9 8 7 6 5 4 3 2 1 B A A 2.00 2.00 1.12 0.08 ± NOTES: ROW A ROW A 1 2 . . . 25 E E CKT 1 CKT 25 1. HOUSING MATERIAL: LCP, GLASS FILLED, UL 94V-0 COLOUR BLACK. 2. TERMINAL MATERIAL: ROW A PHOSPHOR BRONZE 6.48 0.08 2.82 CAVITY ID ± � � 3. SEE APPROPRIATE SHEET FOR CIRCUIT SIZE, (NON CIRCUIT ID) PART NUMBERS AND OVERALL DIMENSIONS. 4.19 2.00 CKT. LOCATION 4. FOR ILLUSTRATION, 6 CKT ASSY SHOWN. 1.83 0.08 ± 5. REFER TO PRODUCT SPEC PS-79107. 8 6. TUBE PACKAGING PER PK-70873-0217 OR ROW B TAPE PACKAGING PER PK-70873-0259 7. SEE FROM SHT 4 FOR PEG OPTION ASSEMBLIES. D RECOMMENDED PCB PAD LAYOUT 8. CKT LOCATIONS ARE NUMBERED FROM LEFT TO D ROW B RIGHT WHEN VIEWING ASSY FROM TOP WITH ROW B 1 2 . . . . 25 CKT 25 THE GATE RECESS ON THE RIGHT AS SHOWN. CKT 1 9. SEE SHT 3, 7 & 9 FOR VOIDED CIRCUIT PART NUMBERS. 10. MEASUREMENT IS TAKEN BETWEEN THE TANGENT OF THE TOE TO TIP OF THE TERMINAL. 1.50CONTACT POINT Z PLATING OPTION: C (4). 30µin (0.75µm) MIN. GOLD PLATE IN SELECTED AREA AND C 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 50µin (1.25µm) MIN. NICKEL OVER-ALL. 4.44 D 0.25 ± (5). 15µin (0.38µm) MIN. GOLD PLATE IN SELECTED AREA AND 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 50µin (1.25µm) MIN. NICKEL OVER-ALL. (6). 5µin (0.13µm) MIN. GOLD PLATE IN SELECTED AREA AND 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 0.15 50µin (1.25µm) MIN. NICKEL OVER-ALL. 0.38 0.46 Z ⌓ B 5.33 A B DETAIL Z-Z SECTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 0 -00..0005 10 9/10/1 9/10/1 9/10/1 GE(UNNELREASLS T SOPLEECRIAFINECDE)S MM NTS 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 0+ 00.0.0070510 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION A N W K' P 79109 SEE TABLE GENERAL MARKET DETAIL BENDING ANGLE OF TAIL EC DR CH AP DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 1 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 WITHOUT PEG OPTION 2.00 HOUSING PLATING OPTION 5 PLATING OPTION 4 PLATING OPTION 6 RECESS 12.00 4.00 1.50+0.10TYP. CKT. ⌀ 0.00 DIM. "A" DIM. "B" DIM. "D" ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. SIZE (PILOT HOLE) TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED E E (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) 04 2.00 4.19 4.65 79109-1001 79109-8401 79109-1051 79109-8451 79109-1101 - 06 4.00 6.19 4.65 79109-1002 79109-8402 79109-1052 79109-8452 79109-1102 - 08 6.00 8.19 4.65 79109-1003 79109-8403 79109-1053 79109-8453 79109-1103 - 10 8.00 10.19 4.65 79109-1004 79109-8404 79109-1054 79109-8454 79109-1104 - 12 10.00 12.19 4.65 79109-1005 79109-8405 79109-1055 79109-8455 79109-1105 - 14 12.00 14.19 4.65 79109-1006 79109-8406 79109-1056 79109-8456 79109-1106 - 16 14.00 16.19 4.65 79109-1007 79109-8407 79109-1057 79109-8457 79109-1107 - 18 16.00 18.19 4.65 79109-1008 79109-8408 79109-1058 79109-8458 79109-1108 - 20 18.00 20.19 4.65 79109-1009 79109-8409 79109-1059 79109-8459 79109-1109 - 22 20.00 22.19 4.65 79109-1010 79109-8410 79109-1060 79109-8460 79109-1110 - 24 22.00 24.19 4.65 79109-1011 