图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: BLM15BA050SN1D
  • 制造商: Murata
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

BLM15BA050SN1D产品简介:

ICGOO电子元器件商城为您提供BLM15BA050SN1D由Murata设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 BLM15BA050SN1D价格参考¥0.08-¥0.22。MurataBLM15BA050SN1D封装/规格:铁氧体磁珠和芯片, 。您可以下载BLM15BA050SN1D参考资料、Datasheet数据手册功能说明书,资料中有BLM15BA050SN1D 详细功能的应用电路图电压和使用方法及教程。

产品参数 图文手册 常见问题
参数 数值
产品目录

滤波器

DC电阻(DCR)

100 毫欧最大

描述

FERRITE CHIP 5 OHM 300MA 0402EMI滤波珠子、芯片与阵列 5 Ohm 25%

产品分类

铁氧体磁珠和芯片

品牌

Murata Electronics North America

产品手册

点击此处下载产品Datasheet

产品图片

rohs

符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求

产品系列

EMI滤波珠子、芯片与阵列,Murata Electronics BLM15BA050SN1DEMIFIL®, BLM15B

数据手册

点击此处下载产品Datasheet点击此处下载产品Datasheet

产品型号

BLM15BA050SN1D

不同频率时的阻抗

5 欧姆 @ 100MHz

产品

Ferrite Chip Beads

产品目录绘图

产品目录页面

点击此处下载产品Datasheet

产品种类

EMI滤波珠子、芯片与阵列

其它名称

490-5179-2

包装

带卷 (TR)

商标

Murata Electronics

外壳宽度

0.5 mm

外壳长度

1 mm

外壳高度

0.5 mm

大小/尺寸

0.039" 长 x 0.020" 宽(1.00mm x 0.50mm)

安装类型

表面贴装

容差

25 %

封装

Reel

封装/外壳

0402(1005 公制)

封装/箱体

0402 (1005 metric)

尺寸

0.5 mm W x 1 mm L x 0.5 mm H

工作温度范围

- 55 C to + 125 C

工具箱

/product-detail/zh/EKEMBL15Q/490-5681-ND/2663484/product-detail/zh/EKEMBL15L/490-5445-ND/2256880/product-detail/zh/EKEMBL15J/490-5232-ND/1952941

工厂包装数量

10000

最大直流电流

300 mA

最大直流电阻

100 mOhms

标准包装

10,000

测试频率

100 MHz

滤波器类型

差模 - 单线

电容

-

端接类型

SMD/SMT

阻抗

5 Ohms

额定电流

300mA

高度(最大值)

0.022"(0.55mm)

推荐商品

型号:BLM18HD601SN1D

品牌:None

产品名称:滤波器

获取报价

型号:2512061217Y0

品牌:Fair-Rite Products Corp.

产品名称:滤波器

获取报价

型号:MMZ0603S100CT000

品牌:TDK Corporation

产品名称:滤波器

获取报价

型号:HI1206T161R-10

品牌:Laird-Signal Integrity Products

产品名称:滤波器

获取报价

型号:FBA04HA600KD-00

品牌:Taiyo Yuden

产品名称:滤波器

获取报价

型号:742792701

品牌:Wurth Electronics Inc.

产品名称:滤波器

获取报价

型号:MPZ0603S220CT000

品牌:TDK Corporation

产品名称:滤波器

获取报价

型号:CIC10J600NC

品牌:Samsung Electro-Mechanics

产品名称:滤波器

获取报价

样品试用

万种样品免费试用

去申请
BLM15BA050SN1D 相关产品

CIC10P600NC

品牌:Samsung Electro-Mechanics

价格:

BLM21BD102SN1D

品牌:Murata Electronics North America

价格:

MPZ2012S221AT000

品牌:TDK Corporation

价格:

28L0138-10R-10

品牌:Laird-Signal Integrity Products

价格:

MMZ1608D121BTA00

品牌:TDK Corporation

价格:

742792656

品牌:Wurth Electronics Inc.

价格:¥0.73-¥0.73

742792022

品牌:Wurth Electronics Inc.

