/3 100 – – – – – – 4 pole CA722/4 100 – – – – – – 10 pole CA722/10 10 – – – – – – 100 pole CA722/100 10 – – – – – – Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) * Current Rating is based on plug used. Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 23

FUSE HOLDERS FUSE HOLDERS, 10 x 38 mm and CC Type 10x38 Midget Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. PCF 10 & PCF 10 LED 1-pole 002550001 002550011 10x38 690V AC / 32A 600V AC/DC / 30A 1 1-pole+N 002550002 002550012 10x38 690V AC / 32A 600V AC/DC / 30A 1 2-pole 002550003 002550013 10x38 690V AC / 32A 600V AC/DC / 30A 1 3-pole 002550004 002550014 10x38 690V AC / 32A 600V AC/DC / 30A 1 3-pole+N 002550005 002550015 10x38 690V AC / 32A 600V AC/DC / 30A 1 EFD 10 & EFD 10 LED 1-pole 002540001 002540011 10x38 690V AC/DC / 32A 600V AC/DC / 30A 2 1-pole+N 002540002 002540012 10x38 690V AC/DC / 32A 600V AC/DC / 30A 2 2-pole 002540003 002540013 10x38 690V AC/DC / 32A 600V AC/DC / 30A 2 3-pole 002540004 002540014 10x38 690V AC/DC / 32A 600V AC/DC / 30A 2 E212627 3-pole+N 002540005 002540015 10x38 690V AC/DC / 32A 600V AC/DC / 30A 2 CC Type and J Type Fuse Holders Pole Without With LED Fuse UL Rating Drawing Configuration Indication Indication Size SCR Voltage/Amp. No. PCF CC & PCF CC LED 1-pole 002550101 002550111 CC Type 200 kA 600V AC/DC / 30A 1 2-pole 002550103 002550113 CC Type 200 kA 600V AC/DC / 30A 1 3-pole 002550104 002550114 CC Type 200 kA 600V AC/DC / 30A 1 EFD CC & EFD CC LED 1-pole 002540101 002540111 CC Type 200 kA 600V AC / 30A 2 2-pole 002540103 002540113 CC Type 200 kA 600V AC / 30A 2 3-pole 002540104 002540114 CC Type 200 kA 600V AC / 30A 2 EFD J30 DC & EFD J30 10 DC LED 1-pole 002570101 002570111 J-TYPE 200 kA 600V AC/DC / 30A 3 2-pole 002570103 002570113 J-TYPE 200 kA 600V AC/DC / 30A 3 E212627 3-pole 002570104 002570114 J-TYPE 200 kA 600V AC/DC / 30A 3 PV Type Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. PCF 10 DC & PCF 10 DC LED 1-pole 002550201 002550211 10x38 1000V DC / 25A 1000V DC / 25A 1 2-pole 002550203 002550213 10x38 1000V DC / 25A 1000V DC / 25A 1 EFH 10 DC & EFH 10 DC LED 1-pole 002540201 002540211 10x38 1000V DC / 25A 1000V DC / 25A 2 2-pole 002540203 002540213 10x38 1000V DC / 25A 1000V DC / 25A 2 EFH 14 DC & EFH 14 DC LED 1-pole 002560201 002560211 14x51 1000V DC / 50A 1000V DC / 50A 3 2-pole 002560203 002560213 14x51 1000V DC / 50A 1000V DC / 50A 3 E356295 E356295 IEC Type Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. EFD 14 & EFD 14 LED 1-pole 002560001 002560011 14x51 690V AC / 50A 600V AC/DC / 50A 3 1-pole+N 002560002 002560012 14x51 690V AC / 50A 600V AC/DC / 50A 3 2-pole 002560003 002560013 14x51 690V AC / 50A 600V AC/DC / 50A 3 3-pole 002560004 002560014 14x51 690V AC / 50A 600V AC/DC / 50A 3 3-pole+N 002560005 002560015 14x51 690V AC / 50A 600V AC/DC / 50A 3 EFD 22 & EFD 22 LED 1-pole 002570001 002570011 22x58 690V AC / 100A 600V AC/DC / 100A 4 1-pole+N 002570002 002570012 22x58 690V AC / 100A 600V AC/DC / 100A 4 2-pole 002570003 002570013 22x58 690V AC / 100A 600V AC/DC / 100A 4 3-pole 002570004 002570014 22x58 690V AC / 100A 600V AC/DC / 100A 4 3-pole+N 002570005 002570015 22x58 690V AC / 100A 600V AC/DC / 100A 4 E212627 24 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FUSE HOLDERS FUSE HOLDERS, 10 x 38 mm and CC Type 1 2 64 43.8 17.8 75 59.5 4 17.5 45.1 64.4 83.3 45 81 37 6.8 47.3 PCF Type EFD10 and EFH10 Type 3 4 83 93 69 69 43.5 27 43.5 6.8 35.6 6.8 5 4 5 8 4 4 9094 116. 120. 56.8 56.8 EFD 14 Type EFD 22 Type NOTE: All dimensions are shown in millimeters. To convert to inches multiply by 0.03937 Accessories for The Modular Type PCF, EFD and EFH Auxiliary Switches Modular fuse holders have a unique user configurable feature. By using the modular snap kit (parts sold individually) a customer can configure any pole configuration by inserting the connecting element (3 per Model No. Usable with Type pole) into the slot in the side of the fuse holder and then 002559001 PCF 10 1NO/1NC pushing them together and inserting the connecting 002569001 EFD 14 1NO/1NC shaft into the handle. 002579001 EFD 22 1NO/1NC NOTE: 1 kit suffices for the assembly of 50 sets. For Auxiliary switches to operate, a fuse with striker pin must be used. 2 Pole Connection Kits 3 Pole Connection Kits Model No. Usable with Model No. Usable with 002540948 EFD 8, EFD 10, EFH 10, PCF 8, 002540949 EFD 8, EFD 10, PCF 8, PCF 10, PCF 10, EFD CC, PCF CC EFD CC, PCF CC 002560948 EFD 14, EFH 14 002560949 EFD 14 002570948 EFD 22, EFD J30 002570949 EFD 22, EFD J30 E Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 25

DISCONNECT & TEST DISCONNECT AND TEST TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDS6U CDS6U/TS CDS6U/FT HIGHLIGHTS FEATURES • Slider Style Disconnect Terminals •CDS6U Slider Disconnect Terminal Slider Disconnect Terminal Feed Through Terminal - Standard Slider Dimensions & Weight Including Test Sockets with CDS6U profile Disconnect •CDS6U/TS - Slider Width 8 mm 8 mm 6 mm Disconnect with integrated Length 82 mm 82 mm 82 mm testing points •CDS6U/FT Height w DIN Rail 35 x 7.5 mm 51.0 mm 51.0 mm 51.0 mm - Same profile 35 x 15 mm 59.2 mm 59.2 mm 59.2 mm Feed-Through • Weight per piece 33.8 g 33.8 g 21.2 g Separate Testing points allow insertion of standard Technical Data/Ratings • test probes Approvals Disconnect is achieved b CSCBHEME operating sliding link wit E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-8 AWG 0.2-6 mm2 22-8 AWG 0.2-6 mm2 22-8 AWG 0.2-6 mm2 screw driver •SLS2 SLS4 , slide shorting Voltage Rating 600 V 800 V 600 V 800 V 600 V 800 V • lQinJk8 s/2ystem Current Rating 45 A 41 A 45 A 41 A 45 A 41 A - Shorting Plug Torque 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm APPLICATIONS Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 (see following page) • Installation Instructions Disconnect & Test Wire Stripping Length 10 mm 10 mm 10 mm Applications • Measuring / Control Circuits Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm • Utility Instruments an Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Transformer Applications • Grey (standard) CDS6U 50 CDS6U/TS 50 CDS6U/FT 50 Meter Replacement • Red R CDS6U/R 50 CDS6U/TS/R 50 CDS6U/FT/R 50 External Current Blue BU CDS6U/BU 50 CDS6U/TS/BU 50 CDS6U/FT/BU 50 • Measurement Black BL CDS6U/BL 50 CDS6U/TS/BL 50 CDS6U/FT/BL 50 Switch Boards Orange O CDS6U/O 50 CDS6U/TS/O 50 CDS6U/FT/O 50 Green G CDS6U/G 50 CDS6U/TS/G 50 CDS6U/FT/G 50 Yellow Y CDS6U/Y 50 CDS6U/TS/Y 50 CDS6U/FT/Y 50 White W CDS6U/W 50 CDS6U/TS/W 50 CDS6U/FT/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDS6U 50 EPCDS6U 50 EPCDS6U 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA723/2 100 CA723/2 100 CA723/2 100 3 pole CA723/3 50 CA723/3 50 CA723/3 50 4 pole CA723/4 50 CA723/4 50 CA723/4 50 10 pole CA723/10 10 CA723/10 10 CA723/10 10 Slide Shorting Link 2 pole SLS2 50 SLS2 50 – – 3 pole SLS3 25 SLS3 25 – – 4 pole SLS4 25 SLS4 25 – – Insulated grey TPSLS 100 – – – – Test Socket red TPSLSR 100 – – – – yellow TPSLSY 100 – – – – blue TPSLSBU 100 – – – – black TPSLSBK 100 – – – – Lock Out Cap LCCDS 50 LCCDS 50 – – Shorting Plug QJ8/2 25 QJ8/2 25 – – Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) 26 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DISCONNECT & TEST Example for CDS6U Test & Disconnect Terminal Block SCREW TERMINAL BLOCKS Single Phase Current Transformer Test Circuit 3 Phase current Transformer Test Set LCCDS EPCDS6U EPCDS66 SLS2 CA72315 LCCDS CDS6U SLS2 CA202 CDSGU CA202 Operating status Operating status A 1 2 A A A 1 2 1 2 3 4 5 6 (with internal distribution of the k-point) S1 S2 S1 S2 S1 S2 S1 S2 SLS2 in open condition SLS2 in open condition L1 L1 L2 L3 Comparison measurement for L1 Comparison measurement for L1 A 1 2 Sequence for test : A A A Sequence for test : 1 2 1) Remove SLS2 screw from terminal 2. 1) Remove SLS2 screw from 1 2 3 4 5 6 2) Connect ammeter to test sockets of terminal 2. terminal 1. 3) Open disconnect slide link of terminal 2. 2) Connect ammeter to test A A sockets of terminal 1 and 2. 3) Open disconnect slide link of terminal 1. S1 S2 S1 S2 S1 S2 S1 S2 L1 SLS2 in open condition L1 L2 L3 Meter test for L1 through external power supply Meter test for L1 through external power supply A 1 2 Sequence for test : Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 1) Close short circuit slide A A A 1 2 2) Open disconnect slide link of terminal 2. SLS2 of terminals 1 and 2. 3) Connect external power supply to test sockets of 1 2 3 4 5 6 2) Open disconnect slide link terminals 1 and 2. of terminal 1. 3) Connect external power supply to test sockets of terminals 1 and 2. S1 S2 S1 S2 S1 S2 S1 S2 Closing of SLS2 L1 L1 L2 L3 Meter replacement Meter Replacement for L1 A 1 2 Sequence for test : Sequence for test : 1) Close short circuit slide SLS2 of terminals 1 and 2. 1) Close short circuit slide A A A 1 2 2) Open disconnect slide link of terminal 2. SLS2 of terminals 1 and 2. 1 2 3 4 5 6 3) Disconnect meter for L1 at terminals 1 and 2. 2) Open disconnect slide link of terminal 1. 3) Disconnect meter for L1. S1 S2 S1 S2 S1 S2 S1 S2 Closing of SLS2 L1 L1 L2 L3 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 27

DISCONNECT & TEST BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CKT4U CKT4U/4 HIGHLIGHTS FEATURES • Knife / Blade Style Discon- nect Terminals •CKT4U - Standard Knife Knife Style Disconnect Knife Style Disconnect D•iCscKoTn4nUe/c4t Dimensions & Weight 2 Connections 4 Connections - 4 Connection Width 6 mm 6 mm Knife Disconnect • Specially designed socket Length 46.3 mm 65.0 mm headed screws act as fast Height w DIN Rail 35 x 7.5 mm 48.3 mm 54.3 mm monitoring points 35 x 15 mm 56.0 mm 62.0 mm Weight per piece 10.5 g 16.6 g APPLICATIONS Technical Data/Ratings • Disconnect & Test Approvals Applications CSCBHEME E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 600 V 800 V 600 V 800 V Current Rating 35 A 16 A 28 A 20 A 17.5 A Torque 7lb-in 7lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CKT4U 50 CKT4U/4 50 Red R CKT4U/R 50 CKT4U/4/R 50 Blue BU CKT4U/BU 50 CKT4U/4/BU 50 Black BL CKT4U/BL 50 CKT4U/4/BL 50 Orange O CKT4U/O 50 CKT4U/4/O 50 Green G CKT4U/G 50 CKT4U/4/G 50 Yellow Y CKT4U/Y 50 CKT4U/4/Y 50 White W CKT4U/W 50 CKT4U/4/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCKT4U 50 EPCKT4U/4 50 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA202 25 CA202 25 External Jumper 2 pole CA714/2 100 CA714/2* 100 3 pole CA714/3 100 CA714/3* 100 4 pole CA714/4 100 CA714/4* 100 10 pole CA714/10 20 CA714/10* 20 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) * Insulated External shorting links can be used only in the upper level clamping unit of the Terminal Block. 28 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DISCONNECT & TEST BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CKT4SP CF4SPFT CF4SP HIGHLIGHTS FEATURES • Knife Style Disconnect Terminal •CF4SPFT same profile Knife Style Disconnect Feed-Through Terminal Fuse Block Dimensions & Weight Same profile as CF4SP Fuse Block Same profile as CF4SP Fuse Block 5x20 mm Fuse Type •FCeFe4dS TPhrough Terminal same profile as Width 6 mm 6 mm 8 mm Fuse Terminal, 5 x 20 mm Length 58.5 mm 58.5 mm 57.0 mm Fuse Types Height w DIN Rail 35 x 7.5 mm 46.0 mm 46.0 mm 50.3 mm 35 x 15 mm 53.5 mm 53.5 mm 57.6 mm APPLICATIONS • Weight per piece 27.2 g g 16.9 g Control Systems with Fuse Technical Data/Ratings Protection • Approvals Fused Control Circuits with alternating configurations CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 (CF4SP, CF4SPFT, Wire Size (solid / stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 CGT4SP) • Voltage Rating 600 V 1000 V 600 V 1000 V 600 V 1000 V AC/DC Switch Boards Current Rating 30 A 28 A 30 A 32 A 10 A 10 A Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CKT4SP 50 CF4SPFT 50 CF4SP 50 Red R CKT4SP/R 50 CF4SPFT/R 50 CF4SP/BU 50 Blue BU CKT4SP/BU 50 CF4SPFT/BU 50 CF4SP/BL 50 Black BL CKT4SP/BL 50 CF4SPFT/BL 50 Orange O CKT4SP/O 50 CF4SPFT/O 50 Green G CKT4SP/G 50 CF4SPFT/G 50 Yellow Y CKT4SP/Y 50 CF4SPFT/Y 50 White W CKT4SP/W 50 CF4SPFT/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 – – CA802 50 CA802 50 – – CA202 25 CA202 25 – – Internal Jumper 2 pole CA722/2 100 CA722/2 100 CA722/2 100 3 pole CA722/3 100 CA722/3 100 CA722/3 100 4 pole CA722/4 100 CA722/4 100 CA722/4 100 10 pole CA722/10 10 CA722/10 10 CA722/10 10 100 pole CA722/100 10 CA722/100 10 CA722/100 10 Insulated 2 pole CA742/2 100 CA742/2 100 CA742/2 100 Internal Jumper 3 pole CA742/3 100 CA742/3 100 CA742/3 100 4 pole CA742/4 100 CA742/4 100 CA742/4 100 10 pole CA742/10 10 CA742/10 10 CA742/10 10 100 pole CA742/100 10 CA742/100 10 CA742/100 10 External Jumper 2 pole CA714/2 100 CA714/2 100 CA714/2 100 3 pole CA714/3 100 CA714/3 100 CA714/3 100 4 pole CA714/4 100 CA714/4 100 CA714/4 100 10 pole CA714/10 20 CA714/10 20 CA714/10 20 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 29

DISCONNECT & TEST SLIDER STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDTTU CDTTU-SH CDTTUFT HIGHLIGHTS FEATURES • Slider Style Disconnect Terminals •CDTTU - Standard Slider Slider Disconnect Terminal Slider Double Disconnect Feed Through Terminal Disconnect •CDTTU-SH Dimensions & Weight Terminal Slider Disconnect Profile - Double Disconnect Terminal Width 8 mm 16 mm 8 mm •CDTTUFT - Same profile Length 63 mm 63 mm 63 mm Feed-Through • Height w DIN Rail 35 x 7.5 mm 58.7 mm 58.7 mm 58.7 mm Specially designed socket 35 x 15 mm 65.7 mm 65.7 mm 65.7 mm headed screws act as fast monitoring points Weight per piece 28.5 g 59.2 g 27.1 g • Disconnect is achieved by Technical Data/Ratings operating sliding link with Approvals screw driver CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 APPLICATIONS Wire Size (solid / stranded) 16-8 AWG 1.5-10 mm2 16-8 AWG 16-8 AWG 1.5-10 mm2 16-8 AWG 1.5-10 mm2 • Voltage Rating 600 V 800 V 300 V 300 V 160 V 600 V 800 V Disconnect & Test Current Rating 41 A 57 A 25 A 25 A 10 A 41 A 57 A Applications Torque 14 lb-in 1.2 Nm 14lb-in 14lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 12 mm 12 mm 12 mm Screwdriver Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CDTTU 50 CDTTU-SH 20 CDTTUFT 50 Red R CDTTU/R 50 CDTTU-SH/R 20 CDTTUFT/R 50 Blue BU CDTTU/BU 50 CDTTU-SH/BU 20 CDTTUFT/BU 50 Black BL CDTTU/BL 50 CDTTU-SH/BL 20 CDTTUFT/BL 50 Orange O CDTTU/O 50 CDTTU-SH/O 20 CDTTUFT/O 50 Green G CDTTU/G 50 CDTTU-SH/G 20 CDTTUFT/G 50 Yellow Y CDTTU/Y 50 CDTTU-SH/Y 20 CDTTUFT/Y 50 White W CDTTU/W 50 CDTTU-SH/W 20 CDTTUFT/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDTTU 50 EPCDTTU 50 EPCDTTU 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Shorting Plug 2 pole QJ8/2 25 QJ8/2 25 QJ8/2 25 External Jumper 2 pole CA710/2 100 CA710/2 100 CA710/2 100 3 pole CA710/3 50 CA710/3 50 CA710/3 50 4 pole CA710/4 50 CA710/4 50 CA710/4 50 10 pole CA710/10 20 CA710/10 20 CA710/10 20 Shorting Plug QJ8/2 25 – – QJ8/2 25 Marking Tag MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) 30 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DISCONNECT & TEST LEVER STYLE DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CSDL4U DDDL4U HIGHLIGHTS FEATURES • Lever Style Disconnect Terminals Lever Style Disconnect Lever Style Disconnect •CSDL4U Dimensions & Weight Bottom Level Feed Through - Standard Lever Disconnect Width 8 mm 8 mm •DDDL4U - Lever Length 58 mm 88 mm Disconnect with Lower Level Feed-Through Height w DIN Rail 35 x 7.5 mm 44.5 mm 67.4 mm • CAFL4U 35 x 15 mm 52.0 mm 74.3 mm Same profile as Weight per piece 15.0 g 27.0 g APPLICATIONS Technical Data/Ratings • Disconnect Applications Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000 V 600 V 600 V 800 V Current Rating Top 14 A 10 A 6.3 A 14 A 10 A Bottom - - 35 A 32 A 32 A Torque 7 lb-in 0.5 Nm 7lb-in 7lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CSDL4U 100 DDDL4U 20 Red R CSDL4U/R 100 DDDL4U/R 20 Blue BU CSDL4U/BU 100 DDDL4U/BU 20 Black BL CSDL4U/BL 100 DDDL4U/BL 20 Orange O CSDL4U/O 100 DDDL4U/O 20 Green G CSDL4U/G 100 DDDL4U/G 20 Yellow Y CSDL4U/Y 100 DDDL4U/Y 20 White W CSDL4U/W 100 DDDL4U/W 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCSFL4U 50 EPDDFL4U 50 Isolation Partition PPCSFL4U 50 – – DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA202 50 CA202 50 Internal Jumper 2 pole – – CA729/2 100 3 pole – – CA729/3 50 4 pole – – CA729/4 50 10 pole – – CA729/10 10 Insulated Jumper 2 pole – – CA749/2 100 3 pole – – CA749/3 50 4 pole – – CA749/4 50 10 pole – – CA749/10 10 External Jumper 2 pole CA711/2 100 CA711/2 100 3 pole CA711/3 50 CA711/3 50 4 pole CA711/4 50 CA711/4 50 10 pole CA711/10 20 CA711/10 2 Marking Tag on terminal MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) on lever MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 31

DISTRIBUTION SIDE FEED DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDB4/X(1) HIGHLIGHTS FEATURES • Dimensions & Weight 50A Distribution Distribution blocks with Terminal Block Side Feed various output Width 6 Outputs 52.0 mm configurations • 8 Outputs 58.0 mm Stud/Bolt to secure 10 Outputs 64.0 mm incoming wire • 12 Outputs 70.0 mm Internally connected 14 Outputs 76.0 mm •terminals 22 Outputs 100.0 mm Side/center feed versions 24 Outputs 106.0 mm • •up to 150A Length 43 mm Protective shield for Height w DIN Rail 35 x 7.5 mm 46.2 mm incoming wire 35 x 15 mm 53.7 mm APPLICATIONS General Specifications • Phase Distribution Application Simplified distribution Approvals with CDB Terminals systems • CSCBHEME Phase distribution E220514 60947-7-1 application Voltage Rating 600 V 800 V AC/DC INSTALLATION NOTES Insulation Material Polyamide 66 • INPUT Sum of outgoing wires not to exceed incoming current Technical Data/Ratings • Higher output currents Wire Size (solid / stranded) 10-8 AWG 6-16 mm2 should be connected close Current Rating 50 A 64 A to the input Torque 26 lb-in 2.0 Nm Installation Instructions Wire Stripping Length 8 mm Screwdriver Hex Nut Driver M8 M1 M2 M3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 Current Rating 35 A 64 A* Torque 7 lb-in 0.5 Nm Installation Instructions Wire Stripping Length 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Grey (standard) 6 Outputs CDB4/2(1) 10 8 Outputs CDB4/3(1) 10 10 Outputs CDB4/4(1) 10 12 Outputs CDB4/5(1) 5 14 Outputs CDB4/6(1) 5 22 Outputs CDB4/10(1) 5 24 Outputs CDB4/11(1) 5 Accessories Cat. No. Std. Pk. DIN Rail 2511120 20 CA701-15/S 20 2511160 10 End Stop CA702 50 CA802 50 Marking Tag MT6 1 Pk. (100 tags) * Total output current of system 32 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DISTRIBUTION CENTER FEED DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDB4/X CDB6/X CDB10/X CDB25/X Dimensions & Weight 50A Distribution 100A Distribution 130A Distribution 150A Distribution Terminal Block Center Feed Terminal Block Center Feed Terminal Block Center Feed Terminal Block Center Feed Width 4 Outputs 44.0 mm 48.0 mm - - 8 Outputs 56.0 mm 64.0 mm 72.0 mm 88.0 mm 12 Outputs 68.0 mm 80.0 mm 92.0 mm 112.0 mm 16 Outputs 80.0 mm 96.0 mm 112.0 mm 136.0 mm 20 Outputs 96.0 mm - - - 24 Outputs 108.0 mm - - - Length 43 mm 48 mm 48 mm 49 mm Height w DIN Rail 35 x 7.5 mm 46.2 mm 47.8 mm 47.8 mm 57.2 mm 35 x 15 mm 53.7 mm 55.5 mm 55.5 mm 64.7 mm General Specifications Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 INPUT Technical Data/Ratings Wire Size (solid / stranded) 10-8 AWG 6-16 mm2 10-2 AWG 6-25 mm2 8-1/0 AWG 10-35 mm2 6-2/0 AWG 10-50 mm2 Current Rating 50 A 64 A 100 A 82 A 130 A 114 A 150 A 150 A Torque 26 lb-in 2.0 Nm 35 lb-in 3.0 Nm 53 lb-in 6.0 Nm 53 lb-in 6.0 Nm Installation Instructions Wire Stripping Length 8 mm 9 mm 11 mm 14 mm Screwdriver Hex Nut Driver M8 Hex Nut Driver M10 Hex Nut Driver M13 Hex Nut Driver M15 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 1.5-6 mm2 22-6 AWG 1.5-10 mm2 12-2 AWG 6-25 mm2 Current Rating (per output) 35 A 32 A 50 A 41 A 65 A 57 A 75 A 75 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm Installation Instructions Wire Stripping Length 8 mm 9 mm 11 mm 14 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) 4 Outputs CDB4/1 10 CDB6/1 10 - - CDB25/1 10 8 Outputs CDB4/2 10 CDB6/2 10 CDB10/2 10 CDB25/2 10 12 Outputs CDB4/3 10 CDB6/3 10 CDB10/3 10 CDB25/3 10 16 Outputs CDB4/4 10 CDB6/4 5 CDB10/4 5 CDB25/4 5 20 Outputs CDB4/5 5 - - - - - - 24 Outputs CDB4/6 5 - - - - - - Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 33

DISTRIBUTION MULTI I/O DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CMDB4/X CMDB6/X CMDB10/X CMDB25/X Dimensions 35 A Distribution Terminal Block 50 A Distribution Terminal Block 65 A Distribution Terminal Block 85 A Distribution Terminal Block Width 2 pole 13.5 mm 17.5 mm 21.5 mm 26.0 mm 3 pole 19.5 mm 25.5 mm 31.5 mm 38.0 mm 4 pole 25.5 mm 33.5 mm 41.5 mm 50.0 mm 10 pole 61.5 mm 81.5 mm 101.5 mm 62.0 mm Length 43 mm 48 mm 48 mm 49 mm Height w DIN Rail 35 x 7.5 mm 46.2 mm 47.8 mm 47.8 mm 57.2 mm 35 x 15 mm 53.7 mm 55.5 mm 55.5 mm 64.7 mm Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 1.5-6 mm2 22-6 AWG 1.5-10 mm2 12-4 AWG 6.0-25 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 800V AC/DC Current Rating 35 A 32 A 50 A 41 A 65 A 57 A 85 A 101 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 9 mm 11 mm 14 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Terminal Blocks 4 Outputs Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMDB4/2 10 CMDB6/2 10 CMDB10/2 10 CMDB25/2 10 Red R CMDB4/2/R 10 CMDB6/2/R 10 CMDB10/2/R 10 CMDB25/2/R 10 Blue BU CMDB4/2/BU 10 CMDB6/2/BU 10 CMDB10/2/BU 10 CMDB25/2/BU 10 Black BL CMDB4/2/BL 10 CMDB6/2/BL 10 CMDB10/2/BL 10 CMDB25/2/BL 10 6 Outputs Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMDB4/3 10 CMDB6/3 10 CMDB10/3 10 CMDB25/3 10 Red R CMDB4/3/R 10 CMDB6/3/R 10 CMDB10/3/R 10 CMDB25/3/R 10 Blue BU CMDB4/3/BU 10 CMDB6/3/BU 10 CMDB10/3/BU 10 CMDB25/3/BU 10 Black BL CMDB4/3/BL 10 CMDB6/3/BL 10 CMDB10/3/BL 10 CMDB25/3/BL 10 8 Outputs Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMDB4/4 10 CMDB6/4 10 CMDB10/4 10 CMDB25/4 10 Red R CMDB4/4/R 10 CMDB6/4/R 10 CMDB10/4/R 10 CMDB25/4/R 10 Blue BU CMDB4/4/BU 10 CMDB6/4/BU 10 CMDB10/4/BU 10 CMDB25/4/BU 10 Black BL CMDB4/4/BL 10 CMDB6/4/BL 10 CMDB10/4/BL 10 CMDB25/4/BL 10 20 Outputs Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMDB4/10 10 CMDB6/10 10 CMDB10/10 5 CMDB25/10 10 Red R CMDB4/10/R 10 CMDB6/10/R 10 CMDB10/10/R 5 CMDB25/10/R 10 Blue BU CMDB4/10/BU 10 CMDB6/10/BU 10 CMDB10/10/BU 5 CMDB25/10/BU 10 Black BL CMDB4/10/BL 10 CMDB6/10/BL 10 CMDB10/10/BL 5 CMDB25/10/BL 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT12 1 Pk. (100 tags) 34 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

DISTRIBUTION COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXDB35/10 CXDB35/10A HIGHLIGHTS FEATURES • with Hybrid Distribution Allen Screw Terminal Block • Screw input (115A) • 4 spring clamp outputs 1 Flat Head Screw Input 1 Hex Screw Input • (4 x41A) 4 Spring Clamp Outputs 4 Spring Clamp Outputs Modular system Dimensions & Weight • Standard slot & hex screw versions • Width 16 mm 16 mm Expandable with standard CX Series Length 81.6 mm 81.6 mm jumpers and terminal blocks Height w DIN Rail 35 x 7.5 mm 46.8 mm 46.8 mm • Easy Installation 35 x 15 mm 54.3 mm 54.3 mm Weight per piece 53.2 g 53.2 g APPLICATIONS General Specifications • Miniature Circuit Breaker (MCB) Approvals distribution • CSCBHEME Limited space distribution E220514 60947-7-1 E220514 60947-7-1 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Insulation Material Polyamide 66 Polyamide 66 Output Expansion INPUT Technical Data/Ratings CXDB35/10A Wire Size (solid / stranded) 14-2 AWG 1.5-35 mm2 14-2 AWG 1.5-35 mm2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm 2 x CX6 Installation Instructions Terminal Blocks (see page 64) Wire Stripping Length 17 mm 17 mm Screwdriver Flat Head 1.0 x 5.5 mm Hex Screw M5 JX6/3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 24-8 AWG 0.2-10 mm2 24-8 AWG 0.2-10 mm2 Current Rating 41 A 41 A 41 A 41 A MCB Distribution Example Installation Instructions Wire Stripping Length 15 mm 15 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CXDB35/10 20 CXDB35/10A 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 End Clamp CA702 50 CA702 50 CA802 50 CA802 50 CA103 50 CA103 50 Jumpers JX6/2 100 JX6/2 100 JX6/3 50 JX6/3 50 JX6/4 50 JX6/4 50 JX6/10 10 JX6/10 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 35

DISTRIBUTION GROUNDING NEUTRAL CLAMPS GROUNDING SYSTEM CENC4 CENC16 CENC35 HIGHLIGHTS FEATURES Dimensions & Weight • 3 Clamp Sizes Width 7.5 mm 9.8 mm 14.5 mm • Panel Mount • Length 23.3 mm 23.3 mm 27.3 mm NES • Weight per piece 8 g 10.5 g 20 g NEB6 • DI•N Rail Mount Technical Data/Ratings CA202 • Approvals NEB10 • Tin Plated Copper Busbars CSCBHEME • E220514 60947-7-2 E220514 60947-7-2 E220514 60947-7-2 Busbar Current rating140A Wire Size (solid / stranded) 22-12 AWG 22-12 AWG 0.2-6 mm2 10-6 AWG 10-6 AWG 10-16 mm2 8-2 AWG 8-2 AWG 10-35 mm2 •Standard Color: Green Voltage Rating 600 V 600 V 800 V 600 V 600 V 800 V 600 V 600 V 800 V Various colors Current Rating - - 37 A - - 76 A - - 125 A Torque 14lb-in 14lb-in 0.8 Nm 17.5lb-in 17.5lb-in 2.0 Nm 25lb-in 25lb-in 2.5 Nm APPLICATIONS • Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Grounding Solution • Installation Instructions Terminating Neutral an Grounding Wires to a Wire Stripping Length 12 mm 16 mm 16 mm •single busbar Screwdriver Flat Head 0.8 x 4 mm Flat Head1.0 x 5.5 mm Flat Head1.0 x 5.5 mm Distribution Applications Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Green (standard) CENC4 50 CENC16 50 CENC35 50 Black BL CENC4/BL 50 CENC16/BL 50 CENC35/BL 50 Blue BU CENC4/BU 50 CENC16/BU 50 CENC35/BU 50 Grey GR CENC4/GR 50 CENC16/GR 50 CENC35/GR 50 Yellow Y CENC4/Y 50 CENC16/Y 50 CENC35/Y 50 Mounting Accessories Panel Mount Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Busbar NEB6 1 m NEB6 1 m NEB6 1 m (6 x 6 mm) Plastic Support NES 50 NES 50 NES 50 with Fixing Screw Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Mounting Accessories DIN Rail Mount Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Busbar NEB10 1 m NEB10 1 m NEB10 1 m (10 x 3 mm) End Clamp/Busbar CA202 50 CA202 50 CA202 50 support for rail mounting Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Panel Mount DIN Rail Mount AssemblyExample AssemblyExample CENC16 NEB10 Busbar CENC4 CENC16 NEB6 Busbar NES Plastic Support CA202 Mounting Support 36 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

HIGH VOLTAGE HIGH VOLTAGE TERMINAL BLOCKS SCREW TERMINAL BLOCKS CHV4U CHV6U CHV10U HIGHLIGHTS FEATURES Dimensions & Weight • High Voltage Terminal Width 6 mm 8 mm 10 mm Blocks • Length 52 mm 52 mm 52 mm •1000V UL Rating 1500V IEC DC Rating Height w DIN Rail 35 x 7.5 mm 63.4 mm 63.4 mm 63.4 mm • Same Profile on all Current 35 x 15 mm 70.8 mm 70.8 mm 70.8 mm Ratings Weight per piece 11.0 g 16.0 g 21.6 g Technical Data/Ratings APPLICATIONS • Approvals Solar Applications • CSCBHEME High Voltage Applications E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 20-6 AWG 0.2-10 mm2 Voltage Rating 1000 V 1500 V AC/DC 1000 V 1500 V AC/DC 1000 V 1500 V AC/DC Current Rating 35 A 32 A 50 A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 12 mm 14 mm 14 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CHV4U 50 CHV6U 50 CHV10U 50 Red R CHV4U/R 50 CHV6U/R 50 CHV10U/R 50 Blue BU CHV4U/BU 50 CHV6U/BU 50 CHV10U/BU 50 Black BL CHV4U/BL 50 CHV6U/BL 50 CHV10U/BL 50 Orange O CHV4U/O 50 CHV6U/O 50 CHV10U/O 50 Green G CHV4U/G 50 CHV6U/G 50 CHV10U/G 50 Yellow Y CHV4U/Y 50 CHV6U/Y 50 CHV10U/Y 50 White W CHV4U/W 50 CHV6U/W 50 CHV10U/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPUSC 50 EPUSC 50 EPUSC 50 Separator Plate SP2.5/4UN 50 SP2.5/4UN 50 SP2.5/4UN 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 25 CA202 25 CA202 25 Internal Jumper 2 pole CA623/2 100 CA624/2 100 CA625/2 100 3 pole CA623/3 100 CA624/3 100 CA625/3 100 4 pole CA623/4 100 CA624/4 100 CA625/4 100 10 pole CA623/10 10 CA624/10 10 CA625/10 10 100 pole Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 37

THERMOCOUPLE THERMOCOUPLE BLOCKS SCREW TERMINAL BLOCKS CTT2.5UK/J/T/E HIGHLIGHTS FEATURES • Thermocouple terminal blocks are used to extend Dimensions & Weight CTT2.5UX thermocouple compensating lines in Width 10 mm measuring circuits • The current bar of the Length 43 mm terminal block is made of Height w DIN Rail 35 x 7.5 mm 46.2 mm the same material as the 35 x 15 mm 53.7 mm thermocouple wire (As per •EN 60584/DINEN 60584) Weight per piece 12.4 g No loss of potential at the Technical Data/Ratings connection points • Approvals KAv Tayilpaeble types: - Chromel (NiCr), CSCBHEME AJ luTympeel (Ni) 60947-7-1 - Iron (Fe), Wire Size (solid / stranded) 22-14 AWG 0.2-2.5 mm2 CT oTnyspteantan (CuNi) Voltage Rating 1000 V AC/DC - Copper (Cu), CE oTnyspteantan (CuNi) Current Rating 10 A - Chromel (NiCr), Torque 7 lb-in / 0.4 Nm Constantan (CuNi) APPLICATIONS Insulation Material Polyamide 66 • Installation Instructions Measurement applications Wire Stripping Length 8 mm Screwdriver Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Grey U Type CTT2.5UK 50 J Type CTT2.5UJ 50 T Type CTT2.5UT 50 G Type CTT2.5UG 50 Accessories Cat. No. Std. Pk. End Plate EP2.5/4UN 50 Partition Plate PP2.5/4UN 50 DIN Rail 2511120 20 CA701-15/S 20 2511160 10 End Stop CA702 100 CA802 100 Marking Tag INCLUDED Typical Temperature Measuring Circuit Thermocouple Terminal Block Compensating Cable Supply Cable Thermocouple Measuring (Sensor) Instrument Thermocouple Reference Terminal Block Junction 38 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

TAB CONNECTION TAB CONNECTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTC4U HHIIGGHHLLIIGGHHTTSS FEATURES Dimensions & Weight • Standard tab connection Width 6 mm terminals • Length 47 mm Quick-Connect Tabs Height w DIN Rail 35 x 7.5 mm 51.2 mm APPLICATIONS 35 x 15 mm 58.8 mm • Weight per piece 8.0 g Transportation • Technical Data/Ratings Railroad Applications Approvals CSCBHEME 60947-7-1 Wire Size (solid | stranded) 0.2-4.0 mm2 | 24-12 AWG Voltage Rating 300 V Current Rating 32 A Tab (Blade) Size 6.3 x 0.8 mm Insulation Material Polyamide 66 Installation Instructions Wire Stripping Length 9 mm Terminal Blocks Cat. No. Std. Pk. Grey (standard) CTC4U 100 Red R CTC4U/R 100 Blue BU CTC4U/BU 100 Black BL CTC4U/BL 100 Orange O CTC4U/O 100 Green G CTC4U/G 100 Yellow Y CTC4U/Y 100 White W CTC4U/W 100 Accessories Cat. No. Std. Pk. End Plate EPCTC4U 50 DIN Rail 2511120 20 CA701-15/S 20 2511160 10 End Stop CA702 100 CA802 100 Test Socket CA707/TS/01 Marking Tag MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 39

SPRING LOADED FEED-THROUGH TERMINAL BLOCKS SCREW TERMINAL BLOCKS CTS4USC CTS6USC CTS10USC HIGHLIGHTS FEATURES • Feed Through Terminals Feed Through Terminal Feed Through Terminal Feed Through Terminal with Springs below clamps • Dimensions & Weight Spring Loaded Spring Loaded Spring Loaded High torque screws • Built-in springs guarantee Width 6 mm 8 mm 10 mm secure connection even Length 52 mm 52 mm 52 mm when screw is not tight • 4 mm, 6 mm, 10mm Height w DIN Rail 35 x 7.5 mm 63.4 mm 63.4 mm 63.4 mm terminal blocks with same 35 x 15 mm 70.8 mm 70.8 mm 70.8 mm size profile Weight per piece 13.0 g 10.0 g 12.6 g • It is recommended to use Technical Data/Ratings hook type lugs/ ferrules for Approvals wire termination • Both, high-torque screws CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 •and built-in spring Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 20-6 AWG 0.2-10 mm2 Various disconnect Voltage Rating 600 V 1500V AC/DC 1000 V 1500V AC/DC 1000 V 1500V AC/DC terminals Current Rating 35 A 32 A 50 A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm APPLICATIONS • Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Vibration Applications • Projects which follow the Installation Instructions f•ollowing safety regulations: Wire Stripping Length 12 mm 14 mm 14 mm Electric Supply Standard Screwdriver Flat Head0.6 x 3.5 mm Flat Head0.8 x 4 mm Flat Head0.8 x 4 mm (ESI) • •British CEGB Standard Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. NTPC standard Grey (standard) CTS4USC 50 CTS6USC 50 CTS10USC 50 Red R CTS4USC/R 50 CTS6USC/R 50 CTS10USC/R 50 Blue BU CTS4USC/BU 50 CTS6USC/BU 50 CTS10USC/BU 50 Black BL CTS4USC/BL 50 CTS6USC/BL 50 CTS10USC/BL 50 Orange O CTS4USC/O 50 CTS6USC/O 50 CTS10USC/O 50 Green G CTS4USC/G 50 CTS6USC/G 50 CTS10USC/G 50 Yellow Y CTS4USC/Y 50 CTS6USC/Y 50 CTS10USC/Y 50 White W CTS4USC/W 50 CTS6USC/W 50 CTS10USC/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPUSC 50 EPUSC 50 EPUSC 50 Separator Plate SP2.5/4UN 50 SP2.5/4UN 50 SP2.5/4UN 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 100 CA702 100 CA702 100 CA802 50 CA802 50 CA802 50 CA202 50 CA202 50 CA202 50 Hook Type 1.5 mm2 CA604/1 100 CA604/1 100 CA604/1 100 Lug / Ferrule 2.5 mm2 CA604/2 100 CA604/2 100 CA604/2 100 4 mm2 CA604/5 100 CA604/5 100 CA604/5 100 6 mm2 – – CA604/4 100 CA604/4 100 10 mm2 – – – – CA604/3 100 Pre Assembled 2 pole CA623/2 100 CA624/2 100 CA625/2 100 Jumpers 3 pole CA623/3 100 CA624/3 100 CA625/3 100 4 pole CA623/4 100 CA624/4 100 CA625/4 100 10 pole CA623/10 10 CA624/10 10 CA625/10 10 Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) 40 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

