74HC04; 74HCT04 Hex inverter Rev. 6 — 9 June 2020 Product Data sheet 1. General description The 74HC04; 74HCT04 is a hex inverter. The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of V . CC 2. Features and benefits • Wide supply voltage range from 2.0 V to 6.0 V • CMOS low power dissipation • High noise immunity • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • Complies with JEDEC standards: • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.0 V) • Input levels: • For 74HC04: CMOS level • For 74HCT04: TTL level • ESD protection: • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-A exceeds 200 V • Multiple package options • Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC04D -40 °C to +125 °C SO14 plastic small outline package; 14 leads; SOT108-1 body width 3.9 mm 74HCT04D 74HC04DB -40 °C to +125 °C SSOP14 plastic shrink small outline package; 14 leads; SOT337-1 body width 5.3 mm 74HCT04DB 74HC04PW -40 °C to +125 °C TSSOP14 plastic thin shrink small outline package; SOT402-1 14 leads; body width 4.4 mm 74HCT04PW 74HC04BQ -40 °C to +125 °C DHVQFN14 plastic dual in-line compatible thermal SOT762-1 enhanced very thin quad flat package; 74HCT04BQ no leads; 14 terminals; body 2.5 × 3 × 0.85 mm

Nexperia 74HC04; 74HCT04 Hex inverter 4. Functional diagram 1 1 2 1 1A 1Y 2 1 3 4 3 2A 2Y 4 1 5 6 5 3A 3Y 6 1 9 8 9 4A 4Y 8 1 11 5A 5Y 10 11 10 13 6A 6Y 12 1 13 12 A Y mna342 mna343 mna341 Fig. 1. Logic symbol Fig. 2. IEC logic symbol Fig. 3. Logic diagram (one inverter) 5. Pinning information 5.1. Pinning 74HC04 74HCT04 C terminal 1 A C 1 V index area 1 14 1Y 2 13 6A 2A 3 12 6Y 74HC04 74HCT04 2Y 4 11 5A 3A 5 GND(1) 10 5Y 1A 1 14 VCC 3Y 6 9 4A 1Y 2 13 6A 7 8 2A 3 12 6Y D Y 2Y 4 11 5A GN 4 001aac442 3A 5 10 5Y Transparent top view 3Y 6 9 4A (1) This is not a ground pin. There is no electrical or GND 7 8 4Y mechanical requirement to solder the pad. In case 001aac441 soldered, the solder land should remain floating or connected to GND. Fig. 4. Pin configuration SOT108-1 (SO14), SOT337-1 (SSOP14) and SOT402-1 (TSSOP14) Fig. 5. Pin configuration SOT762-1 (DHVQFN14) 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 2 / 14

Nexperia 74HC04; 74HCT04 Hex inverter 5.2. Pin description Table 2. Pin description Symbol Pin Description 1A, 2A, 3A, 4A, 5A, 6A 1, 3, 5, 9, 11, 13 data input 1Y, 2Y, 3Y, 4Y, 5Y, 6Y 2, 4, 6, 8, 10, 12 data output GND 7 ground (0 V) V 14 supply voltage CC 6. Functional description Table 3. Function table H = HIGH voltage level; L = LOW voltage level Input Output nA nY L H H L 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +7 V CC I input clamping current V < -0.5 V or V > V + 0.5 V [1] - ±20 mA IK I I CC I output clamping current V < -0.5 V or V > V + 0.5 V [1] - ±20 mA OK O O CC I output current -0.5 V < V < V + 0.5 V - ±25 mA O O CC I supply current - 50 mA CC I ground current -50 - mA GND T storage temperature -65 +150 °C stg P total power dissipation [2] - 500 mW tot [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SOT108-1 (SO14) package: Ptot derates linearly with 10.1 mW/K above 100 °C. For SOT337-1 (SSOP14) package: Ptot derates linearly with 7.3 mW/K above 81 °C. For SOT402-1 (TSSOP14) package: Ptot derates linearly with 7.3 mW/K above 81 °C. For SOT762-1 (DHVQFN14) package: Ptot derates linearly with 9.6 mW/K above 98 °C. 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 3 / 14