79109-8411 79109-1061 79109-8461 79109-1111 - D 26 24.00 26.19 4.65 79109-1012 79109-8412 79109-1062 79109-8462 79109-1112 - D 28 26.00 28.19 4.65 79109-1013 79109-8413 79109-1063 79109-8463 79109-1113 - 30 28.00 30.19 4.65 79109-1014 79109-8414 79109-1064 79109-8464 79109-1114 - 32 30.00 32.19 4.65 79109-1015 79109-8415 79109-1065 79109-8465 79109-1115 - PULL OUT DIRECTION 34 32.00 34.19 4.65 79109-1016 79109-8416 79109-1066 79109-8466 79109-1116 - 36 34.00 36.19 4.65 79109-1017 79109-8417 79109-1067 79109-8467 79109-1117 - 38 36.00 38.19 4.65 79109-1018 79109-8418 79109-1068 79109-8468 79109-1118 - REEL 40 38.00 40.19 4.65 79109-1019 79109-8419 79109-1069 79109-8469 79109-1119 - 42 40.00 42.19 4.65 79109-1020 79109-8420 79109-1070 79109-8470 79109-1120 - TAPE AND REEL ORIENTATION 44 42.00 44.19 4.65 79109-1021 79109-8421 79109-1071 79109-8471 79109-1121 - 46 44.00 46.19 4.65 79109-1022 79109-8422 79109-1072 79109-8472 79109-1122 - C C 48 46.00 48.19 4.65 79109-1023 79109-8423 79109-1073 79109-8473 79109-1123 - 50 48.00 50.19 4.65 79109-1024 79109-8424 79109-1074 79109-8474 79109-1124 - "X" INDICATES TOOLING NOT AVAILABLE. NOTES: SPECIAL PACKAGING (TAPE PACKED WITHOUT CAP) 1. LEADER AND TRAILER TAPE. 160MIN. 390MIN. CKT. PLATING OPTION TOP TAPE TOP TAPE DIM. "A" DIM. "B" DIM. "D" ITEM NO. TRAILER SIZE SEE SHEET 1 B PULL OUT DIRECTION 06 4.00 6.19 4.65 79109-9004 5 B 20 18.00 20.19 4.65 79109-9005 5 COMPONENT 50 48.00 50.19 4.65 79109-9006 5 160MIN. 230MIN. 34 32.00 34.19 4.65 79109-9007 5 TAIL PART LEADER PART (EMPTY) (EMPTY) 2. PEELING OFF FORCE OF THE TOP TAPE: 20-80gf. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 PEEL OFF DIRECTION 10/ 10/ 10/ GE(UNNELREASLS T SOPLEECRIAFINECDE)S MM NTS 9/ 9/ 9/ 15° 201 201 201 MM INCH DRWN BY DATE MAX. PULL OUT DIRECTION 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A 34.. PTAAPCEK A&G RINEGEL S QTAUNADNATIRTDY I=S 5 A0S0 PPECRS /ERIEAE-4L8 1 . - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 2 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 ASSEMBLIES WITHOUT PEGS VOIDED CIRCUIT OPTION E E ASSEMBLY VOID LOCATION(S) CKT. PLATING �WITHOUT CAP IN TUBE� SEE SHEET 1 FOR CONVENTION DIM."A" DIM."B" DIM."D" SIZE OPTION PART NUMBER. ROW CKT. NO.(S) 22 79109-5011 A 2 4 20.00 22.19 4.65 6 79109-5012 A 2 5 4.00 6.19 4.65 D D ASSEMBLY VOID LOCATION(S) CKT. PLATING (WITH CAP IN T&R) SEE SHEET 1 FOR CONVENTION DIM."A" DIM."B" DIM."D" SIZE OPTION PART NUMBER ROW CKT. NO.(S) A 13, 23 50 79109-8924 5 48.00 50.19 4.65 B 23 C C NOTES: 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. B B 2. VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 3 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 PEG OPTION PLATING OPTION: B (4). 30µin (0.75µm) MIN. GOLD PLATE IN SELECTED AREA AND A 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 50µin (1.25µm) MIN. NICKEL OVER-ALL. 2.00 E �5.08� CAVITY ID (5). 15µin (0.38µm) MIN. GOLD PLATE IN SELECTED AREA AND E (NOT CKT ID) 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 50µin (1.25µm) MIN. NICKEL OVER-ALL. (6). 