® RF360 Europe GmbH A Qualcomm – TDK Joint Venture SAW Components SAW RF filter Short range devices Series/type: B3717 Ordering code: B39871B3717U410 Date: December 29, 2014 Version: 2.3 RF360 products mentioned within this document are offered by RF360 Europe GmbH and other subsidiaries of RF360 Holdings Singapore Pte. Ltd. (collectively, the “RF360 Subsidiaries”). RF360 Holdings Singapore Pte. Ltd. is a joint venture of Qualcomm Global Trading Pte. Ltd. and EPCOS AG. References in this documentation to EPCOS AG should properly reference, and shall be read to reference, the RF360 Subsidiaries. RF360 Europe GmbH, Anzinger Str. 13, München, Germany © 2016 RF360 Europe GmbH and/or its affiliated companies. All rights reserved.

These materials, including the information contained herein, may be used only for informational purposes by thecustomer. The RF360 Subsidiaries assume no responsibility for errors or omissions in these materials or theinformation contained herein. The RF360 Subsidiaries reserve the right to make changes to the product(s) orinformation contained herein without notice. The materials and information are provided on an AS IS basis, andthe RF360 Subsidiaries assume no liability and make no warranty or representation, either expressed or implied, with respect to the materials, or any output or results based on the use, application, or evaluation of suchmaterials, including, without limitation, with respect to the non-infringement of trademarks, patents, copyrights or any other intellectual property rights or other rights of third parties. No use of this documentation or any information contained herein grants any license, whether express, implied, by estoppel or otherwise, to any intellectual property rights, including, without limitation, to any patents owned byQUALCOMM Incorporated or any of its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of RF360 Europe GmbH. Qualcomm and Qualcomm RF360 are trademarks of Qualcomm Incorporated, registered in the United States andother countries. RF360 is a trademark of Qualcomm Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversioncontrary to U.S. and international law is strictly prohibited.

SAW Components SAW RF filter Short range devices Series/type: B3717 Ordering code: B39871B3717U410 Date: December 29, 2014 Version: 2.3 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet Application n Low-loss RF filter for remote control receivers n No matching network required for operation at 50W Features n Package size 3.0 x 3.0 x 1.1 mm3 n Package code DCC6C n RoHS compatible n Approximate weight 0.037 g n Package forSurfaceMountTechnology (SMT) n Ni, gold-plated terminals n Lead free soldering compatible with J - STD20C n Passivation layer Elpas n AEC-Q200 qualified component family n ElectrostaticSensitiveDevice (ESD) Pin configuration n 2 Input n 5 Output n 1, 3, 4, 6 To be ground Please readcautions and warnings and 2 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet Characteristics Temperature range for specification: T = –40 ˚C to +85 ˚C Terminating source impedance: Z = 50W S Terminating load impedance: Z = 50W L min. typ. max. @ 25 ˚C Center frequency f — 866.5 — MHz C Maximum insertion attenuation a max 865.00 ... 868.00 MHz — 2.1 2.9 dB 863.00 ... 870.00 MHz — 2.2 3.8 dB Amplitude ripple(p-p) Da 865.00 ... 868.00 MHz — 0.1 1.1 dB 863.00 ... 870.00 MHz — 0.2 2.0 dB VSWR 863.00 ... 870.00 MHz — 1.5:1 2.2:1 Absolute attenuation a abs 10.00 ... 830.00 MHz 40 44 — dB 830.00 ... 845.00 MHz 32 40 — dB 880.00 ... 884.00 MHz 20 38 — dB 884.00 ... 887.00 MHz 36 54 — dB 887.00 ... 965.00 MHz 48 52 — dB 965.00 ... 1500.00 MHz 42 45 — dB Please readcautions and warnings and 3 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet Maximum ratings Operable temperature range T –45/+125 ˚C Storage temperature range T –45/+125 ˚C stg DC voltage V 6 V DC Source power P 13 dBm source impedance 50 W S Please readcautions and warnings and 4 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet ESD protection of SAW filters SAW filters areElectroStaticDischarge sensitive devices. To reduce the probability of damages caused by ESD, special matching topologies have to be applied. In general, “ESD matching” has to be ensured at that filter port, where electrostatic discharge is expected. Electrostatic discharges predominantly appear at the antenna input of RF receivers. Therefore only the input matching of the SAW filter has to be designed to short circuit or to block the ESD pulse. Below two figures show recommended “ESD matching” topologies. Depending on the input impedance of the SAW filter and the source impedance, the needed component values have to be determined from case to case. Ls3 Ls3 MLC1 Lp2 tmoa otcuhtpinugt Dp1 Lp2 mtoa otcuhtpinugt Fig. 1 MLC varistor plus ESD matching Fig.2SuppressordiodeplusESDmatching In cases where minor ESD occur, following simplified “ESD matching” topologies can be used alternatively. Ls2 Cs1 to output to output Lp1 matching Lp2 matching Fig. 3 shunt L – series L matching Fig. 4 series C – shunt L matching Effectiveness of the applied ESD protection has to be checked according to relevant industry standards or customer specific requirements. For further information, please refer to EPCOS Application report: “ESD protection for SAW filters”. This report can be found underwww.epcos.com/rke. Click on “data sheets” and then “Applications” under category “Further information”. Please readcautions and warnings and 5 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet Transfer function(narrowband) Transfer function(wideband) Please readcautions and warnings and 6 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet Smith charts S function 11 S function 22 Please readcautions and warnings and 7 December 29, 2014 important notes at the end of this document.