价格:

BLM15PX181SN1D

品牌:Murata Electronics North America

价格:¥0.21-¥0.91

PDF Datasheet 数据手册内容提取

Reference Only Reference Spec.No.JENF243A-0018AK-01 P1/11 Chip Ferrite Bead BLM15□□□□□SN1□ REFERENCE SPECIFICATION 1.Scope This reference specification applies to Chip Ferrite Bead BLM15_SN series. 2.Part Numbering (ex.) BL M 15 AG 100 S N 1 D (1) (2) (3) (4) (5) (6) (7) (8) (9) (1)Product ID (2)Type (3)Dimension(L×W) (4)Characteristics (5)Typical Impedance at 100MHz (6)Performance (7)Category (8)Numbers of Circuit (9)Packaging(D:Taping / B:Bulk) 3.Rating Impedance () DC Resistance (at 100MHz,Under Standard ( max.) Customer MURATA Rated Current Testing Condition) Initial Values Remark Part Number Part Number (mA) Values After Typical Testing BLM15AG100SN1D 5~15 10 1000 0.025 0.05 BLM15AG100SN1B BLM15AG700SN1D 40~100 70 600 0.15 0.20 BLM15AG700SN1B BLM15AG121SN1D 120±25% 120 550 0.19 0.29 BLM15AG121SN1B BLM15AG221SN1D 220±25% 220 450 0.29 0.39 BLM15AG221SN1B BLM15AG601SN1D 600±25% 600 300 0.52 0.62 BLM15AG601SN1B BLM15AG102SN1D 1000±25% 1000 300 0.65 0.75 BLM15AG102SN1B BLM15AX100SN1D For 5~15 10 1740 0.015 0.025 general BLM15AX100SN1B use BLM15AX300SN1D 30±25% 30 1100 0.06 0.11 BLM15AX300SN1B BLM15AX700SN1D 70±25% 70 780 0.10 0.15 BLM15AX700SN1B BLM15AX121SN1D 120±25% 120 700 0.13 0.18 BLM15AX121SN1B BLM15AX221SN1D 220±25% 220 600 0.18 0.23 BLM15AX221SN1B BLM15AX601SN1D 600±25% 600 500 0.34 0.39 BLM15AX601SN1B BLM15AX102SN1D 1000±25% 1000 350 0.49 0.54 BLM15AX102SN1B BLM15BA050SN1D 5±25% 5 300 0.10 0.15 BLM15BA050SN1B BLM15BB050SN1D 5±25% 5 500 0.08 0.15 BLM15BB050SN1B BLM15BA100SN1D 10±25% 10 300 0.20 0.25 BLM15BA100SN1B For BLM15BB100SN1D 10±25% 10 300 0.10 0.15 high speed BLM15BB100SN1B signal line BLM15BA220SN1D 22±25% 22 300 0.30 0.35 BLM15BA220SN1B BLM15BB220SN1D 22±25% 22 300 0.20 0.30 BLM15BB220SN1B BLM15BA330SN1D 33±25% 33 300 0.40 0.45 BLM15BA330SN1B MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P2/11 Impedance () DC Resistance (at 100MHz,Under Standard (Note) ( max.) Customer MURATA Testing Condition) Rated Current Initial Values Remark Part Number Part Number (mA) Values After Typical Testing BLM15BA470SN1D 47±25% 47 200 0.60 0.65 BLM15BA470SN1B BLM15BB470SN1D 47±25% 47 300 0.35 0.45 BLM15BB470SN1B BLM15BA750SN1D 75±25% 75 200 0.80 0.85 BLM15BA750SN1B BLM15BB750SN1D 75±25% 75 300 0.40 0.50 BLM15BB750SN1B BLM15BD750SN1D 75±25% 75 300 0.20 0.30 BLM15BD750SN1B BLM15BB121SN1D 120±25% 120 300 0.55 0.65 BLM15BB121SN1B BLM15BD121SN1D 120±25% 120 300 0.30 0.4 BLM15BD121SN1B BLM15BB221SN1D 220±25% 220 200 0.80 0.90 BLM15BB221SN1B BLM15BC121SN1D 120±25% 120 350 0.45 0.50 BLM15BC121SN1B BLM15BD221SN1D 220±25% 220 300 0.40 0.50 BLM15BD221SN1B BLM15BD471SN1D 470±25% 470 200 0.60 0.70 BLM15BD471SN1B BLM15BC241SN1D For 240±25% 240 250 0.70 0.75 BLM15BC241SN1B high speed BLM15BD601SN1D signal line 600±25% 600 200 0.65 0.75 BLM15BD601SN1B BLM15BD102SN1D 1000±25% 1000 200 0.90 1.0 BLM15BD102SN1B BLM15BD152SN1D 1500±25% 1500 190 1.0 1.1 BLM15BD152SN1B BLM15BD182SN1D 1800±25% 1800 100 1.4 1.5 BLM15BD182SN1B BLM15BX750SN1D 75±25% 75 600 0.15 0.20 BLM15BX750SN1B BLM15BX121SN1D 120±25% 120 600 0.17 0.22 BLM15BX121SN1B BLM15BX221SN1D 220±25% 220 450 0.27 0.32 BLM15BX221SN1B BLM15BX471SN1D 470±25% 470 350 0.41 0.46 BLM15BX471SN1B BLM15BX601SN1D 600±25% 600 350 0.46 0.51 BLM15BX601SN1B BLM15BX102SN1D 1000±25% 1000 300 0.65 0.75 BLM15BX102SN1B BLM15BX182SN1D 1800±25% 1800 250 0.90 1.0 BLM15BX182SN1B MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P3/11 Impedance () (Note) DC Resistance (at 100MHz,Under Standard Rated Current ( max.) Customer MURATA Testing Condition) (mA) Initial Values Remark Part Number Part Number Values After Typical at 85℃ at 125℃ Testing BLM15PG100SN1D 5~15 10 1000 0.025 0.05 BLM15PG100SN1B BLM15PD300SN1D 