SPRING LOADED DISCONNECT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CKT4SPSC CDS6U/SC CDTTUSC CDTTUFTSC Knife Disconnect Slider Disconnect Slider Disconnect Feed Through Terminal Dimensions & Weight Spring Loaded Terminal Spring Loaded Terminal Spring Loaded Terminal Same profile as CDTTUSC Width 6 mm 8 mm 8 mm 8 mm Length 58.5 mm 82 mm 63 mm 63 mm Height w DIN Rail 35 x 7.5 mm 46.0 mm 51.0 mm 58.7 mm 58.7 mm 35 x 15 mm 53.5 mm 59.2 mm 65.7 mm 65.7 mm Weight per piece 14.1 g 30.9 g 31.0 g 25.4 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 24-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 16-8 AWG 1.5-10 mm2 16-8 AWG 1.5-10 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 30 A 28 A 45 A 41 A 41 A 57 A 41 A 57 A Torque 4.5 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 10 mm 12 mm 12 mm Screwdriver Flat Head0.6 x 3.5 mm Flat Head0.8 x 4 mm Flat Head1.0 x 5.5 mm Flat Head1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CKT4SPSC 50 CDS6U/SC 50 CDTTUSC 50 CDTTUFTSC 50 Red R CKT4SPSC/R 50 CDS6U/SC/R 50 CDTTUSC/R 50 CDTTUFTSC/R 50 Blue BU CKT4SPSC/BU 50 CDS6U/SC/BU 50 CDTTUSC/BU 50 CDTTUFTSC/BU 50 Black BL CKT4SPSC/BL 50 CDS6U/SC/BL 50 CDTTUSC/BL 50 CDTTUFTSC/BL 50 Orange O CKT4SPSC/O 50 CDS6U/SC/O 50 CDTTUSC/O 50 CDTTUFTSC/O 50 Green G CKT4SPSC/G 50 CDS6U/SC/G 50 CDTTUSC/G 50 CDTTUFTSC/G 50 Yellow Y CKT4SPSC/Y 50 CDS6U/SC/Y 50 CDTTUSC/Y 50 CDTTUFTSC/Y 50 White W CKT4SPSC/W 50 CDS6U/SC/W 50 CDTTUSC/W 50 CDTTUFTSC/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate – – EPCDS6U 50 EPCDTTU 50 EPCDTTU 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 100 CA702 100 CA702 100 CA702 100 CA802 50 CA802 50 CA802 50 CA802 50 CA202 50 CA202 50 CA202 50 CA202 50 Pre Assembled 2 pole CA722/2 100 CA723/2 100 – – – – Jumpers 3 pole CA722/3 100 CA723/3 50 – – – – 4 pole CA722/4 100 CA723/4 50 – – – – 10 pole CA722/10 10 CA723/10 10 – – – – 100 pole CA722/100 10 – – – – – – Insulated Jumpers 2 pole CA742/2 100 – – – – – – 3 pole CA742/3 100 – – – – – – 4 pole CA742/4 100 – – – – – – 10 pole CA742/10 10 – – – – – – 100 pole CA742/100 10 – – – – – – External Jumpers 2 pole CA714/2 100 – – CA710/2 100 CA710/2 100 3 pole CA714/3 100 – – CA710/3 50 CA710/3 50 4 pole CA714/4 100 – – CA710/4 50 CA710/4 50 10 pole CA714/10 20 – – CA710/10 20 CA710/10 20 Shorting Plug – – – – QJ8/2 25 – – Marking Tag MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT8 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 41

ELECTRONIC COMPONENTS DIODE CIRCUIT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)D1/D2 CDL4U(E)D3 CDL4U(E)DD1/DD2 HIGHLIGHTS FEATURES • Various configurations of 1 2 1 2 Esoleldcetrroendic i nctoom CpDoLn4eUnts 3 4 1 2 3 +4 double level terminal block CDL4U(E)D1 CDL4U(E)DD1 • Various Diode / Resistor 1 2 3 4 1 2 CDL4U(E)D3 combinations •4 connection points for 3 4 3 -4 convenient wiring CDL4U(E)D2 CDL4U(E)DD2 • Terminal Block with open Arc Suppression circuit diode for Diode reverse polarity Diode circuit for lamp testing CDL4U(O) current bar can Dimensions & Weight contactors and solenoid valves protection be individually soldered with Width 6 mm 6 mm 6 mm electronic components • CDL4USP Length 55.5 mm 55.5 mm 55.5 mm Spacer can be used to cover overlapping Height w DIN Rail 35 x 7.5 mm 55.7 mm 55.7 mm 55.7 mm components when soldered 35 x 15 mm 63.1 mm 63.1 mm 63.1 mm individually Weight per piece 13.6 g 13.4 g 13.4 g Technical Data/Ratings APPLICATIONS Approvals • •Reverse polarity protection CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Lamp testing Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage - - - Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)D1 100 CDL4U(E)D3 100 CDL4U(E)DD1 100 CDL4U(E)D2 100 CDL4U(E)DD2 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U SPACER End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Internal Jumper 2 pole CA727/2 100 CA727/2 100 CA727/2 100 Spacer to cover electronic 3 pole CA727/3 100 CA727/3 100 CA727/3 100 components which stick 4 pole CA727/4 100 CA727/4 100 CA727/4 100 out of CDL4U(O) 10 pole CA727/10 10 CA727/10 10 CA727/10 10 Cat. No. Std. Pk. Marking Tag MMTT22 11 PPkk.. ((110000 ttaaggss)) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) CDL4USP 50 42 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ELECTRONIC COMPONENTS DIODE CIRCUIT TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)DD3/DD4 CDL4U(E)D4 CDL4U(E)DD5 1 2 +3 +4 1 2 1 2 CDL4U(E)DD3 1 2 3 +4 3 +4 CDL4U(E)D4 CDL4U(E)DD5 +3 +4 CDL4U(E)DD4 Diode circuit for lamp testing Diode circuit for lamp testing Diode circuit for lamp testing Dimensions & Weight with LED series resistance with LED series resistance Width 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 55.7 mm 55.7 mm 55.7 mm 35 x 15 mm 63.1 mm 63.1 mm 63.1 mm Weight per piece 13.6 g 13.6 g 13.6 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage - - - Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)DD3 100 CDL4U(E)D4/12V 100 CDL4U(E)DD5/12V 100 CDL4U(E)DD4 100 CDL4U(E)D4/24V 100 CDL4U(E)DD5/24V 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Internal Jumper 2 pole CA727/2 100 CA727/2 100 CA727/2 100 3 pole CA727/3 100 CA727/3 100 CA727/3 100 4 pole CA727/4 100 CA727/4 100 CA727/4 100 10 pole CA727/10 10 CA727/10 10 CA727/10 10 Marking Tag MMTT22 11 PPkk.. ((110000 ttaaggss)) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 43

ELECTRONIC COMPONENTS INDICATOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)N1 CDL4U(E)LD5 CDL4U(E)LD3 HIGHLIGHTS FEATURES • Various configurations of 1 2 1 +1 Electronic comCpDoLn4eUnts soldered into •double level terminal block 3 4 3 44 3 -4 Various Indicator options CDL4U(E)N1 CDL4U(E)LD5 CDL4U(E)LD3 • AC voltage indicator • DC voltage indicator AC Voltage indicator with Neon AC Voltage indicator with LED AC Voltage indicator with LED • Dimensions & Weight lamp LED and Neon lamp • versions Width 6 mm 6 mm 6 mm 4 connection points for convenient wiring Length 55.5 mm 55.5 mm 55.5 mm • Terminal BloCcDk Lw4itUh( Oop)en Height w DIN Rail 35 x 7.5 mm 55.7 mm 55.7 mm 55.7 mm current bar can 35 x 15 mm 63.1 mm 63.1 mm 63.1 mm be individually soldered Weight per piece 13.6 g 12.4 g 12.4 g with electronic components • CDL4USP Technical Data/Ratings Spacer can be used to cover overlapping Approvals components when CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 soldered individually Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 APPLICATIONS Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC • AC voltage indication Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A • DC voltage indication Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage 110, 220 VAC 24, 48, 110, 220 VAC 12, 24 VAC Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)N1/110V 100 CDL4U(E)LD5/24V 100 CDL4U(E)LD3/12V 100 CDL4U(E)N1/220V 100 CDL4U(E)LD5/48V 100 CDL4U(E)LD3/24V 100 CDL4U(E)LD5/110V 100 CDL4U(E)LD5/220V 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Internal Jumper 2 pole CA727/2 100 CA727/2 100 CA727/2 100 3 pole CA727/3 100 CA727/3 100 CA727/3 100 4 pole CA727/4 100 CA727/4 100 CA727/4 100 10 pole CA727/10 10 CA727/10 10 CA727/10 10 Marking Tag MMTT22 11 PPkk.. ((110000 ttaaggss)) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) 44 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ELECTRONIC COMPONENTS INDICATOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)LD1/LD2 CDL4U(E)LD4 CDL4U(E)L1/L2 CDL4U(O) +1 +1 -3 +4 -1 -3 -4 CDL4U(E)LD1 CDL4U(E)L1 -1 +3 +4 +1 CDL4U(E)LD4 CDL4U(O) +3 +4 -3 -4 CDL4U(E)LD2 CDL4U(E)L2 DC Voltage Indicator with LED AC Voltage indicator with LED DC Voltage Indicator with LED Terminal Block with open current to solder custom Dimensions & Weight components Width 6 mm 6 mm 6 mm 6 mm Length 55.5 mm 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 55.7 mm 55.7 mm 55.7 mm 55.7 mm 35 x 15 mm 63.1 mm 63.1 mm 63.1 mm 63.1 mm Weight per piece 12.4 g 12.4 g 12.4 g 13.0 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC 600 V 300 V 500 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage 12, 24 VAC 24, 48 VAC 6, 24 VAC - Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)LD1/12V 100 CDL4U(E)LD4/24V 100 CDL4U(E)L1/6V 100 CDL4U(O) 100 CDL4U(E)LD1/24V 100 CDL4U(E)LD4/48V 100 CDL4U(E)L1/24V 100 CDL4U(E)LD2/12V 100 CDL4U(E)L2/6V 100 CDL4U(E)LD2/24V 100 CDL4U(E)L2/24V 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 Internal Jumper 2 pole CA727/2 100 CA727/2 100 CA727/2 100 CA727/2 100 3 pole CA727/3 100 CA727/3 100 CA727/3 100 CA727/3 100 4 pole CA727/4 100 CA727/4 100 CA727/4 100 CA727/4 100 10 pole CA727/10 10 CA727/10 10 CA727/10 10 CA727/10 10 Marking Tag MMTT22 11 PPkk.. ((110000 ttaaggss)) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 45

ELECTRONIC COMPONENTS SURGE SUPPRESSOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)LA CDL4U(E)3LA CDL4U(E)RC HIGHLIGHTS FEATURES • Various solutions to protect single lines against surges • Lightning Arrestors CDL4U(E)LA ( ) • CDL4U(E)MOV MOVs ( ) CDL4U(E)LA CDL4U(E)3LA CDL4U(E)RC • CDL4U(E)RC RC Circuits ( ) • Suppressor Diode Lightning Arrestor to protect 3 pole lightning arrestor to RC circuit to protect DC solenoid CDL4U(E)SD CSCBHEME data and signal lines protect line / line and valves and contactors ( ) Dimensions & Weight line / earth surges APPLICATIONS Width 18 mm 18 mm 18 mm • Length 55.5 mm 55.5 mm 55.5 mm Surge suppressor •applications Height w DIN Rail 35 x 7.5 mm 55.7 mm 55.7 mm 55.7 mm Equipment protection 35 x 15 mm 63.1 mm 63.1 mm 63.1 mm Weight per piece 30.0 g 34.2 g 22.4 g Technical Data/Ratings / Component Specifications Wire Size (solid / stranded) 22-10 AWG 22-10 AWG 22-10 AWG Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Nominal Current 10 A 5 A - Peak Current - - 2kA-6.5kA (8/20ms) Nominal Discharge Current 20 KA (8/20ms) 10 KA (8/20ms) - Response Time 100 ns 100 ns < 25 ns Capacitance < 1.5 pf < 1.0 pf 100 - 20,000 pf Voltage Rating 75, 90, 230, 600, 1000 V DC 90, 230, 350, 600 V DC 30, 60, 75, 130, 275, 460, 510, 625, 680 V AC Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)LA/75V 20 CDL4U(E)3LA/90V 20 0.1 mF CDL4U(E)LA/90V 20 CDL4U(E)3LA/230V 20 CDL4U(E)RC0.1 10 CDL4U(E)LA/230V 20 CDL4U(E)3LA/350V 20 CDL4U(E)LA/600V 20 CDL4U(E)3LA/600V 20 0.22 mF CDL4U(E)RC0.22 10 CDL4U(E)LA/1000V 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 Spacer CDL4USP 50 CDL4USP 50 CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) 46 AAlltteecchh CCoorrpp..®®•• 3355 RRooyyaall RRooaadd •• FFlleemmiinnggttoonn,, NNJJ 0088882222--66000000 •• PPhhoonnee ((990088))880066--99440000 •• FFAAXX ((990088))880066--99449900

ELECTRONIC COMPONENTS SURGE SUPPRESSOR TERMINAL BLOCKS SCREW TERMINAL BLOCKS CDL4U(E)MOV CTLG2.5(E)MOV CDL4U(E)SD SDUA SDUK CDL4U(E)MOV CTLG2.5(E)MOV SDB MOV for voltage surge spike MOV for voltage surge spike Suppressor Diode to fine protect CSCBHEME protection protection sensors, contacts, etc Dimensions & Weight Width 12 mm 6 mm 12 mm Length 55.5 mm 87.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 55.7 mm 66.0 mm 55.7 mm 35 x 15 mm 63.1 mm 74.0 mm 63.1 mm Weight per piece 19.2 g 14.8 g 18.0 g Technical Data/Ratings / Component Specifications Wire Size (solid / stranded) 22-10 AWG 22-10 AWG 22-10 AWG Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Nominal Current - 5 A - Peak Current 2kA-6.5kA (8/20ms) 2kA-6.5kA (8/20ms) - Nominal Discharge Current - 10 KA (8/20ms) 1.5 KA Response Time < 25 ns < 25 ns 1 ns (D.C) / 5 ns (A.C) Capacitance 100 - 20,000 pf 100 - 20,000 pf - Voltage Rating 30, 60, 75, 130, 275, 460, 510, Up to 275V 30, 60, 75, 130, 275, 460, 625, 680 V AC 510, 625, 680 V AC Installation Instructions Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CDL4U(E)MOV30V 20 CTLG2.5(E)MOV30V 20 DC - Anode CDL4U(E)MOV60V 20 CTLG2.5(E)MOV60V 20 CDL4U(E)SDUA12VDC 20 CDL4U(E)MOV75V 20 CTLG2.5(E)MOV75V 20 CDL4U(E)SDUA24VDC 20 CDL4U(E)MOV130V 20 CTLG2.5(E)MOV130V 20 CDL4U(E)SDUA48VDC 20 CDL4U(E)MOV275V 20 CTLG2.5(E)MOV275V 20 DC - Cathode CDL4U(E)MOV 460V 20 CDL4U(E)SDUK12VDC 20 CDL4U(E)MOV510V 20 CDL4U(E)SDUK24VDC 20 CDL4U(E)MOV625V 20 CDL4U(E)SDUK48VDC 20 CDL4U(E)MOV680V 20 AC CDL4U(E)SDB12VAC CDL4U(E)SDB24VAC CDL4U(E)SDB48VAC CDL4U(E)SDB160VAC Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCDL4U 50 EPCTLG2.5 50 EPCDL4U 50 Spacer CDL4USP 50 – – CDL4USP 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 47

ACCESSORIES JUMPER / SHORTING LINKS SCREW TERMINAL BLOCKS Internal Insulated External Current Shorting Sleeve Jumper Internal Jumper Jumper Bar & Screws Poles Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 2 Pole CA721/2 100 CA741/2 100 CA717/2 100 CA703/01 100 3 Pole CA721/3 100 CA741/3 100 CA717/3 100 CA704/01 100 C T S 2 . 5 U - N 4 Pole CA721/4 100 CA741/4 100 CA717/4 100 CA705/01 100 CA707/S/Q/01 100 10 Pole CA721/10 10 CA741/10 10 CA717/10 20 CA731/10 100 100 Pole CA721/100 10 CA741/100 10 - - CA731/100 10 2 Pole CA722/2 100 CA742/2 100 CA714/2 100 CA703/1 100 CTS4U-N, CCC4U, CMC1-2, 3 Pole CA722/3 100 CA742/3 100 CA714/3 100 CA704/1 100 CMC2-2, CDL4UN, CDL4U(I.S) 4 Pole CA722/4 100 CA742/4 100 CA714/4 100 CA705/1 100 CA707/S/Q/01 100 CDLG4, CDLG(I.S), CF4SP, 10 Pole CA722/10 10 CA742/10 10 CA714/10 20 CA732/10 100 CF4SP(L), CKT4U1, CKT4SP 100 Pole CA722/100 10 CA742/100 10 - - CA732/100 10 2 Pole CA723/2 100 CA743/2 100 CA710/2 100 CA703/2 100 C T S 6 U , C D S 6 U 3 Pole CA723/3 50 CA743/3 50 CA710/3 50 CA704/2 100 CA707/S/Q/1 100 C D T T U 1 , C D T T U - S H 1 4 Pole CA723/4 50 CA743/4 50 CA710/4 50 CA705/2 100 10 Pole CA723/10 10 CA743/10 10 CA710/10 20 CA733/10 10 2 Pole CA724/2 100 CA744/2 100 CA718/2 100 CA703/3 100 3 Pole CA724/3 50 CA744/3 50 CA718/3 50 CA704/3 100 CTS10U CA707/S/Q/1 100 4 Pole CA724/4 50 CA744/4 50 CA718/4 50 CA705/3 100 10 Pole CA724/10 10 CA744/10 10 CA718/10 20 CA734/10 10 2 Pole CA751/2 50 CA761/2 50 - - CA703/8 100 3 Pole CA751/3 50 CA761/3 50 - - CA704/8 100 CTS16U CA707/S/Q/1 100 4 Pole CA751/4 50 CA761/4 50 - - CA705/8 100 10 Pole CA751/10 10 CA761/10 10 - - CA739/10 10 2 Pole CA725/2 50 CA745/2 50 - - CA703/4 100 3 Pole CA725/3 20 CA745/3 20 - - CA704/4 100 CTS25UN CA707/S/Q/2 100 4 Pole CA725/4 20 CA745/4 20 - - CA705/4 100 10 Pole CA725/10 10 CA745/10 10 - - CA735/10 100 2 Pole CA771/2 50 CA781/2 50 - - CA703/10 100 3 Pole CA771/3 20 CA781/3 20 - - CA704/10 100 CTS35UN CA707/S/Q/2 100 4 Pole CA771/4 20 CA781/4 20 - - CA705/10 100 10 Pole CA771/10 10 CA781/10 10 - - CA770/10 10 2 Pole CA628/2 10 - - - - - - - - CTS50/70N 3 Pole CA628/3 10 - - - - - - 2 Pole CA629/2 10 - - - - - - - - CTS95/120N 3 Pole CA629/3 10 - - - - - - 2 Pole CA722/2 100 - - CA715/2 100 CA703/1 100 C T L 2 . 5 U , C T L 2 . 5 U ( L ) 3 Pole CA722/3 100 - - CA715/3 100 CA704/1 100 C T L 2 . 5 U - H , C T L 2 . 5 U - H ( L ) 4 Pole CA722/4 100 - - CA715/4 100 CA705/1 100 CA707/S/Q/01 100 C T L 2 . 5 U ( I . S ) 10 Pole CA722/10 10 - - CA715/10 20 CA732/10 100 100 Pole2 CA722/100 10 - - - - CA732/100 10 2 Pole CA727/2 100 CA747/2 100 CA714/2 100 CA703/1 100 ODL4U 3 Pole CA727/3 100 CA747/3 100 CA714/3 100 CA704/1 100 CDL4U(E) 4 Pole CA727/4 100 CA747/4 100 CA714/4 100 CA705/1 100 CA607/S/Q 100 CMT4 10 Pole CA727/10 10 CA747/10 10 CA714/10 20 CA732/10 100 CMB4 100 Pole2 CA727/100 10 CA747/100 10 - - CA732/100 10 2 Pole CA627/2 100 - - CA715/2 100 CA703/1 100 C D L G 2 . 5 3 Pole CA627/3 100 - - CA715/3 100 CA704/1 100 CA611/S/Q 100 C T L G 2 . 5 4 Pole CA627/4 100 - - CA715/4 100 CA705/1 100 10 Pole CA627/10 10 - - CA715/10 20 CA732/10 10 2 Pole - - - - CA711/2 100 - - - - C F 4 U 1 3 Pole - - - - CA711/3 50 - - C F 4 U ( L ) 1 4 Pole - - - - CA711/4 50 - - 10 Pole - - - - CA711/10 20 - - 2 Pole CA729/2 100 CA749/2 100 CA711/2 100 CA703/6 100 DDFL4U, DDFL4U(E) 3 Pole CA729/3 50 CA749/3 50 CA711/3 50 CA704/6 100 DDFL4ULR, DDFL4ULR(E) CA707/S/Q/3 100 4 Pole CA729/4 50 CA749/4 50 CA711/4 50 CA705/6 100 CSDL4U1, DDDL4U 10 Pole CA729/10 10 CA749/10 10 CA711/10 20 CA737/10 100 2 Pole - - - - CA716/2 50 - - - - CAFL4U1 3 Pole - - - - CA716/3 50 - - CAFL4U(L)1 4 Pole - - - - CA716/4 50 - - CAFL4U(N)1 10 Pole - - - - CA716/10 20 - - 2 Pole CA623/2 100 - - - - - - - - C H V 4 U 3 Pole CA623/3 100 - - - - - - C T S 4 U S C 4 Pole CA623/4 100 - - - - - - 10 Pole CA623/10 10 - - - - - - 2 Pole CA624/2 100 - - - - - - - - C H V 6 U 3 Pole CA624/3 100 - - - - - - C T S 6 U S C 4 Pole CA624/4 100 - - - - - - 10 Pole CA624/10 10 - - - 1 I n t e r n a l s h o-r t i n g s y s -te m n o t a v a i la b -le. 2 Pole CA625/2 100 - - - - - - - - C H V 1 0 U 3 Pole CA625/3 100 - - - 2 1 0 0 p o l e s t-ri p i s b r e a-k a b l e i n t o a n y -number of poles needed. CTS10USC 4 Pole CA625/4 100 - - - - - - 10 Pole CA625/10 10 - - - - - - 48 AAlltteecchh CCoorrpp..®®•• 3355 RRooyyaall RRooaadd •• FFlleemmiinnggttoonn,, NNJJ 0088882222--66000000 •• PPhhoonnee ((990088))880066--99440000 •• FFAAXX ((990088))880066--99449900

ACCESSORIES VARIOUS ACCESSORIES SCREW TERMINAL BLOCKS ENDPLATES PARTITION PLATES Terminal Block Cat. No. Dimensions Std. Pk. Terminal Block Cat. No. Dimensions Std. Pk. CTS2.5U-N, CTS4U-N CTS2.5U-N, CTS4U-N C T T 2 . 5 U K / J / T / E EP2.5/4UN 32 x 39 x 1.5mm 50 C T T 2 . 5 U K / J / T / E PP2.5/4UN 37 x 44 x 1.6mm 50 C C T S 6 U , C T S 1 0 U EP6/10U 31 x 42.5 x 1.5mm 50 C T S 6 U , C T S 1 0 U PP6/10U 37.5 x 56 x 1.5mm 50 C M C 1 - 2 EPCMC1-2 35.5 x 46.5 x 2.5mm 50 C T S 2 5 U N PP25UN 42.5 x 62 x 1mm 50 C M C 2 - 2 , C M C G 4 EPCMC2-2 40.5 x 65 x 2.5mm 50 C T S 3 5 U N PP35UN 50 x 64.5 x 1mm 50 C D L 4 U N , C D L G 4 EPCDL4UN 47.5 x 57 x 1.5mm 50 C M T 4 PPCMT4 32 x 37 x 1.6mm 50 C D L G 2 . 5 EPCDLG2.5 48 x 71.4 x 1.2mm 50 C T L G 2 . 5 EPCTLG2.5 62.5 x 87.5 x 1.2mm 50 EPODL4U (Front) 49 x 86 x 5.5mm 50 ODL4U EP1ODL4U (Back) 24 x 68 x 3mm 50 CHV Series, CTSUSC Series EPUSC 52 x 48.5 x 1.5mm 50 CTL2.5U Series EPCTL2.5U 55.5 x 84 x 1.5mm 50 CTL2.5U-H Series EPCTL2.5U-H 55.5 x 61 x 1.5mm 50 CAFL4U Series EPCAFL4U 32 x 72 x 1.5mm 50 SEPARATOR PLATES CDS6U EPCDS6U 37.2 x 82 x 1.5mm 50 CKT4U EPCKT4U 30.5 x 46.5 x 2.5mm 50 Terminal Block Cat. No. Dimensions Std. Pk. EPCKT4U EPCKT4U/4 65 x 38.3 x 1.5mm 50 CDTTU Series EPCDTTU 41 x 63 x 3mm 50 CTS2.5U-N, CTS4U-N CSDL4U EPCSFL4U 28 x 55.5 x 1.6mm 50 C T T 2 . 5 U K / J / T / E SP2.5/4UN 17.5 x 17.4 x 1.4mm 100 DDDL4U, DDFL4U EPDDFL4U 49 x 87.6 x 3mm 50 C T S 6 U , C T S 1 0 U , C T S 1 6 U SP6/10U 15.4 x 16.2 x 1.5mm 100 CDL4U(E) EPCDL4U 43 x 55 x 2.4mm 50 C S L 4 U N , C D L 4 U N ( I . S . ) SPCDL4U 15.4 x 16.2 x 1.6mm 100 CTC4U EPCTC4U 34.5 x 47 x 2.5mm 50 C B M 4 SPCMB4 14.5 x 12 x 1.5mm 100 CMT4 EPCMT4 23 x 27 x 1.5mm 50 C D L G 2 . 5 SPCDLG2.5 11 x 10.5 x 1 100 CMB4 EPCMB4 27 x 27 x 7mm 50 ODL2.5 Series EPODL2.5 49 x 59 x 4.6mm 50 EP1ODL2.5 23 x 59 x 2.5mm 50 END STOPS CA202 CA802 CA702 CA102 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA202 44.5 x 50 x 9.5mm 50 CA802 45 x 32 x 8mm 50 CA702 34 x 45 x 9mm 50 CA102 80 x 46 x 9mm 50 PROTECTIVE COVER CTSPC COVER SUPPORT PLATE Length Cat. No. Length Std. Pk. Cat. No. Std. Pk. CTSPC/40 40mm 2 CSP1 50 CTSPC/90 90mm 2 CTSPC/100 100mm 2 CTSPC/130 130mm 2 CTSPC/150 150mm 2 CTSPC/200 200mm 2 Assembled Block installed CTSPC/300 300mm 2 with Protective Cover CTSPC/330 330mm 2 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 49

OVERVIEW INTRODUCTION LUG TYPE TERMINALS LUG/ STUD TYPE CONNECTION TECHNOLOGY •Accepts Ring/ Fork Lug Cable Lugs •Secure connection •Withstands severe vibration •Hinged cover featuring captive nut system •Reliable Gas-tight connection guarantees quick and easy ring lug wiring •For very large wire sizes (up to 350 kcmil) •High Torque values E220514 60947-7-1 MATERIAL SPECIFICATIONS Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications Housing Corrosion free material • Polyamide PA66 Housing Upper Temperature Limit: 105°C Stud/ Bolt • Self-extinguishing Lower Temperature Limit: -50°C Nut • Bolt: zinc chromate • High mechanical strength Flammability UL94: V2/ V0 Current Bar passivated steel Volume Resistivity: 1012Ω cm • Nut/ Screw: zinc chromate Surface Resistivity: 1010Ω passivated steel • Current Bar: nickel plated copper alloy/ tin plated copper INSTALLATION GUIDELINES Secure Connection 1 Remove screw/ nut by using wrench/ hex nut driver 2 Place cable with ring/ fork cable lug on stud 3 Tighten screw/ nut to specified torque by using wrench/hex nut driver 1 2 3 RING LUG TERMINAL CONNECTION TYPES AND FEATURES Slotted Hex Nut Terminal Phillips Screw DiTsecsot nTneercmt in& als Terminal Large Center Hex Nut Marking Area Power Terminal Hinge Type Captive Nut Terminal Hex Nut Terminal 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

OVERVIEW SELECTION GUIDE STUD / RING LUG TERMINALS Phillips Slotted Ring Lug Barrier Terminal Blocks Screw Hex Nut FEATURES • CBS Series Phillips Screw ( ) • CSB Series Slotted Hex Nut ( ) • 22-4 AWG CBS Series CSB Series • Up to 85A page 52 page 53 Hex Slotted Ring Lug Stud Terminal Blocks Nut Hex Nut FEATURES • CSTSN Series Hex Nut ( ) • CSTSB Series Slotted Hex Nut ( ) • •22-2 AWG CSTSN Series CSTSB Series Up to 125A page 54 page 55 Ring Lug Hinge Terminal Blocks Captive Nut FEATURES • Captive Nut Built-In Hinge • Feed-Through Terminals • Disconnect Terminals Feed-Through Disconnect • 22-2 AWG • page 56 page 57 Up to 115A Ring Lug Power Terminal Blocks FEATURES • •Nut/Bolt Connection Nut/Bolt Connection Threaded Current Bar Threaded Current Bar • 10 AWG - 350 kcmil CBB Series • up to 310A page 58-59 High Current Power Terminal Blocks FEATURES • Captive Bolt System • 8-4/0 AWG • Up to 230A • PTB Series Protective Cover • Stackable page 60 Accessories page 61 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 51

CBS SERIES BARRIER RING LUG TERMINAL BLOCKS - PHILLIPS SCREW STUD / RING LUG TERMINALS CBS3U CBS4U CBS5U HIGHLIGHTS FEATURES • Various sizes 50 A Ring Lug Terminal 65 A Ring Lug Terminal 85 A Ring Lug Terminal • Wire size up to 4 AWG Dimensions & Weight Phillips Screw Head Phillips Screw Head Phillips Screw Head • • Current rating up to 85 A Width 9 mm 13 mm 13 mm Suitable for standard fork Length 49 mm 49 mm 49 mm type / ring lug connectors • Version with standard Height w DIN Rail 35 x 7.5 mm 38 mm 38 mm 38 mm Phillips Screw 35 x 15 mm 45.5 mm 45.5 mm 45.5 mm (CBS Series) • Weight per piece 7.4 g 12.4 g 13.8 g Version with slotted nut (CSB Series) Technical Data/Ratings • Approvals Compact design • 2, 3, 4 pole fork type and E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 ring lug jumpers Wire Size (solid / stranded) 22-8 AWG 0.5-6 mm2 16-6 AWG 1.5-10 mm2 16-4 AWG 1.5-16 mm2 APPLICATIONS Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC • Applications with vibration Current Rating 50 A 41 A 65 A 57 A 85 A 76 A • Machinery Torque 4.5 lb-in 0.5 Nm 10 lb-in 1.2 Nm 25 lb-in 2.0 Nm • Transportation • Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Vehicles • Provides solution when Installation Instructions •ring / fork lug is needed Wire Stripping Length – – – Compact / Space saving Screw / Stud Size M3 M4 M5 Panels Screwdriver Phillips #2 Phillips #2 Phillips #2 Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CBS3U 50 CBS4U 50 CBS5U 50 Red R CBS3U/R 50 CBS4U/R 50 CBS5U/R 50 Blue BU CBS3U/BU 50 CBS4U/BU 50 CBS5U/BU 50 Black BL CBS3U/BL 50 CBS4U/BL 50 CBS5U/BL 50 Orange O CBS3U/O 50 CBS4U/O 50 CBS5U/O 50 Green G CBS3U/G 50 CBS4U/G 50 CBS5U/G 50 Yellow Y CBS3U/Y 50 CBS4U/Y 50 CBS5U/Y 50 White W CBS3U/W 50 CBS4U/W 50 CBS5U /W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA802 50 CA802 50 CA802 50 Insulated 2 pole CA514/15-2 100 CA514/2-2 100 CA514/2-2 100 Jumper 3 pole CA514/15-3 50 CA514/2-3 50 CA514/2-3 50 Fork Type 4 pole CA514/15-4 50 CA514/2-4 50 CA514/2-4 50 Insulated 2 pole CA514/17-2 100 CA514/4-2 100 CA514/4-2 100 Jumper 3 pole CA514/17-3 50 CA514/4-3 50 CA514/4-3 50 Ring Lug 4 pole CA514/17-4 50 CA514/4-4 50 CA514/4-4 50 Internal Jumper 2 pole CA728/2 100 CA772/2 100 CA772/2 100 3 pole CA728/3 100 CA772/3 100 CA772/3 100 4 pole CA728/4 100 CA772/4 100 CA772/4 100 10 pole CA728/10 10 CA772/10 10 CA772/10 10 Protective Cover 2 Terminal – – CSTSPC2 10 CSTSPC2 10 3 Terminal CSTSPC2 10 CSTSPC2-1 10 CSTSPC2-1 10 4 Terminal CSTSPC2-1 10 – – – – 100 mm CSTSPC1-2 10 CSTSPC1-2 10 CSTSPC1-2 10 200 mm CSTSPC1-3 10 CSTSPC1-3 10 CSTSPC1-3 10 300 mm CSTSPC1-4 10 CSTSPC1-4 10 CSTSPC1-4 10 Marking Tag MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) 52 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CSB SERIES BARRIER RING LUG TERMINAL BLOCKS - SLOTTED NUT STUD / RING LUG TERMINALS CSB3/N3U CSB3/N3UL CSB4/N4U CSB5/N5U 50 A Ring Lug Terminal 50 A Ring Lug Terminal 65 A Ring Lug Terminal 85 A Ring Lug Terminal Dimensions & Weight Slotted Hex Nut Long Slotted Hex Nut Slotted Hex Nut Slotted Hex Nut Width 9 mm 9 mm 13 mm 13 mm Length 49 mm 49 mm 49 mm 49 mm Height w DIN Rail 35 x 7.5 mm 38 mm 38 mm 38 mm 38 mm 35 x 15 mm 45.5 mm 45.5 mm 45.5 mm 45.5 mm Weight per piece 10.2 g 11.7 g 19.0 g 19.0 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-8 AWG 0.5-6 mm2 22-8 AWG 0.5-6 mm2 16-6 AWG 1.5-10 mm2 16-4 AWG 1.5-16 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 50 A 41 A 50 A 41 A 65 A 57 A 85 A 76 A Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 10 lb-in 1.2 Nm 25 lb-in 2.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length – – – – Screw / Stud Size M3 M3 M4 M5 Screwdriver Hex Nut Driver 7 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CSB3/N3U 50 CSB3/N3UL 50 CSB4/N4U 50 CSB5/N5U 50 Red R CSB3/N3U/R 50 CSB3/N3UL/R 50 CSB4/N4U/R 50 CSB5/N5U/R 50 Blue BU CSB3/N3U/BU 50 CSB3/N3UL/BU 50 CSB4/N4U/BU 50 CSB5/N5U/BU 50 Black BL CSB3/N3U/BL 50 CSB3/N3UL/BL 50 CSB4/N4U/BL 50 CSB5/N5U/BL 50 Orange O CSB3/N3U/O 50 CSB3/N3UL/O 50 CSB4/N4U/O 50 CSB5/N5U/O 50 Green G CSB3/N3U/G 50 CSB3/N3UL/G 50 CSB4/N4U/G 50 CSB5/N5U/G 50 Yellow Y CSB3/N3U/Y 50 CSB3/N3UL/Y 50 CSB4/N4U/Y 50 CSB5/N5U/Y 50 White W CSB3/N3U/W 50 CSB3/N3UL/W 50 CSB4/N4U/W 50 CSB5/N5U /W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 EPCBS3U 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 2511160 10 End Stop CA802 50 CA802 50 CA802 50 CA802 50 Insulated 2 pole CA514/15-2 100 CA514/15-2 100 CA514/2-2 100 CA514/2-2 100 Jumper 3 pole CA514/15-3 50 CA514/15-3 50 CA514/2-3 50 CA514/2-3 50 Fork Type 4 pole CA514/15-4 50 CA514/15-4 50 CA514/2-4 50 CA514/2-4 50 Insulated 2 pole CA514/17-2 100 CA514/17-2 100 CA514/4-2 100 CA514/4-2 100 Jumper 3 pole CA514/17-3 50 CA514/17-3 50 CA514/4-3 50 CA514/4-3 50 Ring Lug 4 pole CA514/17-4 50 CA514/17-4 50 CA514/4-4 50 CA514/4-4 50 Internal Jumper 2 pole CA728/2 100 CA728/2 100 CA772/2 100 CA772/2 100 3 pole CA728/3 100 CA728/3 100 CA772/3 100 CA772/3 100 4 pole CA728/4 100 CA728/4 100 CA772/4 100 CA772/4 100 10 pole CA728/10 10 CA728/10 10 CA772/10 10 CA772/10 10 Protective Cover 2 Terminal – – – – CSTSPC2 10 CSTSPC2 10 3 Terminal CSTSPC2 10 CSTSPC2 10 CSTSPC2-1 10 CSTSPC2-1 10 4 Terminal CSTSPC2-1 10 CSTSPC2-1 10 – – – – 100 mm CSTSPC1-2 10 CSTSPC1-2 10 CSTSPC1-2 10 CSTSPC1-2 10 200 mm CSTSPC1-3 10 CSTSPC1-3 10 CSTSPC1-3 10 CSTSPC1-3 10 300 mm CSTSPC1-4 10 CSTSPC1-4 10 CSTSPC1-4 10 CSTSPC1-4 10 Marking Tag MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 53