SAW Components B3717 SAW RF filter 866.5 MHz Data sheet References Type B3717 Ordering code B39871B3717U410 Marking and package C61157-A7-A67 Packaging F61074-V8168-Z000 Date codes L_1126 B3717_NB.s2p, B3717_WB.s2p S-parameters See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatiblemeansthatproductsarecompatiblewiththe requirementsaccordingtoArt.4 (substancerestrictions)ofDi- rective 2011/65/EU of the European Parliament and of the CouncilofJune8th, 2011,ontherestrictionoftheuseofcertain hazardous substances in electrical and electronic equipment ("Directive")withdueregardtotheapplicationofexemptionsas per Annex III of the Directive in certain cases. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. ForfurtherinformationpleasecontactyourlocalEPCOSsalesofficeorvisitourwebpageat www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY ª EPCOS AG 2014. This brochure replaces the previous edition. Forquestionsontechnology,pricesanddeliverypleasecontacttheSalesOfficesofEPCOSAGor the international Representatives. Duetotechnicalrequirementscomponentsmaycontaindangeroussubstances.Forinformationon the type in question please also contact one of our Sales Offices. Please readcautions and warnings and 8 December 29, 2014 important notes at the end of this document.

Important notes The following applies to all products named in this publication: 1. Somepartsofthispublicationcontainstatementsaboutthesuitabilityofourproductsfor certain areas of application. These statements are based on our knowledge of typical requirementsthatareoftenplacedonourproductsintheareasofapplicationconcerned.We nevertheless expressly point out that such statements cannot be regarded as binding statementsaboutthesuitabilityofourproductsforaparticularcustomerapplication. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the propertiesdescribedintheproductspecificationissuitableforuseinaparticularcustomer application. 2. We also point out that in individual cases, a malfunction of electronic components or failurebeforetheendoftheirusualservicelifecannotbecompletelyruledoutinthe currentstateoftheart,eveniftheyareoperatedasspecified.Incustomerapplications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by meansofsuitabledesignofthecustomerapplicationorotheractiontakenbythecustomer (e.g.installationofprotectivecircuitryorredundancy)thatnoinjuryordamageissustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. Inordertosatisfycertaintechnicalrequirements,someoftheproductsdescribedinthis publicationmaycontainsubstancessubjecttorestrictionsincertainjurisdictions(e.g. because they are classed as hazardous). Useful information on this will be found in our MaterialDataSheetsontheInternet(www.epcos.com/material).Shouldyouhaveanymore detailed questions, please contact our sales offices. 5. Weconstantlystrivetoimproveourproducts.Consequently,theproductsdescribedinthis publicationmaychangefromtimetotime.Thesameistrueofthecorrespondingproduct specifications.Pleasecheckthereforetowhatextentproductdescriptionsandspecifications contained in this publication are still applicable before or when you place an order. Wealsoreservetherighttodiscontinueproductionanddeliveryofproducts.Conse- quently, we cannot guarantee that all products named in this publication will always be available.Theaforementioneddoesnotapplyinthecaseofindividualagreementsdeviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current versionofthe“GeneralTermsofDeliveryforProductsandServicesintheElectrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS,DeltaCap,DigiSiMic,DSSP,FilterCap,FormFit,MiniBlue,MiniCell,MKD,MKK,MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCaparetrademarksregisteredorpendinginEuropeandinothercountries.Further information will be found on the Internet at www.epcos.com/trademarks. 9 December 29, 2014