Specifications Standard Document Meets Requirements of: ANSI/ESD S20.20 Packaging Electrical Properties Typical Values Test Procedures/Method Rs Resistance: 1 x 109 to < 1 x 1011 ohms ANSI/ESD STM11.11 Physical Properties Construction: Cellulose film tape coated with a high tack, non-staining, rubber adhesive system on plastic core Thickness: 1.9mil (0.048mm) Color:* Clear, with ESD Symbols Temperature Range: -10°C to +71°C (+14°F -to +160°F) 100°C for 10 min max Antistatic Tape Antistatic Tape Sulfur Content: No Sulfur Backing: Cellulose Imprint on Clear Cellulose Imprint on Clear Cellulose w/ Adhesive: Synthetic Rubber with Symbols Symbols w/Yellow Stripe Tensile: 22 LBS./IN Adhesion: 59oz/in2 RoHS, REACH, and Conflict Minerals Statement Elongation: 22.5% See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: Descoindustries.com/ROHS.aspx See the Desco Limited Warranty: Tape 0.5" 0.75" 1" 2" Core Length Desco.Descoindustries.com/Limited-Warranty.aspx Clear 79200 79201 79202 1" 36 yds See the Desco Disclaimer: 79203 79204 79205 79206 3" 72 yds Desco.Descoindustries.com/Disclaimer.aspx Clear with Symbols No sulfur, surfactants, amines, or silicone based material (adhesive, film backing, 79209 79210 79211 79212 3" 72 yds release material) is used in the manufacture of our cellulose tape. Clear w/ Symbols and Yellow Wescorp Tape Storage and Limited Warranty: Stripe 79275 79276 79277 79278 3" 72 yds The user must determine the suitability for use of an ESD tape for his particular application. For best results, tape inventory should be continually replenished. It Width tolerance ±1/32" is recommended that rolls of tape be stored flat and rotated (flipped over to the other side) periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F (20°C) and be protected from exposure Tape widths are nominal to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat. metric ±0.8 mm (±1/32") Tape over one year old should be evaluated by the user to determine acceptability for *Military organizations sometimes use MIL-STD-1285 for the user’s application. Desco Industries, Inc. recommends those tracking useful life of hardware marking and that document once required the use product to use shipping/invoice date as Desco Industries, Inc. expressly warrants that of the “three arrows in a circle” symbol. That symbol has been 1/4" is 6 mm nominal or 0.236" for a period of one (1) year from the date of purchase, our Wescorp Brand ESDTape changed for consistency with industry marking to the “hand in 1/2" is 12 mm nominal or 0.472" will be free of defects in material (parts) and workmanship (labor). See details of triangle” ESD Susceptibility symbol.“ 3/4" is 18 mm nominal or 0.709" Limited Warranty online at Desco.com/Warranty.aspx (Ref: ESD TR20.20 section 5.3.14.1) 1" is 24 mm nominal or 0.945" *Wescorp is a Desco Industries brand. Specifications and procedures subject to change without notice 2" is 48 mm nominal or 1.890" Note: Tape rolls may vary slightly in color. WESCORP* ESD CELLULOSE TAPE, PLASTIC CORE DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 DRAWING DATE: WEB SITE: Desco.com PHONE (909) 627-8178 NUMBER April DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 79200 2018 WEB SITE: Desco.com PHONE (781) 821-8370 © 2018 DESCO INDUSTRIES INC Employee Owned