Nexperia 74HC04; 74HCT04 Hex inverter 8. Recommended operating conditions Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V) Symbol Parameter Conditions 74HC04 74HCT04 Unit Min Typ Max Min Typ Max V supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V CC V input voltage 0 - V 0 - V V I CC CC V output voltage 0 - V 0 - V V O CC CC T ambient temperature -40 +25 +125 -40 +25 +125 °C amb Δt/ΔV input transition rise and fall rate V = 2.0 V - - 625 - - - ns/V CC V = 4.5 V - 1.67 139 - 1.67 139 ns/V CC V = 6.0 V - - 83 - - - ns/V CC 9. Static characteristics Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HC04 V HIGH-level V = 2.0 V 1.5 1.2 - 1.5 - 1.5 - V IH CC input voltage V = 4.5 V 3.15 2.4 - 3.15 - 3.15 - V CC V = 6.0 V 4.2 3.2 - 4.2 - 4.2 - V CC V LOW-level V = 2.0 V - 0.8 0.5 - 0.5 - 0.5 V IL CC input voltage V = 4.5 V - 2.1 1.35 - 1.35 - 1.35 V CC V = 6.0 V - 2.8 1.8 - 1.8 - 1.8 V CC V HIGH-level V = V or V OH I IH IL output voltage I = -20 μA; V = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V O CC I = -20 μA; V = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V O CC I = -20 μA; V = 6.0 V 5.9 6.0 - 5.9 - 5.9 - V O CC I = -4.0 mA; V = 4.5 V 3.98 4.32 - 3.84 - 3.7 - V O CC I = -5.2 mA; V = 6.0 V 5.48 5.81 - 5.34 - 5.2 - V O CC V LOW-level V = V or V OL I IH IL output voltage I = 20 μA; V = 2.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 20 μA; V = 4.5 V - 0 0.1 - 0.1 - 0.1 V O CC I = 20 μA; V = 6.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 4.0 mA; V = 4.5 V - 0.15 0.26 - 0.33 - 0.4 V O CC I = 5.2 mA; V = 6.0 V - 0.16 0.26 - 0.33 - 0.4 V O CC I input leakage V = V or GND; V = 6.0 V - - ±0.1 - ±1 - ±1 μA I I CC CC current I supply current V = V or GND; I = 0 A; - - 2 - 20 - 40 μA CC I CC O V = 6.0 V CC C input - 3.5 - - - - - pF I capacitance 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 4 / 14

Nexperia 74HC04; 74HCT04 Hex inverter Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74HCT04 V HIGH-level V = 4.5 V to 5.5 V 2.0 1.6 - 2.0 - 2.0 - V IH CC input voltage V LOW-level V = 4.5 V to 5.5 V - 1.2 0.8 - 0.8 - 0.8 V IL CC input voltage V HIGH-level V = V or V ; V = 4.5 V OH I IH IL CC output voltage I = -20 μA 4.4 4.5 - 4.4 - 4.4 - V O I = -4.0 mA 3.84 4.32 - 3.84 - 3.7 - V O V LOW-level V = V or V ; V = 4.5 V OL I IH IL CC output voltage I = 20 μA - 0 0.1 - 0.1 - 0.1 V O I = 5.2 mA - 0.15 0.26 - 0.33 - 0.4 V O I input leakage V = V or GND; V = 5.5 V - - ±0.1 - ±1 - ±1 μA I I CC CC current I supply current V = V or GND; I = 0 A; - - 2 - 20 - 40 μA CC I CC O V = 5.5 V CC ΔI additional per input pin;V = V - 2.1 V; - 120 432 - 540 - 590 μA CC I CC supply current I = 0 A; other inputs at V O CC or GND; V = 4.5 V to 5.5 V CC C input - 3.5 - - - - - pF I capacitance 10. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; C = 50 pF; for test circuit see Fig. 7. L Symbol Parameter Conditions 25 °C -40 °C to +125 °C Unit Min Typ Max Max Max (85 °C) (125 °C) 74HC04 t propagation delay nA to nY; see Fig. 6 [1] pd V = 2.0 V - 25 85 105 130 ns CC V = 4.5 V - 9 17 21 26 ns CC V = 5.0 V; C = 15 pF - 7 - - - ns CC L V = 6.0 V - 7 14 18 22 ns CC t transition time see Fig. 6 [2] t V = 2.0 V - 19 75 95 110 ns CC V = 4.5 V - 7 15 19 22 ns CC V = 6.0 V - 6 13 16 19 ns CC C power dissipation per package; V = GND to V [3] - 21 - - - pF PD I CC capacitance 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 5 / 14

