74AHC2G08; 74AHCT2G08 Dual 2-input AND gate Rev. 6 — 21 March 2018 Product data sheet 1 General description The 74AHC2G08; 74AHCT2G08 is a high-speed Si-gate CMOS device. The 74AHC2G08; 74AHCT2G08 provides two 2-input AND gates. 2 Features and benefits • Symmetrical output impedance • High noise immunity • ESD protection: • –HBM JESD22-A114E exceeds 2000 V –MM JESD22-A115-A exceeds 200 V –CDM JESD22-C101C exceeds 1000 V • Low power dissipation • Balanced propagation delays • Multiple package options • Specified from -40 °C to +80 °C and from -40 °C to +125 °C 3 Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74AHC2G08DP -40 °C to +125 °C TSSOP8 plastic thin shrink small outline package; 8 leads; SOT505-2 body width 3 mm; lead length 0.5 mm 74AHCT2G08DP 74AHC2G08DC -40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package; 8 leads; SOT765-1 body width 2.3 mm 74AHCT2G08DC

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 4 Marking Table 2. Marking [1] Type number Marking code 74AHC2G08DP A08 74AHCT2G08DP C08 74AHC2G08DC A08 74AHCT2G08DC C08 [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5 Functional diagram 1 & 7 1 1A 2 1Y 7 2 1B 5 2A 5 2Y 3 & 3 6 2B 6 mna724 mna725 Figure 1.  Logic symbol Figure 2.  IEC logic symbol A Y B mna221 Figure 3.  Logic diagram (one gate) 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 2 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 6 Pinning information 6.1 Pinning 74AHC2G08 74AHCT2G08 1A 1 8 VCC 1B 2 7 1Y 2Y 3 6 2B GND 4 5 2A 001aaj389 Figure 4.  Pin configuration SOT505-2 (TSSOP8) and SOT765-1 (VSSOP8) 6.2 Pin description Table 3. Pin description Symbol Pin Description 1A, 2A 1, 5 data input 1B, 2B 2, 6 data input GND 4 ground (0 V) 1Y, 2Y 7, 3 data output V 8 supply voltage CC 7 Functional description Table 4. Function table H = HIGH voltage level; L = LOW voltage level. Input Output nA nB nY L L L L H L H L L H H H 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 3 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 8 Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage -0.5 +7.0 V CC V input voltage -0.5 +7.0 V I [1] I input clamping current V < -0.5 V -20 - mA IK I [1] I output clamping current V < -0.5 V or V > V + 0.5 V - ±20 mA OK O O CC I output current -0.5 V < V < V + 0.5 V - ±25 mA O O CC I supply current - 75 mA CC I ground current -75 - mA GND T storage temperature -65 +150 °C stg [2] P total power dissipation T = -40 °C to +125 °C - 250 mW tot amb [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SOT505-2 package: above 96 °C the value of Ptot derates linearly with 4.6 mW/K. For SOT765-1 package: above 99 °C the value of Ptot derates linearly with 4.9 mW/K. 9 Recommended operating conditions Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 74AHC2G08 74AHCT2G08 Unit Min Typ Max Min Typ Max V supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 V CC V input voltage 0 - 5.5 0 - 5.5 V I V output voltage 0 - V 0 - V V O CC CC T ambient temperature -40 +25 +125 -40 +25 +125 °C amb Δt/ΔV input transition rise V = 3.3 V ± 0.3 V - - 100 - - - ns/V CC and fall rate V = 5.0 V ± 0.5 V - - 20 - - 20 ns/V CC 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 4 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 10 Static characteristics Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74AHC2G08 V HIGH-level V = 2.0 V 1.5 - - 1.5 - 1.5 - V IH CC input voltage V = 3.0 V 2.1 - - 2.1 - 2.1 - V CC V = 5.5 V 3.85 - - 3.85 - 3.85 - V CC V LOW-level V = 2.0 V - - 0.5 - 0.5 - 0.5 V IL CC input voltage V = 3.0 V - - 0.9 - 0.9 - 0.9 V CC V = 5.5 V - - 1.65 - 1.65 - 1.65 V CC V HIGH-level V = V or V OH I IH IL output voltage I = -50 μA; V = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V O CC I = -50 μA; V = 3.0 V 2.9 3.0 - 2.9 - 2.9 - V O CC I = -50 μA; V = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V O CC I = -4.0 mA; V = 3.0 V 2.58 - - 2.48 - 2.40 - V O CC I = -8.0 mA; V = 4.5 V 3.94 - - 3.8 - 3.70 - V O CC V LOW-level V = V or V OL I IH IL output voltage I = 50 μA; V = 2.