30±25% 30 2200*1 1400*1 0.035 0.05 BLM15PD300SN1B BLM15PD600SN1D 60±25% 60 1700*1 1100*1 0.06 0.075 BLM15PD600SN1B BLM15PD800SN1D 80±25% 80 1500*1 1000*1 0.07 0.085 BLM15PD800SN1B BLM15PD121SN1D 120±25% 120 1300*1 900*1 0.09 0.105 BLM15PD121SN1B BLM15PX330SN1D 33±25% 33 3000*1 1700*1 0.022 0.037 BLM15PX330SN1B BLM15PX600SN1D 60±25% 60 2500*1 1400*1 0.032 0.047 BLM15PX600SN1B BLM15PX800SN1D 80±25% 80 2300*1 1300*1 0.038 0.053 BLM15PX800SN1B BLM15PX121SN1D For DC 120±25% 120 2000*1 1100*1 0.055 0.070 BLM15PX121SN1B power line BLM15PX181SN1D 180±25% 180 1500*1 800*1 0.090 0.105 BLM15PX181SN1B BLM15PX221SN1D 220±25% 220 1400*1 800*1 0.10 0.115 BLM15PX221SN1B BLM15PX331SN1D 330±25% 330 1200*1 700*1 0.15 0.165 BLM15PX331SN1B BLM15PX471SN1D 470±25% 470 1000*1 600*1 0.20 0.22 BLM15PX471SN1B BLM15PX601SN1D 600±25% 600 900*1 500*1 0.23 0.25 BLM15PX601SN1B BLM15KD200SN1D 20±25% 20 3800*1 2350*1 0.011 0.016 BLM15KD200SN1B BLM15KD300SN1D 30±25% 30 3100*1 1900*1 0.017 0.022 BLM15KD300SN1B BLM15KD121SN1D 120±25% 120 1500*1 930*1 0.070 0.085 BLM15KD121SN1B ■Operating Temperature : -55°C to +125°C ■Storage Temperature : -55°C to +125°C ) nt(A Ratedcautr8re5n°tC (Note) As for the Rated current marked with *1, rre Rated Current is derated as right figure Cu Ratedcurrent depending on the operating temperature. d at125°C e at R 0 85 125 OperatingTemperature(°C) MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P4/11 4.Style and Dimensions 1.0±0.05 0.5±0.05 ■ Equivalent Circuit 05 0. ± 0.5 0.25±0.1 ( ) Resistance element becomes dominant at high frequencies. : Electrode ■ Unit Mass(Typical value) (inmm) 0.001g 5.Marking No marking. 6.Standard Testing Conditions  Unless otherwise specified   In case of doubt  Temperature : Ordinary Temp. (15 °C to 35 °C ) Temperature : 20°C±2 °C Humidity : Ordinary Humidity (25%(RH) to 85%(RH)) Humidity : 60%(RH) to 70%(RH) Atmospheric pressure : 86kPa to 106kPa 7.Specifications 7-1.Electrical Performance No. Item Specification Test Method 7-1-1 Impedance Meet item 3. Measuring Frequency : 100MHz±1MHz Measuring Equipment : KEYSIGHT4291A or the equivalent Test Fixture : KEYSIGHT16192A or the equivalent 7-1-2 DC Resistance Meet item 3. Measuring Equipment : Digital multi meter *Except resistance of the Substrate and Wire 7-2.Mechanical Performance No. Item Specification Test Method 7-2-1 Appearance Meet item 4. Visual Inspection and measured with Slide Calipers. And Dimensions 7-2-2 Bonding Meet Table 1. It shall be soldered on the substrate. Strength Applying Force(F) : 5N Table 1 Applying Time : 5s±1s A ppearance No damage Applying Direction: Parallel to the substrate. Impedance Side view Change Within ±30% F (at 100MHz) F DC R0.5 Meet item 3. Resistance Substrate 7-2-3 Bending It shall be soldered on the substrate. Strength Substrate: Glass-epoxy 100mm40mm0.8mm Deflection : 2.0mm Speed of Applying Force : 0.5mm/s Keeping Time : 30s Pressurejig R340 F Deflection 45mm 45mm Product MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P5/11 No. Item Specification Test Method 7-2-4 Vibration Meet Table 1. It shall be soldered on the substrate. Oscillation Frequency : 10Hz to 55Hz to 10Hz for 1 min Total Amplitude : 1.5mm Testing Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 h) 7-2-5 Resistance Pre-Heating : 150°C±10°C, 60s~90s to Soldering Solder : Sn-3.0Ag-0.5Cu Heat Solder Temperature : 270°C±5°C Immersion Time : 10s±0.5s Immersion and emersion rates : 25mm/s Then measured after exposure in the room conditionfor 48h±4h. 7-2-6 Drop Products shall be no failure It shall be dropped on concrete or steel board. after tested. Method : free fall Height : 75cm Attitude from which the product is dropped : 3 direction The number of times : 3 times for each direction(Total 9 times) 7ー2-7 Solderability The electrodes shall be at Flux : Ethanol solution of rosin,25(wt)% least 95% covered with new Pre-Heating : 150°C±10°C, 60s~90s solder coating. Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240°C±5°C Immersion Time : 3s±1s Immersion and emersion rates : 25mm/s 7-3.Environmental Performance It shall be soldered on the substrate. No. Item Specification Test Method 7-3-1 Temperature Meet Table 1. 1 cycle : Cycle 1 step : -55 °C(+0 °C,-3 °C) / 30min±3min 2 step : Ordinary temp. / 10min to 15min 3 step : +125 °C(+3 °C,-0 °C) / 30min±3min 4 step : Ordinary temp. / 10min to 15min Total of 100 cycles Then measured after exposure in the room condition for 48h±4h. 7-3-2 Humidity Temperature : 40°C±2°C Humidity : 90%RH to 95%RH Time : 1000h(+48h,-0h) Then measured after exposure in the room condition for 48h±4h. 7-3-3 Heat Life Meet Table 2. Temperature : 125°C±3°C Applying Current : Rated Current(at 125°C) Table 2 Time : 1000h(+48h,-0h) Appearance No damage Then measured after exposure in the room condition for Impedance Within ±30% 48h±4h. Change (for BLM15PD (at 100MHz) Within ±40%) DC Meet item 3. Resistance 7-3-4 Cold Meet Table 1. Temperature : -55±2°C Resistance Time : 1000h(+48h,-0h) Then measured after exposure in the room condition for 48h±4h. MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P6/11 8.Specification of Packaging 8-1.Appearance and Dimensions (8mm-wide paper tape) 1 2.0±0.05 0. 2.0±0.05 4.0±0.1 1.5+0.1 5± -0 7 . 1 5 0 Typ.) 3.5±0. ±0.3 5( 8.0 1 . 1 0.65(Typ.) 0.8max. Directionof Feed (inmm) (1) Taping Products shall be packaged in the cavity of the base tape of 8mm-wide, 2mm-pitch continuously and sealed by top tape and bottom tape. (2) Sprocket hole:Sprocket hole shall be located on the right hand side toward the direction of feed. (3) Spliced point:The base tape and top tape have no spliced point (4) Cavity:There shall not be burr in the cavity. (5) Missing components number Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater, and are not continuous. The specified quantity per reel is kept. 8-2.Tape Strength (1)Pull Strength Top tape 5N min. Bottom tape Toptape 165to180degree (2)Peeling off force of Cover tape F 0.1N to 0.6N (Minimum value is typical.) *Speed of Peeling off:300mm/min Bottomtape Basetape 8-3.Taping Condition (1)Standard quantity per reel Quantity per 180mm reel 10000 pcs. / reel (2)There shall be leader-tape(top tape and empty tape) and trailer- tape(empty tape) as follows. (3)On paper tape, the top tape and the base tape shall not be adhered at the tip of the empty leader tape for more than 5 pitch. (4)Marking for reel The following items shall be marked on a label and the label is stuck on the reel. (Customer part number, MURATA part number, Inspection number(1) , RoHS marking(2) , Quantity, etc) 1) « Expression of Inspection No. » □□ OOOO  (1) (2) (3) (1) Factory Code (2) Date First digit : Year / Last digit of year Second digit : Month / Jan. to Sep.  1 to 9, Oct. to Dec.  O,N,D Third, Fourth digit : Day (3) Serial No. 2) « Expression of RoHS marking » ROHS – Y (△) (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number (5)Outside package These reels shall be packed in the corrugated cardboard package and the following items shall be marked on a label and the label is sticked on the box. (Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS marking(2) ,Quantity, etc) MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P7/11 (6)Dimensions of reel and taping(leader-tape, trailer-tape) Trailer 2.0±0.5 160min. Leader Label 190min. 210min. Emptytape Toptape 13.0±0.2 60+-10 21.0±0.8 Directionof feed 9.0+-01 13.0±1.4 180+-30 (in mm) 8-4. Specification of Outer Case Outer Case Dimensions Standard Reel Quantity in Outer Case Label (mm) (Reel) W D H H 186 186 93 5 D Above Outer Case size is typical. It depends on a quantity of an order. W 9. ! Caution 9-1. Surge current Excessive surge current ( pulse current or rush current) than specified rated current applied to the product may cause a critical failure, such as an open circuit, burnout caused by excessive temperature rise. Please contact us in advance in case of applying the surge current. 