CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass RoHS/RoHS II Compliant (exempt per RoHS 2002/95/EC Annex (5)) 6.0x3.5x1.4mm | | | | | | | | || | | | | | Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: APPLICATIONS: (cid:127) Low in height (1.4 mm max.) (cid:127) Computers, Modems, Communication equipment (cid:127) Ceramic package assures high reliability (cid:127) Thin equipment (cid:127) Small size SMD, suitable for high density applications (cid:127) Industrial wide temperature applications (cid:127) Superior heat-resistant glass sealing (cid:127) Wide operating temperature available STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes Fundamental AT- 8.000 39.999999 cut (Standard) 3rd OT AT-cut Frequency Range(*) 40.000 80.000 MHz (Standard) Fundamental AT- 40.000 50.000 cut (See options) Operating Temperature -10 +60 ºC See options Storage Temperature -40 +90 ºC Frequency Tolerance @+25°C -50 +50 ppm See options Frequency Stability over the Operating -50 +50 ppm See options Temperature ( ref. to +25°C) Equivalent series resistance See table 1 below Ω Shunt capacitance (C0) 7 pF Load capacitance (CL) 18 pF See options Drive Level 10 100 µW Aging@25°C±3°C ±5 ppm First year Insulation Resistance 500 MΩ @ 100Vdc (*) Frequency above 40MHz based on availability. Please contact ABRACON Table 1 Frequency (MHz) ESR(Ω) max. Operation Mode 8.000 – 9.999 100 Fundamental 10.000 – 11.999 80 Fundamental 12.000 – 15.999 60 Fundamental 16.000 – 50.000 50 Fundamental 40.000 – 80.000 70 3rd Overtone 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 AABBRRAACCOONN IISS ISO9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 CCEERRCTTEIIFFRIIEETDDIF IED LLC Visit www.abracon.com for Terms and Conditions of Sale

CERAMIC SMD MICRO MINIATURE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass RoHS/RoHS II Compliant (exempt per RoHS 2002/95/EC Annex (5)) 6.0x3.5x1.4mm | | | | | | | | | | || | | | OPTIONS AND PART IDENTIFICATION: (left blank if standard) ABM7- MHz - - - - - - - Packaging Frequency in MHz Blank: Bulk e.g. 14.31818MHz T: 1kpcs/reel 14.31818MHz T2: 250pcs/reel 26.000MHz Load Capacitance (pF) Please specify CL in pF or Mode S for series (8 to 33pF) F: Fund AT for Please contact ABRACON for >40MHz other values Custom ESR if other Operating Temp. Freq. Tolerance Freq. Stability than standard E: 0°C ~ +70°C 1: ± 10 ppm U: ± 10 ppm(*) R□ □: Specify a value in Ω B: -20°C ~ +70°C 7: ± 15 ppm G: ± 15 ppm(**) (e.g.: R40) C: -30°C ~ +70°C 2: ± 20 ppm X: ± 20 ppm N: -30°C ~ +85°C 3: ± 25 ppm W: ± 25 ppm D: -40°C ~ +85°C 4: ± 30 ppm Y: ± 30 ppm J(***): -40°C ~ +105°C H: ± 35 ppm K(***): -40°C ~ +125°C Q: ± 100 ppm L(***):-55°C to +125°C (*) -10°C to 60°C only. (***) ±100 ppm only (**) Contact ABRACON for Please check with Abracon for availability for availability for non-standard -40°C to +85°C frequencies with these operating temperature options. OUTLINE DIMENSION: Dimensions: inches (mm) Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 1. Be advised that this does not affect the electrical characteristics of the crystal in any way. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 AABBRRAACCOONN IISS ISO9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 CCEERRCTTIIEFFRIIEETDDIF IED LLC Visit www.abracon.com for Terms and Conditions of Sale

CERAMIC SMD MICRO MINIATURREE MICROPROCESSOR CRYSTAL ABM7 Pb in Glass RoHS/RoHS II Compliant (exempt per RoHS 2002/95/EC Annex (5)) 6.0x3.5x1.4mm | | | | | | | | | || | | | | REFLOW PROFILE: TAPE & REEL: Packaging: T: 1000pcs/reel Dimensions: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 2 Faraday, Suite# B | Irvine | CA 92618 Revised: 08.06.15 AABBRRAACCOONN IISS ISO9001:2008 Ph. 949.546.8000 | Fax. 949.546.8001 CCEERRCTTEIIFFRIIEETDDIF IED LLC Visit www.abracon.com for Terms and Conditions of Sale