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 50 μA; V = 3.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 50 μA; V = 4.5 V - 0 0.1 - 0.1 - 0.1 V O CC I = 4.0 mA; V = 3.0 V - - 0.36 - 0.44 - 0.55 V O CC I = 8.0 mA; V = 4.5 V - - 0.36 - 0.44 - 0.55 V O CC I input leakage V = 5.5 V or GND; - - 0.1 - 1.0 - 2.0 μA I I current V = 0 V to 5.5 V CC I supply current V = V or GND; I = 0 A; - - 1.0 - 10 - 40 μA CC I CC O V = 5.5 V CC C input - 1.5 10 - 10 - 10 pF I capacitance 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 5 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74AHCT2G08 V HIGH-level V = 4.5 V to 5.5 V 2.0 - - 2.0 - 2.0 - V IH CC input voltage V LOW-level V = 4.5 V to 5.5 V - - 0.8 - 0.8 - 0.8 V IL CC input voltage V HIGH-level V = V or V ; V = 4.5 V OH I IH IL CC output voltage I = -50 μA 4.4 4.5 - 4.4 - 4.4 - V O I = -8.0 mA 3.94 - - 3.8 - 3.70 - V O V LOW-level V = V or V ; V = 4.5 V OL I IH IL CC output voltage I = 50 μA - 0 0.1 - 0.1 - 0.1 V O I = 8.0 mA - - 0.36 - 0.44 - 0.55 V O I input leakage V = 5.5 V or GND; - - 0.1 - 1.0 - 2.0 μA I I current V = 0 V to 5.5 V CC I supply current V = V or GND; I = 0 A; - - 1.0 - 10 - 40 μA CC I CC O V = 5.5 V CC ΔI additional per input pin; V = 3.4 V; - - 1.35 - 1.5 - 1.5 mA CC I supply current other inputs at V or GND; CC I = 0 A; V = 5.5 V O CC C input - 1.5 10 - 10 - 10 pF I capacitance 11 Dynamic characteristics Table 8. Dynamic characteristics GND = 0 V; for test circuit see Figure 6. Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74AHC2G08 [1] t propagation nA, nB to nY; see Figure 5 pd delay [2] V = 3.0 V to 3.6 V CC C = 15 pF - 4.6 8.8 1.0 10.5 1.0 12.0 ns L C = 50 pF - 6.5 12.3 1.0 14.0 1.0 16.0 ns L [3] V = 4.5 V to 5.5 V CC C = 15 pF - 3.2 5.9 1.0 7.0 1.0 8.0 ns L C = 50 pF - 4.6 7.9 1.0 9.0 1.0 10.5 ns L [4] C power per buffer; C = 50 pF; - 17 - - - - - pF PD L dissipation f = 1 MHz; i capacitance V = GND to V I CC 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 6 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate Symbol Parameter Conditions 25 °C -40 °C to +85 °C -40 °C to +125 °C Unit Min Typ Max Min Max Min Max 74AHCT2G08 [1] t propagation nA, nB to nY; see Figure 5 pd delay [3] V = 4.5 V to 5.5 V CC C = 15 pF - 3.6 6.2 1.0 7.1 1.0 8.0 ns L C = 50 pF - 5.1 7.9 1.0 9.0 1.0 10.5 ns L [4] C power per buffer; C = 50 pF; - 19 - - - - - pF PD L dissipation f = 1 MHz; i capacitance V = GND to V I CC [1] tpd is the same as tPLH and tPHL. [2] Typical values are measured at VCC = 3.3 V. [3] Typical values are measured at VCC = 5.0 V. [4] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD x VCC2 x fi x N + Σ(CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL x VCC2 x fo) = sum of the outputs. 11.1 Waveform and test circuit VI nA,nBinput VM GND tPHL tPLH VOH nYoutput VM VOL mna224 Measurement points are given in Table 9. Logic levels: V and V are typical output voltage levels that occur with the output load. OL OH Figure 5.  The input (nA and nB) to output (nY) propagation delays Table 9. Measurement points Type Input Output V V M M 74AHC2G08 0.5V 0.5V CC CC 74AHCT2G08 1.5 V 0.5V CC 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 7 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate tW VI 90% negative pulse VM VM 10% 0V tf tr tr tf VI 90% positive pulse VM VM 10% 0V tW VCC VCC VI VO RL S1 G DUT open RT CL 001aad983 Test data is given in Table 10. Definitions test circuit: R = Termination resistance should be equal to output impedance Z of the pulse generator. T o C = Load capacitance including jig and probe capacitance. L R = Load resistance. L S1 = Test selection switch. Figure 6.  