CSTSN SERIES STUD TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS CSTSN4U CSTSN5U CSTSN6U HIGHLIGHTS FEATURES • Various sizes • 65 A Bolt Terminal 80 A Bolt Terminal 125 A Bolt Terminal •Wire size up to 2 AWG Dimensions & Weight M4 Hex Nut M5 Hex Nut M6 Hex Nut Current rating up to 125 A • Width 17 mm 17 mm 17 mm Suitable for standard fork •type / ring lug connectors Length 50 mm 50 mm 50 mm Version with standard Hex CSTSN Series Height w DIN Rail 35 x 7.5 mm 40.7 mm 40.7 mm 40.7 mm Nut ( ) • 35 x 15 mm 48.0 mm 48.0 mm 48.0 mm Version with slotted barrel CSTSB Series Weight per piece 21.5 g 23.4 g 30.4 g ( ) • Compact design Technical Data/Ratings • 2, 3, 4 pole fork type and Approvals ring lug jumpers CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-6 AWG 1.5-10 mm2 22-4 AWG 1.5-16 mm2 22-2 AWG 1.5-35 mm2 APPLICATIONS • Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Applications with vibration • Current Rating 65 A 57 A 80 A 76 A 125 A 125 A Machinery • Torque 14 lb-in 1.2 Nm 25 lb-in 2.0 Nm 25 lb-in 3.0 Nm Transportation • Vehicles Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 • Provides solution when Installation Instructions ring / fork lug is needed • Wire Stripping Length – – – Compact / Space saving Panels Screw / Stud Size M4 M5 M6 Screwdriver Hex Nut Driver 7 mm Hex Nut Driver 8 mm Hex Nut Driver 9 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CSTSN4U 100 CSTSN5U 100 CSTSN6U 100 Red R CSTSN4U/R 100 CSTSN5U/R 100 CSTSN6U/R 100 Blue BU CSTSN4U/BU 100 CSTSN5U/BU 100 CSTSN6U/BU 100 Black BL CSTSN4U/BL 100 CSTSN5U/BL 100 CSTSN6U/BL 100 Orange O CSTSN4U/O 100 CSTSN5U/O 100 CSTSN6U/O 100 Green G CSTSN4U/G 100 CSTSN5U/G 100 CSTSN6U/G 100 Yellow Y CSTSN4U/Y 100 CSTSN5U/Y 100 CSTSN6U/Y 100 White W CSTSN4U/W 100 CSTSN5U/W 100 CSTSN6U /W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCSTSU 50 EPCSTSU 50 EPCSTSU 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA802 50 CA802 50 CA802 50 Insulated 2 pole CA514/1-2 100 CA514/1-2 100 CA514/7-2 100 Jumper 3 pole CA514/1-3 50 CA514/1-3 50 CA514/7-3 50 Fork Type 4 pole CA514/1-4 50 CA514/1-4 50 CA514/7-4 50 Jumper 2 pole CA514/3-2 100 CA514/3-2 100 CA514/8-2 100 Ring Lug 3 pole CA514/3-3 50 CA514/3-3 50 CA514/8-3 50 4 pole CA514/3-4 50 CA514/3-4 50 CA514/8-4 50 Protective Cover 2 Terminal CSTSPC2 10 CSTSPC2 10 CSTSPC2 10 3 Terminal CSTSPC2-1 10 CSTSPC2-1 10 CSTSPC2-1 10 4 Terminal – – – – – – 100 mm CSTSPC1-2 10 CSTSPC1-2 10 CSTSPC1-2 10 200 mm CSTSPC1-3 10 CSTSPC1-3 10 CSTSPC1-3 10 300 mm CSTSPC1-4 10 CSTSPC1-4 10 CSTSPC1-4 10 Marking Tag MT2B4 1 Pk. (100 tags) MT2B4 1 Pk. (100 tags) MT2B4 1 Pk. (100 tags) 54 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CSTSB SERIES STUD TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS CSTSB4U CSTSB5U 65 A Bolt Terminal 65 A Bolt Terminal Dimensions & Weight Slotted Barrel Slotted Barrel Width 17 mm 17 mm Length 50 mm 50 mm Height w DIN Rail 35 x 7.5 mm 40.7 mm 40.7 mm 35 x 15 mm 48.0 mm 48.0 mm Weight per piece 24 g 25.5 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-6 AWG 1.5-10 mm2 22-4 AWG 1.5-16 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 65 A 57 A 80 A 76 A Torque 14 lb-in 1.2 Nm 25 lb-in 2.0 Nm Insulation Material Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length – – Screw / Stud Size M4 M5 Screwdriver Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CSTSB4U 100 CSTSB5U 100 Red R CSTSB4U/R 100 CSTSB5U/R 100 Blue BU CSTSB4U/BU 100 CSTSB5U/BU 100 Black BL CSTSB4U/BL 100 CSTSB5U/BL 100 Orange O CSTSB4U/O 100 CSTSB5U/O 100 Green G CSTSB4U/G 100 CSTSB5U/G 100 Yellow Y CSTSB4U/Y 100 CSTSB5U/Y 100 White W CSTSB4U/W 100 CSTSB5U/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCSTSU 50 EPCSTSU 50 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 End Stop CA802 50 CA802 50 Insulated 2 pole CA514/1-2 100 CA514/1-2 100 Jumper 3 pole CA514/1-3 50 CA514/1-3 50 Fork Type 4 pole CA514/1-4 50 CA514/1-4 50 Insulated 2 pole CA514/3-2 100 CA514/3-2 100 Jumper 3 pole CA514/3-3 50 CA514/3-3 50 Ring Lug 4 pole CA514/3-4 50 CA514/3-4 50 Protective Cover 2 Terminal CSTSPC2 10 CSTSPC2 10 3 Terminal CSTSPC2-1 10 CSTSPC2-1 10 4 Terminal – – – – 100 mm CSTSPC1-2 10 CSTSPC1-2 10 200 mm CSTSPC1-3 10 CSTSPC1-3 10 300 mm CSTSPC1-4 10 CSTSPC1-4 10 Marking Tag MT2B4 1 Pk. (100 tags) MT2B4 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 55

STH SERIES HINGE TYPE RING LUG TERMINAL BLOCKS STUD / RING LUG TERMINALS STH3 STH4 STH6 HIGHLIGHTS FEATURES Dimensions & Weight • Bolt Feed Through Width 9 mm 11 mm 18 mm Terminals • Length 47 mm 46 mm 64 mm Suitable for standard fork Height w DIN Rail 35 x 7.5 mm 47.3 mm 52.2 mm 63.1 mm type / ring lugs • 35 x 15 mm 54.8 mm 59.0 mm 70.6 mm Captive nut system • Only standard flat head Weight per piece 15.0 g 62.5 g 57.8 g screw driver needed to Technical Data/Ratings tighten connection • Approvals IP20 touch proof terminals CSCBHEME •with hinged plastic cover E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 2, 3, 4 pole fork type and Wire Size (solid / stranded) 22-8 AWG 1.5-6 mm2 22-8 AWG 1.5-6 mm2 22-2 AWG 1.5-35 mm2 ring lug jumpers Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC APPLICATIONS Current Rating 50 A 41 A 50 A 41 A 115 A 125 A • Torque 4.5 lb-in 0.5 Nm 14 lb-in 1.2 Nm 25 lb-in 3.0 Nm Applications with vibration • •Machinery Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Transportation • Installation Instructions Vehicles • Provides solution when Wire Stripping Length – – – ring / fork lug is needed Screw / Stud Size M3 M4 M6 Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) STH3 100 STH4 50 STH6 50 Red R STH3/R 100 STH4/R 50 STH6/R 50 Blue BU STH3/BU 100 STH4/BU 50 STH6/BU 50 Black BL STH3/BL 100 STH4/BL 50 STH6/BL 50 Orange O STH3/O 100 STH4/O 50 STH6/O 50 Green G STH3/G 100 STH4/G 50 STH6/G 50 Yellow Y STH3/Y 100 STH4/Y 50 STH6/Y 50 White W STH3/W 100 STH4/W 50 STH6/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPSTH3 50 EPSTH4 50 EPSTH6 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 2511160 10 2511160 10 2511160 10 End Stop CA702 100 CA702 100 CA702 100 CA802 50 CA802 50 CA802 50 CA202 50 CA202 50 CA202 50 Jumpers 2 pole CA512/15-2 100 CA512/13-2 100 – – Fork Type 3 pole CA512/15-3 50 CA512/13-3 50 – – 4 pole CA512/15-4 50 CA512/13-4 50 – – Insulated 2 pole CA514/15-2 100 CA514/13-2 100 – – Jumpers 3 pole CA514/15-3 50 CA514/13-3 50 – – Fork Type 4 pole CA514/15-4 50 CA514/13-4 50 – – Jumpers 2 pole CA512/17-2 100 CA512/14-2 100 – – Ring Lug 3 pole CA512/17-3 50 CA512/14-3 50 – – 4 pole CA512/17-4 50 CA512/14-4 50 – – Insulated 2 pole CA514/17-2 100 CA514/14-2 100 – – Jumpers 3 pole CA514/17-3 50 CA514/14-3 50 – – Ring Lug 4 pole CA514/17-4 50 CA514/14-4 50 – – Internal 2 pole CA773/2 100 – – CA774/2 100 Jumpers 3 pole CA773/3 50 – – CA774/3 50 4 pole CA773/4 50 – – CA774/4 50 10 pole CA773/10 10 – – – – Marking Tag MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT16 1 Pk. (100 tags) 56 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

STH SERIES HINGE TYPE DISCONNECT & TEST TERMINAL BLOCKS STUD / RING LUG TERMINALS STH4DT STH4DTSH STH4DTFT HIGHLIGHTS FEATURES • Bolt Disconnect Terminals • STH4DT Disconnect ( ) • Disconnect Terminal Block Double Disconnect Terminal Feed-Through Terminal Block 2 Shorted Disconnect Dimensions & Weight Hinge Type Block Disconnect Profile Terminals (STH4DTSH) • Width 11 mm 22 mm 11 mm Feed-Through with same STH4DTFT profile ( ) Length 86 mm 86 mm 86 mm • Suitable for standard fork Height w DIN Rail 35 x 7.5 mm 52.2 mm 52.2 mm 52.2 mm type / ring lugs • 35 x 15 mm 59.0 mm 59.0 mm 59.0 mm Captive nut system • Weight per piece 42.8 g 42.3 g 36.6 g IP20 touch proof terminals with hinged plastic cover Technical Data/Ratings • 2, 3, 4 pole fork type and Approvals ring lug jumpers CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 APPLICATIONS Wire Size (solid / stranded) 22-8 AWG 1.5-6 mm2 22-8 AWG 1.5-6 mm2 22-8 AWG 1.5-6 mm2 • Disconnect / Test Voltage Rating 600 V 1000V AC/DC 300 V 1000V AC/DC 600 V 1000V AC/DC Applications • Current Rating 35 A 41 A 25 A 34 A 50 A 41 A Measuring / Control Circuit • Torque 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Utility Instruments and Transformer Applications Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 • Meter Replacement • Installation Instructions External Current Wire Stripping Length – – – Measurement Screw / Stud Size M4 M4 M4 Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey STH4DT 50 STH4DTSH 24 STH4DTFT 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPSTH4DT 50 EPSTH4DT 50 EPSTH4DT 50 DIN Rail 2511120 20 2511120 20 2511120 20 Disconnect / CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 Test Application 2511160 10 2511160 10 2511160 10 for Metering CT End Stop CA702 100 CA702 100 CA702 100 STH4DT CA802 50 CA802 50 CA802 50 Disconnect CA202 50 CA202 50 CA202 50 Terminal Jumpers 2 pole CA512/13-2 100 CA512/13-2 100 CA512/13-2 100 LCSTH4DT Fork Type 3 pole CA512/13-3 50 CA512/13-3 50 CA512/13-3 50 Lockout Cap 4 pole CA512/13-4 50 CA512/13-4 50 CA512/13-4 50 Insulated 2 pole CA514/13-2 100 CA514/13-2 100 CA514/13-2 100 Jumpers 3 pole CA514/13-3 50 CA514/13-3 50 CA514/13-3 50 Fork Type 4 pole CA514/13-4 50 CA514/13-4 50 CA514/13-4 50 Jumpers 2 pole CA512/14-2 100 CA512/14-2 100 CA512/14-2 100 Ring Lug 3 pole CA512/14-3 50 CA512/14-3 50 CA512/14-3 50 4 pole CA512/14-4 50 CA512/14-4 50 CA512/14-4 50 Insulated 2 pole CA514/14-2 100 CA514/14-2 100 CA514/14-2 100 Jumpers 3 pole CA514/14-3 50 CA514/14-3 50 CA514/14-3 50 Ring Lug 4 pole CA514/14-4 50 CA514/14-4 50 CA514/14-4 50 QJ11/2 Shorting Plug Insulated 3 pole CA514/14-3A 10 CA514/14-3A 10 CA514/14-3A 10 Alternate 4 pole CA514/14-4A 10 CA514/14-4A 10 CA514/14-4A 10 CA514/14-3 Jumpers Shorting Plug QJ11/2 25 QJ11/2 25 – – Lock Out Cap LCSTH4DT 25 LCSTH4DT 25 – – Marking Tag MT10 1 Pk. (100 tags) MT10 1 Pk. (100 tags) MT10 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 57

CBB SERIES RING LUG POWER TERMINAL BLOCKS STUD / RING LUG TERMINALS CBB35/50 CBB70 CBB95 CBB35/50LS CBB70LS CBB95LS HIGHLIGHTS FEATURES • High Current up to 310A • Feed-Through Terminals • 150 A Feed Through 175 A Feed Through 230 A Feed Through •Nut / Bolt version Dimensions & Weight Power Terminal Power Terminal Power Terminal Version with threaded Width 32 mm 38 mm 38 mm current bar (LS) for fast wiring without 2 Length 75 mm 92 mm 92 mm wrenches • Height w DIN Rail 35 x 7.5 mm 47.5 mm 47.5 mm 47.5 mm Wire crimped into ring / 35 x 15 mm 54.5 mm 54.5 mm 54.5 mm fork lug on to the flat cur- Weight per piece 82.0 g 157.5 g 193.0 g rent bar • Special Mounting foot Technical Data/Ratings • design for tight fit on rail Approvals Protective Cover in vari- •ous length E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 10-1/0 AWG 6-50.0 mm2 8-2/0 AWG 6-70.0 mm2 8-4/0 AWG 16-95.0 mm2 2, 3 pole jumper bars Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC APPLICATIONS Current Rating 150 A 150 A 175 A 192 A 230 A 232 A • Torque 27 lb-in 3.0 Nm 54.5 lb-in 6.0 Nm 90 lb-in 10.0 Nm High Current Power • Applications Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Large size wires • Installation Instructions Power Distribution Feed- ing Applications Wire Stripping Length – – – • Provides solution when Screw / Stud Size M6 M8 M10 ring / fork lug is needed Screwdriver Wrench M6 Wrench M8 Wrench M10 Flat Head 1 x 5.5 mm Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey Nut & Bolt configuration CBB35/50 10 CBB70 10 CBB95 10 Threaded Current Bar CBB35/50LS 10 CBB70LS 10 CBB95LS 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Partition Plate PPCBB 50 PPCBB 50 PPCBB1 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA102 50 CA102 50 CA102 50 CA202 50 CA202 50 CA202 50 Protective Cover 70 mm CBBPC1/70 10 CBBPC1/70 10 – – for installing on 80 mm CBBPC1/80 10 CBBPC1/80 10 – – PPCBB & PPCBB1 100 mm CTSPC2-1 10 CTSPC2-1 10 CBBPC2/100 10 130 mm CBBPC1/130 10 CBBPC1/130 10 – – 160 mm CBBPC1/160 10 CBBPC1/160 10 CBBPC2/160 10 200 mm CBBPC1/200 10 CBBPC1/200 10 CBBPC2/200 10 250 mm CBBPC1/250 10 CBBPC1/250 10 CBBPC2/250 10 Permanent 2 pole CA790/2 10 CA791/2 10 CA791/2 10 Jumper Bars 3 pole CA790/3 10 CA791/3 10 CA791/3 10 Marking Tag MT12 1 Pk. (100 tags) MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) 58 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CBB SERIES RING LUG TYPE POWER TERMINAL BLOCKS STUD / RING LUG TERMINALS CBB120 CBB150 CBB185 CBB120LS CBB150LS CBB185LS 255 A Feed Through 285 A Feed Through 310 A Feed Through Dimensions & Weight Power Terminal Power Terminal Power Terminal Width 48 mm 48 mm 48 mm Length 100 mm 110 mm 110 mm Height w DIN Rail 35 x 7.5 mm 47.3 mm 47.3 mm 47.3 mm 35 x 15 mm 54.5 mm 54.5 mm 54.5 mm Weight per piece 244.0 g 316.0 g 319.4 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 8-250 KCMIL 16-120 mm2 8-300 KCMIL 16-150 mm2 8-350 KCMIL 16-185 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 255 A 269 A 285 A 309 A 310 A 353 A Torque 90 lb-in 10.0 Nm 127 lb-in 14.0 Nm 127 lb-in 14.0 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length – – – Screw / Stud Size M10 M12 M12 Screwdriver Wrench M10 Wrench M12 Wrench M12 Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Flat Head 1 x 1.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey Nut & Bolt configuration CBB120 10 CBB150 10 CBB185 10 Threaded Current Bar CBB120LS 10 CBB150LS 10 CBB185LS 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Partition Plate PPCBB1 50 PPCBB1 50 PPCBB1 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA102 50 CA102 50 CA102 50 CA202 50 CA202 50 CA202 50 Protective Cover 100 mm CBBPC2/100 10 CBBPC2/100 10 CBBPC2/100 10 for installing on 160 mm CBBPC2/160 10 CBBPC2/160 10 CBBPC2/160 10 PPCBB & PPCBB1 200 mm CBBPC2/200 10 CBBPC2/200 10 CBBPC2/200 10 250 mm CBBPC2/250 10 CBBPC2/250 10 CBBPC2/250 10 Permanent 2 pole CA793/2 10 CA794/2 10 CA794/2 10 Jumper Bars 3 pole CA793/3 10 CA794/3 10 CA794/3 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 59

PTB SERIES HIGH CURRENT POWER TERMINAL BLOCKS STUD / RING LUG TERMINALS PTB35/50 PTB70/95 PTB35/50SH PTB70/95SH HIGHLIGHTS PTB35/50SH PTB70/95SH FEATURES • Panel / DIN Rail mountable • High Current up to 230A • PTB35/50 PTB70/95 Finger safe protective cover Dimensions & Weight PSPTBXX ( ) • Width 25 mm 32 mm Modular / stackable design • 2, 3, 4 pole jumper system Length 113 / 169 mm 130 / 192 mm Height w DIN Rail 35 x 7.5 mm 61.0 / 66.5 mm 76.6 / 78.0 mm APPLICATIONS 35 x 15 mm 68.3 / 73.6 mm 84.5 / 86.0 mm • Weight per piece 112.0 / 130.5 g 174.4 / 198.2 g High Current Power Applications Technical Data/Ratings • •Large size wires Approvals Power Distribution Feeding CSCBHEME Applications E220514 60947-7-1 E220514 60947-7-1 • Wire Size (solid / stranded) 8-2 AWG 1.5-50 mm2 8-4/0 AWG 1.5-95 mm2 Provides solution when ring / fork lug is needed Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 115 A 150 A 230 A 232 A Torque 27 lb-in 3.0 Nm 87 lb-in 10.0 Nm Insulation Material Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length – – Screw / Stud Size M6 M8 Screwdriver Hex Nut Driver 10 mm Hex Nut Driver 13 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey PTB35/50 10 PTB70/95 10 PTB35/50SH 10 PTB70/95SH 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Protective Cover PSPTB35 20 PSPTB70 10 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 End Stop CA102 50 CA102 50 CA202 50 CA202 50 Jumper System 2 pole CA703/9 10 CA703/11 10 3 pole CA704/9 10 CA704/11 10 4 pole CA705/9 10 CA705/11 10 Marking Tag MT9 1 Pk. (100 tags) MT9 1 Pk. (100 tags) Marking Tag Holder MHPTB35 MHPTB35 Marking Tag Holder Protective Cover MHPTB35 PSPTB35 60 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES JUMPERS / SHORTING LINKS STUD / RING LUG TERMINALS Fork Type Insulated Fork Type Ring Lug Insulated Ring Lug Internal Alternate Jumper Jumper Jumper Jumper Jumper Jumper for STH4DT Series Terminal Block Series Poles Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CBS3U 2 Pole CA728/2 50 CA512/15-2 100 CA514/15-2 100 CA512/17-2 100 CA514/17-2 100 CSB3/N3U 3 Pole CA728/3 50 CA512/15-3 50 CA514/15-3 50 CA512/17-3 50 CA514/17-3 50 N/A CSB3/N3UL 4 Pole CA728/4 50 CA512/15-4 50 CA514/15-4 50 CA512/17-4 50 CA514/17-4 50 STH3 10 Pole CA728/10 10 CBS4U 2 Pole CA772/2 100 CA512/2-2 100 CA514/2-2 100 CA512/4-2 100 CA514/4-2 100 CBS5U 3 Pole CA772/3 50 CA512/2-3 50 CA514/2-3 50 CA512/4-3 50 CA514/4-3 50 N/A CSB4/N4UL 4 Pole CA772/4 50 CA512/2-4 50 CA514/2-4 50 CA512/4-4 50 CA514/4-4 50 CSB5/N5U 10 Pole CA772/10 10 CSTSN4U CSTSN5U 2 Pole CA512/1-2 100 CA514/1-2 100 CA512/3-2 100 CA514/3-2 100 CSTSN6U 3 Pole CA512/1-3 50 CA514/1-3 50 CA512/3-3 50 CA514/3-3 50 N/A N/A CSTSB4U 4 Pole CA512/1-4 50 CA514/1-4 50 CA512/3-4 50 CA514/3-4 50 CSTSB5U 2 Pole CA512/7-2 100 CA514/7-2 100 CA512/8-2 100 CA514/8-2 100 CSTSN6U 3 Pole CA512/7-3 50 CA514/7-3 50 CA512/8-3 50 CA514/8-3 50 N/A N/A 4 Pole CA512/7-4 50 CA514/7-4 50 CA512/8-4 50 CA514/8-4 50 STH4 2 Pole CA512/13-2 100 CA514/13-2 100 CA512/14-2 100 CA514/14-2 100 STH4DT 3 Pole CA512/13-3 50 CA514/13-3 50 CA512/14-3 50 CA514/14-3 50 N/A CA514/14-3A 10 STH4DTFT 4 Pole CA512/13-4 50 CA514/13-4 50 CA512/14-4 50 CA514/14-4 50 CA514/14-4A 10 2 Pole CA774/2 100 STH6 3 Pole N/A N/A N/A N/A CA774/3 50 4 Pole CA774/4 50 END STOPS CA802 CA707 CA202 Cat. No Dimensions Std. Pk. Cat. No Dimensions Std. Pk. Cat. No Dimensions Std. Pk. CA802 32 x 45 x 8 mm 50 CA702 34 x 45 x 9 mm 50 CA202 44.5 x 50 x 9.5 mm 50 ENDPLATES / PROTECTIVE COVERS For CBS, CSB, CSTS Series Terminal Block Cat. No Dimensions Std. Pk. Length Cat. No. Std. Pk. CBS Series 100mm CSTSPC1-2 10 EPCBS3U 26.2 x 49 x 1.5 mm 50 CSB Series 200mm CSTSPC1-3 10 CSTSN Series 300mm CSTSPC1-4 10 EPCSTSU 31 x 50 x 1.5 mm 50 CSTSB Series STH3 EPSTH3 34 x 47 x 1.5 mm 50 STH4 EPSTH4 39.5 x 46 x 1.5 mm 50 STH6 EPSTH6 51 x 63.5 x 1.5 mm 50 STH4DT EPSTH4DT 37.5 x 86 x 1.5 mm 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 61

OVERVIEW INTRODUCTION SPRING TERMINAL BLOCKS SPRING CLAMP TECHNOLOGY •Easy Installation •NO torque requirements •Versatile and Vibration Proof •Maintenance free •Reliable Gas-tight connection •Terminals accept wires with/ without ferrules •Fail proof, safe connection E220514 60947-7-1 MATERIAL SPECIFICATIONS 2 E Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications s Housing Corrosion free material • Polyamide PA66 Housing Upper Temperature Limit: 105°C F Spring • Self-extinguishing Lower Temperature Limit: -50°C Current Bar • Spring: Stainless Steel • High mechanical strength Flammability UL94: V2/ V0 • Current Bar: copper tin Volume Resistivity: 1012Ω cm plated Surface Resistivity: 1010Ω INSTALLATION GUIDELINES 1 2 3 Secure 1 Insert Flat-Head Screw Driver into insertion a b WATCH Connection space to open pre-loaded spring 2 (a) Insert Wire into opening in spring leg. (b) Remove screwdriver. 3 The spring force presses conductor against VIDEO the current bar for a reliable/safe connection CX SERIES FEATURES AND ADVANTAGES COMPACT DESIGN CX4 - MOST COMPACT IN THE INDUSTRY Knife Disconnect Fuse Terminal Push-In Jumper Technology Large Center Marking Area Partition Plate for Separation Unique Design for easy wire entry Side Entry Terminals 62 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

OVERVIEW SELECTION GUIDE SPRING TERMINAL BLOCKS CX Series FEATURES •Extremely Compact Design •CX4 is the most compact in the industry •Push-In technology jumper system Feed-Though Multi-Connection Ground/Earth • 2, 3, 4 5, 6, 7, 8, 10 pole • 2 independent jumper channels page 64-65 page 66-67 page 68-70 • Easy breakout of jumper pins for alternate shorting of terminal blocks • Felt tip pen marking option •Center marking tag area •Unique design in plastic housing for easy wire entry •Individually mountable partition plates provide electrical and visual separation Double Level Electronic Component Fuse •Test Plugs for Test & Measurement needs page 71 page 72 page 74 Component Carrier Disconnect Side Entry page 75 page 76 page 77 Pluggable Hybrid Distribution page 78 page 79 Angular Series FEATURES • 45 wire entry for easy installation • 2.5mm to 8mm terminal blocks (up to 50A) • Multi-Connection Terminals Feed-Through Multi-Connection Multi-Level Ground/Earth • 2, 3, 4 connection ground terminals page 80 page 81 page 82-83 page 84-85 Accessories Jumpers End Plates, Partitions, End Stops, Test Plugs page 86 page 87 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 63

CX SERIES FEED THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX2.5 CX4 CX6 HIGHLIGHTS FEATURES • Most compact in Industry • 2, 3, 4, 10 Pole Push-In Jumpers • 2 Jumper Channels for 2 Connection Feed-Through 2 Connection Feed-Through 2 Connection Feed-Through •multiple Jumper options Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels 3 and 4 Connection Terminals Width 5 mm 6 mm 8 mm • 3 Marking Locations • Length 49.7 mm 54.8 mm 62.1 mm Many Colors Height w DIN Rail 35 x 7.5 mm 38.0 mm 38.0 mm 43.0 mm 35 x 15 mm 45.5 mm 45.5 mm 50.5 mm APPLICATIONS • Weight per piece 6.2 g 9.8 g 14.0 g High Vibration •Environments Technical Data/Ratings Machines • Approvals Elevator Cabinets • Transport E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 24-12 AWG 0.2-2.5 mm2 24-10 AWG 0.2-4 mm2 24-8 AWG 0.2-6 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 20 A 24 A 30 A 32 A 50 A 41 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 14 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CX2.5 100 CX4 100 CX6 100 Red R CX2.5/R 100 CX4/R 100 CX6/R 100 Blue BU CX2.5/BU 100 CX4/BU 100 CX6/BU 100 Black BL CX2.5/BL 100 CX4/BL 100 CX6/BL 100 Orange O CX2.5/O 100 CX4/O 100 CX6/O 100 Green G CX2.5/G 100 CX4/G 100 CX6/G 100 Yellow Y CX2.5/Y 100 CX4/Y 100 CX6/Y 100 White W CX2.5/W 100 CX4/W 100 CX6/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 EPCX4 50 EPCX6 50 Partition Plate PPCX4 20 PPCX4 20 PPCX10 20 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX4/2 100 JX6/2 100 Jumpers 3 pole JX2.5/3 50 JX4/3 50 JX6/3 50 4 pole JX2.5/4 50 JX4/4 50 JX6/4 50 5 pole JX2.5/5 50 – – – – 6 pole JX2.5/6 10 – – – – 7 pole JX2.5/7 10 – – – – 8 pole JX2.5/8 10 JX4/8 50 – – 10 pole JX2.5/10 10 JX4/10 10 JX6/10 10 16 pole – – JX4/16 10 – – Test Plug TX2.5 50 TX4 50 TX6 50 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) Warning Label WLX2.5 1 Pk. (100 tags) WLX4 1 Pk. (100 tags) WLX6 1 Pk. (100 tags) 64 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES FEED-THROUGH/MULTI-CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX10 CSC16T CX2.5/3 CX2.5/4 2 Connection Feed-Through 2 Connection Feed-Through 3 Connection Feed-Through 4 Connection Feed-Through Dimensions 2 Jump Channels 2 Jump Channels 2 Jump Channels 2 Jumper Channels Width 10 mm 12 mm 5 mm 5 mm Length 71.7 mm 82.0 mm 62.2 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 51.6 mm 38.0 mm 38.0 mm 35 x 15 mm 57.0 mm 59.0 mm 45.5 mm 45.5 mm Weight per piece 22.4 g 39 g 7.6 g 9.4 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-6 AWG 0.2-10 mm2 16-4 AWG 1.5-16 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 800V AC/DC 600 V 1000 V AC/DC 600 V 1000V AC/DC Current Rating 65 A 57 A 85 A 76 A 20 A 24 A 20 A 24 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 18 mm 20 mm 10 mm 10 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CX10 50 CSC16T 50 CX2.5/3 100 CX2.5/4 50 Red R CX10/R 50 CSC16T/R 50 CX2.5/3/R 100 CX2.5/4/R 50 Blue BU CX10/BU 50 CSC16T/BU 50 CX2.5/3/BU 100 CX2.5/4/BU 50 Black BL CX10/BL 50 CSC16T/BL 50 CX2.53/BL 100 CX2.5/4/BL 50 Orange O CX10/O 50 CSC16T/O 50 CX2.5/3/O 100 CX2.5/4/O 50 Green G CX10/G 50 CSC16T/G 50 CX2.5/3/G 100 CX2.5/4/G 50 Yellow Y CX10/Y 50 CSC16T/Y 50 CX2.5/3/Y 100 CX2.5/4/Y 50 White W CX10/W 50 CSC16T/W 50 CX2.53/W 100 CX2.5/4/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX10 20 EPCSC16T 50 EPCX2.5/3 50 EPCX2.5/4 20 Partition Plate PPCX10 20 – – PPCX4/3 20 PPCX4/4 20 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX10/2 20 CA801/5 100 JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole – – – – JX2.5/3 50 JX2.5/3 50 4 pole – – – – JX2.5/4 50 JX2.5/4 50 5 pole – – – – JX2.5/5 50 JX2.5/5 50 6 pole – – – – JX2.5/6 10 JX2.5/6 10 7 pole – – – – JX2.5/7 10 JX2.5/7 10 8 pole – – – – JX2.5/8 10 JX2.5/8 10 10 pole – – – – JX2.5/10 10 JX2.5/10 10 16 pole – – – – – – – – Test Plug TX10 50 – – TX2.5 50 TX2.5 50 Marking Tag MT10 1 Pk. (100 tags) – – MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) Warning Label WLX10 100 WLX2.5 100 WLX2.5 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 65

CX SERIES MULTIPLE CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX4/3 CX4/4 CX6/3 CX10/3 3 Connection Feed-Through 4 Connection Feed-Through 3 Connection Feed-Through 4 Connection Feed-Through Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels Width 6 mm 6 mm 8 mm 10 mm Length 70.5 mm 86.2 mm 82.2 mm 97.0 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 38.0 mm 43.0 mm 49.5 mm 35 x 15 mm 45.5 mm 45.5 mm 50.5 mm 57.0 mm Weight per piece 10.8 g 13.6 g 19.8 g 35.0 g Technical Data/Ratings Approvals UL IEC E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4.0 mm2 24-8 AWG 0.2-6 mm2 24-6 AWG 0.2-10 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 30 A 32 A 30 A 32 A 50 A 41 A 65 A 57 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 14 mm 18 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CX4/3 50 CX4/4 50 CX6/3 50 CX10/3 50 Red R CX4/3/R 50 CX4/4/R 50 CX6/3/R 50 CX10/3/R 50 Blue BU CX4/3/BU 50 CX4/4/BU 50 CX6/3/BU 50 CX10/3/BU 50 Black BL CX4/3/BL 50 CX4/4BL 50 CX6/3/BL 50 CX10/3BL 50 Orange O CX4/3/O 50 CX4/4/O 50 CX6/3/O 50 CX10/3/O 50 Green G CX4/3/G 50 CX4/4/G 50 CX6/3/G 50 CX10/3/G 50 Yellow Y CX4/3/Y 50 CX4/4/Y 50 CX6/3/Y 50 CX10/3/Y 50 White W CX4/3/W 50 CX4/4/W 50 CX6/3/W 50 CX10/3/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX4/3 20 EPCX4/4 20 EPCX6/3 20 EPCX10/3 20 Partition Plate PPCX4/3 20 PPCX4/4 20 – – – – DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX4/2 100 JX4/2 100 JX6/2 100 JX10/2 20 Jumpers 3 pole JX4/3 50 JX4/3 50 JX6/3 50 – – 4 pole JX4/4 50 JX4/4 50 JX6/4 50 – – 5 pole – – – – – – – – 6 pole – – – – – – – – 7 pole – – – – – – – – 8 pole JX4/8 50 JX4/8 50 – – – – 10 pole JX4/10 10 JX4/10 10 JX6/10 10 – – 16 pole JX4/16 10 JX4/16 10 – – – – Test Plug TX4 50 TX4 50 TX6 50 TX10 50 Marking Tag MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT10 1 Pk. (100 tags) Warning Label WLX4 1 Pk. (100 tags) WLX4 1 Pk. (100 tags) WLX6 1 Pk. (100 tags) WLX10 1 Pk. (100 tags) 66 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES MULTIPLE CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX2.5/4P CX2.5/4(E)D1 Double potential Terminal Block. 2 4 connection spring Terminal Block. different voltage potentials. With built in Diode (1N4007) for 2 Jumper Channels on one side reverse polarity protection to allow Dimensions current only to flow in one direction Width 5 mm 5 mm Length 74.7 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 38.0 mm 35 x 15 mm 45.5 mm 45.5 mm Weight per piece 9.6 g 9.4 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating - - - - Insulation Material Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CX2.5/4P 50 CX2.5/4(E)D1 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5/4 20 EPCX2.5/4 20 Partition Plate PPCX4/4 20 PPCX4/4 20 DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA802 50 CA802 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX2.5/4 50 5 pole JX2.5/5 50 JX2.5/5 50 6 pole JX2.5/6 10 JX2.5/6 10 7 pole JX2.5/7 10 JX2.5/7 10 8 pole JX2.5/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX2.5/10 10 16 pole – – – – Test Plug TX2.5 50 TX2.5 50 Marking Tag MT5 100 MT5 100 Warning Label WLX2.5 100 WLX2.5 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 67

CX SERIES GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG2.5 CXG4 CXG6 HIGHLIGHTS FEATURES • 2, 3, 4 Connection Ground Terminals • Yellow / Green Color as per Industry Standard • Snap-On feet 2 Connection Ground Terminal 2 Connection Ground Terminal 2 Connection Ground Terminal • 3 Marking Locations Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels Width 5 mm 6 mm 8 mm APPLICATIONS • Length 49.7 mm 54.8 mm 62.1 mm Grounding Applications Height w DIN Rail 35 x 7.5 mm 38.0 mm 38.0 mm 43.0 mm 35 x 15 mm 45.5 mm 45.5 mm 50.5 mm Weight per piece 8.4 g 11.0 g 20.2 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-10 AWG 0.2-4 mm2 24-8 AWG 0.2-6 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 14 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow / Green CXG2.5 100 CXG4 100 CXG6 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 EPCX4 50 EPCX6 50 Partition Plate PPCX4 20 PPCX4 20 PPCX10 20 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX4/2 100 JX6/2 100 Jumpers 3 pole JX2.5/3 50 JX4/3 50 JX6/3 50 4 pole JX2.5/4 50 JX4/4 50 JX6/4 50 5 pole JX2.5/5 50 – – – – 6 pole JX2.5/6 10 – – – – 7 pole JX2.5/7 10 – – – – 8 pole JX2.5/8 10 JX4/8 50 – – 10 pole JX2.5/10 10 JX4/10 10 JX6/10 10 16 pole – – JX4/16 10 – – Test Plug TX2.5 50 TX4 50 TX6 50 Marking Tag MT5 100 MT6 100 MT8 100 Warning Label WLX2.5 50 WLX4 100 WLX6 100 68 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG10 CXG2.5/3 CXG2.5/4 CXG4/3 2 Connection Ground Terminal 3 Connection Ground Terminal 4 Connection Ground Terminal 3 Connection Ground Terminal Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels Width 10 mm 5 mm 5 mm 6 mm Length 62.1 mm 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 43.0 mm 38.0 mm 38.0 mm 38.0 mm 35 x 15 mm 50.5 mm 45.5 mm 45.5 mm 45.5 mm Weight per piece 29.4 g 10.2 g 12.4 g 14.0 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-6 AWG 0.2-10 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 18 mm 10 mm 10 mm 10 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow / Green CXG10 50 CXG2.5/3 100 CXG2.5/4 50 CXG4/3 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX10 20 EPCX2.5/3 50 EPCX2.5/4 20 EPCX4/3 20 Partition Plate PPCX10 20 PPCX4/3 20 PPCX4/4 20 PPCX4/3 20 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 10 CA701-15/S 10 CA701-15/S 10 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX10/2 20 JX2.5/2 100 JX4/2 100 JX6/2 100 Jumpers 3 pole – – JX2.5/3 50 JX4/3 50 JX6/3 50 4 pole – – JX2.5/4 50 JX4/4 50 JX6/4 50 5 pole – – JX2.5/5 50 – – – – 6 pole – – JX2.5/6 10 – – – – 7 pole – – JX2.5/7 10 – – – – 8 pole – – JX2.5/8 10 JX4/8 50 – – 10 pole – – JX2.5/10 10 JX4/10 10 JX6/10 10 16 pole – – – – JX4/16 10 – – Test Plug TX10 50 TX2.5 50 TX2.5 50 TX4 50 Marking Tag MT10 100 MT5 100 MT5 100 MT6 100 Warning Label WLX10 100 WLX2.5 100 WLX2.5 100 WLX4 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 69

CX SERIES MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG4/4 CXG6/3 CXG10/3 4 Connection Ground Terminal 3 Connection Ground Terminal 3 Connection Ground Terminal Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels Width 6 mm 8 mm 10 mm Length 86.2 mm 82.2 mm 82.2 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 43.0 mm 43.0 mm 35 x 15 mm 45.5 mm 50.5 mm 50.5 mm Weight per piece 17.2 g 26.0 g 35.0 g Technical Data/Ratings Approvals UL E220514 60947-7-1 E220514 60947-7-1 60947-7-1 Wire Size (solid | stranded) 24-10 AWG 0.2-4 mm2 24-8 AWG 0.2-6 mm2 24-6 AWG 0.2-10 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating – – – – – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 18 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow / Green CXG4/4 50 CXG6/3 50 CXG10/3 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX4/4 20 EPCX6/3 20 EPCX10/3 20 Partition Plate PPCX4/4 20 – – – – DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX4/2 100 JX6/2 100 JX10/2 20 Jumpers 3 pole JX4/3 50 JX6/3 50 – – 4 pole JX4/4 50 JX6/4 50 – – 5 pole – – – – – – 6 pole – – – – – – 7 pole – – – – – – 8 pole JX4/8 50 – – – – 10 pole JX4/10 10 JX6/10 10 – – 16 pole JX4/16 10 – – – – Test Plug TX4 50 TX6 50 TX10 50 Marking Tag MT6 100 MT8 100 MT10 100 Warning Label WLX4 100 WLX6 100 WLX10 100 70 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES DOUBLE LEVEL TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXDL2.5 CXDL2.5(I.S) CXDLG2.5 CXDLG2.5(I.S) Double Level Terminal Double Level Terminal Internally Top Level Feed-Through 4 Connection Ground Terminal Dimensions Jumpers / Marking on both levels Shorted Bottom Level Grounding Circuit Width 5 mm 5 mm 5 mm 5 mm Length 71 mm 71 mm 71 mm 71 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 49.5 mm 49.5 mm 49.5 mm 35 x 15 mm 57 mm 57 mm 57 mm 57 mm Weight per piece 10.4 g 11.0 g 13.2 g 13.8 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 20 A 24 A 20 A 24 A 20 A (Top Level) 24 A (Top Level) - - Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXDL2.5 50 CXDL2.5(I.S) 50 CXDLG2.5 50 CXDLG2.5(I.S) 50 Red R CXDL2.5/R 50 CXDL2.5(I.S)/R 50 Yellow / Green Yellow / Green Blue BU CXDL2.5/BU 50 CXDL2.5(I.S)/BU 50 Black BL CXDL2.5BL 50 CXDL2.5(I.S)/BL 50 Orange O CXDL2.5/O 50 CXDL2.5(I.S)/O 50 Green G CXDL2.5/G 50 CXDL2.5(I.S)/G 50 Yellow Y CXDL2.5/Y 50 CXDL2.5(I.S)/Y 50 White W CXDL2.5/W 50 CXDL2.5(I.S)/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 Partition Plate – – – – – – – – DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 5 pole JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 6 pole JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 7 pole JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 8 pole JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 16 pole – – – – – – – – Test Plug TX2.5 50 TX2.5 50 TX2.5 50 TX2.5 50 Marking Tag MT5 100 MT5 100 MT5 100 MT5 100 Warning Label WLX2.5 100 WLX2.5 100 WLX2.5 100 WLX2.5 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 71