Nexperia 74HC04; 74HCT04 Hex inverter Symbol Parameter Conditions 25 °C -40 °C to +125 °C Unit Min Typ Max Max Max (85 °C) (125 °C) 74HCT04 t propagation delay nA to nY; see Fig. 6 [1] pd V = 4.5 V - 10 19 24 29 ns CC V = 5.0 V; C = 15 pF - 8 - - - ns CC L t transition time V = 4.5 V; see Fig. 6 [2] - 7 15 19 22 ns t CC C power dissipation per package; [3] - 24 - - - pF PD capacitance V = GND to V - 1.5 V I CC [1] tpd is the same as tPHL and tPLH. [2] tt is the same as tTHL and tTLH. [3] CPD is used to determine the dynamic power dissipation (PD in μW): PD = CPD x VCC2 x fi x N + ∑(CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; ∑(CL x VCC2 x fo) = sum of outputs. 10.1. Waveforms VI nA input VM VM GND tPHL tPLH VOH 90 % nY output VM VM 10 % VOL tTHL tTLH mna722 Measurement points are given in Table 8. V and V are typical voltage output levels that occur with the output load. OL OH Fig. 6. The input (nA) to output (nY) propagation delay times Table 8. Measurement points Type Input Output V V M M 74HC04 0.5V 0.5V CC CC 74HCT04 1.3 V 1.3 V 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 6 / 14

Nexperia 74HC04; 74HCT04 Hex inverter VI tW 90 % negative pulse VM VM 10 % GND tf tr tr tf VI 90 % positive pulse VM VM 10 % GND tW VCC VI VO G DUT RT CL 001aah768 Test data is given in Table 9. Definitions test circuit: R = termination resistance should be equal to output impedance Z of the pulse generator. T o C = load capacitance including jig and probe capacitance. L Fig. 7. Test circuit for measuring switching times Table 9. Test data Type Input Load Test V t, t C I r f L 74HC04 V 6.0 ns 15 pF, 50 pF t , t CC PLH PHL 74HCT04 3.0 V 6.0 ns 15 pF, 50 pF t , t PLH PHL 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 7 / 14

Nexperia 74HC04; 74HCT04 Hex inverter 11. Package outline SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y H E v M A Z 14 8 Q A 2 A 1 (A 3 ) A pin 1 index θ L p 1 7 L e w M detail X b p 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (1) e H E L L p Q v w y Z (1) θ 0.25 1.45 0.49 0.25 8.75 4.0 6.2 1.0 0.7 0.7 mm 1.75 0.25 1.27 1.05 0.25 0.25 0.1 0.10 1.25 0.36 0.19 8.55 3.8 5.8 0.4 0.6 0.3 8 o 0.010 0.057 0.019 0.0100 0.35 0.16 0.244 0.039 0.028 0.028 0 o inches 0.069 0.01 0.05 0.041 0.01 0.01 0.004 0.004 0.049 0.014 0.0075 0.34 0.15 0.228 0.016 0.024 0.012 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT108-1 076E06 MS-012 03-02-19 Fig. 8. Package outline SOT108-1 (SO14) 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 8 / 14

Nexperia 74HC04; 74HCT04 Hex inverter SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1 D E A X c y H E v M A Z 14 8 Q A 2 A 1 (A 3 ) A pin 1 index θ L p L 1 7 detail X w M e b p 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (1) e H E L L p Q v w y Z (1) θ 0.21 1.80 0.38 0.20 6.4 5.4 7.9 1.03 0.9 1.4 8 o mm 2 0.05 1.65 0.25 0.25 0.09 6.0 5.2 0.65 7.6 1.25 0.63 0.7 0.2 0.13 0.1 0.9 0 o Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT337-1 MO-150 03-02-19 Fig. 9. Package outline SOT337-1 (SSOP14) 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 9 / 14