5µin (0.13µm) MIN. GOLD PLATE IN SELECTED AREA AND 75µin (1.88µm) MIN. TIN IN SELECTED AREA OVER 4.19 2.00 4.06 50µin (1.25µm) MIN. NICKEL OVER-ALL. � � NOTES: CONNECTOR WITH CAP 1. HOUSING MATERIAL: GLASS FILLED HIGH TEMP. THERMOPLASTIC. COLOR:BLACK. 2. TERMINAL MATERIAL: PHOSPHOR BRONZE. Y CAP 3. SEE APPROPRIATE SHEET FOR CIRCUIT SIZE, PART NUMBERS AND OVER-ALL DIMENSIONS. D D 4. FOR ILLUSTRATION, 6 & 12 CIRCUIT ASSEMBLY SHOWN. 5. REFER TO PRODUCT SPECIFICATION PS-79107. 6. TUBE PACKAGING PER PK-70873-0217 OR TAPE PACKAGING PER 70873-0259. 4.44 D 7. SEE PSX-79107 FOR SUGGESTED BOTTOM ENTRY 0.38 PIN LENGTHS. 8. 0.89 DIA FOR PRESS FIT ONLY. USE 0.99 0.05 FOR ± ALIGNMENT PURPOSES ON PICK AND PLACE. 9. MEASUREMENT IS TAKEN BETWEEN THE TANGENT OF 0.15 1.45 ⌓ THE TOE TO TIP OF THE TERMINAL. 0.46TYP C Y A C B DETAIL 1.02 1.12 0.08 ± C 5.33 C Y-Y SECTION ⌀1.12±0.05 1.00 0.13 3.24 0.08 ⌖ Ⓜ ± 2.00 TYP NON-PLATED 0.00 0 9 0.89 0.05 8 -0.05 1.12 0.08 ⌀ ± ± 0.15 Y ⌖ Ⓛ B B 2.00 2.54 8 ⌀0.89±0.05 +0.075 -X- DETAIL B 0 0.000 9 2.00 5.08 RECOMMENDED PCB LAYOUT BENDING ANGLE OF TAIL (BOTTOM ENTRY) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 1.40 0.08 -Y- C 20 20 20 MM INCH DRWN BY DATE ± ⌖ 0.15Ⓛ X 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A RECOMMENDED PCB LAYOUT - 625618 ABABUPS MRAMAKRISH MRAMAKRISH 210 PPPLLLAAACCCEEESSS ±±± 00..2358 ±±± AMLPBPJRLM BEYE DATE 12908194//0058//1051 SERIES MA TPERRIAOL NDUUMBCERT CUSTOMER CDUSRTOAMWERING A O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 4 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 PEG OPTION PLATING OPTION 5 PLATING OPTION 4 PLATING OPTION 6 E E CKT. DIM. "A" DIM. "B" DIM. "C" DIM. "D" ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. SIZE TUBE PACKED TAPE PACKED TUBE PACKED TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED (WITHOUT CAP) (WITH CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) 04 2.00 4.19 - 4.65 79109-1201 79109-8601 79109-1225 79109-1251 79109-8651 79109-1301 - 06 4.00 6.19 2.00 4.65 79109-1202 79109-8602 79109-1226 79109-1252 79109-8652 79109-1302 - 08 6.00 8.19 4.00 4.65 79109-1203 79109-8603 79109-1227 79109-1253 79109-8653 79109-1303 - 10 8.00 10.19 6.00 4.65 79109-1204 79109-8604 79109-1228 79109-1254 79109-8654 79109-1304 - 12 10.00 12.19 8.00 4.65 79109-1205 79109-8605 79109-1229 79109-1255 79109-8655 79109-1305 - 14 12.00 14.19 10.00 4.65 79109-1206 79109-8606 79109-1230 79109-1256 79109-8656 79109-1306 - 16 14.00 16.19 12.00 4.65 79109-1207 79109-8607 79109-1231 79109-1257 79109-8657 79109-1307 - 18 16.00 18.19 14.00 4.65 79109-1208 79109-8608 79109-1232 79109-1258 79109-8658 79109-1308 - 20 18.00 20.19 16.00 4.65 79109-1209 79109-8609 79109-1233 79109-1259 79109-8659 79109-1309 - D 22 20.00 22.19 18.00 4.65 79109-1210 79109-8610 79109-1234 79109-1260 79109-8660 79109-1310 - D 24 22.00 24.19 20.00 4.65 79109-1211 79109-8611 79109-1235 79109-1261 79109-8661 79109-1311 - 26 24.00 26.19 22.00 4.65 79109-1212 