CX SERIES TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS SPRING TERMINAL BLOCKS CXDL2.5(E)D1 CXDL2.5(E)D2 CXDL2.5(E)D3 HIGHLIGHTS FEATURES • Various configurations of Electronic Components soldered into CXDL2.5 double level Terminal Block • Various Diode/ Resistor combinations • Various Indicator options • 4 Connection points for convenient wiring Arc Suppression Circuit Diode Arc Suppression Circuit Diode Reverse Polarity Protection Dimensions Diode APPLICATIONS Width 5 mm 5 mm 5 mm • •Reverse polarity protection Length 72.7 mm 72.7 mm 72.7 mm Lamp Testing • Height w DIN Rail 35 x 7.5 mm 49.5 mm 49.5 mm 49.5 mm AC/ DC voltage Indication 35 x 15 mm 57.0 mm 57.0 mm 57.0 mm Weight per piece 10.6 g 10.6 g 10.6 g Technical Data/Ratings Approvals E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating - - - - 20 A (Top Level) 24 A (Top Level) Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage - - - Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXDL2.5(E)D1 50 CXDL2.5(E)D2 50 CXDL2.5(E)D3 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 5 pole JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 6 pole JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 7 pole JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 8 pole JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 16 pole – – – – – – Marking Tag MT5 100 MT5 100 MT5 100 72 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS SPRING TERMINAL BLOCKS CXDL2.5(E)DD1/DD2 CXDL2.5(E)DD3/DD4 CXDL2.5(E)LD1 CXDL2.5(E)TS1 DD1 DD3 Diode Circuit for lamp testing Diode Circuit for lamp testing Voltage Indicator PT100 Temperature Sensor Dimensions DD2 DD4 Width 5 mm 5 mm 5 mm 5 mm Length 72.7 mm 72.7 mm 72.7 mm 72.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 49.5 mm 49.5 mm 49.5 mm 35 x 15 mm 57.0 mm 57.0 mm 57.0 mm 57.0 mm Weight per piece 10.6 g 10.6 g 10.6 g 12.2 g Technical Data/Ratings Approvals UL E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating - - - - - - - - Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Electronic Component Specifications Diode Type 1N 4007 1N 4007 1N 4007 1N 4007 Diode Reverse Voltage / Current 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A 1000 V / 1 A Indicator Voltage - - 6-60V / 110-240V - Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXDL2.5(E)DD1 50 CXDL2.5(E)DD3 50 CXDL2.5(E)LD1/6-60V 50 CXDL2.5(E)TS1 50 CXDL2.5(E)DD2 50 CXDL2.5(E)DD4 50 CXDL2.5(E)LD1/110-240V 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 EPCXDL2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 JX2.5/4 50 5 pole JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 JX2.5/5 50 6 pole JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 JX2.5/6 10 7 pole JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 JX2.5/7 10 8 pole JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 JX2.5/10 10 16 pole – – – – – – – – Marking Tag MT5 100 MT5 100 MT5 100 MT5 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 73

CX SERIES FUSE TERMINAL BLOCKS 5 x 20 mm SPRING TERMINAL BLOCKS CXF4 CXF4(L)6-60V CXF4(L)110-240V HIGHLIGHTS FEATURES • CXF4 Series accepts 5x20mm / 5x25mm fuse •types 27KΩ 220KΩ Completely enclosed, no Dimensions endplates • Version with LED for blown Width 6 mm 6 mm 6 mm fuse indication • Length 65.4 mm 65.4 mm 65.4 mm AC and DC compatible • •Large marking area Height w DIN Rail 35 x 7.5 mm 61.3 mm 61.3 mm 61.3 mm No polarity required 35 x 15 mm 68.8 mm 68.8 mm 68.8 mm Weight per piece 16 g 16 g 16 g APPLICATIONS Technical Data/Ratings • Control systems with fuse Approvals protection CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 10 A 10 A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Fuse Specifications Fuse Type 5x20 mm 5x20 mm 5x20 mm LED Indicator Voltage – – 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXF4 50 CXF4(L)6-60V 50 CXF(L)110-240V 50 Blue BU CXF4/BU 50 CXF4(L)6-60V/BU 50 CXF4(L)110-240V/BU 50 Black BL CXF4/BL 50 CXF4(L)6-60V/BL 50 CXF4(L)110-240V/BL 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 251–1120 20– 251–1120 20– 251–1120 20– CA701-15/S 10 CA701-15/S 10 CA701-15/S 10 Shorting Link/ 2 pole JX4/2 100 JX4/2 100 JX4/2 100 Jumpers 3 pole JX4/3 50 JX4/3 50 JX4/3 50 4 pole JX4/4 50 JX4/4 50 JX4/4 50 8 pole JX4/8 50 JX4/8 50 JX4/8 50 10 pole JX4/10 10 JX4/10 10 JX4/10 10 16 pole JX4/16 10 JX4/16 10 JX4/16 10 Test Plug TX4 50 TX4 50 TX4 50 Marking Tag MT6 100 MT6 100 MT6 100 Warning Label WLX4 100 WLX4 100 WLX4 100 Fuses Ø5mm Current Slow Blow Fast Blow Current Slow Blow Fast Blow (0.2 in.) 5 x 20 mm Rating Cat. No Cat. No Rat ing Cat. No Cat. No 0.1A 0.1M5x20T 0.1M5x20F 4.0A 4.0M5x20T 4.0M5x20F 00..25AA 00..25MM55xx2200TT 00..25MM55xx2200FF 56..03AA 56..03MM55xx2200TT 56..03MM55xx2200FF 20mm(0.79 in.) 1.0A 1.0M5x20T 1.0M5x20F 8.0A 8.0M5x20T 8.0M5x20F 2.0A 2.0M5x20T 2.0M5x20F 10.0A 10.0M5x20T 10.0M5x20F 74 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES COMPONENT CARRIER TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXCC4 CPD1 CPF CPF(L) 27KΩ Dimensions Width 6 mm 6 mm 6 mm 6 mm Length 65.4 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm 61.3 mm 35 x 15 mm 68.8 mm Weight per piece 10.2 g 3.8 g 3.8 g 4.2 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating * * 1 A 1 A 10 A 10 A 10 A 10 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Carrier Specifications Component Type Component carrier base Plug module with diode Plug module for 5x20 mm fuse Plug module for 5x20 mm fuse Diode Type IN4007 with LED indicator LED Indicator Voltage – – – 6-60V AC/DC 110-240V AC/DC Installation Instructions Wire Stripping Length 10 mm – – – Screwdriver Flat Head 0.6 x 3.5 mm – – – Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXCC4 50 CPD1 50 CPF 50 CPF(L)6-60V 50 CPF(L)110-240V 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 – – – – – – CA701-15/S 10 – – – – – – End Stop CA702 50 – – – – – – CA802 50 – – – – – – CA103 50 – – – – – – Shorting Link/ 2 pole JX4/2 100 – – – – – – Jumpers 3 pole JX4/3 50 – – – – – – 4 pole JX4/4 50 – – – – – – 8 pole JX4/8 50 – – – – – – 10 pole JX4/10 10 – – – – – – 16 pole JX4/16 10 – – – – – – Test Plug TX4 50 – – – – – – Marking Tag MT6 100 MT6 100 MT6 100 MT6 100 Warning Label SWL4 50 – – – – – – * Current rating is based on plug used. Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 75

CX SERIES DISCONNECT & TEST TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXK2.5 CXK2.5/4 CXK4 2 Connection Disconnect 4 Connection Disconnect 2 Connection Disconnect Dimensions 2 Jumper Channels 2 Jumper Channels 2 Jumper Channels Width 5 mm 5 mm 6 mm Length 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 38 mm 38 mm 38 mm 35 x 15 mm 45.5 mm 45.5 mm 45.5 mm Weight per piece 8.65 g 11.9 g 11.2 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid | stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 16A 20A 16A 20A 22A 22A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXK2.5 50 CXK2.5/4 50 CXK4 50 Red R CXK2.5/R 50 CXK2.5/4/R 50 CXK4/R 50 Blue BU CXK2.5/BU 50 CXK2.5/4/BU 50 CXK4/BU 50 Black BL CXK2.5/BL 50 CXK2.5/4/BL 50 CXK4/BL 50 Orange O CXK2.5/O 50 CXK2.5/4/O 50 CXK4/O 50 Green G CXK2.5/G 50 CXK2.5/4/G 50 CXK4/G 50 Yellow Y CXK2.5/Y 50 CXK2.5/4/Y 50 CXK4/Y 50 White W CXK2.5/W 50 CXK2.5/4/W 50 CXK4/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5/3 50 EPCX2.5/4 50 – – Partition Plate PPCX4/3 20 PPCX4/4 20 PPCX4/3 20 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 10 CA701-15/S 10 CA701-15/S 10 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX2.5/2 100 JX4/2 100 Jumpers 3 pole JX2.5/3 50 JX2.5/3 50 JX4/3 50 4 pole JX2.5/4 50 JX2.5/4 50 JX4/4 50 5 pole JX2.5/5 50 JX2.5/5 50 – – 6 pole JX2.5/6 10 JX2.5/6 10 – – 7 pole JX2.5/7 10 JX2.5/7 10 – – 8 pole JX2.5/8 10 JX2.5/8 10 JX4/8 10 10 pole JX2.5/10 10 JX2.5/10 10 JX4/10 10 16 pole – – – – JX4/16 10 Test Plug TX2.5 50 TX2.5 50 TX4 50 Marking Tag MT5 100 MT5 100 MT6 100 Warning Label WLX2.5 100 WLX2.5 100 WLX4 100 76 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX SERIES SIDE ENTRY FEED THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXS2.5 CXS4 CXSG2.5, CXSG4 HIGHLIGHTS FEATURES • Side Entry Spring Terminals • Compact Design • 5 mm Side Entry 6 mm Side Entry 5 / 6 mm Side Entry Same Jumpers as Dimensions Feed Through Feed Through Ground Terminal •regular CX Series 5mm and 6mm Feed Width 5 mm 6 mm 5 / 6 mm Through Terminal • 2 Connection Ground Length 43 mm 43 mm 43 mm Blocks • Height w DIN Rail 35 x 7.5 mm 43.5 mm 43.5 mm 43.5 mm Low Height requirements 35 x 15 mm 51 mm 51 mm 51 mm Weight per piece 5.4 g g 8.4 g APPLICATIONS • Technical Data/Ratings Flat Cabinets • Approvals Same wire entry as regular screw terminals CSCBHEME E220514 60947-7-1 UL 60947-7-1 E220514 60947-7-1 Wire Size CXS2.5 24-12 AWG 0.2-2.5 mm2 - - 24-12 AWG 0.2-2.5 mm2 CXS4 - - 24-10 AWG 0.2-4 mm2 24-10 AWG 0.2-4 mm2 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 600 V 1000V AC/DC Current Rating 20A 24A 30A 32A – – Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 9 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXS2.5 50 CXS4 50 CXSG2.5 50 Red R CXS2.5/R 50 CXS4/R 50 CXSG4 50 Blue BU CXS2.5/BU 50 CXS4/BU 50 Yellow / Green Black BL CXS2.5/BL 50 CXS4/BL 50 Orange O CXS2.5/O 50 CXS4/O 50 Green G CXS2.5/G 50 CXS4/G 50 Yellow Y CXS2.5/Y 50 CXS4/Y 50 White W CXS2.5/W 50 CXS4/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCXS2.5 50 EPCXS2.5 50 EPCXS2.5 50 EPCXS2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 JX4/2 100 JX2.5/2 100 Jumpers 3 pole JX2.5/3 50 JX4/3 50 JX2.5/3 50 4 pole JX2.5/4 50 JX4/4 50 JX2.5/4 50 5 pole JX2.5/5 50 – – JX2.5/5 50 6 pole JX2.5/6 10 – – JX2.5/6 10 7 pole JX2.5/7 10 – – JX2.5/7 10 8 pole JX2.5/8 10 JX4/8 10 JX2.5/8 10 10 pole JX2.5/10 10 JX4/10 10 JX2.5/10 10 16 pole – – JX4/16 10 – – Test Plug TX2.5 50 – – – – Marking Tag MT5 100 MT5 100 MT5 100 Warning Label WLX2.5 100 WLX2.5 100 WL2.5 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 77

CX-PLUGGABLE PLUGGABLE FEED-THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX2.5/1B CX2.5PN CX2.5SN HIGHLIGHTS FEATURES • Pluggable Terminal Blocks • Pluggable Wire to DIN Rail connection CX2.5/1B-CX2.5PN ( ) • Pluggable Wire to Wire Dimensions & Weight DIN Rail Base Stackable Terminal Plug Stackable Terminal Socket Connection CX2.5SN CX2.5PN ( - ) Width 5 mm 5 mm 5 mm • Easy Clip multi-wire Length 50.8 mm 17.5 mm 18 mm solution • Height w DIN Rail 35 x 7.5 mm 38.2 mm 42.0 mm 40.0 mm Polarizing plug with 35 x 15 mm 45.7 mm coding pin CXPOL • Weight per piece 6.6 g 6.3 g 6.0 g 2/4 way strain relief CXS2RN CXS4RN ( , ) Technical Data/Ratings Approvals APPLICATIONS CSCBHEME UL UL UL • 60947-7-1 60947-7-1 60947-7-1 Wire harness for easy Wire Size (solid / stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 •connection Voltage Rating 300 V 800 V 300 V 800 V 300 V 800 V Pluggable wire to wire Current Rating 20 A 24 A 20 A 24 A 20 A 24 A connection inside panels Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm 8 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm CXSR4N Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CX2.5PN Grey (standard) Start Element CX2.5/1B 100 CX2.5PN 50 CX2.5SN 50 Last Element CX2.5PLN 50 CX2.5SLN 50 2 pole CX2.5PN/2 50 CX2.5SN/2 50 CX2.5/1B CXLPN 3 pole CX2.5PN/3 50 CX2.5SN/3 50 4 pole CX2.5PN/3 50 CX2.5SN/4 50 5 pole CX2.5PN/4 50 CX2.5SN/5 50 6 pole CX2.5PN/5 50 CX2.5SN/6 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCX2.5 50 – – – – DIN Rail 2511120 20 2511120 20 2511120 20 CX2.5PN CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Clamp CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA103 50 CA103 50 CA103 50 Shorting Link/ 2 pole JX2.5/2 100 – – – – Jumpers 3 pole JX2.5/3 50 – – – – 4 pole JX2.5/4 50 – – – – CXSR2N 5 pole JX2.5/5 50 – – – – 6 pole JX2.5/6 10 – – – – 7 pole JX2.5/7 10 – – – – 8 pole JX2.5/8 10 – – – – 10 pole JX2.5/10 10 – – – – DIN Mounting Foot – – – – CXDIN 25 Locking Clip – – CXLPN 25 – – Strain Relief 2 Way – – CXSR2N 25 CXSR2N 25 CXDIN 4 Way – – CXSR4N 25 CXSR4N 25 Coding Pin CXPOL 25 CXPOL 25 CXPOL 25 Marking Tag MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) 78 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

CX-DISTRIBUTION COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXDB35/10 CXDB35/10A HIGHLIGHTS FEATURES • with Hybrid Distribution Allen Screw Terminal Block • Screw input (115A) • 4 spring clamp outputs 1 Flat Head Screw Input 1 Hex Screw Input • (4 x41A) 4 Spring Clamp Outputs 4 Spring Clamp Outputs Modular system Dimensions & Weight • Standard slot & hex screw versions • Width 16 mm 16 mm Expandable with standard CX Series Length 81.6 mm 81.6 mm jumpers and terminal blocks Height w DIN Rail 35 x 7.5 mm 46.8 mm 46.8 mm • Easy Installation 35 x 15 mm 54.3 mm 54.3 mm Weight per piece 53.2 g 53.2 g APPLICATIONS General Specifications • Miniature Circuit Breaker (MCB) Approvals distribution • CSCBHEME Limited space distribution E220514 60947-7-1 E220514 60947-7-1 Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC Insulation Material Polyamide 66 Polyamide 66 Output Expansion INPUT Technical Data/Ratings CXDB35/10A Wire Size (solid / stranded) 14-2 AWG 1.5-35 mm2 14-2 AWG 1.5-35 mm2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm 2 x CX6 Installation Instructions Terminal Blocks (see page 64) Wire Stripping Length 17 mm 17 mm Screwdriver Flat Head 1.0 x 5.5 mm Hex Screw M5 JX6/3 OUTPUT Technical Data/Ratings Wire Size (solid / stranded) 24-8 AWG 0.2-10 mm2 24-8 AWG 0.2-10 mm2 Current Rating 41 A 41 A 41 A 41 A MCB Distribution Example Installation Instructions Wire Stripping Length 15 mm 15 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Grey CXDB35/10 20 CXDB35/10A 20 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. DIN Rail 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 End Clamp CA702 50 CA702 50 CA802 50 CA802 50 CA103 50 CA103 50 Jumpers JX6/2 100 JX6/2 100 JX6/3 50 JX6/3 50 JX6/4 50 JX6/4 50 JX6/10 10 JX6/10 10 Marking Tag MT16 1 Pk. (100 tags) MT16 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 79

ANGULAR SERIES ANGULAR FEED-THROUGH SPRING TERMINAL BLOCKS AS2.5 AS4 AS6 HIGHLIGHTS FEATURES • 45” Wire entry for easy installation • 2.5mm to 8mm terminal 2 Connection Feed-Through 2 Connection Feed-Through 2 Connection Feed-Through •blocks Dimensions & Weight 2 Jumper Slots 2 Jumper Slots 2 Jumper Slots 22-8 AWG wire sizes • Width 5 mm 6 mm 8 mm 2, 3, and 4 Connection Ground Terminals Length 54 mm 61.5 mm 74 mm • Accessories Height w DIN Rail 35 x 7.5 mm 44.0 mm 44.0 mm 49.3 mm 35 x 15 mm 51.0 mm 51.0 mm 57.0 mm APPLICATIONS Weight per piece 6.5 g 9.0 g 14.8 g • Panels with limited wiring Technical Data/Ratings space • Approvals Vibration Applications • •Elevator Cabinets CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 People Movers Wire Size (solid / stranded) 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 • Transportation Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 35 A 32 A 50 A 41 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 11 mm 15 mm 15 mm Screwdriver Flat Head 0.5 x 3mm Flat Head0.6 x 3.5 mm Flat Head0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) AS2.5 100 AS4 100 AS6 50 Red R AS2.5/R 100 AS4/R 100 AS6/R 50 Blue BU AS2.5/BU 100 AS4/BU 100 AS6/BU 50 Black BL AS2.5/BL 100 AS4/BL 100 AS6/BL 50 Orange O AS2.5/O 100 AS4/O 100 AS6/O 50 Green G AS2.5/G 100 AS4/G 100 AS6/G 50 Yellow Y AS2.5/Y 100 AS4/Y 100 AS6/Y 50 White W AS2.5/W 100 AS4/W 100 AS6/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 EPAS6 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA103 50 CA103 50 CA103 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 2 Pole Jumper CA801/1 100 CA801/2 100 CA801/3 100 Jumpers Alternate CA801/1-3 100 CA801/2-3 100 CA801/3-3 100 Push in wire jumper CA901/1 100 CA901/2 100 CA901/3 100 Step Down AS6 to AS4 – – CA901/4 100 CA901/4 100 Jumper AS6 to AS2.5 CA901/5 100 – – CA901/5 100 AS4 to AS2.5 CA901/6 100 CA901/6 100 – – AS6 to AS2.5 CA801/8 100 – – CA801/8 100 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) 80 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ANGULAR SERIES MULTI-CONNECTION ANGULAR FEED-THROUGH SPRING TERMINAL BLOCKS AS2.5/3 AS2.5/4 AS4/3 AS4/4 3 Connection Feed-Through 4 Connection Feed-Through 3 Connection Feed-Through 4 Connection Feed-Through Dimensions & Weight 2 Jumper Slots 2 Jumper Slots Width 5 mm 5 mm 6 mm 6 mm Length 54 mm 54 mm 61.5 mm 61.5 mm Height w DIN Rail 35 x 7.5 mm 44.0 mm 44.0 mm 44.0 mm 44.0 mm 35 x 15 mm 51.0 mm 51.0 mm 51.0 mm 51.0 mm Weight per piece 7.5 g 15.5 g 11.0 g 12.6 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.34-2.5 mm2 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 25 A 24 A 35 A 32 A 35 A 32 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 11 mm 11 mm 15 mm 15 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) AS2.5/3 100 AS2.5/4 100 AS4/3 100 AS4/4 100 Red R AS2.5/3/R 100 AS2.5/4/R 100 AS4/3/R 100 AS4/4/R 100 Blue BU AS2.5/3/BU 100 AS2.5/4/BU 100 AS4/3/BU 100 AS4/4/BU 100 Black BL AS2.5/3/BL 100 AS2.5/4/BL 100 AS4/3/BL 100 AS4/4/BL 100 Orange O AS2.5/3/O 100 AS2.5/4/O 100 AS4/3/O 100 AS4/4/O 100 Green G AS2.5/3/G 100 AS2.5/4/G 100 AS4/3/G 100 AS4/4/G 100 Yellow Y AS2.5/3/Y 100 AS2.5/4/Y 100 AS4/3/Y 100 AS4/4/Y 100 White W AS2.5/3/W 100 AS2.5/4/W 100 AS4/3/W 100 AS4/4/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS2.5 50 EPAS4 50 EPAS4 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA103 50 CA103 50 CA103 50 CA103 50 CA702 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA802 50 2 Pole Jumper CA801/1 100 DOES NOT ACCEPT JUMPERS CA801/2 100 DOES NOT ACCEPT JUMPERS Jumpers Alternate CA801/1-3 100 – – CA801/2-3 100 – – Push in wire jumper CA901/1 100 – – CA901/2 100 – – Step Down AS6 to AS4 – – – – CA901/4 100 – – Jumper AS6 to AS2.5 CA901/5 100 – – – – – – AS4 to AS2.5 CA901/6 100 – – CA901/6 100 – – AS6 to AS2.5 CA801/8 100 – – – – – – Marking Tag MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 81

ANGULAR SERIES DOUBLE LEVEL ANGULAR FEED-THROUGH SPRING TERMINAL BLOCKS AS6/3 ADL2.5(E)D1/D2 ADLG2.5 1 2 1 2 3 4 3 4 ADL2.5(E)D1 ADL2.5(E)D2 3 Connection Feed-Through Double Level with built-in Diode Double Level with additional 2 Jumper Slots for circuit protection snap-on grounding connection Dimensions & Weight Width 8 mm 5 mm 5 mm Length 74 mm 79.5 mm 83.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 57.5 mm 64.8 mm 35 x 15 mm 57 mm 65 mm 72.3 mm Weight per piece 18.6 g 14.0 g 20.9 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-8AWG 0.2-6 mm2 22-12 AWG 0.34-2.5 mm2 22-12 AWG 0.34 mm2 Voltage Range 600 V 800 V 300 V 800 V 600 V 800 V Current Rating 50 A 41 A 25 A 24 A 20 A 24 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 15 mm 11 mm 10 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) AS6/3 50 ADL2.5(E)D1 50 ADLG2.5 50 ADL2.5(E)D2 50 Yellow/Green Red R AS6/3/R 50 Blue BU AS6/3/BU 50 Black BL AS6/3/BL 50 Orange O AS6/3/O 50 Green G AS6/3/G 50 Yellow Y AS6/3/Y 50 White W AS6/3/W 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS6 50 EPADL2.5 50 EPADLG2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA103 50 CA103 50 CA103 50 CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 Jumpers Adjacent CA801/3 100 CA801/1 100 – – Jumpers Alternate CA801/3-3 100 CA801/1-3 100 – – Push in wire jumper CA901/3 100 CA901/1 100 – – Step Down AS6 to AS4 CA901/4 100 – – – – Jumper AS6 to AS2.5 CA901/5 100 CA901/5 100 – – AS4 to AS2.5 – – CA901/6 100 – – AS6 to AS2.5 CA801/8 100 CA901/8 100 – – Marking Tag MT8 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT2G 1 Pk. (100 tags) 82 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ANGULAR SERIES TRIPLE LEVEL ANGULAR SPRING CLAMP SPRING TERMINAL BLOCKS ATL2.5 ATL2.5H ATLG2.5 Triple Level Spring Terminal Triple Level with Triple Level with additional Jumper Slot on each Level top level Feed-Through and snap-on grounding connection Dimensions & Weight mid/bottom level connections Width 5 mm 5 mm 5 mm Length 100 mm 76.1 mm 100 mm Height w DIN Rail 35 x 7.5 mm 75.0 mm 75.0 mm 75.0 mm 35 x 15 mm 82.5 mm 82.5 mm 82.5 mm Weight per piece 19.4 g 12.2 g 23.6 g Technical Data/Ratings Approvals CSCBHEME UL E220514 60947-7-1 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 Voltage Rating 600 V 500 V - 500 V 600 V 500 V Current Rating 20 A 24 A - 24 A 20 A 24 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 10 mm 10 mm 10 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) ATL2.5 100 ATL2.5H 100 ATLG2.5 100 Red R ATL2.5/R 100 ATL2.5H/R 100 Yellow/Green Blue BU ATL2.5/BU 100 ATL2.5H/BU 100 Black BL ATL2.5/BL 100 ATL2.5H/BL 100 Orange O ATL2.5/O 100 ATL2.5H/O 100 Green G ATL2.5/G 100 ATL2.5H/G 100 Yellow Y ATL2.5/Y 100 ATL2.5H/Y 100 White W ATL2.5/W 100 ATL2.5H/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPATL2.5 50 EPATL2.5H 50 EPATLG2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 End Stop CA702 50 CA702 50 CA702 50 CA802 50 CA802 50 CA802 50 CA202 50 CA202 50 CA202 50 CA103 50 CA103 50 CA103 50 Push In 2 pole CA801/A2 100 CA801/A2 100 CA801/A2 100 Jumpers 3 pole CA801/A3 100 CA801/A3 100 CA801/A3 100 4 pole CA801/A4 100 CA801/A4 100 CA801/A4 100 10 pole CA801/A10 10 CA801/A10 10 CA801/A10 10 Marking Tag MT2G 1 Pk. (100 tags) MT2G 1 Pk. (100 tags) MT2G 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 83

ANGULAR SERIES GROUND / EARTH ANGULAR SPRING CLAMP SPRING TERMINAL BLOCKS AGT2.5 AGT4 AGT6 AGT2.5/3 2 Connection Ground Terminal 2 Connection Ground Terminal 2 Connection Ground Terminal 3 Connection Ground Terminal Dimensions & Weight Feed-Through Feed-Through Feed-Through Feed-Through Width 5 mm 6 mm 8 mm 5 mm Length 54 mm 61.5 mm 74 mm 54 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 49.5 mm 55.5 mm 49.5 mm 35 x 15 mm 57 mm 57 mm 63 mm 57 mm Weight per piece 13.5 g 12.0 g 19.0 g 14.5 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-6 mm2 22-12 AWG 0.34-2.5 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating - - - - - - - - Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 11 mm 15 mm 15 mm 12 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head0.8 x 4 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green AGT2.5 100 AGT4 100 AGT6 50 AGT2.5/3 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 EPAS6 50 EPAS2.5 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT5 1 Pk. (100 tags) 84 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ANGULAR SERIES GROUND / EARTH ANGULAR SPRING CLAMP SPRING TERMINAL BLOCKS AGT2.5/4 AGT4/3 AGT4/4 AGT6/3 4 Connection Ground Terminal 3 Connection Ground Terminal 4 Connection Ground Terminal 3 Connection Ground Terminal Dimensions & Weight Feed-Through Feed-Through Feed-Through Feed-Through Width 5 mm 6 mm 6 mm 8 mm Length 54 mm 61.5 mm 61.5 mm 74 mm Height w DIN Rail 35 x 7.5 mm 44.0 mm 44.0 mm 44.0 mm 49.3 mm 35 x 15 mm 51.6 mm 51.6 mm 51.6 mm 57.0 mm Weight per piece 15.5 g 14.5 g 18.6 g 22.0 g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 0.34-2.5 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-8 AWG 0.2-6 mm2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating - - - - - - - - Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 12 mm 15 mm 15 mm 15 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head0.8 x 4 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Yellow/Green AGT2.5/4 100 AGT4/3 100 AGT4/4 50 AGT6/3 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPAS2.5 50 EPAS4 50 EPAS4 50 EPAS6 50 DIN Rail 2511120 20 2511120 20 2511120 20 2511120 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 CA701-15/S 20 Marking Tag MT5 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT6 1 Pk. (100 tags) MT8 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 85

ACCESSORIES JUMPERS / SHORTING LINKS SPRING TERMINAL BLOCKS CX SERIES Push-In Technology Multipole Jumpers Terminal Block Series Poles Cat. No. Std. Pk. 2 Pole JX2.5/2 100 3 Pole JX2.5/3 50 CX2.5 Series 4 Pole JX2.5/4 50 CXG2.5 Series 5 Pole JX2.5/5 50 CXDL2.5 6 Pole JX2.5/6 10 CXK2.5 7 Pole JX2.5/7 10 CXS2.5 8 Pole JX2.5/8 10 10 Pole JX2.5/10 10 2 Pole JX4/2 100 C X 4 S e r i e s 3 Pole JX4/3 50 Easy Breakout Felt-Tip C X G 4 S e r i e s 4 Pole JX4/4 50 Marking CXF4 8 Pole JX4/8 10 CXCC4 10 Pole JX4/10 10 CXS4 16 Pole JX4/16 10 2 Pole JX6/2 100 CX6 Series 3 Pole JX6/3 50 CXG6 Series 4 Pole JX6/4 50 CXDB35/10 10 Pole JX6/10 10 2 Jumper Channels CX10 Series 2 Pole JX10/2 20 CXG10 Series ANGULAR SERIES Push-In Wire Jumper 2 Pole Alternate Push-In Adjectant Jumper Jumper Wire Jumper 2 Pole Alternate Adjectant Jumper Jumper Terminal Block Series Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. AS2.5 / ADL2.5 Series CA801/1 100 CA801/1-3 100 CA901/1 100 AS4 Series CA801/2 100 CA801/2-3 100 CA901/2 100 AS6 Series CA801/3 100 CA801/3-3 100 CA901/3 100 STEP DOWN JUMPERS Used for jumpering terminal blocks of different sizes. CX SERIES ANGULAR SERIES Jumper for Cat. No. Std. Pk. Jumper for Cat. No. Std. Pk. CX10 to CX2.5 JXS10/2.5 50 AS6 to AS2.5 CA901/5 100 CX6 to CX2.5 JXS6/2.5 50 AS6 to AS4 CA901/4 100 CX10 to CX4 JXS10/4 50 AS4 to AS2.5 CA901/6 100 CX6 to CX4 JXS6/4 50 86 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES ENDPLATES SPRING TERMINAL BLOCKS CX SERIES ANGULAR SERIES Terminal Block Cat. No. Dimensions Std. Pk. Terminal Block Cat. No. Dimensions Std. Pk. CX2.5 AS2.5 EPCX2.5 30.5 x 49.7 x 1.5mm 50 CXG2.5 AS2.5/XX EPAS2.5 35 x 54 x 1.5mm 50 AGT2.5 C X 4 EPCX4 30.5 x 54.8 x 1.5mm 50 AGT2.5/XX CXG4 AS4 CX6 AS4/XX C X G 6 EPCX6 35.3 x 62.1 x 1.5mm 50 A G T 4 EPAS4 27.5 x 61 x 1.5mm 50 AGT4/XX CX10 EPCX10 41.6 x 70 x 1.5mm 50 AS6 CXG10 A S 6 / X X EPAS6 33.5 x 74 x 1.5mm 50 CX2.5/3 AGT6 C X G 2 . 5 / 3 EPCX2.5/3 30.5 x 62.2 x 1.5mm 50 AGT6/XX CXK2.5 A D L 2 . 5 EPADL2.5 43.5 x 80 x 1.5mm 50 CX2.5/4 EPCX2.5/4 30.5 x 74.7 x 1.5mm 50 CXG2.5/4 A D L G 2 . 5 EPADLG2.5 83.7 x 58 x 1.2mm 50 CX4/3 C X G 4 / 3 EPCX4/3 30.5 x 70.5 x 1.5mm 50 A T L 2 . 5 EPATL2.5 100 x 69.7 x 1.2mm 50 CXK4 A T L 2 . 5 H EPATL2.5H 77.3 x 69.7 x 1.2mm 50 CX4/4 EPCX4/4 30.5 x 86.2 x 1.5mm 50 CXG4/4 A T L G 2 . 5 EPATLG2.5 100 x 68.7 x 1.2mm 50 CX6/3 EPCX6/3 35.3 x 82.2 x 1.5mm 50 CXG6/3 END STOPS CA103 CX10/3 EPCX10/3 41.6 x 95.3 x 1.5mm 50 CXG10/3 Screwless CXDL2.5 Snap On EPCXDL2.5 41.8 x 72.7 x 1.5mm 50 CXDLG2.5 C X S 2 . 5 EPCXS2.5 35.6 x 43 x 1.5mm 50 Cat. No. Dimensions Std. Pk. CA103 35 x 41 x 6mm 50 C X S 4 EPCXS4 50 CA702 CA802 PARTITION PLATES Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA802 32 x 45 x 8mm 50 CA702 34 x 45 x 9mm 50 CX SERIES TEST PLUGS Terminal Block Cat. No. Dimensions Std. Pk. Terminal Block Cat. No. Std. Pk. CX2.5, CXG2.5, CX2.5, CXG2.5 PPCX4 42.4 x 59 x 2mm 50 C X D L 2 . 5 , C X G 4 , TX2.5 20 CX4, CXG4 CXM2.5, CXMG2.5 CX2.5/3, CX4, CXG4, C X G 2 . 5 / 3 PPCX4/3 42.4 x 74.7 x 2mm 50 TX4 20 CX7, CXG6 CX4/3, CXK2.5 C X 6 , C X D B TX6 20 CX2.5/4, PPCX4/4 42.4 x 95 x 2mm 50 CXG2.5/4 CX4/4, CXK4/4 C X 6 , C X 1 0 PPCX6 53.5 x 76 x 1mm 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 87

OVERVIEW INTRODUCTION MINI / PANEL MOUNT TERMINALS SCREW CLAMP TECHNOLOGY •Screw clamp & Spring Clamp Technology versions •High Temperature Ceramic Solution •Extremely Compact wiring solution •Reliable Gas-tight connection •15mm Mini Rail Terminals •Modular easy snap together Panel Mount Terminals E220514 60947-7-1 MATERIAL SPECIFICATIONS Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications • Polyamide PA66 Housing Upper Temperature Limit: 105°C • Self-extinguishing Lower Temperature Limit: -50°C Screw Terminals Spring Terminals • High mechanical strength Flammability UL94: V2/ V0 Corrosion free material Corrosion free material Volume Resistivity: 1012Ω cm Surface Resistivity: 1010Ω • Clamp: Zinc Plated Steel • Spring: Stainless Steel • Screw: Steel • Current Bar: Copper Alloy • Current Bar: Brass/ Tin Plated Copper SELECTION GUIDE Screw Terminal Blocks • Extremely Compact size • Various mounting options • 15mm Mini Rail • Panel Mount • Modular system 15mm Mini Rail Panel Mount • Jumper Accessories CMT4 CMB4 • Screw Clamp Technology page 89 page 90 Spring Clamp Terminal Blocks • Extremely Compact size • Various mounting options • 15mm Mini Rail • Panel Mount 15mm Mini Rail Panel/DIN Rail Panel Mount • Modular Snap together Systems CXM2.5 CSCP Series CM Series • Spring Clamp Technology page 91 page 92 page 93 High Temperature Ceramic Terminal Blocks • High Temperatures up to 600°C • Ceramic Material • 3 sizes High Temperature • Up to 65A/ 300V CB Series • Free floating or mounting hole option page 94 88 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

MINI RAIL CMT SERIES MINI RAIL SCREW TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CF4U CMT4 CGMT4 HIGHLIGHTS FEATURES • Extremely Compact Size • Screw Cage Clamp • Mountable on DIN15 2 Connection Feed-Through 2 Connection Ground Terminal 5 x 20 mm Dimensions & Weight Internal Jumper Provision Internal Jumper Provision Fuse Terminal • Mini Rail Feed Through Terminal • Width 6 mm 6 mm 8 mm Ground Terminal • Length 27 mm 27 mm 57.0 mm • Internal Jumper possibility EX / IECEx approved Height w DIN15 Rail 15mm 30.4 mm 30.7 mm 50.3 mm | 57.6 mm Weight per piece 5.5 g 9.5 g 14.8 g APPLICATIONS Technical Data/Ratings • Limited Space Panels Approvals • High Density Wiring E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-3 Solutions Wire Size (solid / stranded) 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 22-10 AWG 0.2-4 mm2 Voltage Rating 300 V 500 V AC/DC 300 V 500 V AC/DC 600 V 800 V AC/DC Current Rating 35 A 32 A - - 10 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.8 Nm 7 lb-in 0.5 Nm Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 8 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CMT4 100 CGMT4 100 CF4U 50 Red R CMT4/R 100 Yellow/Green CF4U/BU 50 Blue BU CMT4/BU 100 CF4U/BL 50 Black BL CMT4/BL 100 Orange O CMT4/O 100 Green G CMT4/G 100 Yellow Y CMT4/Y 100 White W CMT4/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCMT4 50 – – – – Isolation Partition PPCMT4 50 – – – – DIN Rail 15mm CA601/S 50 CA601/S 50 CA601/S 50 End Clamp CA602 100 CA602 100 – – Internal Jumper 2 pole CA727/2 100 – – – – 3 pole CA727/3 100 – – – – 4 pole CA727/4 100 – – – – 10 pole CA727/10 10 – – – – Insulated Internal 2 pole CA747/2 100 – – – – Jumper 3 pole CA747/3 100 – – – – 4 pole CA747/4 100 – – – – 10 pole CA747/10 10 – – – – External Jumper 2 pole CA714/2 100 CA714/2 100 CA711/2 100 3 pole CA714/3 100 CA714/3 100 CA711/3 50 4 pole CA714/4 100 CA714/4 100 CA711/4 50 10 pole CA714/10 20 CA714/10 20 CA711/10 20 Test Socket CA707/TS/03 100 CA707/TS/03 – – – Marking Tag MT2 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT8 1 Pk. (100 tags) MT6 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 89

PANEL MOUNT CMB SERIES PANEL MOUNT SCREW TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CMB4 HIGHLIGHTS FEATURES • Extremely Compact Size • •Screw Cage Clamp 2 Connection Feed Through Panel Mountable with any Dimensions & Weight Pre-assembled Terminal Blocks length M3 screw (cid:127) • Width 6 mm No. of Poles Cat. No Total Width (a) Hole Spacing (b) End / Mounting Section with M3 mounting holes Length 27 mm 2 CMB4/2 26 mm (1.02”) 19 mm (0.75”) • 3 CMB4/3 32 mm (1.26”) 25 mm (0.98”) Stackable design for flexible Height 28 mm 4 CMB4/4 38 mm (1.50”) 31 mm (1.22”) length configurations • Weight per piece 5.5 g 5 CMB4/5 44 mm (1.73”) 37 mm (1.46”) Modular snap-together 6 CMB4/6 50 mm (1.97”) 43 mm (1.69”) design for quick assembly Technical Data/Ratings 7 CMB4/7 56 mm (2.20”) 49 mm (1.93”) and installation • 8 CMB4/8 62 mm (2.44”) 55 mm (2.17”) Endplates with mounting Approvals 9 CMB4/9 68 mm (2.68”) 61 mm (2.40”) holes • 10 CMB4/10 74 mm (2.91”) 67 mm (2.64”) •Internal Jumper possibility Wire Size (solid / stranded) E222025-1140 AWG 0.620-944 7m-7m-12 11 CMB4/11 80 mm (3.15”) 73 mm (2.87”) •EX / IECEx approved Voltage Rating 300 V 500 V AC/DC 12 CMB4/12 86 mm (3.39”) 79 mm (3.11”) Pre-assembled Blocks 13 CMB4/13 92 mm (3.62”) 85 mm (3.35”) available in all pole configu- Current Rating 35 A 32 A 14 CMB4/14 98 mm (3.86”) 91 mm (3.58”) rations and various colors 15 CMB4/15 104 mm (4.09”) 97 mm (3.82”) Torque 7lb-in 0.5 Nm 16 CMB4/16 110 mm (4.33”) 103 mm (4.06”) APPLICATIONS Insulation Material Polyamide 66 17 CMB4/17 116 mm (4.57”) 109 mm (4.29”) 18 CMB4/18 122 mm (4.80”) 115 mm (4.53”) • Installation Instructions Cost Effective Wiring 19 CMB4/19 128 mm (5.04”) 121 mm (4.76”) •Solutions Wire Stripping Length 8 mm 20 CMB4/20 134 mm (5.28”) 127 mm (5.00”) Compact Wiring Solutions 21 CMB4/21 140 mm (5.51”) 133 mm (5.24”) • Screwdriver Flat Head 0.6 x 3.5mm Panel Mount Designs 22 CMB4/22 146 mm (5.75”) 139 mm (5.47”) • High Density Wiring Mounting Screw Any length M3 screw may be used 23 CMB4/23 152 mm (5.98”) 145 mm (5.71”) 24 CMB4/24 158 mm (6.22”) 151 mm (5.94”) Terminal Blocks Cat. No. Std. Pk. Grey (standard) CMB4 100 b Red R CMB4/R 100 a Blue BU CMB4/BU 100 Black BL CMB4/BL 100 Orange O CMB4/O 100 Green G CMB4/G 100 Yellow Y CMB4/Y 100 Dimensions CMB4 White W CMB4/W 100 Accessories Cat. No. Std. Pk. End / Mounting Section EPCMB4 50 Mounting Section Separator Plate SPCMB4 50 Dimensions Internal 2 pole CA727/2 100 EPCMB4 Jumper 3 pole CA727/3 100 4 pole CA727/4 100 10 pole CA727/10 10 4 Pole Internal Jumper Insulated 2 pole CA747/2 100 CA727/4 Internal 3 pole CA747/3 100 Jumper 4 pole CA747/4 100 10 pole CA747/10 10 CMB4 External 2 pole CA714/2 100 Terminal Block Jumper 3 pole CA714/3 100 4 pole CA714/4 100 10 pole CA714/10 20 Test Socket CA707/TS/01 100 Marking Tag MT2 1 Pk. (100 tags) End / Mounting Section EPCMB4 90 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