Nexperia 74HC04; 74HCT04 Hex inverter TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 D E A X c y H E v M A Z 14 8 Q A 2 (A 3 ) A pin 1 index A 1 θ L p L 1 7 detail X w M e b p 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax . A 1 A 2 A 3 b p c D (1) E (2) e H E L L p Q v w y Z (1) θ 0.15 0.95 0.30 0.2 5.1 4.5 6.6 0.75 0.4 0.72 8 o mm 1.1 0.05 0.80 0.25 0.19 0.1 4.9 4.3 0.65 6.2 1 0.50 0.3 0.2 0.13 0.1 0.38 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 99-12-27 SOT402-1 MO-153 03-02-18 Fig. 10. Package outline SOT402-1 (TSSOP14) 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 10 / 14

Nexperia 74HC04; 74HCT04 Hex inverter DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm SOT762-1 D B A A A1 E c terminal 1 detail X index area terminal 1 C e1 index area e b v C A B y1C y w C 2 6 L 1 7 Eh e 14 8 k 13 9 Dh X k 0 2 4 mm scale Dimensions (mm are the original dimensions) Unit A(1) A1 b c D(1) Dh E(1) Eh e e1 k L v w y y1 max 1 0.05 0.30 3.1 1.65 2.6 1.15 0.5 mm nom 0.02 0.25 0.2 3.0 1.50 2.5 1.00 0.5 2 0.4 0.1 0.05 0.05 0.1 min 0.00 0.18 2.9 1.35 2.4 0.85 0.2 0.3 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. sot762-1_po Outline References European Issue date version IEC JEDEC JEITA projection 15-04-10 SOT762-1 MO-241 15-05-05 Fig. 11. Package outline SOT762-1 (DHVQFN14) 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 11 / 14

Nexperia 74HC04; 74HCT04 Hex inverter 12. Abbreviations Table 10. Abbreviations Acronym Description CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 13. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes 74HC_HCT04 v.6 20200609 Product data sheet - 74HC_HCT04 v.5 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Section 2 updated. • Table 4: Derating values for P total power dissipation have been updated. tot 74HC_HCT04 v.5 20151127 Product data sheet - 74HC_HCT04 v.4 Modifications: • Type numbers 74HC04N and 74HCT04N (SOT27-1) removed. 74HC_HCT04 v.4 20120803 Product data sheet - 74HC_HCT04 v.3 Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. • Legal texts have been adapted to the new company name where appropriate. 74HC_HCT04 v.3 20030723 Product data sheet - 74HC_HCT04_CNV v.2 74HC_HCT04_CNV v.2 19970826 Product specification - - 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 12 / 14