79109-8612 79109-1236 79109-1262 79109-8662 79109-1312 - 28 26.00 28.19 24.00 4.65 79109-1213 79109-8613 79109-1237 79109-1263 79109-8663 79109-1313 - 30 28.00 30.19 26.00 4.65 79109-1214 79109-8614 79109-1238 79109-1264 79109-8664 79109-1314 - 32 30.00 32.19 28.00 4.65 79109-1215 79109-8615 79109-1239 79109-1265 79109-8665 79109-1315 - 34 32.00 34.19 30.00 4.65 79109-1216 79109-8616 79109-1240 79109-1266 79109-8666 79109-1316 - 36 34.00 36.19 32.00 4.65 79109-1217 79109-8617 79109-1241 79109-1267 79109-8667 79109-1317 - 38 36.00 38.19 34.00 4.65 79109-1218 79109-8618 79109-1242 79109-1268 79109-8668 79109-1318 - 40 38.00 40.19 36.00 4.65 79109-1219 79109-8619 79109-1243 79109-1269 79109-8669 79109-1319 - C 42 40.00 42.19 38.00 4.65 79109-1220 79109-8620 79109-1244 79109-1270 79109-8670 79109-1320 - C 44 42.00 44.19 40.00 4.65 79109-1221 79109-8621 79109-1245 79109-1271 79109-8671 79109-1321 - 46 44.00 46.19 42.00 4.65 79109-1222 79109-8622 79109-1246 79109-1272 79109-8672 79109-1322 - 48 46.00 48.19 44.00 4.65 79109-1223 79109-8623 79109-1247 79109-1273 79109-8673 79109-1323 - 50 48.00 50.19 46.00 4.65 79109-1224 79109-8624 79109-1248 79109-1274 79109-8674 79109-1324 - 'X' INDICATES TOOLING NOT AVAILABLE B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 5 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 E E PEG OPTION SPECIAL PACKAGING (TAPE PACKED WITHOUT CAP ) D D PLATING CKT. DIM. "A" DIM. "B" DIM. "C" DIM. "D" ITEM NO. OPTION SIZE SEE SHEET 1 50 48.00 50.19 46.00 4.65 79109-9103 5 C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 6 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 E E ASSEMBLIES WITH PEGS VOIDED CIRCUIT OPTION ASSEMBLY VOID LOCATION(S) CKT. �WITHOUT CAP IN TUBE� SEE SHEET 1 FOR CONVENTION PLATING DIM."A" DIM."B" DIM."C" DIM."D" D SIZE OPTION D ITEM NO. ROW CKT. NO.(S) 48 79109-6011 ROW A 1, 24 5 46.00 48.19 44.00 4.65 44 79109-6012 ROW B 10 5 42.00 44.19 42.00 4.65 C C NOTES: 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. 2. VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 7 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 SPECIAL - CUSTOM TERMINAL FEET PEG OPTION E E PLATING OPTION 5 CKT. DIM. "A" DIM. "B" DIM. "C" DIM. "D" ITEM NO. ITEM NO. ITEM NO. SIZE TUBE PACKED TAPE PACKED TUBE PACKED (WITHOUT CAP) (WITH CAP) (WITH CAP) 04 2.00 4.19 - 4.70 X X 79109-8751 X 06 4.00 6.19 2.00 4.70 X X 79109-8752 X 08 6.00 8.19 4.00 4.70 X X 79109-8753 X 10 8.00 10.19 6.00 4.70 X X 79109-8754 X 12 10.00 12.19 8.00 4.70 X X 79109-8755 X 14 12.00 14.19 10.00 4.70 X X 79109-8756 X 16 14.00 16.19 12.00 4.70 X X 79109-8757 X D D 18 16.00 18.19 14.00 4.70 X X 79109-8758 X 20 18.00 20.19 16.00 4.70 X X 79109-8759 X 22 20.00 22.19 18.00 4.70 X X 79109-8760 X 24 22.00 24.19 20.00 4.70 X X 79109-8761 X 26 24.00 26.19 22.00 4.70 X X 79109-8762 X 28 26.00 28.19 24.00 4.70 X X 79109-8763 X 30 28.00 30.19 26.00 4.70 79109-7010 79109-8764 X 79109-7065 32 30.00 32.19 28.00 4.70 X X 79109-8765 X 34 32.00 34.19 30.00 4.70 X X 79109-8766 X 36 