MINI RAIL CXM SERIES MINI RAIL SPRING TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CXM2.5 CXMG2.5 CMS2.5 HIGHLIGHTS FEATURES • Extremely Compact Size • Spring Clamp Style • Mountable on DIN 15 2 Connection Feed Through 2 Connection Ground Terminal Side Entry Feed Through Mini Rail Dimensions & Weight 2 Jumper Channels 2 Jumper Channels • Feed Through Terminal • Width 5 mm 5 mm 5 mm Ground Terminal • Length 37 mm 37 mm 31 mm •Side Entry Feed Through 2, 3, 4, 5, 6, 7, 10 pole Height w DIN Rail 15 x 5.5 mm 35 mm 35 mm 30.15 mm Push-In Jumpers • Weight per piece 5.9 g 10.3 g 5.9 g EX / IECEx approved Technical Data/Ratings Approvals APPLICATIONS • CSCBHEME UL Limited Space Panels E220514 60947-7-1 E220514 60947-7-1 60947-7-1 • Wire Size (solid / stranded) 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 24-12 AWG 0.2-2.5 mm2 High Density Wiring Solutions Voltage Rating 600 V 1000V AC/DC 600 V 1000V AC/DC 300 V 800V AC/DC • Machine Control Panels • Current Rating 20 A 24 A - - 20 A 24 A High Vibration Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Applications Installation Instructions Wire Stripping Length 10 mm 10 mm 9 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CXM2.5 100 CXMG2.5 100 CMS2.5 100 Red R CXM2.5/R 100 Yellow/Green CMS2.5/R 100 Blue BU CXM2.5/BU 100 CMS2.5/BU 100 Black BL CXM2.5/BL 100 CMS2.5/BL 100 Orange O CXM2.5/O 100 CMS2.5/O 100 Green G CXM2.5/G 100 CMS2.5/G 100 Yellow Y CXM2.5/Y 100 CMS2.5/Y 100 White W CXM2.5/W 100 CMS2.5/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCXM2.5 50 EPCXM2.5 50 EPCMS2.5 50 DIN Rail CA601/S 50 CA601/S 50 CA601/S 50 15mm End Clamp CA602 100 CA602 100 CA602 100 Jumper 2 pole JX2.5/2 100 JX2.5/2 100 – – 3 pole JX2.5/3 50 JX2.5/3 50 – – 4 pole JX2.5/4 50 JX2.5/4 50 – – 5 pole JX2.5/5 50 JX2.5/5 50 – – 6 pole JX2.5/6 10 JX2.5/6 10 – – 7 pole JX2.5/7 10 JX2.5/7 10 – – 8 pole JX2.5/8 10 JX2.5/8 10 – – 10 pole JX2.5/10 10 JX2.5/10 10 – – Spring Clamp Actuator SCA2-5 1 SCA2-5 1 – – Marking Tag MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) MT5 1 Pk. (100 tags) Operating Tool for use with CXM2.5 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 91

PANEL MOUNT CSCP SERIES PANEL MOUNT SPRING TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CSCP2.5T CSCP2.5T2 CXCP2.5/4 HIGHLIGHTS FEATURES • Extremely Compact Size • Screw Cage Clamp • Panel Mountable with any 2 Connection Spring Terminal 4 Connection Spring Terminal 4 Connection Spring Terminal •screw Dimensions & Weight Panel Mount Panel Mount DIN Rail Mount Endplates with screw flange • Width 5 mm 10 mm 10 mm Stackable design for flexible length configurations Length 35 mm 35 mm 35 mm • Modular snap-together Height w DIN Rail 35 x 7.5 mm 34.5 mm design for quick assembly 21.3 mm (Panel Mount) 21.3 mm (Panel Mount) 35 x 15 mm 42 mm and easy installation • External Jumper possibility Weight per piece 5.0 g 9.5 g 9.5 g • •EX / IECEx approved Technical Data/Ratings Custom assemblies Approvals available in all pole configu- rations and various colors E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 22-14 AWG 0.2-2.5 mm2 22-14 AWG 0.2-2.5 mm2 22-12 AWG 0.2-2.5 mm2 APPLICATIONS Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC • Current Rating 20 A 24 A 20 A 24 A 20 A 24 A Cost Effective Panel Mount Designs Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 • Limited Space Panels • Installation Instructions High Density Wiring Wire Stripping Length 11 mm 11 mm 10 mm Solutions • Machine Control Panels Screwdriver Flat Head0.5 x 3 mm Flat Head0.5 x 3 mm Flat Head0.5 x 3 mm • High Vibration Applications Mounting Screw Any length M3 screw may be used Any length M3 screw may be used – Terminal Blocks Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CSCP2.5T 100 CSCP2.5T2 100 CXCP2.5/4 100 Operating Tool Red R CSCP2.5T/R 100 CSCP2.5T2/R 100 CXCP2.5/4/R 100 for use with Blue BU CSCP2.5T/BU 100 CSCP2.5T2/BU 100 CXCP2.5/4/BU 100 CSCP2.5T2 Black BL CSCP2.5T/BL 100 CSCP2.5T2/BL 100 CXCP2.5/4/BL 100 Orange O CSCP2.5T/O 100 CSCP2.5T2/O 100 CXCP2.5/4/O 100 Green G CSCP2.5T/G 100 CSCP2.5T2/G 100 CXCP2.5/4/G 100 Yellow Y CSCP2.5T/Y 100 CSCP2.5T2/Y 100 CXCP2.5/4/Y 100 White W CSCP2.5T/W 100 CSCP2.5T2/W 100 CXCP2.5/4/W 100 Custom Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Assembly End Section EPCSCP2.5T 25 EPCSCP2.5T 25 EPCXCP2.5 25 Example Insulated Jumpers CA803/1 100 CA803/1 100 CA803/1 100 (2 pole) Marking Tag MT4 1 Pk. (100 tags) MT3 1 Pk. (100 tags) MT3 1 Pk. (100 tags) Operating Tool SCA2-5 1 SCA2-5 1 SCA2-5 1 PANEL MOUNT DIN RAIL MOUNT CSCP2.5T2 CSCP2.5T2 EPCSCP2.5T CXCP2.5/14 EPCSCP2.5T DIN Rail Mounting Foot CSCP2.5T CSCP2.5T SCREW FLANGE 92 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

MICRO CM SERIES MICRO PANEL MOUNT SPRING TERMINAL BLOCKS MINI / PANEL MOUNT TERMINALS CM1.5S CM2.5S CM4S HIGHLIGHTS FEATURES • CM1.5S CM2.5S CM4S Extremely Compact Size • Spring Clamp Style • CM1.5S2 CM2.5S2 CM4S2 End Sections with screw flanges • 3 wire sizes • 2, 4 connection terminals • All colors CM1.5S2 CM2.5S2 CM4S2 APPLICATIONS • Dimensions Transformer Terminal Blocks Width 2 Connection 5 mm 6 mm 7 mm • Very Limited Space 4 Connection 8 mm 10 mm 12 mm Applications Length 26.5 mm 30.0 mm 33.7 mm • Machine Control Panels Height (Panel Mount) 18.0 mm 20.0 mm 23.0mm Weight per piece 1.8 / 3.8 g 3.2 / 5.2 g g Technical Data/Ratings Approvals CSCBHEME E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Wire Size (solid / stranded) 24-16 AWG 0.2-1.5 mm2 22-12 AWG 0.2-2.5 mm2 22-14 AWG 0.2-4 mm2 Voltage Rating 300 V 500V AC/DC 300 V 500V AC/DC 300 V 630V AC/DC Current Rating 10 A 17 A 20 A 24 A 26 A 32 A Insulation Material Polyamide 66 Polyamide 66 Polyamide 66 Installation Instructions Wire Stripping Length 8 mm 9 mm 8 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Terminal Blocks 2 Connections Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CM1.5S 100 CM2.5S 100 CM4S 100 Red R CM1.5S/R 100 CM2.5S/R 100 CM4S/R 100 Blue BU CM1.5S/BU 100 CM2.5S/BU 100 CM4S/BU 100 Black BL CM1.5S/BL 100 CM2.5S/BL 100 CM4S/BL 100 Orange O CM1.5S/O 100 CM2.5S/O 100 CM4S/O 100 Green G CM1.5S/G 100 CM2.5S/G 100 CM4S/G 100 Yellow Y CM1.5S/Y 100 CM2.5S/Y 100 CM4S/Y 100 White W CM1.5S/W 100 CM2.5S/W 100 CM4S/W 100 4 Connections Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Grey (standard) CM1.5S2 100 CM2.5S2 100 CM4S2 100 Red R CM1.5S2/R 100 CM2.5S2/R 100 CM4S2/R 100 Blue BU CM1.5S2/BU 100 CM2.5S2/BU 100 CM4S2/BU 100 Black BL CM1.5S2/BL 100 CM2.5S2/BL 100 CM4S2/BL 100 Orange O CM1.5S2/O 100 CM2.5S2/O 100 CM4S2/O 100 Green G CM1.5S2/G 100 CM2.5S2/G 100 CM4S2/G 100 Yellow Y CM1.5S2/Y 100 CM2.5S2/Y 100 CM4S2/Y 100 White W CM1.5S2/W 100 CM2.5S2/W 100 CM4S2/W 100 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Plate EPCM1.5S 50 EPCM2.5S 50 EPCM4S 50 Spring Clamp Actuator SCA2-5 1 SCA2-5 1 SCA2-5 1 Marking Tag 2 Connection MT4 1 Pk. (100 tags) MT2 1 Pk. (100 tags) MT6 1 Pk. (100 tags) 4 Connection MT7.5 1 Pk. (100 tags) MT7.5 1 Pk. (100 tags) MT12 1 Pk. (100 tags) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 93

EUROBLOCKS™ HIGH TEMPERATURE CERAMIC EUROBLOCKSTM PANEL MOUNT TERMINALS CB4 CB6 CB16 HIGHLIGHTS FEATURES Technical Data/Ratings • Suitable for High Approvals Temperatures up to •600°C (1112°F) E220514 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 Temperature Rating Wire Size (solid / stranded) 24-12 AWG 24-12 AWG0.5-2.5mm2 22-10 AWG 22-10 AWG 0.5-4mm2 18-6 AWG 20-6 AWG 0.5-2.5mm2 •-40°C - 600°C Voltage Rating 300 V 300 V 800VAC/DC 300 V 300 V 800VAC/DC 300 V 300 V 800VAC/DC •3 Sizes Current Rating 20 A 30 A 24 A 30 A 40 A 32 A 65 A 76 A 57 A 1, 2, 3, 4 Pole configurations • Torque 6lb-in 6lb-in 0.4 Nm 6lb-in 6lb-in 0.5 Nm 12lb-in 12lb-in 1.2 Nm Free floating or Panel Mount • Up to 65A Insulation Material Ceramic Ceramic Ceramic • M• aterial: Installation Instructions •Housing: Steatite Wire Stripping Length 8 mm 8 mm 8 mm Clamp: Brass • Screwdriver Flat Head 0.5 x 3 mm Flat Head0.8 x 4 mm Flat Head0.8 x 4 mm Screws: Zinc Plated Steel Mounting Hole Size 3.5 mm 3.5 mm 3.5 mm APPLICATIONS Recommended Mounting Screw M3 x 16 M3 x 16 M3 x 20 • High Temperature Terminal Blocks Cat. No. Std. Pk. Weight Cat. No. Std. Pk. Weight Cat. No. Std. Pk. Weight •Environments 1 pole free floating CB4/1 50 11.7 g CB6/1 50 13.5 g - - - •Furnaces 2 pole free floating CB4/2 50 18.0 g - - - - - - •Heaters with mounting holes CB4/2H 50 26.1 g CB6/2H 50 27.3 g CB16/2H 50 47.2 g Process Equipment 3 pole free floating CB4/3 50 30.1 g - - - - - - • Machinery with mounting holes CB4/3H 50 42.3 g CB6/3H 50 42.5 g CB16/3H 50 44.6 g 4 pole with mounting holes - - - CB6/4H 50 29.1 g - - - Dimensions (All dimensions are shown in mm, to convert to inches please divide by 25.4) CB4/1 CB6/1 CB4/2H CB6/2H CB16/2H CB4/2 23 25.5 23 14.6 25.5 12.6 28 16.5 23 18 24 26 31 11 12 6 6 6 18.5 19.5 18.5 19.5 23.2 18.5 3.5 3.5 3.5 7.3 13 15 17 CB4/3 CB4/3H CB6/3H CB16/3H CB6/4H 13 15 17 23 23 25.5 28 20 36 41 48 39 25 6 6 6 6 6 6 6 18.5 18.5 19.5 23.2 16 7.3 8 13 3.5 15 3.5 17 3.5 3.5 94 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® OVERVIEW TERMINAL STRIPS SCREW CLAMP CONNECTION TECHNOLOGY •Quick and Efficient Wire-to-Wire connection solution •Safe, Gas-tight connection •Modern Replacement for traditional Double-Row •Reliable connection utilizing a precision Barrier Style Terminal Blocks machined tubular screw clamp insert •Touch-proof design to eliminate shorts •Accessories for convenient wire installation •Available in 12 poles or precut to required number and usage of poles •Easy to cut to length by using hacksaw or utility knife E211022 60998-2-1 SELECTION GUIDE HE SERIES with wire protector MATERIAL SPECIFICATIONS Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications Corrosion free material • Polyamide PA66 Housing Upper Temperature Limit: 125°C Insert • Self-extinguishing Lower Temperature Limit: -30°C • Insert: Tinned Brass • High mechanical strength Flammability UL94: V0 • Screw: Blue chromated steel • Wire protector: Stainless Steel Wire Protector HE Series Flat Base 300V HEH Series Standoff Feet 600V HE42 Series Pluggable 300V, 600V page 96-97 page 98-99 page 100-101 ATS SERIES with wire protector - Center Barrier MATERIAL SPECIFICATIONS Current Carrying Metal Terminal Block Housing Polyamide 66 Specifications Corrosion free material • Polyamide PA66 Housing Upper Temperature Limit: 125°C • Self-extinguishing Lower Temperature Limit: -30°C Insert • Insert: Nickel-plated copper alloy • High mechanical strength Flammability UL94: V0 • Screw: yellow chromated steel • Wire protector: Stainless Steel • Middle Barrier: Stainless Steel Center Barrier Wire Protector ATS Series Flat Base 300V ATSF Series Standoff Feet 600V page 102 page 103 ACCESSORIES Jumpers, Separation Plates, Marking Pins, Imprinting page 104-105 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 95

EUROSTRIPS® FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR TERMINAL STRIPS HE1 HE4 HIGHLIGHTS FEATURES Dimensions & Weight •300V up to 63A Pitch Spacing 8 mm 10 mm • Cost effective reliable Weight per piece (12 pole) 16.2 g 31.6 g wire-to-wire solution • Technical Data/Ratings Easy to use double-row terminal strips Approvals • Panel mount or free float • Finger safe metal parts E211022 60998-2-1 E211022 60998-2-1 • Wire Size (solid / stranded) 24-12 AWG 1-2.5 mm2 24-10 AWG 2.5-4 mm2 Wire protector • Voltage Rating 300 V 400 V 300 V 400 V easy to cut to required pole configuration Current Rating 20 A 6 A 30 A 10 A • •Pre cut version in stock Torque 4.4 lb-in 0.35 Nm 7.0 lb-in 0.4 Nm Color: white Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 APPLICATIONS Insert Material Tinned Brass Tinned Brass • Terminal Screw Material Blue Chromated Steel Blue Chromated Steel HVAC • Installation Instructions Appliances • •Equipment Wire Stripping Length 5 mm 6 mm Power Distribution • Mounting Hole Diameter 3.0 mm 3.6 mm Junction Boxes • Terminal Screw Size M2.6 M3 Cost effective alternative to barrier strips Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. 2 pole HE1WPR/02 13.2 mm 100 HE4WPR/02 16.4 mm 100 3 pole HE1WPR/03 21.2 mm 100 HE4WPR/03 26.4 mm 100 4 pole HE1WPR/04 29.2 mm 100 HE4WPR/04 36.4 mm 100 5 pole HE1WPR/05 37.2 mm 100 HE4WPR/05 46.4 mm 100 6 pole HE1WPR/06 45.2 mm 50 HE4WPR/06 56.4 mm 50 7 pole HE1WPR/07 53.2 mm 50 HE4WPR/07 66.4 mm 50 8 pole HE1WPR/08 61.2 mm 50 HE4WPR/08 76.4 mm 50 9 pole HE1WPR/09 69.2 mm 50 HE4WPR/09 86.4 mm 50 10 pole HE1WPR/10 77.2 mm 50 HE4WPR/10 96.4 mm 50 11 pole HE1WPR/11 85.2 mm 50 HE4WPR/11 106.4 mm 50 12 pole HE1WPR/12 93.2 mm 50 HE4WPR/12 116.4 mm 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL8-2 100 HCL10-2 100 3 pole HCL8-3 100 HCL10-3 100 4 pole HCL8-4 100 HCL10-4 100 12 pole HCL8-12 25 HCL10-12 25 Marking Plates Blank – – BS24E 25 No. 1-12 – – BS24EM1-12 25 No. 13-24 – – BS24EM13-24 25 HE1 DIMENSIONS HE4 DIMENSIONS 8 mm M2.6 10 mm M3 5.2 mm 2.8 mm Ø3 mm 3.5 mm Ø3.6 mm Mounting Hole Mounting Hole 6.5 mm 6.4 mm Ø5 mm M2.6 Ø5.7 mm M3 8.5 mm m 2.8 m 6.5 mm 12.2 mm 3.2 mm 7.9 mm 14.9 mm 8 mm Ø2.8 mm 16.2 mm 10 mm Ø3.6 20 mm L L (All dimensions are shown in mm, to convert to inches please divide by 25.4) 96 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR TERMINAL STRIPS HE6 HE10 HE16 Dimensions & Weight Pitch Spacing 12 mm 15 mm 15 mm Weight per piece (12 pole) 47.0 g 95.5 g 94.5 g Technical Data/Ratings Approvals E211022 60998-2-1 E211022 60998-2-1 E211022 60998-2-1 Wire Size (solid / stranded) 20-10 AWG 4-6 mm2 18-8 AWG 6-10 mm2 18-6 AWG 10-16 mm2 Voltage Rating 300 V 400 V 300 V 400 V 300 V 400 V Current Rating 40 A 16 A 50 A 25 A 63 A 35 A Torque 7.0 lb-in 0.55 Nm 10.6 lb-in 0.84 Nm 17.7 lb-in 1.4 Nm Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 Polyamide 66/6 V0 Insert Material Tinned Brass Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length 7 mm 8.5 mm 8.5 mm Mounting Hole Diameter 4.2 mm 4.5 mm 4.5 mm Terminal Screw Size M3.5 M4 M5 Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. 2 pole HE6WPR/02 19.8 mm 100 HE10WPR/02 24.2 mm 50 HE16WPR/02 24.2 mm 50 3 pole HE6WPR/03 31.8 mm 100 HE10WPR/03 39.2 mm 50 HE16WPR/03 39.2 mm 50 4 pole HE6WPR/04 43.8 mm 100 HE10WPR/04 54.2 mm 50 HE16WPR/04 54.2 mm 50 5 pole HE6WPR/05 55.8 mm 100 HE10WPR/05 69.2 mm 50 HE16WPR/05 69.2 mm 50 6 pole HE6WPR/06 67.8 mm 50 HE10WPR/06 84.2 mm 25 HE16WPR/06 84.2 mm 25 7 pole HE6WPR/07 79.8 mm 50 HE10WPR/07 99.2 mm 25 HE16WPR/07 99.2 mm 25 8 pole HE6WPR/08 91.8 mm 50 HE10WPR/08 114.2 mm 25 HE16WPR/08 114.2 mm 25 9 pole HE6WPR/09 103.8 mm 50 HE10WPR/09 129.2 mm 25 HE16WPR/09 129.2 mm 25 10 pole HE6WPR/10 115.8 mm 25 HE10WPR/10 144.2 mm 10 HE16WPR/10 144.2 mm 10 11 pole HE6WPR/11 127.8 mm 25 HE10WPR/11 159.2 mm 10 HE16WPR/11 159.2 mm 10 12 pole HE6WPR/12 139.8 mm 25 HE10WPR/12 174.2 mm 10 HE16WPR/12 174.2 mm 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL12-2 100 HCL15-2 100 HCL15-2 100 3 pole HCL12-3 100 HCL15-3 100 HCL15-3 100 4 pole HCL12-4 100 HCL15-4 100 HCL15-4 100 12 pole HCL12-12 25 HCL15-12 25 HCL15-12 25 Marking Plates Blank BS60E 25 BS1016E 25 BS1016E 25 No. 1-12 BS60EM1-12 25 BS1016EM1-12 25 BS1016EM1-12 25 No. 13-24 BS60EM13-24 25 BS1016EM13-24 25 BS1016EM13-24 25 HE6 DIMENSIONS HE10 DIMENSIONS HE16 DIMENSIONS 12 mm 15 mm 15 mm M5 M3.5 M4 5.7 mm 4.3 mm Ø4.2 mm 5.7 mm Ø4.5 9.3 mm Ø4.5 M5 11.3 mm 7.7 mm 9.3 mm 11.3 mm Ø8.2 M3.5 9.5 mm Ø8.2 Ø6.3 mm M4 m m 4.0 mm 8.9 mm 22.6 mm 16.8 mm 15 mm Ø5 mm 4.8 mm 11.6 mm 25.1 mm 21.9 mm 15 mm L Ø5.6 mm 4.8 m 11.6 mm 25.1 mm 21.9 m 12 mm Ø4.1 mm L L (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 97

EUROSTRIPS® STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR TERMINAL STRIPS HE1H HE4HN HIGHLIGHTS FEATURES Dimensions & Weight •600V up to 63A Pitch Spacing 8 mm 10 mm • Cost effective reliable Weight per piece (12 pole) 17.2 g 33.0 g wire-to-wire solution • Technical Data/Ratings Easy to use double-row terminal strips Approvals • Panel mount or free float • Finger safe metal parts E211022 60998-2-1 E211022 60998-2-1 • Wire Size (solid / stranded) 24-12 AWG 1-2.5 mm2 24-10 AWG 2.5-4 mm2 Wire protector • Voltage Rating 600 V 500 V 600 V 500 V easy to cut to required pole configuration Current Rating 20 A 6 A 30 A 10 A • •Pre cut version in stock Torque 4.4 lb-in 0.35 Nm 7.0 lb-in 0.4 Nm Color: white Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 APPLICATIONS Insert Material Tinned Brass Tinned Brass • Screw Material Blue Chromated Steel Blue Chromated Steel HVAC • Installation Instructions Appliances • •Equipment Wire Stripping Length 5 mm 6 mm Power Distribution • Mounting Hole Diameter 3.0 mm 3.6 mm Junction Boxes • Terminal Screw Size M2.6 M3 Cost effective alternative to barrier strips Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. 2 pole HE1HWPR/02 13.2 mm 100 HE4HNWPR/02 16.4 mm 100 3 pole HE1HWPR/03 21.2 mm 100 HE4HNWPR/03 26.4 mm 100 4 pole HE1HWPR/04 29.2 mm 100 HE4HNWPR/04 36.4 mm 100 5 pole HE1HWPR/05 37.2 mm 100 HE4HNWPR/05 46.4 mm 100 6 pole HE1HWPR/06 45.2 mm 50 HE4HNWPR/06 56.4 mm 50 7 pole HE1HWPR/07 53.2 mm 50 HE4HNWPR/07 66.4 mm 50 8 pole HE1HWPR/08 61.2 mm 50 HE4HNWPR/08 76.4 mm 50 9 pole HE1HWPR/09 69.2 mm 50 HE4HNWPR/09 86.4 mm 50 10 pole HE1HWPR/10 77.2 mm 50 HE4HNWPR/10 96.4 mm 50 11 pole HE1HWPR/11 85.2 mm 50 HE4HNWPR/11 106.4 mm 50 12 pole HE1HWPR/12 93.2 mm 50 HE4HNWPR/12 116.4 mm 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL8-2 100 HCL10-2 100 3 pole HCL8-3 100 HCL10-3 100 4 pole HCL8-4 100 HCL10-4 100 12 pole HCL8-12 25 HCL10-12 25 Marking Plates Blank – – BS24E 25 No. 1-12 – – BS24EM1-12 25 No. 13-24 – – BS24EM13-24 25 Isolation Partition – – HEP4/6H 5 Mounting Pins – – H4 50 HE1H DIMENSIONS HE4HN DIMENSIONS 8 mm M2.6 10 mm M3 5.2 mm 2.8 mm MoØun3t imngm Hole 6.4 mm 3.5 mm MouØnt3in.6g Hole 6.5 mm 8.5 mm Ø5 mm M2.6 Ø5.7 mm M3 8 mm Ø2.8 mm 6.6 mm 10.3 mm 10.1 mm 16 mm 10 mm Ø3.6 6.7 mm 12.1 mm 14.0 mm 19.1 mm L 16.2 mm L 20 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 98 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR TERMINAL STRIPS HE6H HE10H HE16H Dimensions & Weight Pitch Spacing 12 mm 15 mm 15 mm Weight per piece (12 pole) 49.1 g 98.7 g 99.3 g Technical Data/Ratings Approvals E211022 60998-2-1 E211022 60998-2-1 E211022 60998-2-1 Wire Size (solid / stranded) 20-10 AWG 4-6 mm2 18-8 AWG 6-10 mm2 18-6 AWG 10-16 mm2 Voltage Rating 600 V 500 V 600 V 500 V 600 V 500 V Current Rating 40 A 16 A 50 A 25 A 63 A 35 A Torque 7.0 lb-in 0.55 Nm 7.6 lb-in 0.84 Nm 17.7 lb-in 1.4 Nm Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 Polyamide 66/6 V0 Insert Material Tinned Brass Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length 5 mm 6 mm 6 mm Mounting Hole Diameter 4.2 mm 4.5 mm 4.5 mm Terminal Screw Size M3.5 M4 M5 Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. 2 pole HE6HWPR/02 19.8 mm 100 HE10HWPR/02 24.2 mm 40 HE16HWPR/02 24.2 mm 40 3 pole HE6HWPR/03 31.8 mm 100 HE10HWPR/03 39.2 mm 40 HE16HWPR/03 39.2 mm 40 4 pole HE6HWPR/04 43.8 mm 100 HE10HWPR/04 54.2 mm 40 HE16HWPR/04 54.2 mm 40 5 pole HE6HWPR/05 55.8 mm 100 HE10HWPR/05 69.2 mm 40 HE16HWPR/05 69.2 mm 40 6 pole HE6HWPR/06 67.8 mm 50 HE10HWPR/06 84.2 mm 20 HE16HWPR/06 84.2 mm 20 7 pole HE6HWPR/07 79.8 mm 50 HE10HWPR/07 99.2 mm 20 HE16HWPR/07 99.2 mm 20 8 pole HE6HWPR/08 91.8 mm 50 HE10HWPR/08 114.2 mm 20 HE16HWPR/08 114.2 mm 20 9 pole HE6HWPR/09 103.8 mm 50 HE10HWPR/09 129.2 mm 10 HE16HWPR/09 129.2 mm 10 10 pole HE6HWPR/10 115.8 mm 25 HE10HWPR/10 144.2 mm 10 HE16HWPR/10 144.2 mm 10 11 pole HE6HWPR/11 127.8 mm 25 HE10HWPR/11 159.2 mm 10 HE16HWPR/11 159.2 mm 10 12 pole HE6HWPR/12 139.8 mm 25 HE10HWPR/12 174.2 mm 10 HE16HWPR/12 174.2 mm 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL12-2 100 HCL15-2 100 HCL15-2 100 3 pole HCL12-3 100 HCL15-3 100 HCL15-3 100 4 pole HCL12-4 100 HCL15-4 100 HCL15-4 100 12 pole HCL12-12 25 HCL15-12 25 HCL15-12 25 Marking Plates Blank BS60E 25 – – – – No. 1-12 BS60EM1-12 25 – – – – No. 13-24 BS60EM13-24 25 – – – – Isolation Partition HEP4/6H 5 – – – – Mounting Pins H6 50 – – – – HE6H DIMENSIONS HE10H DIMENSIONS HE16H DIMENSIONS 12 mm 15 mm M3.5 M4 15 mm M5 7.7 mm 4.3 mm Ø6.3 mmØ4.2 M3.5 9.5 mm 9.3 mm 5.7 mm Ø8.2 Ø4.5M4 11.3 mm 9.3 mm 5.7 mm Ø8.Ø24.5 M5 11.3 mm m 9 mm 13.9 mm 21.8 mm 10.7 mm 17.5 mm 27.8 mm 15 mm 10.7 m 17.5 mm 16 mm 27.8 mm 12 mm Ø4.1 15.0 mm 15 mm Ø5 mm 25.1 mm L Ø5.6 mm 25.1 mm L 22.6 mm L 25.1 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 99

EUROSTRIPS® PLUGGABLE PANEL MOUNT FLAT BASE - 300V TERMINAL STRIPS HE42ST HE42BU HIGHLIGHTS FEATURES Dimensions & Weight •Plug & Socket Pitch Spacing 10 mm 10 mm • Cost effective reliable Weight per piece (12 pole) 30.6 g 30.4 g wire-to-wire solution • Technical Data/Ratings Easy to use double-row terminal strips Approvals • Panel mount or free float • Finger safe metal parts E211022 60998-2-1 E211022 60998-2-1 • Wire Size (solid / stranded) 24-10 AWG 2.5-4 mm2 24-10 AWG 2.5-4 mm2 Wire protector • Voltage Rating 300 V 400 V 300 V 400 V easy to cut to required pole configuration Current Rating 20 A 10 A 20 A 10 A • •Pre cut version in stock Torque 7.0 lb-in 0.4 Nm 7.0 lb-in 0.4 Nm 300V / 600V up to 63A • Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 Color: white Insert Material Tinned Brass Tinned Brass APPLICATIONS Terminal Screw Material Blue Chromated Steel Blue Chromated Steel • Installation Instructions HVAC • •Appliances Wire Stripping Length 7 mm 6 mm Equipment • Mounting Hole Diameter 3.0 mm 3.6 mm Power Distribution • Terminal Screw Size M2.6 M3 Junction Boxes • Cost effective alternative Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. to barrier strips 2 pole HE42ST/02 16.4 mm 100 HE42BU/02 16.4 mm 100 3 pole HE42ST/03 26.4 mm 100 HE42BU/03 26.4 mm 100 4 pole HE42ST/04 36.4 mm 100 HE42BU/04 36.4 mm 100 5 pole HE42ST/05 46.4 mm 100 HE42BU/05 46.4 mm 100 6 pole HE42ST/06 56.4 mm 50 HE42BU/06 56.4 mm 50 7 pole HE42ST/07 66.4 mm 50 HE42BU/07 66.4 mm 50 8 pole HE42ST/08 76.4 mm 50 HE42BU/08 76.4 mm 50 9 pole HE42ST/09 86.4 mm 50 HE42BU/09 86.4 mm 50 10 pole HE42ST/10 96.4 mm 50 HE42BU/10 96.4 mm 50 11 pole HE42ST/11 106.4 mm 50 HE42BU/11 106.4 mm 50 12 pole HE42ST/12 116.4 mm 50 HE42BU/12 116.4 mm 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL10-2 100 HCL10-2 100 3 pole HCL10-3 100 HCL10-3 100 4 pole HCL10-4 100 HCL10-4 100 12 pole HCL10-12 25 HCL10-12 25 Marking Plates Blank BS24E 25 BS24E 25 No. 1-12 BS24EM1-12 25 BS24EM1-12 25 No. 13-24 BS24EM13-24 25 BS24EM13-24 25 HE42ST DIMENSIONS HE42BU DIMENSIONS 6.4 mm [0.252 in] 10 mm [30..6154 4m imn] [0.394 in] [01.309 m4 min] M3 M3 [02..160 m2 min] [0Ø.131 m8 min] [01.03 9m4m in] [06..24[50 3m2..1 5mi4n m0] min] M[oØu0nØ.t1i3n4.g62 Hino]le M3 Ø5.7 mm [05..272 m4 min] M3 [0.224 in] 3.2 mm [0.126 in] 14.9 mm 7.9 mm [0.587 in] [70..7350 5m imn] [105.5 m9 min] 10 mm Ø3.6 [0.311 in] 20 mm [0.394 in] [Ø0.142 in] [0.787 in] [ØØ03..153 m8 min] [01.03 9m4m in] [02.39 1m imn] L L (All dimensions are shown in mm, to convert to inches please divide by 25.4) 100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® PLUGGABLE PANEL MOUNT STANDOFF FEET - 600V TERMINAL STRIPS HE42SST HE42SBU Dimensions & Weight Pitch Spacing 10 mm 10 mm Weight per piece (12 pole) 30.6 g 30.4 g Technical Data/Ratings Approvals E211022 60998-2-1 E211022 60998-2-1 Wire Size (solid / stranded) 24-10 AWG 2.5-4 mm2 24-10 AWG 2.5-4 mm2 Voltage Rating 600 V 500 V 600 V 500 V Current Rating 20 A 10 A 20 A 10 A Torque 7.0 lb-in 0.4 Nm 7.0 lb-in 0.4 Nm Insulation Material Polyamide 66/6 V0 Polyamide 66/6 V0 Insert Material Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel Installation Instructions Wire Stripping Length 7 mm 6 mm Mounting Hole Diameter 3.0 mm 3.6 mm Terminal Screw Size M3.5 M4 Terminal Strips Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. 2 pole HE42SST/02 16.4 mm 100 HE42SBU/02 16.4 mm 100 3 pole HE42SST/03 26.4 mm 100 HE42SBU/03 26.4 mm 100 4 pole HE42SST/04 36.4 mm 100 HE42SBU/04 36.4 mm 100 5 pole HE42SST/05 46.4 mm 100 HE42SBU/05 46.4 mm 100 6 pole HE42SST/06 56.4 mm 50 HE42SBU/06 56.4 mm 50 7 pole HE42SST/07 66.4 mm 50 HE42SBU/07 66.4 mm 50 8 pole HE42SST/08 76.4 mm 50 HE42SBU/08 76.4 mm 50 9 pole HE42SST/09 86.4 mm 50 HE42SBU/09 86.4 mm 50 10 pole HE42SST/10 96.4 mm 50 HE42SBU/10 96.4 mm 50 11 pole HE42SST/11 106.4 mm 50 HE42SBU/11 106.4 mm 50 12 pole HE42SST/12 116.4 mm 50 HE42SBU/12 116.4 mm 50 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers 2 pole HCL10-2 100 HCL10-2 100 3 pole HCL10-3 100 HCL10-3 100 4 pole HCL10-4 100 HCL10-4 100 12 pole HCL10-12 25 HCL10-12 25 Marking Plates Blank BS24E 25 BS24E 25 No. 1-12 BS24EM1-12 25 BS24EM1-12 25 No. 13-24 BS24EM13-24 25 BS24EM13-24 25 HE42SST DIMENSIONS HE42SBU DIMENSIONS 6.4 mm 10 mm [0[3.02..651524 4min i]mn] [01.309 m4 min] [0.394 in M3 M3 3.5 mm Ø3.6 [0.140 in] [Ø0.142 in] [02..160 m2 min] [0Ø.131 m8 min] 5.7 [m01.m309 m4 min] M3 [06..245 m2 min] Mounting HØ[o05l.e.272 m4 min M3 [0.224 in] 6.7 mm [0.264 in] 19.1 mm [101.4.55 3m imn] [108.7.52 8m imn] [102.4.17 7m imn] [0.752 in] [ØØ03..153 m8 min] [01.309 m4 min] [02.39 1m imn] [01.03 9m4m in [Ø0.Ø134.26 in] [1024.50.05 m 1m mimn] L L [0.787 in] (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 101

