ACAS 0612 - Precision www.vishay.com Vishay Beyschlag Precision Thin Film Chip Resistor Array FEATURES • Advanced thin film technology • Two pairs or four equal resistor values • Relative TCR down to ± 5 ppm/K (tracking) • Relative tolerance down to ± 0.05 % (matching) • Pure Sn termination on Ni barrier layer • Material categorization: For definitions of compliance The ACAS 0612 thin film chip resistor arrays combine the please see www.vishay.com/doc?99912 proven reliability of precision thin film chip resistor products with the advantages of chip resistor arrays. Defined relative APPLICATIONS tolerance (matching) and relative TCR (tracking) make this product perfectly suited for applications with outstanding • Precision analogue circuits requirements towards stable fixed resistor ratios. A small • Voltage divider package enables the design of high density circuits in • Feedback circuits combination with reduction of assembly costs. The ACAS is available with equal or different resistor values. • Signal conditioning TECHNICAL SPECIFICATIONS DESCRIPTION ACAS 0612 EIA size 0612 Metric size RR1632M Configuration, isolated 4 x 0603 Design: All equal AE Two pairs TP Resistance values 47  to 221 k (1) Absolute tolerance ± 0.1 % Relative tolerance ± 0.05 % Absolute temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K Relative temperature coefficient ± 15 ppm/K; ± 10 ppm/K; ± 5 ppm/K Max. resistance ratio R /R 1:5 min. max. Rated dissipation: P 70 Element 0.1 W Package, 4 x 0603 0.3 W Operating voltage 75 V Operating temperature range - 55 °C to 125 °C Permissible film temperature 125 °C (2) Insulation voltage (U ) against ambient and between ins 75 V isolated resistors, continuous Notes • The relative figures of tolerance, TCR and drift are related to a medial axis between the maximum and minimum permissable deviation of the resistor array. For detailed information please refer to the application note: Increasing Accuracy in Feedback Circuits and Voltage Dividers with Thin Film Chip Resistor Arrays (www.vishay.com/doc?28194). (1) Resistance values to be selected from E24; E192. (2) For higher max. film temperature and AEC-Q200 qualification please refer to data sheet ACAS 0606 AT, ACAS 0612 AT - Precision available on our web site at www.vishay.com/doc?28770. Revision: 12-Apr-13 1 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. MAXIMUM RESISTANCE CHANGE AT RATED POWER (1) DESCRIPTION ACAS 0612 Configuration, isolated 4 x 0603 Operation mode Precision Standard Rated power per element, P 0.032 W 0.1 W 70 Rated power per packaging, P 0.1 W 0.3 W 70 Film temperature 85 °C 125 °C Operating voltage, U AC/DC 25 V 75 V max. Max. resistance change at P70 R/R max., after: 1000 h ± 0.1 % ± 0.25 % 8000 h ± 0.25 % ± 0.5 % Max. relative resistance change (relative drift) at P70 R/R max., after: 1000 h ± 0.05 % ± 0.125 % 8000 h ± 0.125 % ± 0.25 % Note (1) Figures are given for arrays with equal values, design type AE. CIRCUITS R1 R2 R3 R4 ACAS 0612 DESIGN ACAS 0612 AE R = R = R = R 1 2 3 4 TP R = R < R = R 1 4 2 3 Revision: 12-Apr-13 2 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION Part Number: ACASA1100S2200P500 A C A S A 1 1 0 0 S 2 2 0 0 P 5 0 0 MODEL/ ACCURACY TERMINAL SIZE RESISTANCE (1) RESISTANCE (1) PACKAGING SPECIAL SIZE GRADE (2) ACA S = Convex A = 0612 3 digit TCR, tracking, 3 digit P1 00 = Standard square resistance tolerance and resistance P5 value R1, R4 matching value R2, R3 1 digit S, T, or U 1 digit multiplier multiplier MULTIPLIER MULTIPLIER 9 = *10-1 9 = *10-1 0 = *100 0 = *100 1 = *101 1 = *101 2 = *102 2 = *102 3 = *103 3 = *103 Product Description: ACAS 0612 110R S 220R P5 ACA S 0612 110R S 220R P5 RESISTANCE ACCURACY RESISTANCE MODEL/SIZE TERMINAL SIZE PACKAGING R , R (1) GRADE (2) R , R (1) 1 4 2 3 ACA = Chip S = Convex 0612 110R = 110  TCR, tracking, 220R = 220  P1 array square 1K1 = 1.1 k tolerance and 1K1 = 1.1 k P5 22K1 = 22.1 k matching 22K1 = 22.1 k S, T, or U Notes • Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION. (1) R1 = R4  R2 = R3. (2) For historical temperature coefficient and resistance ranges please refer to the end of the data sheet. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE ABSOLUTE RELATIVE ACCURACY RESISTANCE TYPE GRADE VALUE TCR TOLERANCE TCR TOLERANCE S ± 25 ppm/K ± 0.1 % ± 15 ppm/K ± 0.05 % 47  to 221 k ACAS 0612 T ± 15 ppm/K ± 0.1 % ± 10 ppm/K ± 0.05 % 47  to 150 k U ± 10 ppm/K ± 0.1 % ± 5 ppm/K ± 0.05 % 47  to 100 k Notes • For historical temperature coefficent and resistance range please refer to the end of the data sheet. • Relative TCR (tracking) down to ± 2.5 ppm/K on request. • Relative tolerance for resistance values < 80  on request. Revision: 12-Apr-13 3 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag PACKAGING PACKAGING TYPE CODE QUANTITY WIDTH PITCH REEL DIAMETER STYLE Tape and reel P1 1000 cardboard tape ACAS 0612 8 mm 4 mm 180 mm/7" acc. IEC 60286-3 P5 5000 Type I DIMENSIONS W A T2 T1 L H A1 A DIMENSION AND MASS L W H P A A T T MASS TYPE 1 1 2 (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mg) ACAS 0612 1.5 ± 0.15 3.2 ± 0.15 0.45 ± 0.1 0.8 ± 0.1 0.6 ± 0.1 0.4 ± 0.1 0.3 ± 0.15 0.4 ± 0.15 6.6 PATTERN STYLES FOR CHIP RESISTOR ARRAY ACAS 0612 U I X Y Dimensions in mm G Z limits for solder resist P 0.1 RECOMMENDED SOLDER PAD DIMENSIONS G Y X U Z I P TYPE (mm) (mm) (mm) (mm) (mm) (mm) (mm) ACAS 0612 0.7 0.7 0.64 0.5 2.1 0.3 0.8 Revision: 12-Apr-13 4 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag DESCRIPTION industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be The production of the components is strictly controlled and qualified by appropriate means to ensure the long-term follows an extensive set of instructions established for stability of the whole system. The resistors are RoHS reproducibility. A homogeneous film of metal alloy is compliant; the pure tin plating provides compatibility with deposited on a high grade (96 % Al O ) ceramic substrate 2 3 lead (Pb)-free and lead-containing soldering processes. The using a mask to separate the adjacent resistors and permitted storage time is 20 years, whereas the solderability conditioned to achieve the desired temperature coefficient. is specified for 2 years after production or requalification. Specially designed inner contacts are realized on both The immunity of the plating against tin whisker growth has sides. A special laser is used to achieve the target value by been proven under extensive testing. smoothly cutting a meander groove in the resistive layer without damaging the ceramics. All products comply with the GADSL (1) and the CEFIC-EECA-EICTA (2) list of legal restrictions on The resistor elements are covered by a protective coating hazardous substances. This includes full compliance with designed for electrical, mechanical and climatic protection. the following directives: The terminations receive a final pure tin on nickel plating. • 2000/53/EC End of Life Vehicle Directive (ELV) and The result of the determined production is verified by an Annex II (ELV II) extensive testing procedure and optical inspection performed on 100 % of the individual chip resistors. Only • 2011/65/EC Restriction of the use of Hazardous accepted products are laid directly into the paper tape in Substances directive (RoHS) accordance with IEC 60286-3 (3). • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) ASSEMBLY The resistors are suitable for processing on automatic TESTS SMD assembly systems. They are suitable for automatic Where applicable, the resistors are tested in accordance soldering using reflow or vapour phase as shown in with EN 140401-801 which refers to EN 60115-1 and IEC 61760-1 (3). The encapsulation is resistant to all EN 140400. cleaning solvents commonly used in the electronics Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org. (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org  policy  environmental policy group  chemicals  jig  Joint Industry Guide (JIG-101 Ed 2.0). (3) The quoted IEC standards are also released as EN standards with the same number and identical contents. FUNCTIONAL PERFORMANCE % n Standard Mode r i Precision Mode e w o 100 P d ate 80 R 60 40 20 0 - 55 0 50 70 85 100 125 150 180 Ambient Temperature in °C For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER Derating Revision: 12-Apr-13 5 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the category temperature; damp heat, long term, 56 days) is following specifications: valid (LCT = - 55 °C/UCT = 125 °C). EN 60115-1, generic specification Unless otherwise specified the following values apply: EN 140400, sectional specification Temperature: 15 °C to 35 °C EN 140401-801, detail specification Relative humidity: 45 % to 75 % The testing also covers most of the requirements specified Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar) by EIA/IS-703 and JIS-C-5202. The requirements stated in the “Test Procedures and The tests are carried out in accordance with IEC 60068 (1) Requirements” table are based on the required tests and and under standard atmospheric conditions according to permitted limits of EN 140401-801 where applicable. IEC 60068-1 (1), 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower category temperature, upper TEST PROCEDURES AND REQUIREMENTS IEC EN REQUIREMENTS 60 068-2 (1) 60 115-1 TEST PROCEDURE PERMISSIBLE CHANGE (2) TEST CLAUSE (R) METHOD Stability for product types: ACAS 0612 47  to 221 k 4.5 - Resistance - ± 0.1 % R At (20/-55/20) °C and 4.8.4.2 - Temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K (20/125/20) °C U = P70 x R or U = Umax.; 1.5 h on; 0.5 h off; whichever is the less severe; 1000 h: Endurance at 70 °C: Absolute ± (0.1 % R + 0.05 ) Precision operation mode Relative ± (0.05 % R + 0.05 ) 8000 h: Absolute ± (0.25 % R + 0.05 ) Relative ± (0.125 % R + 0.05 ) 4.25.1 - U = P x R or U = U ; 70 max. 1.5 h on; 0.5 h off; whichever is the less severe; 1000 h: Endurance at 70 °C: Absolute ± (0.25 % R + 0.05 ) Standard operation mode Relative ± (0.125 % R + 0.05 ) 8000 h: Absolute ± (0.5 % R + 0.05 ) Relative ± (0.25 % R + 0.05 ) 85 °C; 1000 h: Absolute ± (0.1 % R + 0.05 ) Endurance at upper Relative ± (0.05 % R + 0.05 ) 4.25.3 - category temperature 125 C; 1000 h: Absolute ± (0.25 % R + 0.05 ) Relative ± (0.125 % R + 0.05 ) Damp heat, (40 ± 2) °C; 56 days; 4.24 78 (Cab) ± (0.25 % R + 0.05) steady state (93 ± 3) % RH Short time overload (3) U = 2.5 x P x R or ± (0.1 % R + 0.01 ) 4.13 - 70 Standard operation mode U = 2 x U ; 5 s no visible damage max. 30 min at - 55 °C and Rapid change of ± (0.1 % R + 0.01) 4.19 14 (Na) 30 min at 125 °C; temperature no visible damage 5 cycles Revision: 12-Apr-13 6 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ACAS 0612 - Precision www.vishay.com Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS IEC EN REQUIREMENTS 60 068-2 (1) 60 115-1 TEST PROCEDURE PERMISSIBLE CHANGE (2) TEST CLAUSE (R) METHOD Stability for product types: ACAS 0612 47  to 221 k Reflow method 2 Resistance to soldering (IR/forced gas convection);  (0.1 % R + 0.01 ) 4.18.2 58 (Td) heat (260 ± 5) °C; no visible damage (10 ± 1) s Solder bath method; SnPb; non-activated flux accelerated ageing 4 h/155 °C (215 ± 3) °C; (3 ± 0.3) s Good tinning ( 95 % covered); 4.17.2 58 (Td) Solderability Solder bath method; no visible damage SnAgCu; non-activated flux accelerated ageing 4 h/155 °C (235 ± 3) °C; (2 ± 0.2) s 4.32 21 (Ue ) Shear (adhesion) 45 N No visible damage 3  (0.1 % R + 0.01 ) 4.33 21 (Ue ) Substrate bending Depth 2 mm, 3 times no visible damage; 1 no open circuit in bent position U = U RMS ins 4.7 - Voltage proof (60 ± 5) s; against ambient, No flashover or breakdown between adjacent resistors Notes (1) The quoted IEC standards are also released as EN standards with the same number and identical contents. (2) Figures are given for arrays with equal values, design type AE. (3) For a single element. HISTORICAL TEMPERATURE COEFFICIENT AND RESISTANCE RANGES DESCRIPTION RESISTANCE VALUE ACCURACY ABSOLUTE TOLERANCE ABSOLUTE TCR TCR TRACKING ACAS 0612 GRADE TOLERANCE MATCHING A ± 25 ppm/K 10 ppm/K ± 0.25 % 0.1 % 47  to 221 k B ± 25 ppm/K 10 ppm/K ± 0.5 % 0.25 % 47  to 221 k E ± 25 ppm/K 15 ppm/K ± 0.25 % 0.1 % 47  to 221 k F ± 25 ppm/K 15 ppm/K ± 0.5 % 0.25 % 47  to 221 k J ± 25 ppm/K 25 ppm/K ± 0.25 % 0.1 % 47  to 221 k K ± 25 ppm/K 25 ppm/K ± 0.5 % 0.25 % 47  to 221 k N ± 50 ppm/K 25 ppm/K ± 0.5 % 0.5 % 47  to 221 k P ± 50 ppm/K 50 ppm/K ± 0.5 % 0.5 % 47  to 221 k Note • Special temperature coefficent and resistance combinations remain available. For optimized availability please refer to the table TEMPERATURE COEFFICENT AND RESISTANCE. Revision: 12-Apr-13 7 Document Number: 28751 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000