Test circuit for measuring switching times Table 10. Test data Type Input Load S1 position V t, t C R t , t t , t t , t I r f L L PHL PLH PZH PHZ PZL PLZ 74AHC2G08 V ≤ 3 ns 15 pF, 50 pF 1 kΩ open GND V CC CC 74AHCT2G08 3 V ≤ 3 ns 15 pF, 50 pF 1 kΩ open GND V CC 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 8 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 12 Package outline TSSOP8:plasticthinshrinksmalloutlinepackage;8leads;bodywidth3mm;leadlength0.5mm SOT505-2 D E A X c y HE v M A Z 8 5 A A2 A1 (A3) pin1index θ Lp L 1 4 detailX e w M bp 0 2.5 5mm scale DIMENSIONS(mmaretheoriginaldimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ 0.15 0.95 0.38 0.18 3.1 3.1 4.1 0.47 0.70 8° mm 1.1 0.25 0.65 0.5 0.2 0.13 0.1 0.00 0.75 0.22 0.08 2.9 2.9 3.9 0.33 0.35 0° Note 1.Plasticormetalprotrusionsof0.15mmmaximumpersidearenotincluded. OUTLINE REFERENCES EUROPEAN ISSUEDATE VERSION IEC JEDEC JEITA PROJECTION SOT505-2 --- 02-01-16 Figure 7.  Package outline SOT505-2 (TSSOP8) 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 9 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 D E A X c y HE v A Z 8 5 Q A2 A pin 1 index A1 (A3) θ Lp 1 4 detail X L e w bp 0 5 mm scale Dimensions (mm are the original dimensions) A Unit max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ max 0.15 0.85 0.27 0.23 2.1 2.4 3.2 0.40 0.21 0.4 8° mm nom 1 0.12 0.5 0.4 0.2 0.08 0.1 min 0.00 0.60 0.17 0.08 1.9 2.2 3.0 0.15 0.19 0.1 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. sot765-1_po Outline References European Issue date version IEC JEDEC JEITA projection 07-06-02 SOT765-1 MO-187 16-05-31 Figure 8.  Package outline SOT765-1 (VSSOP8) 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 10 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 13 Abbreviations Table 11. Abbreviations Acronym Description CDM Charged Device Model CMOS Complementary Metal-Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 14 Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes 74AHC_AHCT2G08 v.6 20180321 Product data sheet - 74AHC_AHCT2G08 v.5 Modifications: • The format of this data sheet has been redesigned to comply with the identity guidelines of Nexperia. • Legal texts have been adapted to the new company name where appropriate. • Table 5: total power dissipation derating factors have changed. • Type number 74AHC2G08GD and 74AHCT2G08GD (SOT996-2/XSON8) removed . 74AHC_AHCT2G08 v.5 20131127 Product data sheet - 74AHC_AHCT2G08 v.4 Modifications: • General description updated (errata). 74AHC_AHCT2G08 v.4 20130513 Product data sheet - 74AHC_AHCT2G08 v.3 Modifications: • For type number 74AHC2G08GD and 74AHCT2G08GD XSON8U has changed to XSON8. 74AHC_AHCT2G08 v.3 20090112 Product data sheet - 74AHC_AHCT2G08 v.2 74AHC_AHCT2G08 v.2 20041018 Product data sheet - 74AHC_AHCT2G08 v.1 74AHC_AHCT2G08 v.1 20040206 Product specification - - 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 11 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate 15 Legal information 15.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com. systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal 15.2 Definitions injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in Draft — The document is a draft version only. The content is still under such equipment or applications and therefore such inclusion and/or use is at internal review and subject to formal approval, which may result in the customer’s own risk. modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use Short data sheet — A short data sheet is an extract from a full data sheet without further testing or modification. Customers are responsible for the with the same product type number(s) and title. A short data sheet is design and operation of their applications and products using Nexperia intended for quick reference only and should not be relied upon to contain products, and Nexperia accepts no liability for any assistance with detailed and full information. For detailed and full information see the applications or customer product design. It is customer’s sole responsibility relevant full data sheet, which is available on request via the local Nexperia to determine whether the Nexperia product is suitable and fit for the sales office. In case of any inconsistency or conflict with the short data sheet, customer’s applications