34.00 36.19 32.00 4.70 X X 79109-8767 X C 38 36.00 38.19 34.00 4.70 X X 79109-8768 X C 40 38.00 40.19 36.00 4.70 X X 79109-8769 X 42 40.00 42.19 38.00 4.70 X X N.A. X 44 42.00 44.19 40.00 4.70 79109-7016 X N.A. X 46 44.00 46.19 42.00 4.70 X X N.A. X 48 46.00 48.19 44.00 4.70 X X N.A. X 50 48.00 50.19 46.00 4.70 79109-7015 X N.A. X B B 'X' INDICATES TOOLING NOT AVAILABLE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 8 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

9 8 7 6 5 4 3 2 1 E E SPECIAL - CUSTOM TERMINAL FEET VOIDED CURCUIT OPTION VOID LOCATION(S) D ASSEMBLY D SEE SHEET 1 FOR CONVENTION CKT. PLATING PEG ITEM NO. ITEM NO. DIM."A" DIM."B" DIM."C" DIM."D" SIZE OPTION OPTION TUBE PACKED TAPE PACKED ROW CKT. NO.(S) (WITHOUT CAP) (WITH CAP) 48 79109-7011 X 79109-8385 ROW A 1, 24 5 46.00 48.19 44.00 4.70 YES 42 79109-7012 X 79109-8386 ROW A 1, 21 5 40.00 42.19 38.00 4.70 YES 20 79109-7013 X 79109-8387 ROW A 1, 10 5 18.00 20.19 16.00 4.70 YES C C 50 79109-7014 X 79109-8388 ROW B 13 5 48.00 50.19 46.00 4.70 YES 50 79109-7017 X 79109-8988 ROW B 13 5 48.00 50.19 46.00 4.70 NO 'X' INDICATES TOOLING NOT AVAILABLE. B NOTES: B 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. 2. VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 5 5 DIMENSION UNITS SCALE 1 1 1 0/ 0/ 0/ GENERAL TOLERANCES 1 1 1 (UNLESS SPECIFIED) MM NTS 9/ 9/ 9/ 1 1 1 20 20 20 MM INCH DRWN BY DATE 4 PLACES ± ± AAB 1989/05/15 2MM DUAL ROW A A N N 3 PLACES ± ± CHK'D BY DATE VERTICAL RECEPTACLE, SMT A - 18 BUPS MAKRISH MAKRISH 21 PPLLAACCEESS ±± 00..2358 ±± AMPPJRM BY DATE 1989/05/15 PRODUCT CUSTOMER DRAWING A 6256 ABA MRA MRA 0 PLACES ± ± LBLEE 2014/08/01 SERIES MATERIAL NUMBER CUSTOMER O: N: D: R: ANGULAR TOL ± 3.0 DRAWING SIZE THIRD ANGLE PROJECTION N W K' P 79109 SEE TABLE GENERAL MARKET C R H P E D C A DRAFT WHERE APPLICABLE A3 MUST REMAIN DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER RELEASE STATUS RELEASE DATE N5 REV WITHIN DIMENSIONS SDA-79109-XXXX PSD 001 9 OF 10 FORMAT: Met-lega-master-tb-prod-A39 8 7 6 5 4 3 2 1 REVISION: C DATE: 2016/02/04

10 9 8 7 6 5 4 3 2 1 BOARD TO BOARD (BTB) DISTANCE F F RECEPTACLE MATES WITH(HEADER) BTB DISTANCE PICTORIAL VIEW 7.15 � � 87831 7.15 E E 8.35 � � 87832 8.35 D D 79109 7.15 � � 151117 7.15 C C 8.35 151118 8.35 � � B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH EC NO: 625618 2MM DUAL ROW 4 PLACES ± ± DRWN: ABABUPS 2019/10/14 VERTICAL RECEPTACLE, SMT 3 PLACES ± ± CHK'D: MRAMAKRISHNA 2019/10/15 A 2 PLACES ± 0.25 ± APPR: MRAMAKRISHNA 2019/10/15 PRODUCT CUSTOMER DRAWING A 1 PLACE ± 0.38 ± INITIAL REVISION: DOCUMENT NUMBER DOC TYPEDOC PARTREVISION 0 PLACES ± ± DRWN: DRWN BY XXXX/XX/XX SDA-79109-XXXX PSD 001 N5 ANGULAR TOL ± 3.0 ° APPR: APPR BY XXXX/XX/XX DRAFT WHERE APPLICABLE THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER DOCUMENT STATUS P1 RELEASE DATE 2019/10/15 13:45:25 WITMHUINS TD IRMEEMNASIINONS A3-SIZE 79109 GENERAL MARKET 10 OF 10 FORMAT: Met-1lega-0master-tb-prod-A3 9 8 7 6 5 4 3 2 1 REVISION: D DATE: 2018/01/18