9-2.Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1)Aircraft equipment (2)Aerospace equipment (3)Undersea equipment (4)Power plant control equipment (5)Medical equipment (6)Transportation equipment(automobiles,trains,ships,etc.) (7)Traffic signal equipment (8)Disaster prevention / crime prevention equipment (9)Data-processing equipment (10)Applications of similar complexity or with reliability requirements comparable to the applications listed in the above 10.Notice This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. 10-1.Land pattern designing Standard land dimensions (Reflow soldering) < For BLM15 series (except BLM15P□, BLM15AX, BLM15KD type) > ChipFerriteBead c Soldering a b c a SolderResist Reflow 0.4 1.2 0.5 b Pattern (in mm) MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P8/11 < For BLM15P□, BLM15AX, BLM15KD type > ChipFerriteBead Rated Land pad thickness Current a b c and dimension d (A) 18µm 35µm 70µm c d 1.5 Max 0.5 0.5 0.5 2.2 Max 0.4 1.2 0.5 1.2 0.7 0.5 3.0 Max 2.4 1.2 0.5 SolderResist (in mm) a The excessive heat by land pads may cause b Pattern deterioration at joint of products with substrate. 10-2.Soldering Conditions Products can be applied to reflow soldering. (1) Flux,Solder Flux Use rosin-based flux, but not highly acidic flux (with chlorine content exceeding 0.2(wt)%. ) Do not use water-soluble flux. Solder Use Sn-3.0Ag-0.5Cu solder Standard thickness of solder paste : 100 µm to 200 m (2) Soldering conditions Pre-heating should be in such a way that the temperature difference between solder and ferrite surface is limited to 150℃ max. Also cooling into solvent after soldering should be in such a way that the temperature difference is limited to 100℃ max. Insufficient pre-heating may cause cracks on the ferrite, resulting in the deterioration of product quality. Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of product quality. (3) Soldering profile Temp. 260℃ (℃) 245℃±3℃ 230℃ 220℃ Limit Profile 180 150 30s~60s Standard Profile 60s max. 90s±30s Time.(s) Standard Profile Limit Profile Pre-heating 150~180°C 、90s±30s Heating above 220°C、30s~60s above 230°C、60s max. Peak temperature 245±3°C 260°C,10s Cycle of reflow 2 times 2 times 10-3. Reworking with soldering iron Pre-heating: 150°C, 1 min Soldering iron output: 80W max. Tip temperature: 350°C max.  Tip diameter:φ3mm max. Soldering time : 3(+1,-0) seconds.  Times : 2times max. Note :Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the ferrite material due to the thermal shock. MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P9/11 10-4.Solder Volume Solder shall be used not to be exceed as shown below. UpperLimit Recommendable t 1/3T≦t≦T (T:Chip thickness) Accordingly increasing the solder volume, the mechanical stress to product is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. 10-5.Attention regarding P.C.B. bending The following shall be considered when designing and laying out P.C.B.'s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress for board warpage. <Products direction> a Products shall be located in the sideways b direction (Length:ab) to the mechanical stress. 