EUROSTRIPS® TERMINAL STRIP 300V - CENTER BARRIER / WIRE PROTECTOR TERMINAL STRIPS ATS1.5 ATS2.5 ATS6 HIGHLIGHTS FEATURES Dimensions & Weight •Center Barrier / Wire Protector Pitch Spacing 8 mm 10 mm 12 mm •300V/600V Weight per piece (12 pole) 22 g 34 g 44 g up to 63A • Cost effective reliable Technical Data/Ratings wire-to-wire solution • Approvals Easy to use double-row •terminal strips E496554 60947-7-1 E496554 60947-7-1 E496554 60947-7-1 Panel mount or free float Wire Size (solid / stranded) 22-12 AWG 22-16 AWG0.2-1.5 mm2 22-10 AWG 18-12 AWG 0.2-4 mm2 20-8 AWG 18-10 AWG 0.2-6 mm2 • Finger safe metal parts Voltage Rating 300 V 300 V 400 V 300 V 300 V 400 V 300 V 300 V 400 V • •Wire protector Current Rating 20 A 15 A 15 A 30 A 30 A 26 A 40 A 40 A 44 A easy to cut to required pole Torque 4.4 lb-in 0.5 Nm 5.3 lb-in 0.5 Nm 7 lb-in 0.5 Nm configuration • Pre cut version in stock Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 • Color: translucent white Insert Material Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Terminal Screw Material Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel APPLICATIONS • Installation Instructions HVAC • Wire Stripping Length 5 mm (0.2 in.) 6 mm (0.24 in.) 7 mm (0.28 in.) Appliances • Equipment Mounting Hole Diameter 2.8 mm 3.5 mm 4.4 mm • •Power Distribution Terminal Screw Size M2.5 M3 M3.5 Junction Boxes • Terminal Blocks Cat. No. Type L (mm) Pk. Cat. No. Type L (mm) Pk. Cat. No. Type L (mm) Pk. Cost effective alternative to barrier strips 2 pole 40.002 ATS1.5/2 13.6 mm 100 40.202 ATS1.5/2 17.0 mm 100 40.402 ATS1.5/2 20.0 mm 100 3 pole 40.003 ATS1.5/3 21.5 mm 100 40.203 ATS1.5/3 27.0 mm 100 40.403 ATS1.5/3 32.0 mm 100 4 pole 40.004 ATS1.5/4 29.5 mm 100 40.204 ATS1.5/4 37.0 mm 100 40.404 ATS1.5/4 44.0 mm 100 5 pole 40.005 ATS1.5/5 37.4 mm 100 40.205 ATS1.5/5 47.0 mm 100 40.405 ATS1.5/5 56.0 mm 100 6 pole 40.006 ATS1.5/6 45.4 mm 50 40.206 ATS1.5/6 57.0 mm 50 40.406 ATS1.5/6 68.0 mm 50 7 pole 40.007 ATS1.5/7 53.3 mm 50 40.207 ATS1.5/7 67.0 mm 50 40.407 ATS1.5/7 80.0 mm 50 8 pole 40.008 ATS1.5/8 61.3 mm 50 40.208 ATS1.5/8 77.0 mm 50 40.408 ATS1.5/8 92.0 mm 50 9 pole 40.009 ATS1.5/9 69.2 mm 50 40.209 ATS1.5/9 87.0 mm 50 40.409 ATS1.5/9 104.0 mm 50 10 pole 40.010 ATS1.5/10 77.2 mm 50 40.210 ATS1.5/10 97.0 mm 50 40.410 ATS1.5/10 116.0 mm 50 11 pole 40.011 ATS1.5/11 85.1 mm 50 40.211 ATS1.5/11 107.0 mm 50 40.411 ATS1.5/11 128.0 mm 50 12 pole 40.012 ATS1.5/12 93.0 mm 50 40.212 ATS1.5/12 117.0 mm 50 40.412 ATS1.5/12 140.0 mm 50 Center Barrier Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Wire Protector External Jumpers HCL8-2 100 HCL10-2 100 HCL12-2 100 HCL8-3 100 HCL10-3 100 HCL12-3 100 HCL8-4 100 HCL10-4 100 HCL12-4 100 HCL8-12 25 HCL10-12 25 HCL12-12 25 Marking Plates – – BS24E 25 BS60E 25 – – BS24EM1-12 25 BS60EM1-12 25 – – BS24EM13-24 25 BS60EM13-24 25 ATS1.5 DIMENSIONS ATS2.5 DIMENSIONS ATS6 DIMENSIONS 8 mm 10 mm 12.0 mm M3 M3.5 M2.5 5.6 mm 2.4 mm Ø2.8 mm 3.5 mm Ø3.5 mm 4.3 mm Ø4.4 mm Mounting Hole Mounting Hole 6.4 mm 7.6 mm Ø5.4 mm M2.5 7.5 mm Ø5.7 mm M3 9.5 mm Ø6.8 mm M3.5 9.5 mm 8 mm Ø3 mm 2.5 mm 6.7 mm 18.2 mm 13.7 mm 10 mm Ø3.6 mm 3.0 mm 8.0 mm 21.8 mm 15.5 mm 12 mm L Ø4.2 mm 4.3 mm 9.0 mm 23.0 mm 17.7 mm L L ((AAllll ddiimmeennssiioonnss aarree sshhoowwnn iinn mmmm,, ttoo ccoonnvveerrtt ttoo iinncchheess pplleeaassee ddiivviiddee bbyy 2255..44)) 102 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® TERMINAL STRIP 600V - CENTER BARRIER / WIRE PROTECTOR ATSF1.5 ATSF2.5 ATSF6 ATSF16 Dimensions & Weight Pitch Spacing 8 mm 10 mm 12 mm 15 mm Weight per piece (12 pole) 30 g 36 g 50 g 98 g Technical Data/Ratings Approvals E496554 60947-7-1 E496554 60947-7-1 E496554 60947-7-1 E496554 60947-7-1 Wire Size (solid / stranded) 22-12 AWG 22-16 AWG0.2-1.5 mm2 22-10 AWG 18-12 AWG 0.2-4 mm2 20-8 AWG 18-10 AWG 0.2-6 mm2 14-6 AWG 18-6 AWG 0.2-16 mm2 Voltage Rating 600 V 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 600 V 800 V Current Rating 20 A 15 A 15 A 30 A 30 A 26 A 40 A 40 A 44 A 63 A 65 A 82 A Torque 4.4 lb-in 0.5 Nm 5.3 lb-in 0.6 Nm 7 lb-in 0.8 Nm 20 lb-in 2.25 Nm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Insert Material Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Nickel Plated Copper Alloy Terminal Screw Material Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel Installation Instructions Wire Stripping Length 5 mm (0.2 in.) 6 mm (0.24 in.) 7 mm (0.28 in.) 8 mm (0.32 in.) Mounting Hole Diameter 2.8 mm 3.5 mm 4.4 mm 4.2 mm Terminal Screw Size M2.5 M3 M3.5 M5 Terminal Blocks Cat. No. Type L (mm) Pk. Cat. No. Type L (mm) Pk. Cat. No. Type L (mm) Pk. Cat. No. Type L (mm) Pk. 2 pole 40.102 ATSF1.5/2 13.6 100 40.302 ATSF2.5/2 17.0 100 40.502 ATSF6/2 20.0 100 40.702 ATSF16/2 25.0 40 3 pole 40.103 ATSF1.5/3 21.5 100 40.303 ATSF2.5/3 27.0 100 40.503 ATSF6/3 32.0 100 40.703 ATSF16/3 40.0 40 4 pole 40.104 ATSF1.5/4 29.5 100 40.304 ATSF2.5/4 37.0 100 40.504 ATSF6/4 44.0 100 40.704 ATSF16/4 55.0 40 5 pole 40.105 ATSF1.5/5 37.4 100 40.305 ATSF2.5/5 47.0 100 40.505 ATSF6/5 56.0 100 40.705 ATSF16/5 70.5 40 6 pole 40106 ATSF1.5/6 45.4 50 40.306 ATSF2.5/6 57.0 50 40.506 ATSF6/6 68.0 50 40.706 ATSF16/6 86.0 20 7 pole 40107 ATSF1.5/7 53.3 50 40.307 ATSF2.5/7 67.0 50 40.507 ATSF6/7 80.0 50 40.707 ATSF16/7 101.0 20 8 pole 40.108 ATSF1.5/8 61.3 50 40.308 ATSF2.5/8 77.0 50 40.508 ATSF6/8 92.0 50 40.708 ATSF16/8 116.0 20 9 pole 40.109 ATSF1.5/9 69.2 50 40.309 ATSF2.5/9 87.0 50 40.509 ATSF6/9 104.0 50 40.709 ATSF16/9 131.0 10 10 pole 40.110 ATSF1.5/10 77.2 50 40.310 ATSF2.5/10 97.0 50 40.510 ATSF6/10 116.0 25 40.710 ATSF16/10 146.0 10 11 pole 40111 ATSF1.5/11 85.1 50 40.311 ATSF2.5/11 197.0 50 40.511 ATSF6/11 128.0 25 40.711 ATSF16/11 161.0 10 12 pole 40112 ATSF1.5/12 93.0 50 40.312 ATSF2.5/12 117.0 50 40.512 ATSF6/12 140.0 25 40.712 ATSF16/12 176.0 10 Accessories Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. External Jumpers HCL8-2 100 HCL10-2 100 HCL12-2 100 HCL15-2 100 HCL8-3 100 HCL10-3 100 HCL12-3 100 HCL15-3 100 HCL8-4 100 HCL10-4 100 HCL12-4 100 HCL15-4 100 HCL8-12 25 HCL10-12 25 HCL12-12 25 HCL15-12 25 Isolation Partition – – HEP4/6H 5 HEP4/6H 5 – – Mounting Pins – – H4 50 H6 50 – – Marking Plates – – BS24E 25 BS60E 25 BS1016E 25 – – BS24EM1-12 25 BS60EM1-12 25 BS1016EM1-12 25 – – BS24EM13-24 25 BS60EM13-24 25 BS1016EM13-24 25 ATSF1.5 DIMENSIONS ATSF2.5 DIMENSIONS ATSF6 DIMENSIONS ATSF16 DIMENSIONS 10 mm 12 mm 15.1 mm 8 mm M3 M3.5 M5 M2.5 5.6 mm 2.4 mm MoØu2n.t8in mg mHole 6.4 mm 3.5 mm MoØu3n.t5in mg mHole 7.6 mm 4.3 mm Ø4.4 mm 9.6 mm 5.4 mm Ø4.2 mm Ø5.35 mm M2.6 7.5 mm Ø5.7 mm M3 9.5 mm Ø6.8 mm M3.5 9.6 mm Ø8 mm M5 11 mm m 8 mm L Ø3 mm 6.1 mm 10.1 mm 1182.2 m mmm 17 mm 10 mm L Ø3.6 mm mm 4.7 mm 21 2124. 3m mmm mm 4.91 12 mm L Ø4.2 mm 8.5 mm 12.5 mm 1253..80 mmmm 20.9 mm 15.1 mm L Ø6 mm 10.4 m 16.5 mm 1256..13 mmmm 25.8 mm (All dimensions are shown in mm, to convert to inches please divid(eA bll yd i2m5e.4n)sions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 103

EUROSTRIPS® ACCESSORIES TERMINAL STRIPS HIGHLIGHTS EXTERNAL JUMPERS EXTERNAL JUMPERS • Bus potential between poles on terminal Strips • Technical Information Eliminates Wire Jumpers • Less wiring Time External Jumper HCL8 HCL10 HCL12 HCL15 • Material: Eurostrip HE1, HE1H HE4, HE4HN HE6, HE6H HE10, HE16, HE10H, HE16H Copper Alloy nickel plated Pole Spacing 8 mm (0.315 in.) 10 mm (0.394 in.) 12 mm (0.472 in.) 15 mm (0.591 in.) (pins) Polyamide 66 (Insulation) Ordering • Color: Black Information Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. Cat. No. Length Std. Pk. ISOLATION PARTITION 2 pole HCL8-2 12 mm 100 HCL10-2 15 mm 100 HCL12-2 18 mm 100 HCL15-2 20 mm 100 • 3 pole HCL8-3 20 mm 100 HCL10-3 25 mm 100 HCL12-3 30 mm 100 HCL15-3 35 mm 100 Separation between 4 pole HCL8-4 28 mm 100 HCL10-4 35 mm 100 HCL12-4 42 mm 100 HCL15-4 50 mm 100 adjectant poles of different 12 pole HCL8-12 92 mm 25 HCL10-12 115 mm 25 HCL12-12 138 mm 25 HCL15-12 170 mm 25 potentials • Visual separation of poles • Better circuit Identification HCL8 HCL10 HCL12 HCL15 • Increasing wiring efficiency • •MCoaltoerr:i abll:a Pcoklyamide 66 6 mm 16 mm 16 mm 17 mm 1 3 mm 6.5 mm 3 mm 6.5 mm 3 mm 8 mm 42 mmmm 6 mm mm 5 mm5 mm 3 mm 6 mm6 mm 3 mm 6 mm9 mm 3 mm 3 4 mm L L L L ISOLATION PARTITIONS For Eurostrip HE4HN, HE6H, TSF2.5, TSF6 Cat. No. Dimensions Std. Pk. HEP4/16H 27 x 18.5 x 3.4 mm 5 (All dimensions are shown in mm, to convert to inches please divide by 25.4) 104 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

EUROSTRIPS® ACCESSORIES MOUNTING PINS HIGHLIGHTS MOUNTING PINS • Technical Information Faster Panel Mounting with snap-on mounting pins Mounting Pins H4 H6 • Installation Eurostrip Type HE4HN HE6H 1) Insert Pin through Panel Thickness 0.5-1.5 mm 0.8-1.8 mm drilled hole 2) Position Eurostrip on Drill Hole Size Ø4.2 mm Ø5.2mm mounting pin Ordering Information Cat. No. Std. Pk. Cat. No. Std. Pk. 3) Snap Eurostrip onto H4 50 H6 50 •Mounting Pins Use 2 or more pins per Eurostrip • Material: Polycarbonate MARKING PLATES • Install Mounting Plate 21 mm 12.6 mm 24 mm 14.7 mm • under or on top of Eurostrip Easy identification of individual pole positions Ø 4.2 mm Ø 5.2 mm for more wiring efficiency • 8.5 mm 11 mm • Less installation time Blank marking plates for hand-marking • Imprinted Marking Plates MARKING PLATES (No. 1-12, 13-24) • Material: PVC • Color: white with black imprint Imprinting • Mark individual pole positions • Marking saves installation Dimensions & Weight Time • Marking on turret location Eurostrip Type HE4, HE4HN HE6, HE6H HE10, HE10H, HE16, HE16H • Consecutive, identical or custom imprints • Ordering Information Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. • Specify imprinting in part# Imprint: black ink, Blank BS24E 25 BS60E 25 BS1016E 25 rub-resistant 1-12 BS24EM1-12 25 BS60EM1-12 25 BS1016EM1-12 25 • 13-24 BS24EM13-24 25 BS60EM13-24 25 BS1016EM13-24 25 500pcs MOQ IMPRINTING Imprint Example Order Examples Ordering Information Cat. No. Std. Pk. Consecutive 1-6 HE10HWPR/06/1-6 500 Consecutive 8-1 HE1WPR/08/8-1 500 Identical HE6WPR/12/1 500 HE10HWPR/06/1-6 For custom imprints please contact Altech. (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 105

ACCESSORIES DIN RAIL DIN RAIL & MOUNTING DIN35 x 7.5 DIN35 x 15 HIGHLIGHTS FEATURES • Altech DIN Rails comply with DIN EN60715, EN50022, 35 mm x 35 mm x EN50035, EN50045 7.5 mm deep 15 mm deep standards • Zinc Plated Steel Zinc Plated Steel Easy mounting of terminal blocks, power supplies and Type Cat. No. Length Std. Pk. Type Cat. No. Length Std. Pk. other control components Perforated 2511120 2m 20 Perforated CA701-15/S-2M 2m 20 and devices into panel • 2511120/1M 1m 40 CA701-15/S 1m 40 Space saving • Reduces labor Unperforated 2511110 2m 20 Unperforated CA701-15-2M 2m 20 • 35mm, 32mm and 15mm 2511110/1M 1m 40 CA701-15 1m 40 versions • 1m and 2m standard length Stainless Steel • Custom length available Type Cat. No. Length Std. Pk. • Perforated, unperforated Perforated 2511125 2m 20 MATERIAL 2511125/1M 1m 40 •Zinc-plated steel • Unperforated 2511115 2m 20 35x7.5mm • 2511115/1M 1m 40 35x15mm • •32mm Aluminum •Alum15inmumm Type Cat. No. Length Std. Pk. • Perforated 2511121 2m 20 35x7.5mm •Stainless Steel 2511121/1M 1m 40 (Type AISI 304) • Unperforated 2511111 2m 20 35x7.5mm 2511111/1M 1m 40 Dimensions Preforated Steel and Stainless Preforated Steel 18 18 Preforated Aluminum Unpreforated Steel 25.4 12.7 4.6 Unpreforated Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES DIN RAIL DIN RAIL & MOUNTING DIN32 DIN15 32 mm x 15 mm x 15 mm deep 5.5 mm deep Zinc Plated Steel Zinc Plated Steel Type Cat. No. Length Std. Pk. Type Cat. No. Length Std. Pk. Perforated 2511160 2m 10 Perforated CA601/S 2m 20 2511160/1M 1m 20 Unperforated 2511150 2m 10 2511150/1M 1m 20 Dimensions Preforated Steel Preforated Steel 18 Unpreforated Steel SUPPORT BRACKETS UNIVERSAL DIN CLIPS CA603 TSTW D35CLIP Ø7mm (.28in) M6 M6 18mm (.71in) 48mm H (1.89in) Ø6mm (.24 in.) Slot 6x15mm (.24x.59 in.) 6074mmmm ( 2(2.3.961inin)) 7542mmmm(2(2.9.085 i nin.).) 18mm(.71in.) Cat. No. Std. Pk. Cat. No. Height Std. Pk. Cat. No. Mounting Hole Std. Pk. CA603 25 CA703 1 in. 25 D35CLIP-M4 M4 100 CA803 2 in. 25 D35CLIP-M5 M5 100 CA903 3 in. 25 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES MOUNTING ACCESSORIES DIN RAIL & MOUNTING HIGHLIGHTS SUPPORT BRACKETS CA603 TSTW SUPPORT BRACKETS Ø7mm (.28in) M6 • Elevate DIN Rail away M6 18mm • from panel 48mm (.71in) H Easier mounting of (1.89in) Ø6mm components (.24 in.) • Slot 6x15mm Suitable for all mounting rails (.24x.59 in.) • •• I4vni5sc°irb evilaeitsrysei owni rfionrg imacpcreosvsed 6074mmmm ( 2(2.3.961inin)) 7542mmmm(2(2.9.085 i nin.).) 18mm(.71in.) Straight brackets available Cat. No. Std. Pk. Cat. No. Height Std. Pk. in 3 heights: • CA603 25 CA703 1 in. 25 1” • 2” CA803 2 in. 25 • 3” CA903 3 in. 25 MOUNTING • UNIVERSAL DIN CLIPS Brackets mount with 2 screws to any panel or flat D35CLIP CMTB35 CA902 surface • Tapped center hole for DIN Rail mounting MATERIAL Ø 4.3 x 4 • 25.4 Zinc-plated yellow 18 14.5 chromated Steel Ø 5.5 x 2 58 UNIVERSAL DIN CLIPS • Clips on to any 35mm/32mm DIN Rail Cat. No. Mounting Hole Std. Pk. Cat. No. Mounting Hole Std. Pk. Cat. No. Std. Pk. • •Flexible mounting solution D35CLIP-M4 M4 100 CMTB35 2x4.4 mm 50 CA902 100 Mount any component on D35CLIP-M5 M5 100 2x5.5 mm 32mm/35mm DIN Rail • Various mounting hole solutions SPACER • Material: zinc-plated steel, CASP CDL4U SPACER Polyamide 66 SPACER • Increases creepage and clearance distance between terminal blocks • Segregate different groups of terminal blocks Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. WARNING LABELS CASP 29 x 43 x 8 mm 50 CDL4USP 54 x 55.5 x 6 mm 50 • Mounted on top of terminal block for visual identification • WARNING LABELS Make entire terminal block assembly shock-proof Cat. No. Terminal Blocks Std. Pk. Pack Strips Tags WLX2.5 CX2.5 Series, CXDL2.5, CXK2.5, CXM2.5 1 20 100 WLX4 CX4 Series, CXF Series, CXK4 1 20 100 WLX6 CX6 Series, CXDB Series 1 20 100 WLX10 CX10 Series 1 20 100 SWL4 CTS4U-N, CDB4, CMDB4 1 20 100 SWL10 CTS6U, CDB6U, CMDB6 1 20 100 108 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES END STOPS END STOPS Selection Table HIGHLIGHTS DIN Rail Type CA102 CA202 CA702 CA802 CA103 CA602 CA302 CA402 CA502 35x7.5mm DIN Rail ¸ ¸ ¸ ¸ ¸ ¸ MOUNTING PINS • 35x15mm DIN Rail ¸ ¸ ¸ ¸ ¸ ¸ End Stops prevent Ter- minal Blocks and other 32mm DIN Rail ¸ ¸ ¸ DIN Rail components from moving on the rail 15mm DIN Rail ¸ • Versions for • 35x7.5mm Rail • 35x15mm Rail POLYAMIDE 66 • 32mm Rail • 15mm Rail • CA702 CA802 CA202 Heavy Duty End stop CA102 CA202 , • Screwless End Stop CA103 (snap on) • Material: • Polyamide • Steel Heavy Duty End Stop Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA702 34 x 44 x 9mm 50 CA802 32 x 45 x 8mm 50 CA202 44.5 x 50 x 9.5mm 50 CA102 CA103 CA602 Screwless Snap-On Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA102 46 x 50 x 9mm 50 CA103 41 x 35 x 6mm 50 CA602 20 x 28 x 8mm 50 STEEL CA302 CA402 CA502 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA302 27 x 39.5 x 16mm 50 CA402 27 x 39.5 x 16mm 50 CA502 25 x 22.5 x 11.5mm 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 109

ACCESSORIES GROUP MARKERS MARKING HIGHLIGHTS DIN RAIL MOUNT GMH6 GMH7 FEATURES • Group identification • MT8 Holders fit standard marking tags • GMH6, GMH7 mounted directly on DIN Rail • GMH1, GMH2, GMH3, GMH4, GMH5, GMH8 mounted on End Stops • MT1G, MT2G, can be used with all these holders or can be directly Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. mounted on all end stops • GMH6 46.5 x 44.5 x 9.5mm 50 GMH7 46.5 x 44.5 x 19.5mm 50 Material: Polyamide 66 MOUNT ON END STOP GMH1 GMH4 GMH5 Suitable for Suitable for Suitable for CA602 CA802 CA702 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. GMH1 15.8 x 14.6 x 8mm 100 GMH4 16.2 x 14 x 8mm 100 GMH5 13.7 x 14 x 8mm 100 GMH2 / GMH3 GMH8 / GMH8N MTG1 / MTG2 Suitable for Suitable for Mountable CA702 (GMH2) CA103 on all End Clamps CA802 (GMH3) Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. GMH2 23.2 x 14 x 8mm 100 GMH8 44.65 x 31.10 x 10mm 100 MTG1 4.3 x 34 x 17.8mm 50 GMH3 23 x 14 x 8mm 100 GMH8N 44.65 x 31.10 x 6mm 100 MTG2 4.3 x 34 x 8mm 50 TM5 Suitable for CXDL Series Cat. No. Dimensions Std. Pk. TM5 38 x 17 x 5mm 50 110 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES MARKING TAGS MARKING •Cost Effective MT marking system for quick and •Blank Marking Tags for customer marking accurate identification •Order with horizontal/ vertical imprint •Push-On Tags fit all Altech DIN Rail mount •Standard imprints with consecutive or identical terminal blocks numbers/ characters •Inserted individually or as strips of 10 •Custom imprint with short lead time •Quick and easy marking •Supplied in packs of 100 tags/ 10 strips BLANK MARKING TAGS Cat No./ Standard Packs Dimensions Type Pack Strips Tags H W MT2 1 10 100 4.9mm 5.8mm W MT3 1 20 100 5.0mm 10.0mm MT4 1 10 100 5.0mm 4.8mm H Blank Marking Tag MT5 1 10 100 9.5mm 4.5mm MT6 1 10 100 9.5mm 5.6mm MT8 1 10 100 10.5mm 7.5mm MT9 1 10 100 10.3mm 8.7mm MT10 1 20 100 10.4mm 9.5mm MT12 1 20 100 10.4mm 11.4mm Horizontal Imprint MT16 1 20 100 10.5mm 15.4mm MT2G 1 10 100 5.0mm 5.0mm MT2B4 1 10 100 5.8mm 9.1mm Continuous Tags MT6F 1 10 10 9.5mm 60.0mm MT9F 1 10 10 10.3mm 90.0mm Vertical Imprint HOW TO ORDER IMPRINTED MARKING TAGS IMPRINT EXAMPLES FOR MT6 HORIZONTAL VERTICAL Imprint Cat. No. Imprint Cat. No. Imprint Cat. No. Imprint Cat. No. 1 MT6/H-1 131-140 MT6/H-131-140 1 MT6/V-1 131-140 MT6/V-131-140 2 MT6/H-2 141-150 MT6/H-141-150 2 MT6/V-2 141-150 MT6/V-141-150 3 MT6/H-3 151-160 MT6/H-151-160 3 MT6/V-3 151-160 MT6/V-151-160 4 MT6/H-4 161-170 MT6/H-161-170 4 MT6/V-4 161-170 MT6/V-161-170 5 MT6/H-5 171-180 MT6/H-171-180 5 MT6/V-5 171-180 MT6/V-171-180 6 MT6/H-6 181-190 MT6/H-181-190 6 MT6/V-6 181-190 MT6/V-181-190 7 MT6/H-7 191-200 MT6/H-191-200 7 MT6/V-7 191-200 MT6/V-191-200 8 MT6/H-8 1-100 MT6/H-1-100 8 MT6/V-8 1-100 MT6/V-1-100 9 MT6/H-9 1-50 MT6/H-1-50 9 MT6/V-9 1-50 MT6/V-1-50 10 MT6/H-10 A MT6/H-A 10 MT6/V-10 A MT6/V-A 1-10 MT6/H-1-10 B MT6/H-B 1-10 MT6/V-1-10 B MT6/V-B 11-20 MT6/H-11-20 C MT6/H-C 11-20 MT6/V-11-20 C MT6/V-C 21-30 MT6/H-21-30 L1 MT6/H-L1 21-30 MT6/V-21-30 L1 MT6/V-L1 31-40 MT6/H-31-40 L2 MT6/H-L2 31-40 MT6/V-31-40 L2 MT6/V-L2 41-50 MT6/H-41-50 L3 MT6/H-L3 41-50 MT6/V-41-50 L3 MT6/V-L3 51-60 MT6/H-51-60 N MT6/H-N 51-60 MT6/V-51-60 N MT6/V-N 61-70 MT6/H-61-70 R MT6/H-R 61-70 MT6/V-61-70 R MT6/V-R 71-80 MT6/H-71-80 S MT6/H-S 71-80 MT6/V-71-80 S MT6/V-S 81-90 MT6/H-81-90 X MT6/H-X 81-90 MT6/V-81-90 X MT6/V-X 91-100 MT6/H-91-100 Y MT6/H-Y 91-100 MT6/V-91-100 Y MT6/V-Y 101-110 MT6/H-101-110 Z MT6/H-Y 101-110 MT6/V-101-110 Z MT6/V-Y 111-120 MT6/H-111-120 Ground Symbol MT6/H-GRND 111-120 MT6/V-111-120 Ground Symbol MT6/V-GRND 121-130 MT6/H-121-130 121-130 MT6/V-121-130 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 111

ACCESSORIES MARKING SYSTEMS PLOTTERS & ENGRAVERS 112 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES MARKING SYSTEMS PLOTTERS PLOTTERS The Altech VP Series base unit is an auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The base unit is controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP Series enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of 10.5 mm. PLOTTER VP 600 BASIC PLOTTER VP 600 A3 Ordering Information Ordering Information Cat No. 34000082 Cat No. 34000080 • Professionally marking of connectors, wires, cables, • Basic features of plotter VP 600 Basic plus: equipment, cable ties, shrink tubing, labels and signs • Integrated and automated pen station. Holds 4 different of different sizes and materials, as well as customer- pens at the same time, for fast and frequently changing specific items. applications. • Manual insertion of plotter pen • Built-in pen priming function • Auto calibration • Automatic recognition system for marking fixture / • Universal Power Supply 100-240V AC plates ensures faster and easier handing of frequently • Control language HPGL changing marking applications. • Universal marking software (VarioSign) sold separately • Wide marking area 422 x 305 mm • Marking area 273 x 305 mm • Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm) • Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm) • Weight: 18.3 lbs. • Weight: 13.9 lbs. ACCESSORIES PLOTTER PENS ALTECH FIXTURES SOFTWARE VARIOSIGN Cat. No. Description Tip Size Cat. No. Description Cat. No. Description 35003018 Etching Plotter Pen (red) 0.18 mm 34902191 MT2G 34000022 Variosign Software 35003025 Etching Plotter Pen (white) 0.25 mm 34902081 MT2, MT3, MT4, MT2B4 35003035 Etching Plotter Pen (yellow) 0.35 mm 34902001 MT5, MT6, MT8, MT10, MT12, MT16 34902057 MT9 35003118 Non-Etching Plotter Pen (red) 0.18 mm 34902080 MTG1, MTG2 35003125 Non-Etching Plotter Pen (white) 0.25 mm * Fixtures for other Terminal Block Manufactures are available, 35003135 Non-Etching Plotter Pen (yellow) 0.35 mm please contact Altech for additional information. Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 113

ACCESSORIES MOUNTING ACCESSORIES DIN RAIL & MOUNTING HIGHLIGHTS SUPPORT BRACKETS CA603 TSTW SUPPORT BRACKETS Ø7mm (.28in) M6 • Elevate DIN Rail away M6 18mm • from panel 48mm (.71in) H Easier mounting of (1.89in) Ø6mm components (.24 in.) • Slot 6x15mm Suitable for all mounting rails (.24x.59 in.) • •• I4vni5sc°irb evilaeitsrysei owni rfionrg imacpcreosvsed 6074mmmm ( 2(2.3.961inin)) 7542mmmm(2(2.9.085 i nin.).) 18mm(.71in.) Straight brackets available Cat. No. Std. Pk. Cat. No. Height Std. Pk. in 3 heights: • CA603 25 CA703 1 in. 25 1” • 2” CA803 2 in. 25 • 3” CA903 3 in. 25 MOUNTING • UNIVERSAL DIN CLIPS Brackets mount with 2 screws to any panel or flat D35CLIP CMTB35 CA902 surface • Tapped center hole for DIN Rail mounting MATERIAL Ø 4.3 x 4 • 25.4 Zinc-plated yellow 18 14.5 chromated Steel Ø 5.5 x 2 58 UNIVERSAL DIN CLIPS • Clips on to any 35mm/32mm DIN Rail Cat. No. Mounting Hole Std. Pk. Cat. No. Mounting Hole Std. Pk. Cat. No. Std. Pk. • •Flexible mounting solution D35CLIP-M4 M4 100 CMTB35 2x4.4 mm 50 CA902 100 Mount any component on D35CLIP-M5 M5 100 2x5.5 mm 32mm/35mm DIN Rail • Various mounting hole solutions SPACER • Material: zinc-plated steel, CASP CDL4U SPACER Polyamide 66 SPACER • Increases creepage and clearance distance between terminal blocks • Segregate different groups of terminal blocks Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. WARNING LABELS CASP 29 x 43 x 8 mm 50 CDL4USP 54 x 55.5 x 6 mm 50 • Mounted on top of terminal block for visual identification • WARNING LABELS Make entire terminal block assembly shock-proof Cat. No. Terminal Blocks Std. Pk. Pack Strips Tags WLX2.5 CX2.5 Series, CXDL2.5, CXK2.5, CXM2.5 1 20 100 WLX4 CX4 Series, CXF Series, CXK4 1 20 100 WLX6 CX6 Series, CXDB Series 1 20 100 WLX10 CX10 Series 1 20 100 SWL4 CTS4U-N, CDB4, CMDB4 1 20 100 SWL10 CTS6U, CDB6U, CMDB6 1 20 100 108 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES END STOPS END STOPS Selection Table HIGHLIGHTS DIN Rail Type CA102 CA202 CA702 CA802 CA103 CA602 CA302 CA402 CA502 35x7.5mm DIN Rail ¸ ¸ ¸ ¸ ¸ ¸ MOUNTING PINS • 35x15mm DIN Rail ¸ ¸ ¸ ¸ ¸ ¸ End Stops prevent Ter- minal Blocks and other 32mm DIN Rail ¸ ¸ ¸ DIN Rail components from moving on the rail 15mm DIN Rail ¸ • Versions for • 35x7.5mm Rail • 35x15mm Rail POLYAMIDE 66 • 32mm Rail • 15mm Rail • CA702 CA802 CA202 Heavy Duty End stop CA102 CA202 , • Screwless End Stop CA103 (snap on) • Material: • Polyamide • Steel Heavy Duty End Stop Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA702 34 x 44 x 9mm 50 CA802 32 x 45 x 8mm 50 CA202 44.5 x 50 x 9.5mm 50 CA102 CA103 CA602 Screwless Snap-On Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA102 46 x 50 x 9mm 50 CA103 41 x 35 x 6mm 50 CA602 20 x 28 x 8mm 50 STEEL CA302 CA402 CA502 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. CA302 27 x 39.5 x 16mm 50 CA402 27 x 39.5 x 16mm 50 CA502 25 x 22.5 x 11.5mm 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 109

ACCESSORIES GROUP MARKERS MARKING HIGHLIGHTS DIN RAIL MOUNT GMH6 GMH7 FEATURES • Group identification • MT8 Holders fit standard marking tags • GMH6, GMH7 mounted directly on DIN Rail • GMH1, GMH2, GMH3, GMH4, GMH5, GMH8 mounted on End Stops • MT1G, MT2G, can be used with all these holders or can be directly Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. mounted on all end stops • GMH6 46.5 x 44.5 x 9.5mm 50 GMH7 46.5 x 44.5 x 19.5mm 50 Material: Polyamide 66 MOUNT ON END STOP GMH1 GMH4 GMH5 Suitable for Suitable for Suitable for CA602 CA802 CA702 Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. GMH1 15.8 x 14.6 x 8mm 100 GMH4 16.2 x 14 x 8mm 100 GMH5 13.7 x 14 x 8mm 100 GMH2 / GMH3 GMH8 / GMH8N MTG1 / MTG2 Suitable for Suitable for Mountable CA702 (GMH2) CA103 on all End Clamps CA802 (GMH3) Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. Cat. No. Dimensions Std. Pk. GMH2 23.2 x 14 x 8mm 100 GMH8 44.65 x 31.10 x 10mm 100 MTG1 4.3 x 34 x 17.8mm 50 GMH3 23 x 14 x 8mm 100 GMH8N 44.65 x 31.10 x 6mm 100 MTG2 4.3 x 34 x 8mm 50 TM5 Suitable for CXDL Series Cat. No. Dimensions Std. Pk. TM5 38 x 17 x 5mm 50 110 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES MARKING TAGS MARKING •Cost Effective MT marking system for quick and •Blank Marking Tags for customer marking accurate identification •Order with horizontal/ vertical imprint •Push-On Tags fit all Altech DIN Rail mount •Standard imprints with consecutive or identical terminal blocks numbers/ characters •Inserted individually or as strips of 10 •Custom imprint with short lead time •Quick and easy marking •Supplied in packs of 100 tags/ 10 strips BLANK MARKING TAGS Cat No./ Standard Packs Dimensions Type Pack Strips Tags H W MT2 1 10 100 4.9mm 5.8mm W MT3 1 20 100 5.0mm 10.0mm MT4 1 10 100 5.0mm 4.8mm H Blank Marking Tag MT5 1 10 100 9.5mm 4.5mm MT6 1 10 100 9.5mm 5.6mm MT8 1 10 100 10.5mm 7.5mm MT9 1 10 100 10.3mm 8.7mm MT10 1 20 100 10.4mm 9.5mm MT12 1 20 100 10.4mm 11.4mm Horizontal Imprint MT16 1 20 100 10.5mm 15.4mm MT2G 1 10 100 5.0mm 5.0mm MT2B4 1 10 100 5.8mm 9.1mm Continuous Tags MT6F 1 10 10 9.5mm 60.0mm MT9F 1 10 10 10.3mm 90.0mm Vertical Imprint HOW TO ORDER IMPRINTED MARKING TAGS IMPRINT EXAMPLES FOR MT6 HORIZONTAL VERTICAL Imprint Cat. No. Imprint Cat. No. Imprint Cat. No. Imprint Cat. No. 1 MT6/H-1 131-140 MT6/H-131-140 1 MT6/V-1 131-140 MT6/V-131-140 2 MT6/H-2 141-150 MT6/H-141-150 2 MT6/V-2 141-150 MT6/V-141-150 3 MT6/H-3 151-160 MT6/H-151-160 3 MT6/V-3 151-160 MT6/V-151-160 4 MT6/H-4 161-170 MT6/H-161-170 4 MT6/V-4 161-170 MT6/V-161-170 5 MT6/H-5 171-180 MT6/H-171-180 5 MT6/V-5 171-180 MT6/V-171-180 6 MT6/H-6 181-190 MT6/H-181-190 6 MT6/V-6 181-190 MT6/V-181-190 7 MT6/H-7 191-200 MT6/H-191-200 7 MT6/V-7 191-200 MT6/V-191-200 8 MT6/H-8 1-100 MT6/H-1-100 8 MT6/V-8 1-100 MT6/V-1-100 9 MT6/H-9 1-50 MT6/H-1-50 9 MT6/V-9 1-50 MT6/V-1-50 10 MT6/H-10 A MT6/H-A 10 MT6/V-10 A MT6/V-A 1-10 MT6/H-1-10 B MT6/H-B 1-10 MT6/V-1-10 B MT6/V-B 11-20 MT6/H-11-20 C MT6/H-C 11-20 MT6/V-11-20 C MT6/V-C 21-30 MT6/H-21-30 L1 MT6/H-L1 21-30 MT6/V-21-30 L1 MT6/V-L1 31-40 MT6/H-31-40 L2 MT6/H-L2 31-40 MT6/V-31-40 L2 MT6/V-L2 41-50 MT6/H-41-50 L3 MT6/H-L3 41-50 MT6/V-41-50 L3 MT6/V-L3 51-60 MT6/H-51-60 N MT6/H-N 51-60 MT6/V-51-60 N MT6/V-N 61-70 MT6/H-61-70 R MT6/H-R 61-70 MT6/V-61-70 R MT6/V-R 71-80 MT6/H-71-80 S MT6/H-S 71-80 MT6/V-71-80 S MT6/V-S 81-90 MT6/H-81-90 X MT6/H-X 81-90 MT6/V-81-90 X MT6/V-X 91-100 MT6/H-91-100 Y MT6/H-Y 91-100 MT6/V-91-100 Y MT6/V-Y 101-110 MT6/H-101-110 Z MT6/H-Y 101-110 MT6/V-101-110 Z MT6/V-Y 111-120 MT6/H-111-120 Ground Symbol MT6/H-GRND 111-120 MT6/V-111-120 Ground Symbol MT6/V-GRND 121-130 MT6/H-121-130 121-130 MT6/V-121-130 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 111

ACCESSORIES MARKING SYSTEMS PLOTTERS & ENGRAVERS 112 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

ACCESSORIES MARKING SYSTEMS PLOTTERS PLOTTERS The Altech VP Series base unit is an auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The base unit is controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP Series enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of 10.5 mm. PLOTTER VP 600 BASIC PLOTTER VP 600 A3 Ordering Information Ordering Information Cat No. 34000082 Cat No. 34000080 • Professionally marking of connectors, wires, cables, • Basic features of plotter VP 600 Basic plus: equipment, cable ties, shrink tubing, labels and signs • Integrated and automated pen station. Holds 4 different of different sizes and materials, as well as customer- pens at the same time, for fast and frequently changing specific items. applications. • Manual insertion of plotter pen • Built-in pen priming function • Auto calibration • Automatic recognition system for marking fixture / • Universal Power Supply 100-240V AC plates ensures faster and easier handing of frequently • Control language HPGL changing marking applications. • Universal marking software (VarioSign) sold separately • Wide marking area 422 x 305 mm • Marking area 273 x 305 mm • Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm) • Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm) • Weight: 18.3 lbs. • Weight: 13.9 lbs. ACCESSORIES PLOTTER PENS ALTECH FIXTURES SOFTWARE VARIOSIGN Cat. No. Description Tip Size Cat. No. Description Cat. No. Description 35003018 Etching Plotter Pen (red) 0.18 mm 34902191 MT2G 34000022 Variosign Software 35003025 Etching Plotter Pen (white) 0.25 mm 34902081 MT2, MT3, MT4, MT2B4 35003035 Etching Plotter Pen (yellow) 0.35 mm 34902001 MT5, MT6, MT8, MT10, MT12, MT16 34902057 MT9 35003118 Non-Etching Plotter Pen (red) 0.18 mm 34902080 MTG1, MTG2 35003125 Non-Etching Plotter Pen (white) 0.25 mm * Fixtures for other Terminal Block Manufactures are available, 35003135 Non-Etching Plotter Pen (yellow) 0.35 mm please contact Altech for additional information. Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 113

FERRULES INTRODUCTION Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Using ferrules offers several advantages: ELIMINATE CROSS SHORTING caused by unraveled stray wire strands. IMPROVE TERMINAL CONNECTIONS and reduce resistance by providing a solid surface at the point of connection. REDUCE INSTALLATION TIME by eliminating the need to dress loose wire strands and facilitating wire insertion into the terminal clamp. PREVENT CONDUCTOR BREAKAGE due to bending, wire stress or vibration. 114 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES Recommended Installation Procedure Cutting and stripping the wire The wire should be cut as squarely and evenly as possible, taking care to avoid angular cuts or damage to the conductor. The strip length of the insulation will depend on the barrel length of the ferrule and the out- side diameter of the wire. <.5 mm Ideally the wire insulation should be stripped to a length that allows the conductor end to reach flush to the tip of the ferrule, when inserted. The end of the conductor should not extend more than .5mm past the tip of the ferrule. After the insulation is stripped, the strands of the conductor should be dressed by slightly twisting them to insure that any stray strands are consolidated. The wire can then be inserted into the ferrule. The wire should be pushed in so that the insulation edge is fully covered by the plastic collar. The conductor should completely fill the metal tube and can extend up to .5mm past the tip. The ferrule and wire should be crimped with an appropriately sized ratcheted crimper. The ferrule should be inserted into the crimper die set and positioned so that only the metal tube is crimped. The crimping tool should be cycled completely to insure proper application. The finished installation should then be checked for any obvious flaws in processing. An occasional pull test should be preformed to check that the crimp tool is functioning properly. Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 115