Nexperia 74HC04; 74HCT04 Hex inverter injury, death or severe property or environmental damage. Nexperia and its 14. Legal information suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the Data sheet status product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Document status Product Definition Applications — Applications that are described herein for any of these [1][2] status [3] products are for illustrative purposes only. Nexperia makes no representation Objective [short] Development This document contains data from or warranty that such applications will be suitable for the specified use data sheet the objective specification for without further testing or modification. product development. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for Preliminary [short] Qualification This document contains data from any assistance with applications or customer product design. It is customer’s data sheet the preliminary specification. sole responsibility to determine whether the Nexperia product is suitable Product [short] Production This document contains the product and fit for the customer’s applications and products planned, as well as data sheet specification. for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. [1] Please consult the most recently issued document before initiating or completing a design. Nexperia does not accept any liability related to any default, damage, costs [2] The term 'short data sheet' is explained in section "Definitions". or problem which is based on any weakness or default in the customer’s [3] The product status of device(s) described in this document may have applications or products, or the application or use by customer’s third party changed since this document was published and may differ in case of customer(s). Customer is responsible for doing all necessary testing for the multiple devices. The latest product status information is available on customer’s applications and products using Nexperia products in order to the internet at https://www.nexperia.com. avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Definitions Limiting values — Stress above one or more limiting values (as defined in Draft — The document is a draft version only. The content is still under the Absolute Maximum Ratings System of IEC 60134) will cause permanent internal review and subject to formal approval, which may result in damage to the device. Limiting values are stress ratings only and (proper) modifications or additions. Nexperia does not give any representations or operation of the device at these or any other conditions above those warranties as to the accuracy or completeness of information included herein given in the Recommended operating conditions section (if present) or the and shall have no liability for the consequences of use of such information. Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect Short data sheet — A short data sheet is an extract from a full data sheet the quality and reliability of the device. with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain Terms and conditions of commercial sale — Nexperia products are detailed and full information. For detailed and full information see the relevant sold subject to the general terms and conditions of commercial sale, as full data sheet, which is available on request via the local Nexperia sales published at http://www.nexperia.com/profile/terms, unless otherwise agreed office. In case of any inconsistency or conflict with the short data sheet, the in a valid written individual agreement. In case an individual agreement is full data sheet shall prevail. concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general Product specification — The information and data provided in a Product terms and conditions with regard to the purchase of Nexperia products by data sheet shall define the specification of the product as agreed between customer. Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be No offer to sell or license — Nothing in this document may be interpreted valid in which the Nexperia product is deemed to offer functions and qualities or construed as an offer to sell products that is open for acceptance or the beyond those described in the Product data sheet. grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein Disclaimers may be subject to export control regulations. Export might require a prior Limited warranty and liability — Information in this document is believed authorization from competent authorities. to be accurate and reliable. However, Nexperia does not give any Non-automotive qualified products — Unless this data sheet expressly representations or warranties, expressed or implied, as to the accuracy states that this specific Nexperia product is automotive qualified, the or completeness of such information and shall have no liability for the product is not suitable for automotive use. It is neither qualified nor tested in consequences of use of such information. Nexperia takes no responsibility accordance with automotive testing or application requirements. Nexperia for the content in this document if provided by an information source outside accepts no liability for inclusion and/or use of non-automotive qualified of Nexperia. products in automotive equipment or applications. In no event shall Nexperia be liable for any indirect, incidental, punitive, In the event that customer uses the product for design-in and use in special or consequential damages (including - without limitation - lost automotive applications to automotive specifications and standards, profits, lost savings, business interruption, costs related to the removal customer (a) shall use the product without Nexperia’s warranty of the or replacement of any products or rework charges) whether or not such product for such automotive applications, use and specifications, and (b) damages are based on tort (including negligence), warranty, breach of whenever customer uses the product for automotive applications beyond contract or any other legal theory. Nexperia’s specifications such use shall be solely at customer’s own risk, Notwithstanding any damages that customer might incur for any reason and (c) customer fully indemnifies Nexperia for any liability, damages or failed whatsoever, Nexperia’s aggregate and cumulative liability towards customer product claims resulting from customer design and use of the product for for the products described herein shall be limited in accordance with the automotive applications beyond Nexperia’s standard warranty and Nexperia’s Terms and conditions of commercial sale of Nexperia. product specifications. Right to make changes — Nexperia reserves the right to make changes Translations — A non-English (translated) version of a document is for to information published in this document, including without limitation reference only. The English version shall prevail in case of any discrepancy specifications and product descriptions, at any time and without notice. This between the translated and English versions. document supersedes and replaces all information supplied prior to the publication hereof. Trademarks Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical Notice: All referenced brands, product names, service names and systems or equipment, nor in applications where failure or malfunction trademarks are the property of their respective owners. of an Nexperia product can reasonably be expected to result in personal 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 13 / 14

Nexperia 74HC04; 74HCT04 Hex inverter Contents 1. General description......................................................1 2. Features and benefits..................................................1 3. Ordering information....................................................1 4. Functional diagram.......................................................2 5. Pinning information......................................................2 5.1. Pinning.........................................................................2 5.2. Pin description.............................................................3 6. Functional description.................................................3 7. Limiting values.............................................................3 8. Recommended operating conditions..........................4 9. Static characteristics....................................................4 10. Dynamic characteristics............................................5 10.1. Waveforms.................................................................6 11. Package outline..........................................................8 12. Abbreviations............................................................12 13. Revision history........................................................12 14. Legal information......................................................13 © Nexperia B.V. 2020. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 9 June 2020 74HC_HCT04 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product Data sheet Rev. 6 — 9 June 2020 14 / 14