〈Poorexample〉 〈Goodexample〉 (2) Components location on P.C.B. separation. It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress. Contents of Measures Stress Level (1) Turn the mounting direction of the component parallel to the board separation surface. A > D *1 (2) Add slits in the board separation part. A > B (3) Keep the mounting position of the component away from the board separation surface. A > C C Perforation B D A Slit *1 A > D is valid when stress is added vertically to the perforation as with Hand Separation. If a Cutting Disc is used, stress will be diagonal to the PCB, therefore A > D is invalid. (3) Mounting Components Near Screw Holes When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw. Mount the component in a position as far away from the screw holes as possible. Screw Hole Recommended 10-6.Mounting density Add special attention to radiating heat of products when mounting the inductor near the products with heating. The excessive heat by other products may cause deterioration at joint of this product with substrate. MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P10/11 10-7.Operating Environment Do not use this product under the following environmental conditions, on deterioration of the Insulation Resistance of the Ferrite material and/or corrosion of Inner Electrode may result from the use. (1) in the corrodible atmosphere such as acidic gases, alkaline gases, chlorine, sulfur gases, organic gases and etc. (the sea breeze, Cl2, H2S, NH3, SO2, NO2,etc) (2) in the atmosphere where liquid such as organic solvent, may splash on the products. (3) in the atmosphere where the temperature / humidity changes rapidly and it is easy to dew. 10-8.Resin coating The impedance value may change and/or it may affect on the product's performance due to high cure-stress of resin to be used for coating / molding products. So please pay your careful attention when you select resin. In prior to use, please make the reliability evaluation with the product mounted in your application set. 10-9.Cleaning Conditions Products shall be cleaned on the following conditions. (1)Cleaning temperature shall be limited to 60°C max. (40°C max. for IPA.) (2)Ultrasonic cleaning shall comply with the following conditions, avoiding the resonance phenomenon at the mounted products and P.C.B. Power:20W/ max. Frequency:28kHz to 40kHz Time:5 min max. (3)Cleaner 1.Alternative cleaner Isopropyl alcohol (IPA) 2.Aqueous agent PINE ALPHA ST-100S (4)There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5)Other cleaning Please contact us. 10-10. Handling of a substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. Bending Twisting 10-11.Storage Conditions (1)Storage period Use the products within 6 months after delivered. Solderability should be checked if this period is exceeded. (2)Storage conditions Products should be stored in the warehouse on the following conditions. Temperature : -10°C to 40°C Humidity : 15% to 85% relative humidity No rapid change on temperature and humidity Don't keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidization of electrode, resulting in poor solderability.  Products should be stored on the palette for the prevention of the influence from humidity, dust and so on. Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on. Products should be stored under the airtight packaged condition. (3)Delivery Care should be taken when transporting or handling product to avoid excessive vibration or mechanical shock. MURATA MFG.CO.,LTD.

Reference Only Reference Spec.No.JENF243A-0018AK-01 P11/11 11. ! Note (1)Please make sure that your product has been evaluated in view of your specifications with our product being mounted to your product. (2) You are requested not to use our product deviating from the reference specifications. (3) The contents of this reference specification are subject to change without advance notice. Please approve our product specifications or transact the approval sheet for product specifications before ordering. MURATA MFG.CO.,LTD.