FERRULES UL RECOGNIZED SINGLE INSULATED FERRULES Standard Packaging L Dimensions (mm) 2 HIGHLIGHTS AWG mm2 Barrel Length Industry Standard DIN Standard L1 L2 D1 S1 D2 S2 Std. (mm) color Cat. No. color Cat. No. Pack 26 0.14 6 grey FII2606 10 6 0.6 0.15 1.5 0.25 500 26 0.14 8 grey FII2608 12 8 0.6 0.15 1.5 0.25 500 FEATURES 24 0.25 6 light blue FII2406 10 6 0.85 0.15 1.8 0.25 500 24 0.25 8 light blue FII2408 12 8 0.85 0.15 1.8 0.25 500 Ferrules insure reliable 24 0.25 12 light blue FII2412 16 12 0.85 0.15 1.8 0.25 500 22 0.34 6 turquoise FII2206 10 6 0.85 0.15 2 0.25 500 electrical connections when 22 0.34 8 turquoise FII2208 12 8 0.85 0.15 2 0.25 500 terminating stranded flexi- 22 0.34 12 turquoise FII2212 16 12 0.85 0.15 2 0.25 500 ble wire in terminal blocks, 20 0.5 6 orange FII2006 white FID2006 12 6 1 0.15 2.6 0.25 500 20 0.5 8 orange FII2008 white FID2008 14 8 1 0.15 2.6 0.25 500 circuit breakers or other 20 0.5 10 orange FII2010 white FID2010 16 10 1 0.15 2.6 0.25 500 control devices. Insulated 20 0.5 12 orange FII2012 white FID2012 18 12 1 0.15 2.6 0.25 500 18 0.75 6 white FII1806W grey FID1806GR 12 6 1.2 0.15 2.8 0.25 500 ferrules prevent conductor 18 0.75 8 white FII1808W grey FID1808GR 14 8 1.2 0.15 2.8 0.25 500 breakage due to bending, 18 0.75 10 white FII1810W grey FID1810GR 16 10 1.2 0.15 2.8 0.25 500 wire stress or vibration 18 0.75 12 white FII1812W grey FID1812GR 18 12 1.2 0.15 2.8 0.25 500 18 1 6 yellow FII1806Y red FID1806R 12 6 1.4 0.15 3 0.25 500 while facilitating wire inser- 18 1 8 yellow FII1808Y red FID1808R 14 8 1.4 0.15 3 0.25 500 tion into the terminal clamp. 18 1 10 yellow FII1810Y red FID1810R 16 10 1.4 0.15 3 0.25 500 18 1 12 yellow FII1812Y red FID1812R 18 12 1.4 0.15 3 0.25 500 16 1.5 6 red FII1606 black FID1606 12 6 1.7 0.15 3.5 0.25 500 Altech’s UL insulated fer- 16 1.5 8 red FII1608 black FID1608 14 8 1.7 0.15 3.5 0.25 500 16 1.5 10 red FII1610 black FID1610 16 10 1.7 0.15 3.5 0.25 500 rules are color coded by 16 1.5 12 red FII1612 black FID1612 18 12 1.7 0.15 3.5 0.25 500 conductor size for conven- 16 1.5 18 red FII1618 black FID1618 24 18 1.7 0.15 3.5 0.25 500 ient identification. 14 2.08 8 yellow FII1408Y 15 8 2.05 0.15 4.2 0.3 500 14 2.5 6 blue FID1406 13 6 2.2 0.15 4.2 0.25 500 14 2.5 8 blue FID1408 15 8 2.2 0.15 4.2 0.25 500 To ensure efficient ferrule 14 2.5 10 blue FID1410 17 10 2.2 0.15 4.2 0.25 500 14 2.5 12 blue FID1412 19 12 2.2 0.15 4.2 0.25 500 crimping, always select the 14 2.5 18 blue FID1418 25 18 2.2 0.15 4.2 0.25 500 smallest ferrule diameter 12 4 8 grey FID1208 16 8 2.8 0.2 4.8 0.3 500 that fits the wire and use 12 4 10 grey FID1210 18 10 2.8 0.2 4.8 0.3 500 12 4 12 grey FID1212 20 12 2.8 0.2 4.8 0.3 500 only professional crimping 12 4 18 grey FID1218 26 18 2.8 0.2 4.8 0.3 100 tools. 10 6 12 black FII1012 yellow FID1012 20 12 3.5 0.2 6.3 0.3 100 10 6 18 black FII1018 yellow FID1018 26 18 3.5 0.2 6.3 0.3 100 8 10 12 ivory FII0812 red FID0812 22 12 4.5 0.2 7.6 0.4 100 In order meet the UL re- 8 10 18 ivory FII0818 red FID0818 28 18 4.5 0.2 7.6 0.4 100 quirements only matching 6 16 12 green FII0612 blue FID0612 22 12 5.8 0.2 8.8 0.4 100 6 16 18 green FII0618 blue FID0618 28 18 5.8 0.2 8.8 0.4 100 UL crimpers should be use. 4 25 16 brown FII0416 yellow FID0416 30 16 7.3 0.2 11.2 0.4 50 4 25 18 brown FII0418 yellow FID0418 32 18 7.3 0.2 11.2 0.4 50 4 25 22 brown FII0422 yellow FID0422 36 22 7.3 0.2 11.2 0.4 50 2 35 16 beige FII0216 red FID0216 30 16 8.3 0.2 12.7 0.4 50 2 35 18 beige FII0218 red FID0218 32 18 8.3 0.2 12.7 0.4 50 2 35 25 beige FII0225 red FID0225 39 25 8.3 0.2 12.7 0.4 50 1 50 20 olive FII0120 blue FID0120 36 20 10.3 0.3 15 0.5 50 1 50 25 olive FII0125 blue FID0125 41 25 10.3 0.3 15 0.5 50 1 50 30 olive FII0130 blue FID0130 46 30 10.3 0. 3 15 0.5 50 Smaller Package S izes 26 0.14 6 grey FII2606M 10 6 0.6 0.15 1.5 0.25 100 26 0.14 8 grey FII2608M 12 8 0.6 0.15 1.5 0.25 100 24 0.25 6 light blue FII2406M 10 6 0.85 0.15 1.8 0.25 100 D 24 0.25 8 light blue FII2408M 12 8 0.85 0.15 1.8 0.25 100 2 24 0.25 12 light blue FII2412M 16 12 0.85 0.15 1.8 0.25 100 S 2 22 0.34 6 turquoise FII2206M 10 6 0.85 0.15 2 0.25 100 22 0.34 8 turquoise FII2208M 12 8 0.85 0.15 2 0.25 100 22 0.34 12 turquoise FII2212M 16 12 0.85 0.15 2 0.25 100 20 0.5 6 orange FII2006M white FID2006M 12 6 1 0.15 2.6 0.25 100 20 0.5 8 orange FII2008M white FID2008M 14 8 1 0.15 2.6 0.25 100 20 0.5 10 orange FII2010M white FID2010M 16 10 1 0.15 2.6 0.25 100 20 0.5 12 orange FII2012M white FID2012M 18 12 1 0.15 2.6 0.25 100 L 1 18 0.75 6 white FII1806WM grey FID1806GRM 12 6 1.2 0.15 2.8 0.25 100 18 0.75 8 white FII1808WM grey FID1808GRM 14 8 1.2 0.15 2.8 0.25 100 18 0.75 10 white FII1810WM grey FID1810GRM 16 10 1.2 0.15 2.8 0.25 100 L 18 0.75 12 white FII1812WM grey FID1812GRM 18 12 1.2 0.15 2.8 0.25 100 2 18 1 6 yellow FII1806YM red FID1806RM 12 6 1.4 0.15 3 0.25 100 18 1 8 yellow FII1808YM red FID1808RM 14 8 1.4 0.15 3 0.25 100 18 1 10 yellow FII1810YM red FID1810RM 16 10 1.4 0.15 3 0.25 100 18 1 12 yellow FII1812YM red FID1812RM 18 12 1.4 0.15 3 0.25 100 S 16 1.5 6 red FII1606M black FID1606M 12 6 1.7 0.15 3.5 0.25 100 1 16 1.5 8 red FII1608M black FID1608M 14 8 1.7 0.15 3.5 0.25 100 D1 16 1.5 10 red FII1610M black FID1610M 16 10 1.7 0.15 3.5 0.25 100 16 1.5 12 red FII1612M black FID1612M 18 12 1.7 0.15 3.5 0.25 100 14 2.08 8 yellow FII1408YM 15 8 2.05 0.15 4.2 0.25 100 14 2.5 6 blue FID1406M 13 6 2.2 0.15 4.2 0.25 100 14 2.5 8 blue FID1408M 15 8 2.2 0.15 4.2 0.25 100 14 2.5 10 blue FID1410M 17 10 2.2 0.15 4.2 0.25 100 14 2.5 12 blue FID1412M 19 12 2.2 0.15 4.8 0.25 100 12 4 8 grey FID1208M 16 8 2.8 0.2 4.8 0.3 50 12 4 10 grey FID1210M 18 10 2.8 0.2 4.8 0.3 50 10 6 12 black FII1012M yellow FID1012M 20 12 3.5 0.2 6.3 0.3 20 8 10 12 ivory FII0812M red FID0812M 22 12 4.5 0.2 7.6 0.4 20 116 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES UL RECOGNIZED TWIN INSULATED FERRULES Standard Packaging L Dimensions (mm) 2 HIGHLIGHTS AWG mm2 Barrel Length Industry Standard DIN Standard L1 L2 D1 S1 S2 A B Std. (mm) color Cat. No. color Cat. No. Pack 2 x 22 2 x 0.34 8 turquoise FTI2208 15 8 1.2 0.15 0.25 3.5 2 500 2 x 20 2 x 0.5 8 orange FTI2008 white FTD2008 14 8 1.4 0.15 0.3 5 3 500 FEATURES 2 x 20 2 x 0.5 10 orange FTI2010 white FTD2010 16 10 1.4 0.15 0.3 5 3 500 2 x 20 2 x 0.5 12 orange FTI2012 white FTD2012 18 12 1.4 0.15 0.3 5 3 500 2 x 18 2 x 0.75 8 white FTI1808W grey FTD1808GR 14 8 1.7 0.15 0.3 5.5 3 500 Ferrules insure reliable 2 x 18 2 x 0.75 10 white FTI1810 grey FTD1810 16 10 1.7 0.15 0.3 5.5 3 500 electrical connections when 2 x 18 2 x 0.75 12 white FTI1812W grey FTD1812GR 18 12 1.7 0.15 0.3 5.5 3 500 terminating stranded flexi- 2 x 18 2 x 0.75 18 white FTI1818W grey FTD1818GR 24 18 1.7 0.15 0.3 5.5 3 500 2 x 18 2 x 1 8 yellow FTI1808Y red FTD1808R 15 8 2 0.15 0.3 5.8 3.2 500 ble wire in terminal blocks, 2 x 18 2 x 1 12 yellow FTI1812Y red FTD1812R 19 12 2 0.15 0.3 5.8 3.2 500 circuit breakers or other 2 x 18 2 x 1 14 yellow FTI1814 red FTD1814 21 14 2 0.15 0.3 5.8 3.2 500 2 x 18 2 x 1 18 yellow FTI1818Y red FTD1818R 25 18 2 0.15 0.3 5.8 3.2 500 control devices. Insulated 2 x 16 2 x 1.5 8 red FTI1608 black FTD1608 16 8 2.2 0.15 0.3 6.5 3.6 500 ferrules prevent conductor 2 x 16 2 x 1.5 12 red FTI1612 black FTD1612 20 12 2.2 0.15 0.3 6.5 3.6 500 breakage due to bending, 2 x 16 2 x 1.5 18 red FTI1618 black FTD1618 26 18 2.2 0.15 0.3 6.6 3.6 100 2 x 14 2 x 2.5 10 blue FTD1410 19 10 2.8 0.15 0.4 8 4.5 500 wire stress or vibration 2 x 14 2 x 2.5 12 blue FTD1412 21 12 2.8 0.15 0.4 8 4.5 100 while facilitating wire inser- 2 x 14 2 x 2.5 18 blue FTD1418 27 18 2.8 0.15 0.4 8 4.5 100 2 x 12 2 x 4 12 grey FTD1212 22 12 3.5 0.2 0.5 9 5.2 100 tion into the terminal clamp. 2 x 12 2 x 4 18 grey FTD1218 28 18 3.5 0.2 0.5 9 5.2 100 2 x 10 2 x 6 12 black FTI1012 yellow FTD1012 23 12 4.5 0.2 0.5 11.4 6.2 100 Altech’s UL insulated fer- 2 x 10 2 x 6 18 black FTI1018 yellow FTD1018 29 18 4.5 0.2 0.5 11.4 6.2 100 2 x 8 2 x 10 12 ivory FTI0812 red FTD0812 24 12 5.8 0.2 0.5 13.4 7.6 100 rules are color coded by 2 x 8 2 x 10 18 ivory FTI0818 red FTD0818 30 18 5.8 0.2 0.5 13.4 7.6 100 conductor size for conven- 2 x 6 2 x 16 16 olive FTI0616 blue FTD0616 29 16 8.3 0.3 0.6 17.2 9.5 50 2 x 6 2 x 16 25 olive FTI0625 blue FTD0625 38 25 8.3 0.3 0.6 17.2 9.5 50 ient identification. Smaller Package Sizes To ensure efficient ferrule 2 x 22 2 x 0.34 8 turquoise FTI2208M 15 8 1.2 0.15 0.25 3.5 2 100 crimping, always select the 2 x 20 2 x 0.5 8 orange FTI2008M white FTD2008M 14 8 1.4 0.15 0.3 5 3 100 smallest ferrule diameter 2 x 20 2 x 0.5 10 orange FTI2010M white FTD2010M 16 10 1.4 0.15 0.3 5 3 100 2 x 20 2 x 0.5 12 orange FTI2012M white FTD2012M 18 12 1.4 0.15 0.3 5 3 100 that fits the wire and use 2 x 18 2 x 0.75 8 white FTI1808WM grey FTD1808GRM 14 8 1.7 0.15 0.3 5.5 3 100 only professional crimping 2 x 18 2 x 0.75 10 white FTI1810M grey FTD1810M 16 10 1.7 0.15 0.3 5.5 3 100 tools. 2 x 18 2 x 0.75 12 white FTI1812WM grey FTD1812GRM 18 12 1.7 0.15 0.3 5.5 3 100 2 x 18 2 x 1 8 yellow FTI1808YM red FTD1808RM 15 8 2 0.15 0.3 5.8 3.2 100 2 x 18 2 x 1 12 yellow FTI1812YM red FTD1812RM 19 12 2 0.15 0.3 5.8 3.2 100 In order meet the UL re- 2 x 16 2 x 1.5 8 red FTI1608M black FTD1608M 16 8 2.2 0.15 0.3 6.5 3.6 100 2 x 16 2 x 1.5 12 red FTI1612M black FTD1612M 20 12 2.2 0.15 0.3 6.5 3.6 100 quirements only matching 2 x 14 2 x 2.5 10 blue FTD1410M 19 10 2.8 0.15 0.4 8 4.5 50 UL crimpers should be use. 2 x 14 2 x 2.5 12 blue FTD1412M 21 12 2.8 0.15 0.4 8 4.5 50 2 x 12 2 x 4 12 grey FTD1212M 22 12 3.5 0.2 0.5 9 5.2 20 2 x 10 2 x 6 12 black FTI1012M yellow FTD1012M 23 12 4.5 0.2 0.5 11.4 6.2 20 2 x 8 2 x 10 12 ivory FTI0812M red FTD0812M 24 12 5.8 0.2 0.5 13.4 7.6 20 B L 1 L 2 A D 1 S 1 S 2 Pull-Out Force Minimum Values for DIN Minimum values of pull-out forces for FERRULES according to DIN EN 60947-1:2008, DIN EN 60999-1:2000 and DIN EN 60999-2:2004 Conductor AWG 24 22 20 18 18 16 14 12 10 8 6 4 2 0 00 000 250 300 350 500 600 kcmil kcmil kcmil kcmil kcmil Cross Section mm² 0,20 0,34 0,50 0,75 1,0 1,5 2,5 4,0 6,0 10 16 25 35 50 70 95 120 150 185 240 300 Pull Out Force N 10 15 20 30 35 40 50 60 80 90 100 135 190 236 285 351 427 427 503 578 578 Pull-Out Force Minimum Values for UL486F Conductor AWG 24 22 20 18 18 16 14 12 10 8 6 4 2 Cross Section mm² 0,20 0,34 0,50 0,75 1,0 1,5 2,5 4,0 6,0 10 16 25 35 Pull Out Force N 20 20 20 30 35 40 50 60 80 90 100 135 190 Pounds 4.5 4.5 4.5 6.7 7.9 9.0 11.2 13.5 18 20.2 22.5 30.3 42.7 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 117

FERRULES CRIMPERS FOR UL FERRULES These crimpers are specifically designed for use with ferrules and have been tested with our UL Recognized ferrules to insure proper termination. In order to meet the UL requires, the correct sized crimper from this range should be used. Crimpit F 4 Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with or without plastic collars. Only one crimping profile for the entire cross-section range. Ferrules:0,5 – 4 mm2(20 – 12 AWG) Twin Ferrules:2 x 0.5 – 2 x 2.5 mm2(2 x 20 – 2 x 14 AWG) Cat. No.: Crimpit F 4 Weight 448 g Crimpit F 6 Auto Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars. Feeding from front. Ferrules:0,5 – 6 mm2(20 – 10 AWG) Twin Ferrules:2 x 0.5 – 2 x 2.5 mm2(2 x 20 – 2 x 14 AWG) Cat. No.: Crimpit F 6 Auto Weight 426 g Crimpit F 6 Gyra Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars. Rotatable crimp die for feeding from the front or the side. Ferrules:0,14 – 6 mm2(26 – 10 AWG) Twin Ferrules:2 x 0.5 – 2 x 4 mm2(2 x 20 – 2 x 12 AWG) Cat. No.: Crimpit F 6 Gyra Weight 428 g Crimpit F 6 EN Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars. Crimp conforms to EN 60947-1. Five crimping profiles for the rated conductor cross-sections. Registration in accordance with VG 95211 (Military designation VG 95236 T 14 A 0001). Ferrules:0.25 – 6 mm2(24 – 10 AWG) Twin Ferrules:2 x 0.75 – 2 x 4 mm2(2 x 18 – 2 x 12 AWG) Cat. No.: Crimpit F 6 EN Weight 423 g Crimpit F 6 L Crimping tool for ferrules (conforming to DIN 46228 part 1 and 2) with and without insulating col- lar. Five crimping profiles depending on the wire cross-sections. Ferrules:0.5 – 6 mm2(20 – 10 AWG) Twin Ferrules:2 x 0.75 – 2 x 4 mm2(2 x 18 – 2 x 12 AWG) Cat. No.: Crimpit F 6 L Weight 335 g 118 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES CRIMPERS FOR UL FERRULES Crimpit F 16 Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars. Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections. Registration in accordance with VG 95211 (Military designation VG 95236 T 14 A 0002). Ferrules:6 – 16 mm2(10 – 6 AWG) Cat. No.: Crimpit F 16 Weight 418 g Crimpit F 16 L Crimping tool for ferrules (according to DIN 46228 part 1 and 4) with and without plastic collars. Crimp conforms to EN 60947-1. Three crimping profiles for the rated conductor cross-sections. Ferrules:6 – 16 mm2(10 – 6 AWG) Cat. No.: Crimpit F 16 L Weight 380 g Crimpit F 25 L Crimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules. Ferrules:6 – 25 mm2(10 – 4 AWG) Twin Ferrules:2 x 4 – 2 x 10 mm2(2 x 12 – 2 x 8 AWG) Cat. No.: Crimpit F 25 L Weight 540 g Crimpit F 50 L Crimping tool for ferrules (according to DIN 46228 part 1 and 4) as well as for twin ferrules. Ferrules:35 – 50 mm2(2 – 1 AWG) Twin Ferrules:2 x 16 mm2(2 x 6 AWG) Cat. No.: Crimpit F 50 L Weight 540 g Crimper Selection Guide Single Wire Dual Wire Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit F4 F6 Gyra F6 EN F6 Auto F6L F16/F16L F25L F50L AWG mm² AWG mm² 26 0.14 24 0.25 22 0.34 20 0.5 18 0.75 2 x 22 2 x 0.34 18 1.0 2 x 20 2 x 0.5 16 1.5 2 x 18 2 x 0.75 14 2.5 2 x 16 2 x 1.5 12 4 2 x 14 2 x 2.5 10 6 2 x 12 2 x 4 8 10 2 x 8 2 x 6 6 16 4 25 2 x 6 2 x 10 2 35 1 50 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 119

FERRULES CRIMPIT F MULTI AND CRIMPING MACHINES Cutter, Stripper and Crimper This one tool will cut and strip the wires and uses belt feed ferrules for fast and easy installation. Crimpit F Multi Multi-function tool. Stripping and cutting of wires. Crimping tool for insulated belt-strip ferrules according to DIN 40228. Cross-section:0.5 – 2.5 mm2(20 – 14 AWG) Ferrules:0.5 x 2.5 mm2(20 x 14 AWG) Cat. No.: Crimpit F Multi Weight 200 g UL Recognized Insulated Belt Strip Ferrules AWG mm2 Barrel Length Industry Standard DIN Standard Std. (mm) color Cat. No. color Cat. No. Pack 20 0.5 8 orange FII2008B white FID2008B 10 x 50 18 0.75 8 white FII1808WB grey FID1808GRB 10 x 50 18 1 8 yellow FII1808YB red FID1808RB 10 x 50 16 1.5 8 red FII1608B black FID1608B 10 x 50 14 2.5 8 b l u e FID1408B 10 x 50 AUTOMATED FERRULE CRIMPING MACHINES For technical and ordering information regarding Ferrule Crimping Machines please contact Altech. 120 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES ORIGINAL INDUSTRY STANDARD FERRULES Original Industry Standard Ferrules HIGHLIGHTS FEATURES C Ferrules insure reliable electri- cal connections when terminat- Tested According To: ing stranded flexible wire in CSA Std C22.2 No. 65-93 - Wire Connectors terminal blocks, circuit break- CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors ers or other control devices. In- 220672 ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors sulated ferrules prevent ANSI/UL Std No. 486C - Splicing Wire Connectors conductor breakage due to bending, wire stress or vibra- Cat. Barrel Length (B) Ferrule Dimensions mm Std. AWG mm2 Color No. mm A B C D Pack* tion while facilitating wire inser- tion into the terminal clamp. 24 0.25 Lt. Blue 2620.0 6 10 6 1.2 2.3 500/100 Altech’s standard insulated fer- 24 0.25 Lt. Blue 2621.0 8 12 8 1.2 2.3 500/100 rules are color coded by con- ductor size for convenient 22 0.34 Turquoise 2622.0 6 10 6 1.2 2.5 500/100 identification. 22 0.34 Turquoise 2623.0 8 12 8 1.2 2.5 500/100 To ensure efficient ferrule 20 0.5 Orange 2397.0 6 12 6 1.3 2.8 500/100 crimping, always select the 20 0.5 Orange 2201.0 8 14 8 1.3 2.8 500/100 smallest ferrule diameter that fits the wire and use only pro- 18 0.75 White 2398.0 6 12 6 1.5 3.3 500/100 fessional crimping tools. 18 0.75 White 2202.0 8 14 8 1.5 3.3 500/100 18 1 Yellow 2399.0 6 12 6 1.7 3.5 500/100 • Sleeve: polypropylene • Tube: tin-plated copper 18 1 Yellow 2203.0 8 14 8 1.7 3.5 500/100 16 1.5 Red 2204.0 8 14 8 2.0 4.0 500/100 16 1.5 Red 2400.0 10 16 10 2.0 4.0 500/100 16 1.5 Red 2205.0 18 24 18 2.0 4.0 500/100 CRIMPER 14 2.5 Blue 2206.0 8 14 8 2.5 4.7 500/100 SELECTOR 14 2.5 Blue 2401.0 12 18 12 2.5 4.7 500/100 GUIDE 14 2.5 Blue 2207.0 18 24 18 2.5 4.7 500/100 page 18 12 4 Gray 2208.0 10 17 10 3.2 5.4 500/100 12 4 Gray 2402.0 12 20 12 3.2 5.4 500/100 12 4 Gray 2209.0 18 26 18 3.2 5.4 100 10 6 Black 2210.0 12 20 12 3.9 6.9 100 10 6 Black 2211.0 18 26 18 3.9 6.9 100 8 10 Ivory 2212.0 12 22 12 4.9 8.4 100 8 10 Ivory 2213.0 18 28 18 4.9 8.4 100 6 16 Green 2214.0 12 24 12 6.2 9.6 100 6 16 Green 2215.0 18 28 18 6.2 9.6 100 4 25 Brown 2267.0 18 30 18 7.7 12.0 50 4 25 Brown 2272.0 22 36 22 7.7 12.0 50 2 35 Beige 2276.0 18 30 18 8.7 13.5 50 2 35 Beige 2390.0 25 39 25 8.7 13.5 50 1 50 Olive 2500.0 20 36 20 10.9 16.0 50 2/0 70 Yellow 2786.0 20 37 20 13.4 17.0 25 3/0 95 Red 2787.0 25 44 25 15.4 19.0 5 4/0 120 Blue 2788.0 27 48 27 17.6 22.4 25 250MCM 150 Yellow 2789.0 32 58 32 20.5 25.0 25 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Cat. No. 2620.0/100 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 121

FERRULES ORIGINAL DIN STANDARD FERRULES HIGHLIGHTS Original DIN Standard Ferrules FEATURES Ferrules insure reliable electrical connections Tested According To: when terminating stranded CSA Std C22.2 No. 65-93 - Wire Connectors flexible wire in terminal CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors blocks, circuit breakers or ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors 220672 other control devices. ANSI/UL Std No. 486C - Splicing Wire Connectors Cat. Barrel Length (B) Ferrule Dimensions mm Std. Insulated ferrules prevent AWG mm2 Color No. mm A B C D Pack* conductor breakage due to bending, wire stress or vi- 20 0.50 White 2863.0 6 12 6 1.3 2.8 500/100 bration while facilitating wire insertion into the ter- 20 0.50 White 2864.0 8 14 8 1.3 2.8 500/100 minal clamp. 20 0.50 White 2865.0 10 16 10 1.3 2.8 500/100 Altech’s DIN standard fer- 18 0.75 Gray 2866.0 6 12 6 1.5 3.3 500/100 rules are in compliance 18 0.75 Gray 2867.0 8 14 8 1.5 3.3 500/100 with DIN requirements, making them ideal for ex- 18 0.75 Gray 2868.0 10 16 10 1.5 3.3 500/100 port applications. They 18 0.75 Gray 2869.0 12 18 12 1.5 3.3 500/100 also have a specified color code convention that dif- 18 1 Red 2870.0 6 12 6 1.7 3.5 500/100 fers from the color code 18 1 Red 2871.0 8 14 8 1.7 3.5 500/100 used for Altech’s industry standard ferrules. 18 1 Red 2872.0 10 16 10 1.7 3.5 500/100 18 1 Red 2840.0 12 18 12 1.7 3.5 500/100 To ensure efficient ferrule 16 1.5 Black 2841.0 8 14 8 2 4 500/100 crimping, always select the smallest ferrule diameter 16 1.5 Black 2842.0 10 16 10 2 4 500/100 that fits the wire and use 16 1.5 Black 2843.0 12 18 12 2 4 500/100 only professional crimping tools. 16 1.5 Black 2844.0 18 24 18 2 4 500/100 14 2.5 Blue 2845.0 8 14 8 2.5 4.7 500/100 • Sleeve: polypropylene • Tube: tin plated copper 14 2.5 Blue 2846.0 12 18 12 2.5 4.7 500/100 14 2.5 Blue 2847.0 18 24 8 2.5 4.7 500/100 12 4 Gray 2848.0 10 17 10 3.2 5.4 500/100 CRIMPER 12 4 Gray 2849.0 12 20 12 3.2 5.4 500/100 SELECTOR 12 4 Gray 2850.0 18 26 18 3.2 5.4 100 GUIDE 10 6 Yellow 2851.0 12 20 12 3.9 6.9 100 page 18 10 6 Yellow 2852.0 18 26 18 3.9 6.9 100 8 10 Red 2853.0 12 22 12 4.9 8.4 100 8 10 Red 2854.0 18 28 18 4.9 8.4 100 6 16 Blue 2855.0 12 24 12 6.2 9.6 100 6 16 Blue 2856.0 18 28 18 6.2 9.6 100 4 25 Yellow 2857.0 18 30 18 7.7 12 50 4 25 Yellow 2858.0 22 36 22 7.7 12 50 2 35 Red 2859.0 18 30 18 8.7 13.5 50 2 35 Red 2860.0 25 39 25 8.7 13.5 50 1 50 Blue 2861.0 20 36 20 10.9 16 50 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Cat. No. 2863.0/100 122 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES ORIGINAL DUAL WIRE FERRULES Original Dual Wire Ferrules HIGHLIGHTS FEATURES Dual Wire Insulated Tested According To: CSA Std C22.2 No. 65-93 - Wire Connectors Dual Wire Ferrules have CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors larger diameters and special ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors 220672 ANSI/UL Std No. 486C - Splicing Wire Connectors shaped sleeves that accept two conductors of the same Wires Cat. Barrel Length (B) Ferrule Dimensions mm Std. or different size. They provide x AWG mm2 Color No. mm A B C D1 D2 Pack* an efficient connection of multiple wires in the same 2x20 2x0.50 White 2794.0 11 14.6 8.2 1.7 3 5 500/100 terminal clamp or simplify 2x18 2x0.75 Gray 2775.0 11 14.6 8.2 2.0 3 5.5 500/100 wire jumpering between ter- minal clamps. They are color 2x18 2x0.75 Gray 2795.0 13 16.4 10 2.0 3 5.5 500/100 coded with the same con- 2x18 2x1 Red 2776.0 11 15.4 8.2 2.4 3.2 5.8 500/100 vention as the insulated DIN 2x18 2x1 Red 2796.0 21 25.2 18 2.4 3.2 5.8 500/100 standard ferrules. 2x16 2x1.5 Black 2777.0 12 15.8 8.2 2.6 3.6 6.5 500/100 To ensure efficient ferrule 2x16 2x1.5 Black 2797.0 16 19.6 12 2.6 3.6 6.5 500/100 crimping always select the smallest ferrule diameter that 2x14 2x2.5 Blue 2778.0 14 18.5 10 3.3 4.5 8 500/100 fits the wire and use only 2x14 2x2.5 Blue 2798.0 17 20.5 12 3.3 4.5 8 500/100 professional crimping tools. 2x12 2x4 Gray 2799.0 16 22 12 3.9 5.2 9 100 • Sleeve: polypropylene 2x10 2x6 Yellow 2800.0 18 23 12 5 6.2 11.4 100 • Tube: tin plated copper 2x8 2x10 Red 2801.0 18 24 12 6.2 7.6 13.4 100 2X6 2x16 Blue 2802.0 20 29 16 8.9 9.5 17.2 100/50 INSULATED FERRULES Assortment Box * Different standard packs are available for many ferrules. To order the desired standard pack, please Handy Assortment Boxes for use the quantity required as a suffix to the Cat. No. convenient dispensing and storage of Industry and DIN Example: Cat. No. 2794.0/100 for a standard pack of 100 Standard Insulated Ferrules. Types AB1-S and AB1-D are equipped with five different ferrule sizes. Types AB2-S Ferrule Ferrule Ferrule Std. Qty. AWG mm2 Cat. No. Color Type Cat. No. Pack and AB2-D are equipped with four different ferrule AB1-S Industry Standard AB1-S 2884.9 1 sizes. Contents of each box 50 20 0.5 2201.0 Orange is listed. 100 20 0.75 2202.0 White 100 18 1 2399.0 Yellow 100 16 1.5 2204.0 Red CRIMPER 50 14 2.5 2206.0 Blue SELECTOR AB2-S Industry Standard AB2-S 2885.9 1 50 12 4 2208.0 Gray GUIDE 20 10 6 2210.0 Black page 18 20 8 10 2212.0 Ivory 10 6 16 2214.0 Green AB1-D DIN Standard AB1-D 2884.0 1 50 20 0.5 2864.0 White AB1-S 100 20 0.75 2867.0 Gray 100 18 1 2871.0 Red 100 16 1.5 2841.0 Black 50 14 2.5 2845.0 Blue AB2-D DIN Standard AB2-D 2885.0 1 50 12 4 2848.0 Gray 20 10 6 2851.0 Yellow 20 8 10 2853.0 Red 10 6 16 2855.0 Blue AB2-S Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 123

FERRULES ORIGINAL UNINSULATED FERRULES HIGHLIGHTS Original Uninsulated Ferrules FEATURES Ferrules insure reliable Tested According To: electrical connections CSA Std C22.2 No. 65-93 - Wire Connectors when terminating CSA Std C22.2 No. 188-M1983 - Splicing Wire and Cable Connectors stranded flexible wire in ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors terminal blocks, circuit 220672 ANSI/UL Std No. 486C - Splicing Wire Connectors breakers or other control devices. Cat. Barrel Length (A) Ferrule Dimensions mm Std. AWG mm2 No. mm A B (ID) C Pack* Uninsulated ferrules pre- vent wire strands from 20 0.5 2216.0 6 6 1.3 2.1 1000/100 fraying and breaking and 18 0.75 2217.0 6 6 1.5 2.3 1000/100 are extremely cost effec- tive. Their shorter lengths 18 0.75 2218.0 10 10 1.5 2.3 1000/100 and uninsulated bodies 18 1 2219.0 6 6 1.7 2.5 1000/100 offer advantages when 18 1 2220.0 10 10 1.7 2.5 1000/100 making terminations in printed circuit board ter- 16 1.5 2221.0 7 7 2.3 2.8 1000/100 minal blocks and in other 16 1.5 2222.0 10 10 2.3 2.8 1000/100 terminal blocks with smaller clamps or narrow 14 2.5 2223.0 7 7 2.5 3.4 1000/100 widths. 14 2.5 2224.0 12 12 2.5 3.4 1000/100 To ensure efficient ferrule 12 4 2225.0 9 9 3.2 4.0 1000/100 crimping, always select 12 4 2226.0 12 12 3.2 4.0 1000/100 the smallest ferrule diame- ter that fits the wire and 10 6 2227.0 12. 12 3.9 4.7 500/100 use only professional 10 6 2388.0 15 15 3.9 4.7 500/100 crimping tools. (Please refer to the ordering pages 8 10 2228.0 12 12 4.9 5.8 500/100 and the Crimper Selector 8 10 2389.0 15 15 4.9 5.8 500/100 Guide on page 18.) 8 10 2229.0 18 18 4.9 5.8 500/100 • Tube: tin plated copper 6 16 2391.0 12 12 6.2 7.5 500/100 6 16 2392.0 15 15 6.2 7.5 500/100 6 16 2393.0 18 18 6.2 7.5 100 4 25 2394.0 15 15 7.7 9.5 500/100 4 25 2395.0 18 18 7.7 9.5 100 2 35 2396.0 18 18 8.7 11 100 1 50 2816.0 32 32 10.9 13 100 2/0 70 2790.0 25 25 13.3 15 100 3/0 95 2791.0 32 32 15.3 17 50 4/0 120 2792.0 32 32 17.5 19 25 250MCM 150 2793.0 32 32 19.5 21 25 350MCM 185 2815.0 32 32 21.2 23.5 25 500MCM 240 2815.5 40 40 23.0 25 25 CRIMPER SELECTOR GUIDE page 118, 119, 125 and 126 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Cat. No. 2216.0/100 124 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES UNIVERSAL CRIMPERS FOR ORIGINAL FERRULES Universal Ferrule Crimpers for Original Ferrules Front Conductor Entry One die crimps a wide range of insulated and uninsulated ferrule sizes. Three Universal Ferrule Crimpers are offered to crimp different ferrule and wire size ranges up to 16mm2(6 AWG). • Positive ratcheting with spring return • Trapezoidal crimp geometry • Comfort grip plastic handle • Hardened steel frame, matte black Universal Ferrule Crimper Universal Ferrule Crimper Universal Ferrule Crimper Part No. Wire/ Ferrule Std. Part No. Wire/ Ferrule Std. Part No. Wire/ Ferrule Std. AWG mm2 Pack AWG mm2 Pack AWG mm2 Pack E110.000 26 - 10 0.14 - 6 1 E110.005 20 - 8 0.5 - 10 1 E110.010 8 - 6 10 - 16 1 Replacement Spring Set: Replacement Spring Set: Replacement Spring Set: 185140008 Handle Spring Set 185140008 Handle Spring Set 185140008 Handle Spring Set 318001002 Rachet Spring 318001002 Rachet Spring 318001002 Rachet Spring Ferrule Crimper Side Conductor Entry • Positive ratcheting with spring return Individual crimp cavities conform to industry standard insulated • Emergency release and uninsulated ferrules from 25-50mm2(4-1 AWG). • Trapezoidal crimp geometry • Comfort grip plastic handle • Hardened steel frame, matte black Ferrule Crimper Ferrule Crimper Vise Mount Ferrule Crimper Part No. Wire/ Ferrule Std. Part No. Wire/ Ferrule Std. Part No. Wire/ Ferrule Std. AWG mm2 Pack AWG mm2 Pack AWG mm2 Pack E110.015 4 - 2 25 - 35 1 E110.020 1 50 1 22.030 2/0-250 70 - 150 1 MCM Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 125

FERRULES PNEUMATIC CRIMPING TOOL FOR ORIGINAL FERRULES HIGHLIGHTS Pneumatic Crimping Tool for Original Ferrules FEATURES Altech's pneumatic crimping tools speed • Operates on 60 - 90 psi air supply the crimping process of insulated or unin- • Crimp insulated and uninsulated sulated ferrules for a wide range of wire ferrules sizes up to 8 AWG. • Trapezoidal crimp geometry • Flexible coil air hose with 1/4" Altech pneumatic crimpers are simple and NPT interchange easy to use. Just install the ferrule over the • Metal tool body and base end of the stripped wire and insert it into ei- • Hardened steel crimp head ther the front or side tool opening. Then touch the actuating lever or push the foot switch pedal to initiate the crimp cycle. Once the head closes it will automatically re- open after crimping. The resulting crimp fea- tures a compact trapezoidal cross section which is mechanically very strong and pro- vides a large surface to insure a highly effi- cient electrical contact. Crimp ferrules efficiently and economically. Wire/ Ferrule Size Tool Wt. Std. A unique dual crimping head provides con- Tool AWG mm2 Cat. No. g (lbs.) Pack venient front or side wire entry, allowing Hand Held Crimper with Actuating Lever 24-14 0.25-2.5 22.014 430 (.95) 1 crimping from multiple positions. This fea- Crimp Insulated Ferrules tures makes crimping in tight places simple. and Uninsulated Ferrules Choose either lever actuated, hand held Hand Held Crimper with Actuating Lever 12-8 4-10 22.015 430 (.95) 1 units or hands-free foot switch operated Crimp Insulated Ferrules table top models, in two basic tool sizes. and Uninsulated Ferrules Hand held models feature a flexible coil air- hose with 1/4" NPT interchange connector Table Top Crimper with Foot Switch and Storage Trays 24-14 0.25-2.5 22.016 1000 (2.20) 1 for quick hook-up with a standard push-to- Crimp Insulated Ferrules connect coupler. and Uninsulated Ferrules The table top units also include a flexible coil Table Top Crimper with Foot Switch and Storage Trays 12-8 4-10 22.017 1000 (2.20) 1 air hose to the foot switch and a 1/4" NPT Crimp Insulated Ferrules interchange located on the foot switch for and Uninsulated Ferrules one hand push-to-connect supply hook-up. Magnetic Mounting Holder 22.018 --- 1 They feature a sturdy metal base with inte- for hand held pneumatic crimpers gral table clamp and dual storage trays for quick access to the ferrule supply. The air Counterbalance 22.019 --- 1 release port on the foot switch has been qui- for hand held pneumatic crimpers eted with a sintered bronze air silencer. The foot switch has a metal frame and a tough fiberglass shroud. Its spring return pedal provides for short actuating cycles. Optional items for the hand held crimper in- clude a counterbalance for maximum con- trol and a magnetic holder for storage. 126 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

FERRULES ORIGINAL FERRULE AND WIRE SIZE BY CRIMPER TYPE Original Ferrule and Wire Size by Crimper Type Use this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to following pages for selection and ordering information of crimpers. 1.Determine the wire size(s) to be used. 2.To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire. 3.Based on the ferrule size, choose the crimper type appropriate for use. 4.Select the crimper style best suited for your application. CRIMPER STYLES VISE MOUNT UNIVERSAL FERRULE PNEUMATIC FERRULE CRIMPER FERRULE CRIMPER CRIMPER WiAreW SGize Ferrmulme 2Size Crimper ETy1p1e0.000E110.00E5110.010E110.015E110.02202.014* 22.015 22.016*22.017 22.030 26 0.14 24 0.25 22 0.34 20 0.50 20 0.75 18 1 16 1 14 2.5 12 4 10 6 8 10 6 16 4 25 2 35 1 50 2/0 70 3/0 95 4/0 120 250MCM 150 Dual Wire Ferrules E110.000 crimper covers 2x20 to 2x12 AWG dual wire ferrules E110.010 crimper covers 2x10 to 2x8 AWG dual wire ferrules E110.015 crimper covers 2x6 AWG dual wire ferrules Key: = Cavity Range * Insulated ferrule/wire size range is shown, uninsulated ferrule range is 16-14 AWG (1.5 - 2.5mm2). Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 127

INDEX Cat. No. Page Cat. No. Page Cat. No. Page Cat. No. Page 40.002........................102 40.406........................102 AGT2.5.........................84 CA512/17-3..................61 40.003........................102 40.407........................102 AGT2.5/3......................84 CA512/17-4..................61 40.004........................102 40.408........................102 AGT2.5/4......................85 CA512/2-2....................61 40.005........................102 40.409........................102 AGT4............................84 CA512/2-3....................61 40.006........................102 40.410........................102 AGT4/3.........................85 CA512/2-4....................61 40.007........................102 40.411........................102 AGT4/4.........................85 CA512/3-2....................61 40.008........................102 40.412........................102 AGT6............................84 CA512/3-3....................61 40.009........................102 40.502........................103 AGT6/3.........................85 CA512/3-4....................61 40.010........................102 40.503........................103 AS2.5...........................80 CA512/4-2....................61 40.011........................102 40.504........................103 AS2.5/3........................81 CA512/4-3....................61 40.012........................102 40.505........................103 AS2.5/4........................81 CA512/4-4....................61 40.102........................103 40.506........................103 AS4..............................80 CA512/7-2....................61 40.103........................103 40.507........................103 AS4/3...........................81 CA512/7-3....................61 40.104........................103 40.508........................103 AS4/4...........................81 CA512/7-4....................61 40.105........................103 40.509........................103 AS6..............................80 CA512/8-2....................61 40.106........................103 40.510........................103 AS6/3...........................82 CA512/8-3....................61 40.107........................103 40.511........................103 ATL2.5..........................83 CA512/8-4....................61 40.108........................103 40.512........................103 ATL2.5H.......................83 CA514/1-2....................61 40.109........................103 40.702........................103 ATLG2.5.......................83 CA514/1-3....................61 40.110........................103 40.703........................103 AUX6..............................8 CA514/13-2..................61 40.111........................103 40.704........................103 BS1016E....................105 CA514/13-3..................61 40.112........................103 40.705........................103 BS1016EM1-12.........105 CA514/13-4..................61 40.202........................102 40.706........................103 BS1016EM13-24.......105 CA514/1-4....................61 40.203........................102 40.707........................103 BS24E........................105 CA514/14/4A...............61 40.204........................102 40.708........................103 BS24EM1-12..............105 CA514/14-2..................61 40.205........................102 40.709........................103 BS24EM13-24...........105 CA514/14-3..................61 40.206........................102 40.710........................103 BS60E........................105 CA514/14-3A...............61 40.207........................102 40.711........................103 BS60EM1-12..............105 CA514/14-4..................61 40.208........................102 40.712........................103 BS60EM13-24...........105 CA514/15-2..................61 40.209........................102 2511110......................106 CA102..................49, 109 CA514/15-3..................61 40.210........................102 2511111......................106 CA103..................87, 109 CA514/15-4..................61 40.211........................102 2511115......................106 CA202............49, 61, 109 CA514/17-2..................61 40.212........................102 2511120.....................106 CA302........................109 CA514/17-3..................61 40.302........................103 2511121.....................106 CA402........................109 CA514/17-4..................61 40.303........................103 2511125.....................106 CA502........................109 CA514/2-2....................61 40.304........................103 2511150.....................107 CA512/1-2....................61 CA514/2-3....................61 40.305........................103 2511160.....................107 CA512/1-3....................61 CA514/2-4....................61 40.306........................103 2511110/1M................106 CA512/13-2..................61 CA514/3-2....................61 40.307........................103 2511111/1M................106 CA512/13-3..................61 CA514/3-3....................61 40.308........................103 2511115/1M................106 CA512/13-4..................61 CA514/3-4....................61 40.309........................103 2511120/1M...............106 CA512/1-4....................61 CA514/4-2....................61 40.310........................103 2511121/1M...............106 CA512/14-2..................61 CA514/4-3....................61 40.311........................103 2511125/1M...............106 CA512/14-3..................61 CA514/4-4....................61 40.312........................103 2511150/1M...............107 CA512/14-4..................61 CA514/7-2....................61 40.402........................102 2511160/1M...............107 CA512/15-2..................61 CA514/7-3....................61 40.403........................102 ADL2.5(E)D1................82 CA512/15-3..................61 CA514/7-4....................61 40.404........................102 ADL2.5(E)D2................82 CA512/15-4..................61 CA514/8-2....................61 40.405........................102 ADLG2.5......................82 CA512/17-2..................61 CA514/8-3....................61 128 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

INDEX Cat. No. Page Cat. No. Page Cat. No. Page Cat. No. Page CA514/8-4....................61 CA704/3.......................48 CA718/2.......................48 CA741/100...................48 CA601/S.....................107 CA704/4.......................48 CA718/3.......................48 CA741/2.......................48 CA602........................109 CA704/6.......................48 CA718/4.......................48 CA741/3.......................48 CA603........................108 CA704/8.......................48 CA721/10.....................48 CA741/4.......................48 CA607/S/Q...................48 CA704/9.......................60 CA721/100...................48 CA742/10.....................48 CA611/S/Q...................48 CA705........................108 CA721/2.......................48 CA742/100...................48 CA623/10.....................48 CA705/01.....................48 CA721/3.......................48 CA742/2.......................48 CA623/2.......................48 CA705/1.......................48 CA721/4.......................48 CA742/3.......................48 CA623/3.......................48 CA705/10.....................48 CA722/10.....................48 CA742/4.......................48 CA623/4.......................48 CA705/11.....................60 CA722/100...................48 CA743/10.....................48 CA624/10.....................48 CA705/2.......................48 CA722/2.......................48 CA743/2.......................48 CA624/2.......................48 CA705/3.......................48 CA722/3.......................48 CA743/3.......................48 CA624/3.......................48 CA705/4.......................48 CA722/4.......................48 CA743/4.......................48 CA624/4.......................48 CA705/6.......................48 CA723/10.....................48 CA744/10.....................48 CA625/10.....................48 CA705/8.......................48 CA723/2.......................48 CA744/2.......................48 CA625/2.......................48 CA705/9.......................60 CA723/3.......................48 CA744/3.......................48 CA625/3.......................48 CA707/S/Q/01..............48 CA723/4.......................48 CA744/4.......................48 CA625/4.......................48 CA707/S/Q/1................48 CA724/10.....................48 CA745/10.....................48 CA627/10.....................48 CA707/S/Q/2................48 CA724/2.......................48 CA745/2.......................48 CA627/2.......................48 CA707/S/Q/3................48 CA724/3.......................48 CA745/3.......................48 CA627/3.......................48 CA707/TS/01.................6 CA724/4.......................48 CA745/4.......................48 CA627/4.......................48 CA707/TS/05.................6 CA725/10.....................48 CA747/10.....................48 CA628/2...................8, 48 CA707/TS/06.................7 CA725/2.......................48 CA747/100...................48 CA628/3...................8, 48 CA710/10.....................48 CA725/3.......................48 CA747/2.......................48 CA629/2...................8, 48 CA710/2.......................48 CA725/4.......................48 CA747/3.......................48 CA629/3...................8, 48 CA710/3.......................48 CA727/10.....................48 CA747/4.......................48 CA701-15...................106 CA710/4.......................48 CA727/100...................48 CA749/10.....................48 CA701-15/S...............106 CA711/10.....................48 CA727/2.......................48 CA749/2.......................48 CA701-15/S-2M.........106 CA711/2.......................48 CA727/3.......................48 CA749/3.......................48 CA701-15-2M.............106 CA711/3.......................48 CA727/4.......................48 CA749/4.......................48 CA702......49, 61, 87, 109 CA711/4.......................48 CA728/10.....................61 CA751/10.....................48 CA703........................108 CA714/10.....................48 CA728/2.......................61 CA751/2.......................48 CA703/01.....................48 CA714/2.......................48 CA728/3.......................61 CA751/3.......................48 CA703/1.......................48 CA714/3.......................48 CA728/4.......................61 CA751/4.......................48 CA703/10.....................48 CA714/4.......................48 CA729/10.....................48 CA761/10.....................48 CA703/11.....................60 CA715/10.....................48 CA729/2.......................48 CA761/2.......................48 CA703/2.......................48 CA715/2.......................48 CA729/3.......................48 CA761/3.......................48 CA703/3.......................48 CA715/3.......................48 CA729/4.......................48 CA761/4.......................48 CA703/4.......................48 CA715/4.......................48 CA731/10.....................48 CA770/10.....................48 CA703/6.......................48 CA716/10.....................48 CA731/100...................48 CA771/10.....................48 CA703/8.......................48 CA716/2.......................48 CA732/10.....................48 CA771/2.......................48 CA703/9.......................60 CA716/3.......................48 CA732/100...................48 CA771/3.......................48 CA704........................108 CA716/4.......................48 CA733/10.....................48 CA771/4.......................48 CA704/01.....................48 CA717/10.....................48 CA734/10.....................48 CA772/10.....................61 CA704/1.......................48 CA717/2.......................48 CA735/10.....................48 CA772/2.......................61 CA704/10.....................48 CA717/3.......................48 CA737/10.....................48 CA772/3.......................61 CA704/11.....................60 CA717/4.......................48 CA739/10.....................48 CA772/4.......................61 CA704/2.......................48 CA718/10.....................48 CA741/10.....................48 CA774/2.......................61 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 129

INDEX Cat. No. Page Cat. No. Page Cat. No. Page Cat. No. Page CA774/3.......................61 CBB70LS.....................58 CDL4U(E)L1/6V...........45 CDLG4.........................11 CA774/4.......................61 CBB95..........................58 CDL4U(E)L2/24V.........45 CDLG4(I.S)..................11 CA781/10.....................48 CBB95LS.....................58 CDL4U(E)L2/6V...........45 CDS6U.........................26 CA781/2.......................48 CBS3U.........................52 CDL4U(E)LA/1000V.....46 CDS6U/FT...................26 CA781/3.......................48 CBS4U.........................52 CDL4U(E)LA/230V.......46 CDS6U/SC...................41 CA781/4.......................48 CBS5U.........................52 CDL4U(E)LA/600V.......46 CDS6U/TS...................26 CA801/1.......................86 CCC4U.........................23 CDL4U(E)LA/75V.........46 CDTTU.........................30 CA801/1-3....................86 CDB10/2......................33 CDL4U(E)LA/90V.........46 CDTTUFT....................30 CA801/2.......................86 CDB10/3......................33 CDL4U(E)LD1/12V......45 CDTTUFTSC...............41 CA801/2-3....................86 CDB10/4......................33 CDL4U(E)LD1/24V......45 CDTTUSC....................41 CA801/3.......................86 CDB25/1......................33 CDL4U(E)LD2/12V......45 CDTTU-SH...................30 CA801/3-3....................86 CDB25/2......................33 CDL4U(E)LD2/24V......45 CENC16.......................36 CA802......49, 61, 87, 109 CDB25/3......................33 CDL4U(E)LD3/12V......44 CENC35.......................36 CA803/1.......................92 CDB25/4......................33 CDL4U(E)LD3/24V......44 CENC4.........................36 CA901/1.......................86 CDB4/1........................33 CDL4U(E)LD4/24V......45 CF4PFT.......................19 CA901/2.......................86 CDB4/10(1)..................32 CDL4U(E)LD4/48V......45 CF4SP...................19, 29 CA901/3.......................86 CDB4/11(1)..................32 CDL4U(E)LD5/110V.....44 CF4SP(L)/110-240V.....19 CA901/4.......................86 CDB4/2........................33 CDL4U(E)LD5/220V....44 CF4SP(L)/6-60V..........19 CA901/5.......................86 CDB4/2(1)....................32 CDL4U(E)LD5/24V......44 CF4SPFT.....................29 CA901/6.......................86 CDB4/3........................33 CDL4U(E)LD5/48V......44 CF4U......................18, 89 CA902........................108 CDB4/3(1)....................32 CDL4U(E)MOV130V....47 CF4U(L)/110-240V.......18 CAFL4U.......................22 CDB4/4........................33 CDL4U(E)MOV275V....47 CF4U(L)/6-60V.............18 CAFL4U(L)/110............22 CDB4/4(1)....................32 CDL4U(E)MOV30V......47 CGMT4........................89 CAFL4U(L)/220............22 CDB4/5........................33 CDL4U(E)MOV460V....47 CGT10N.......................17 CAFL4U(L)/24..............22 CDB4/5(1)....................32 CDL4U(E)MOV510V....47 CGT16N.......................17 CAFL4U(L)/48..............22 CDB4/6........................33 CDL4U(E)MOV60V......47 CGT35U.......................17 CAFL4U(N)..................22 CDB4/6(1)....................32 CDL4U(E)MOV625V....47 CGT4N.........................16 CASP.........................108 CDB6/1........................33 CDL4U(E)MOV680V....47 CGT4U.........................16 CB16/2H......................94 CDB6/2........................33 CDL4U(E)MOV75V......47 CGT6N.........................16 CB16/3H......................94 CDB6/3........................33 CDL4U(E)N1/110V.......44 CHV10U.......................37 CB4/1...........................94 CDB6/4........................33 CDL4U(E)N1/220V......44 CHV4U.........................37 CB4/2...........................94 CDL4U SPACER........108 CDL4U(E)RC0.1..........46 CHV6U.........................37 CB4/2H........................94 CDL4U(E)3LA/230V.....46 CDL4U(E)RC0.22........46 CKT4SP.......................29 CB4/3...........................94 CDL4U(E)3LA/350V.....46 CDL4U(E)SDB12VDC.47 CKT4SPSC..................41 CB4/3H........................94 CDL4U(E)3LA/600V.....46 CDL4U(E)SDB160VDC47 CKT4U.........................28 CB6/1...........................94 CDL4U(E)3LA/90V.......46 CDL4U(E)SDB24VDC.47 CKT4U/4......................28 CB6/2H........................94 CDL4U(E)D1................42 CDL4U(E)SDB48VDC.47 CM1.5S........................93 CB6/3H........................94 CDL4U(E)D2................42 CDL4U(E)SDUA12VDC47 CM1.5S2......................93 CB6/4H........................94 CDL4U(E)D3................42 CDL4U(E)SDUA24VDC47 CM2.5S........................93 CBB120........................59 CDL4U(E)D4/12V........43 CDL4U(E)SDUA48VDC47 CM2.5S2......................93 CBB120LS...................59 CDL4U(E)D4/24V........43 CDL4U(E)SDUK12VDC47 CM4S...........................93 CBB150........................59 CDL4U(E)DD1.............42 CDL4U(E)SDUK24VDC47 CM4S2.........................93 CBB150LS...................59 CDL4U(E)DD2.............42 CDL4U(E)SDUK48VDC47 CMB4...........................90 CBB185........................59 CDL4U(E)DD3.............43 CDL4U(O)....................45 CMC1-2..........................9 CBB185LS...................59 CDL4U(E)DD4.............43 CDL4UN.......................10 CMC2-2..........................9 CBB35/50.....................58 CDL4U(E)DD5/12V......43 CDL4UN(I.S)................10 CMCG4..........................9 CBB35/50LS................58 CDL4U(E)DD5/24V......43 CDL4USP....................42 CMDB10/10.................34 CBB70..........................58 CDL4U(E)L1/24V.........45 CDLG2.5......................11 CMDB10/2...................34 130 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

INDEX Cat. No. Page Cat. No. Page Cat. No. Page Cat. No. Page CMDB10/3...................34 CTL2.5U-H...................14 CXCC4.........................75 DDFL4U(E)/110...........20 CMDB10/4...................34 CTL2.5UH(I.S)D2.........15 CXCP2.5/4...................92 DDFL4U(E)/220...........20 CMDB25/10.................34 CTL2.5U-H(L)/110........15 CXDB35/10............35, 79 DDFL4U(E)/24.............20 CMDB25/2...................34 CTL2.5U-H(L)/12.........15 CXDB35/10A.........35, 79 DDFL4U(E)/440...........20 CMDB25/3...................34 CTL2.5U-H(L)/220.......15 CXDIN..........................78 DDFL4U(E)/48.............20 CMDB25/4...................34 CTL2.5U-H(L)/24.........15 CXDL2.5......................71 DDFL4U(E)LR/110.......21 CMDB4/10...................34 CTL2.5U-H(L)/48.........15 CXDL2.5(E)D1.............72 DDFL4U(E)LR/220.......21 CMDB4/2.....................34 CTLG2.5......................15 CXDL2.5(E)D2.............72 DDFL4U(E)LR/24.........21 CMDB4/3.....................34 CTLG2.5(E)MOV130V.47 CXDL2.5(E)D3.............72 DDFL4U(E)LR/440.......21 CMDB4/4.....................34 CTLG2.5(E)MOV275V.47 CXDL2.5(E)DD1..........73 DDFL4U(E)LR/48.........21 CMDB6/10...................34 CTLG2.5(E)MOV30V...47 CXDL2.5(E)DD2..........73 DDFL4ULR..................21 CMDB6/2.....................34 CTLG2.5(E)MOV60V...47 CXDL2.5(E)DD3..........73 EP0DL2.5.....................49 CMDB6/3.....................34 CTLG2.5(E)MOV75V...47 CXDL2.5(E)DD4..........73 EP0DL4U.....................49 CMDB6/4.....................34 CTS10U.........................7 CXDL2.5(E)LD1...........73 EP10DL2.5...................49 CMS2.5........................91 CTS10USC..................40 CXDL2.5(E)TS1...........73 EP10DL4U...................49 CMT4...........................89 CTS16U.........................7 CXDL2.5(I.S)................71 EP2.5/4UN...................49 CMTB35.....................108 CTS2.5U-N....................6 CXDLG2.5....................71 EP6/10U.......................49 CPD1...........................75 CTS25UN.......................7 CXDLG2.5(I.S).............71 EPADL2.5....................87 CPF........................23, 75 CTS35UN.......................7 CXF4............................74 EPADLG2.5..................87 CPF(L)110-240V..........75 CTS4U-N.......................6 CXF4(L)110-240V........74 EPAS2.5.......................87 CPF(L)6-60V................75 CTS4USC....................40 CXF4(L)6-60V..............74 EPAS4..........................87 CPFL110-240V............23 CTS50/70N....................8 CXG10.........................69 EPAS6..........................87 CPFL6-60V..................23 CTS50/70NA..................8 CXG10/3......................70 EPATL2.5.....................87 CSB3/N3U...................53 CTS6U...........................6 CXG2.5........................68 EPATL2.5H..................87 CSB3/N3UL.................53 CTS6USC....................40 CXG2.5/3.....................69 EPATLG2.5..................87 CSB4/N4U...................53 CTS95/120N..................8 CXG2.5/4.....................69 EPCAFL4U..................49 CSB5/N5U...................53 CTSPC.........................49 CXG4...........................68 EPCBS3U....................61 CSC16T.......................65 CTT2.5UG....................38 CXG4/3........................69 EPCDL4U....................49 CSCP2.5T....................92 CTT2.5UJ.....................38 CXG4/4........................70 EPCDL4UN..................49 CSCP2.5T2..................92 CTT2.5UK....................38 CXG6...........................68 EPCDLG2.5.................49 CSDL4U.......................31 CTT2.5UT....................38 CXG6/3........................70 EPCDS6U....................49 CSP1............................49 CX10............................65 CXK2.5.........................76 EPCDTTU....................49 CSTSB4U....................55 CX10/3.........................66 CXK2.5/4......................76 EPCKT4U....................49 CSTSB5U....................55 CX2.5...........................64 CXK4............................76 EPCKT4U/4.................49 CSTSN4U....................54 CX2.5/1B......................78 CXLPN.........................78 EPCM1.5S...................93 CSTSN5U....................54 CX2.5/3........................65 CXM2.5........................91 EPCM2.5S...................93 CSTSN6U....................54 CX2.5/4........................65 CXMG2.5.....................91 EPCM4S......................93 CSTSPC1-2.................61 CX2.5/4(E)D1...............67 CXPOL.........................78 EPCMB4......................90 CSTSPC1-3.................61 CX2.5/4P......................67 CXS2.5.........................77 EPCMC1-2...................49 CSTSPC1-4.................61 CX2.5PLN....................78 CXS4............................77 EPCMC2-2...................49 CTC4U.........................39 CX2.5PN......................78 CXSG2.5......................77 EPCMT4................49, 89 CTL2.5U.......................14 CX2.5SLN....................78 CXSG4.........................77 EPCSCP2.5T...............92 CTL2.5U(I.S)................14 CX2.5SN......................78 CXSR2N......................78 EPCSFL4U..................49 CTL2.5U(L)/110...........15 CX4..............................64 CXSR4N......................78 EPCSTSU....................61 CTL2.5U(L)/12.............15 CX4/3...........................66 D35CLIP-M4..............108 EPCTC4U....................49 CTL2.5U(L)/220...........15 CX4/4...........................66 D35CLIP-M5..............108 EPCTL2.5U..................49 CTL2.5U(L)/24.............15 CX6..............................64 DDDL4U.......................31 EPCTL2.5U-H..............49 CTL2.5U(L)/48.............15 CX6/3...........................66 DDFL4U.......................20 EPCTLG2.5..................49 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 131

INDEX Cat. No. Page Cat. No. Page Cat. No. Page Cat. No. Page EPCX10.......................87 HE10HWPR/02............99 HE1HWPR/06..............98 HE42SST/10..............101 EPCX10/3....................87 HE10HWPR/03............99 HE1HWPR/07..............98 HE42SST/11..............101 EPCX2.5......................87 HE10HWPR/04............99 HE1HWPR/08..............98 HE42SST/12..............101 EPCX2.5/3...................87 HE10HWPR/05............99 HE1HWPR/09..............98 HE42ST/02................100 EPCX2.5/4...................87 HE10HWPR/06............99 HE1HWPR/10..............98 HE42ST/03................100 EPCX4.........................87 HE10HWPR/07............99 HE1HWPR/11..............98 HE42ST/04................100 EPCX4/3......................87 HE10HWPR/08............99 HE1HWPR/12..............98 HE42ST/05................100 EPCX4/4......................87 HE10HWPR/09............99 HE1WPR/02.................96 HE42ST/06................100 EPCX6.........................87 HE10HWPR/10............99 HE1WPR/03.................96 HE42ST/07................100 EPCX6/3......................87 HE10HWPR/11............99 HE1WPR/04.................96 HE42ST/08................100 EPCXDL2.5..................87 HE10HWPR/12............99 HE1WPR/05.................96 HE42ST/09................100 EPCXM2.5...................91 HE10WPR/02...............97 HE1WPR/06.................96 HE42ST/10................100 EPCXS2.5....................87 HE10WPR/03...............97 HE1WPR/07.................96 HE42ST/11.................100 EPCXS4.......................87 HE10WPR/04...............97 HE1WPR/08.................96 HE42ST/12................100 EPDDFL4U..................49 HE10WPR/05...............97 HE1WPR/09.................96 HE4HNWPR/02...........98 EPSTH3.......................61 HE10WPR/06...............97 HE1WPR/10.................96 HE4HNWPR/03...........98 EPSTH4.......................61 HE10WPR/07...............97 HE1WPR/11.................96 HE4HNWPR/04...........98 EPSTH4DT..................61 HE10WPR/08...............97 HE1WPR/12.................96 HE4HNWPR/05...........98 EPSTH6.......................61 HE10WPR/09...............97 HE42BU/02................100 HE4HNWPR/06...........98 EPUSC.........................49 HE10WPR/10...............97 HE42BU/03................100 HE4HNWPR/07...........98 GMH1.........................110 HE10WPR/11...............97 HE42BU/04................100 HE4HNWPR/08...........98 GMH2.........................110 HE10WPR/12...............97 HE42BU/05................100 HE4HNWPR/09...........98 GMH3.........................110 HE16HWPR/02............99 HE42BU/06................100 HE4HNWPR/10...........98 GMH4.........................110 HE16HWPR/03............99 HE42BU/07................100 HE4HNWPR/11............98 GMH5.........................110 HE16HWPR/04............99 HE42BU/08................100 HE4HNWPR/12...........98 GMH6.........................110 HE16HWPR/05............99 HE42BU/09................100 HE4WPR/02.................96 GMH7.........................110 HE16HWPR/06............99 HE42BU/10................100 HE4WPR/03.................96 GMH8.........................110 HE16HWPR/07............99 HE42BU/11................100 HE4WPR/04.................96 GMH8N......................110 HE16HWPR/08............99 HE42BU/12................100 HE4WPR/05.................96 GT10U.........................17 HE16HWPR/09............99 HE42SBU/02..............101 HE4WPR/06.................96 H4..............................105 HE16HWPR/10............99 HE42SBU/03..............101 HE4WPR/07.................96 H6..............................105 HE16HWPR/11............99 HE42SBU/04..............101 HE4WPR/08.................96 HCL10-12...................104 HE16HWPR/12............99 HE42SBU/05..............101 HE4WPR/09.................96 HCL10-2.....................104 HE16WPR/02...............97 HE42SBU/06..............101 HE4WPR/10.................96 HCL10-3.....................104 HE16WPR/03...............97 HE42SBU/07..............101 HE4WPR/11.................96 HCL10-4.....................104 HE16WPR/04...............97 HE42SBU/08..............101 HE4WPR/12.................96 HCL12-12...................104 HE16WPR/05...............97 HE42SBU/09..............101 HE6HWPR/02..............99 HCL12-2.....................104 HE16WPR/06...............97 HE42SBU/10..............101 HE6HWPR/03..............99 HCL12-3.....................104 HE16WPR/07...............97 HE42SBU/11..............101 HE6HWPR/04..............99 HCL12-4.....................104 HE16WPR/08...............97 HE42SBU/12..............101 HE6HWPR/05..............99 HCL15-12...................104 HE16WPR/09...............97 HE42SST/02..............101 HE6HWPR/06..............99 HCL15-2.....................104 HE16WPR/10...............97 HE42SST/03..............101 HE6HWPR/07..............99 HCL15-3.....................104 HE16WPR/11...............97 HE42SST/04..............101 HE6HWPR/08..............99 HCL15-4.....................104 HE16WPR/12...............97 HE42SST/05..............101 HE6HWPR/09..............99 HCL8-12.....................104 HE1HWPR/02..............98 HE42SST/06..............101 HE6HWPR/10..............99 HCL8-2.......................104 HE1HWPR/03..............98 HE42SST/07..............101 HE6HWPR/11..............99 HCL8-3.......................104 HE1HWPR/04..............98 HE42SST/08..............101 HE6HWPR/12..............99 HCL8-4.......................104 HE1HWPR/05..............98 HE42SST/09..............101 HE6WPR/02.................97 132 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

INDEX Cat. No. Page Cat. No. Page Cat. No. Page HE6WPR/03.................97 MT6............................111 TM5............................110 HE6WPR/04.................97 MT6F..........................111 TPSLS..........................26 HE6WPR/05.................97 MT8............................111 TX2.5...........................87 HE6WPR/06.................97 MT9............................111 TX4..............................87 HE6WPR/07.................97 MT9F..........................111 TX6..............................87 HE6WPR/08.................97 MTG1.........................110 WLX10.......................108 HE6WPR/09.................97 MTG2.........................110 WLX2.5......................108 HE6WPR/10.................97 NEB10..........................36 WLX4.........................108 HE6WPR/11.................97 NEB6............................36 WLX6.........................108 HE6WPR/12.................97 NES..............................36 HEP4/16H..................104 ODL2.5.........................13 JX10/2..........................86 ODL2.5(I.S)..................13 JX2.5/10.......................86 ODL4U.........................12 JX2.5/2.........................86 ODLG2.5......................13 JX2.5/3.........................86 ODLG2.5(I.S)...............13 JX2.5/4.........................86 PP2.5/4UN...................49 JX2.5/5.........................86 PP25UN.......................49 JX2.5/6.........................86 PP35UN.......................49 JX2.5/7.........................86 PP6/10U.......................49 JX2.5/8.........................86 PPCMT4................49, 89 JX4/10..........................86 PPCX4.........................87 JX4/16..........................86 PPCX4.3......................87 JX4/2............................86 PPCX4/4......................87 JX4/3............................86 PPCX6.........................87 JX4/4............................86 PSPTB35.....................60 JX4/8............................86 PSPTB70.....................60 JX6/10..........................86 PTB35/50.....................60 JX6/2............................86 PTB35/50SH................60 JX6/3............................86 PTB70/95.....................60 JX6/4............................86 PTB70/95SH................60 JXS10/2.5....................86 Q11/2...........................57 JXS10/4.......................86 QJ8/2...........................26 JXS6/2.5......................86 SLS2............................26 JXS6/4.........................86 SLS3............................26 LCCDS.........................26 SLS4............................26 LCSTH4DT..................57 SP2.5/4UN...................49 MH2.5............................6 SP6/10U.......................49 MH4...............................6 SPCDL4U....................49 MHPTB35....................60 SPCDLG2.5.................49 MT10..........................111 SPCMB4......................49 MT12..........................111 STH3............................56 MT16..........................111 STH4............................56 MT2............................111 STH4DT.......................57 MT2B4........................111 STH4DTFT...................57 MT2G.........................111 STH4DTSH..................57 MT3............................111 STH6............................56 MT4............................111 SWL10.......................108 MT5............................111 SWL4.........................108 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 133

TERMS & CONDITIONS STANDARD TERMS AND CONDITIONS OF SALE TITLE PATENT INDEMNITY - Title to the products of ALTECH shall remain with ALTECH - ALTECH shall defend or settle any suit or pro- until payment is made in full by Customer. Such reservation of title is for ceeding brought against Customer based on a claim that any equipment the purpose of securing the purchase price and shall not relieve Customer made to ALTECH design and furnished hereunder constitutes an infringe- of the duty to inspect the products upon receipt, to notify ALTECH of any ment of any existing United States patent, provided (ALTECH) is notified deficiencies or defects, and to exercise due care in the use, installation, promptly in writing and is given complete authorization and information re- operation, and maintenance of the products when on the premise of the quired for the defense, and ALTECH shall pay all damages and costs Customer or under the control of the Customer. Notwithstanding any reser- awarded against Customer, but shall not be responsible for any costs, ex- vation of title by ALTECH, risk of loss shall pass to customer at any time pense or compromise incurred or made by Customer without ALTECH’s of shipment. prior written consent. If any equipment is in ALTECH’s opinion likely to or SHIPMENT AND DELIVERY - All orders for destination in the mainland does become the subject of a claim for patent infringement, ALTECH may United States (less Hawaii, Alaska and non-continental United States pos- at its option and expense procure for Customer the right to continue using sessions) will be shipped F.O.B. Flemington, N.J. All destination, shipping the device, modify it to become non-infringing, but in the event ALTECH is and other charges shall be paid by the Customer in accordance with AL- not reasonably able to modify, substitute, or otherwise procure for Cus- TECH’s then current shipping and billing practices. tomer the right to continue using it, ALTECH will remove such equipment Delivery dates given in the acceptance of any order are approximate. and refund to Customer the amount paid in excess of a reasonable rental ALTECH shall not be liable for delays in delivery or in performance due to for past use. causes beyond its reasonable control including acts of God, acts of Cus- ALTECH shall not be liable for any infringement or claim based upon tomer, acts of civil or military authority, fires, strikes or other labor distur- use of the equipment in combination with other equipment not supplied by bances, war, riot or delays in transportation. In the event of such delay, ALTECH or with modifications made by Customer. the date of delivery or performance shall be extended for a period equal The foregoing states the entire liability of ALTECH to Customer arising to thPeR tIimCEe lost by reason of the delay. fromS pEaLtLeEnRt i’nSf rRinEgMemEeDnIEt.S - PRICES in any ALTECH publication are subject to change - Should Customer fail to make any payment without prior notification. Catalog prices are based on prices published in within ten (10) days of its due date, or fail to perform any other of the Cus- the current price list. All written quotations are valid for thirty (30) days from tomer’s obligation hereunder upon thirty (30) days written notice, or should the date of quotation. Customer shall pay all sales, use, excise or similar Customer be or become insolvent or be a party to any bankruptcy receiver- taxes whenever ALTECH must itself pay and/or collect such tax from Cus- ship proceeding prior to full payment of all amounts payable hereunder, tomer arising out of the sale. ALTECH may: (a) with or without demand or notice to customer declare PAYMENT the entire amount unpaid immediately due and payable; (b) enter upon - Customer agrees to make payment within thirty (30) days the premises where the equipment may be found and remove it (Customer of date of the invoice from ALTECH. Customer agrees to pay a late pay- shall assemble the equipment and make it available to ALTECH at a place ment charge of one and one-half percent (1.5% per month, or the maxi- reasonably convenient to both parties and shall permit and assist ALTECH mum late payment charge permitted by applicable law, whichever is less, in effecting the retaking and removal of the equipment); and (c) sell any on any unpaid amount for each calendar month (or fraction thereof) that or all the equipment as permitted under applicable law, applying the pro- such payment is in default. Orders amounting to less than $100.00 will be ceeds of the sale to payment of the expenses of retaking, repairing and billed at $100.00 plus freight. Full carton purchases are required. In the selling the equipment, reasonable attorney fees and to the satisfaction of event of referral to an attorney for collection, reasonable attorney’s fees all indebtedness then due and unpaid under this Agreement. Any surplus for collection of the overdue amount shall be paid by Customer. In the shall be paid to Customer and any deficiency shall be paid to ALTECH by event payment is not received within 30 days from the date of invoice, any Customer. discLoIuMntI TsEhDal Wl bAeR cRaAncNeTllYed and the full list price will be due. The remedies provided herein shall be cumulative and in addition to - ALTECH warrants to Customer that the equip- all other remedies provided by law or equity or under the Uniform Com- ment purchases shall be free from defects in material and workmanship mercial Code. GOVERNING LAW under normal use and service for a period of one year from shipment. - This agreement will be governed by the Laws of Written notice as an explanation of the circumstances of any claim that the State of New Jersey. the equipment has proved defective in material or workmanship shall be GENERAL given promptly by the Customer to ALTECH. - This Agreement shall only become effective and binding ALTECH will not be liable for any misuse, improper operations, im- when either (a) it has been accepted and executed by an authorized rep- proper installation, improper maintenance, alteration, modification, acci- resentative of ALTECH, or (b) the equipment has been shipped to Cus- dent or unusual degradation of the equipment or parts due to an unsuitable tomer, with or without acceptance in writing hereon. Notice of acceptance installation environment. is hereby waived by Customer. Customer hereby acknowledges receipt No representation of other affirmation of facts, including but not limited of a true and complete copy hereof. to statements regarding capacity, suitability for use or performance of the No addition to or modification of any of the Terms and Conditions of equipment, shall be or be deemed to be a warranty or representation by Sale as they appear herein shall be binding upon ALTECH unless signed ALTECH for any purpose, nor give rise to any liability or obligation of AL- in writing by duly authorized representative of ALTECH in Flemington, N.J. TECH whatsoever. Typographical and clerical errors in quotations, orders and acknowl- Customer’s sole and exclusive remedy in the event of breach of war- edgments are subject to correction. ranty, as set forth herein, is expressly limited to (1) the correction of the This Agreement is not assignable without the prior written consent of defect by adjustment, repair, modification, or replacement, or (2) issuance ALTECH. Any attempt to assign any of the rights, duties or obligations of of a credit or refund of the purchase price for the defective equipment at this Agreement without such consent is void. ALTECH’s election and sole expense. If any provision or provisions of this Agreement shall be held to be in- EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, valid, illegal or unenforceable, the validity, legality and enforceability, of THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED IN- the remaining provisions shall not in any way be affected or impaired CLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR thereby. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALTECH is not responsible for failure to fulfill its obligation under this THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROM AL- Agreement due to causes beyond its control, or except as agreed herein. TECH OR ITS AUTHORIZED DISTRIBUTOR. THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE LIMITATION OF LIABILITY AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY - IN NO EVENT, SHALL ALTECH BE LI- ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER ABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL, CONSEQUEN- AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT TIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF ANY BREACH OF THE AGREEMENT BETWEEN THE PARTIES, WHICH SUPER- OF THIS AGREEMENT OR OBLIGATIONS UNDER THE AGREEMENT. SEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRIT- ALTECH SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY TEN, EXPRESSED OR IMPLIED, AND ALL OTHER COMMUNICATIONS DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF EQUIP- BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF MENT OR SERVICES UNDER THIS AGREEMENT. THIS AGREEMENT. No action arising out of any claimed breach of this Agreement may be brought by either party more than two (2) years after the cause of action has accrued. 134 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490

OTHER PRODUCTS ALTECH OFFERS A LARGE SELECTION OF AUTOMATION AND CONTROL COMPONENTS Circuit Protection Devices Industrial Enclosures Altech the market leader in UL508 Manual Altech offers a broad selection of non-metallic Motor Controllers/ Miniature Circuit Breakers and aluminum Industrial Enclosures to meet now introduces UL489 Miniature Circuit your diverse design requirements. Sizes range Breakers and UL1077 Supplementary Protec- from 1.97 x 2.05 x 1.38 to 35.43 x 11.81 x 5.59 tors. The UL489 versions are DIN rail mounted, inches. Materials include polycarbonate, poly- 17.5mm wide, thermal magnetic, 240V, styrene, polypropylene, ABS or aluminum. 480Y/277V AC, 50/60Hz, 125 and 250 VDC Polycarbonate and aluminum series have models, with short circuit interrupt capacity of been recently expanded. Protection up to IP67 10kA, a positive trip indicator, and are line/load (NEMA 4, 4X). Smooth sidewalls or sidewalls reversible. The UL1077 versions are DIN rail with knockouts. Enclosures can be mounted mounted, 17.5mm wide, thermal magnetic, directly onto a panel, frame or other mounting 480Y/277V AC, 50/60Hz, a short circuit with- surfaces. EMI / RFI Coating is available. Com- stand capacity 10kA, have a positive trip indi- petitive cover printing is available. Hinge Kits. cator. Altech Corp.® CAlutsetcohm Cizoartipo.n® available. 35 Royal Rd., Flemington, NJ 08822 35 Royal Rd., Flemington, NJ 08822 908-806-9400 908-806-9400 FAX 908-806-9490 FAX 908-806-9490 www.altechcorp.com www.altechcorp.com Smart Relays PCB Spring Clamp & Push-In Terminal Blocks Supports up to 48 I/Os (32 digital inputs & 16 New spring clamp printed circuit board termi- digital outputs). DST Feature Available. Backlit nal blocks with push-in technology. Fixed LCD Screen for display & modification of pre- push-in PCB terminals, PCB power terminals selected parameters of functional blocks, push-in, tension spring terminals and push-in viewing I/O status and programming on the plugs. device. PC software for programming, online & offline simulation, documentation & printing. Designed for use in automation for commercial & Industrial sectors. Modbus Communication. UL 508 (UL File No. E352868), IEC 61000-3-2 and IEC 61000-4-2-1~11. 250 lines of ladder programming. 16 soft text messages, Time Switches, Compare Counters, Timers, Coun- ters & 12 analog functions. Altech Corp.® Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 35 Royal Rd., Flemington, NJ 08822 908-806-9400 908-806-9400 www.altechcorp.com www.altechcorp.com Motor Disconnect Switches Power Supplies Altech’s line of Motor Disconnect Switches are Altech DIN RAIL mountable power supplies UL 508 listed as Manual Motor Controllers for have Universal AC input. They are suitable for AC Motor Starting Across-the-line and AC industrial and automation applications. UL508 General use. This new 16 page catalog in- Listed or UL Recognized. Single and Three cludes the 3 different handle designs, which phases up to 960W. Outputs of 5V, 12V, 15V, are all available in gray/black or yellow/red 24V and 48V. Class 2 devices are available. In- housings. Electrical ratings are 25-150A / stalled on DIN rail TS35/ 7.5 or 15. Protections 600V. The switches are non-fused DIN Rail of Short circuit / Overload / Overvoltage / Over mountable. Neat features include: snap-on temperature. Cooling by free air convection. auxiliary switches, door mounting kit and a All-In-One DC-UPS, battery based. Ultra Ca- retrofit 30A fuse holder. Also featured are En- pacitor DC-UPS, no battery required. World- closed Motor Disconnect Switches & Fused wide approvals. 3 year warranty. Enclosed Motor Disconnect Switch (30A) in plastic or stainless housings. Altech Corp.® 35 Royal Rd., Flemington, NJ 08822 Altech Corp.® 908-806-9400 35 Royal Rd., Flemington, NJ 08822 www.altechcorp.com 908-806-9400 www.altechcorp.com Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 135

Altech Corporation 35 Royal Road Flemington, NJ 08822-6000 P 908.806.9400 • F 908.806.9490 www.altechcorp.com Altech Corp.® 310-032017-3K 1 Printed March 2017

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A ltech: DDFL4U(E)LR/110 CTL2.5U-H(L)/24 CSCP2.5T2/BU CSCP2.5T2/BL CTL2.5U-H(L)/60 CTL2.5U-H(L)/48 CDL4U(I.S)/G CMT4/NEW CTS4U-N/G CTS35U/BU CTS35U/BG DDFL4U(E)LR/24 CMB4/2/BU CMB4/2/BL CTL2.5U-H(L) CENC4/BK CENC4/BU CDL4U(E)MOV CTL2.5U(L)/48 CTL2.5U(L)/24 CTL2.5U(L)/60 CTS6U/BL CTS6U/BU CTS6U/BG DDFL4U(E)/110 CSFL4U(O) CSC2.5T1-2/BU CSFL6U/R CMT4/BU CDL4U(I.S)/BU CTL2.5U-H(L)110 CMB4/3/NEW CTS2.5U-N/Y CTS2.5U-N/O CMT4S CTS16U/BL CTS25U/R CSCP2.5T2/R CDTTS CSFL6U/BU CTS2.5U-N/BG CDL4U CDL4U(I.S) CSFL4U/R CTS10U/O CTS10U/W CTS10U/R CTS10U/G CTS10U/Y CDL4U-TM CDL4U(E)RC DDFL4U(E)/24 CSFL4U(L)/110 CTS6U/R CTS6U/Y CTS6U/O CTS6U/G CTS6U/W CTL2.5U(L)/110 DDFL4U(E)/110BU CMB4/2/NEW DDFL4U(E)/110BL CDL4U(E)3LA/350 CTS25U/BL CSFL4U(L)/220 CTC4U CDL4U(E)3LA/250 CDL4U(E)3LA/230 CSFL4U(L)/48 CDL4U(E)3LA/90 DDFL4U(E)LR CTS10U/BU CTS10U/BL CDL4U(E)3LA/450 CMB4/2/R CMB4/16 CMB4/14 CMB4/18 CMB4/19 CMB4/15 CMB4/17 CMB4/13 CMB4/22 CMB4/20 CMB4/24 CMB4/23 CMB4/21 CDL4U/O CTS2.5U-N/DB DB16/G DB16/W CTL2.5U/BU CTS35U MT6/H-231-240 MT6/H-241-250 MT6/H-301-310 MT6/V-21 MT6/H-221- 230 MT6/H-T MT6/V-1