and products planned, as well as for the planned the full data sheet shall prevail. application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks Product specification — The information and data provided in a Product associated with their applications and products. Nexperia does not accept data sheet shall define the specification of the product as agreed between any liability related to any default, damage, costs or problem which is based Nexperia and its customer, unless Nexperia and customer have explicitly on any weakness or default in the customer’s applications or products, or agreed otherwise in writing. In no event however, shall an agreement be the application or use by customer’s third party customer(s). Customer is valid in which the Nexperia product is deemed to offer functions and qualities responsible for doing all necessary testing for the customer’s applications beyond those described in the Product data sheet. and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. 15.3 Disclaimers Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent Limited warranty and liability — Information in this document is believed damage to the device. Limiting values are stress ratings only and (proper) to be accurate and reliable. However, Nexperia does not give any operation of the device at these or any other conditions above those representations or warranties, expressed or implied, as to the accuracy given in the Recommended operating conditions section (if present) or the or completeness of such information and shall have no liability for the Characteristics sections of this document is not warranted. Constant or consequences of use of such information. Nexperia takes no responsibility repeated exposure to limiting values will permanently and irreversibly affect for the content in this document if provided by an information source outside the quality and reliability of the device. of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal Terms and conditions of commercial sale — Nexperia products are or replacement of any products or rework charges) whether or not such sold subject to the general terms and conditions of commercial sale, as damages are based on tort (including negligence), warranty, breach of published at http://www.nexperia.com/profile/terms, unless otherwise agreed contract or any other legal theory. Notwithstanding any damages that in a valid written individual agreement. In case an individual agreement is customer might incur for any reason whatsoever, Nexperia's aggregate and concluded only the terms and conditions of the respective agreement shall cumulative liability towards customer for the products described herein shall apply. Nexperia hereby expressly objects to applying the customer’s general be limited in accordance with the Terms and conditions of commercial sale of terms and conditions with regard to the purchase of Nexperia products by Nexperia. customer. Right to make changes — Nexperia reserves the right to make changes No offer to sell or license — Nothing in this document may be interpreted to information published in this document, including without limitation or construed as an offer to sell products that is open for acceptance or specifications and product descriptions, at any time and without notice. This the grant, conveyance or implication of any license under any copyrights, document supersedes and replaces all information supplied prior to the patents or other industrial or intellectual property rights. publication hereof. Export control — This document as well as the item(s) described herein Suitability for use — Nexperia products are not designed, authorized or may be subject to export control regulations. Export might require a prior warranted to be suitable for use in life support, life-critical or safety-critical authorization from competent authorities. 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 12 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate Non-automotive qualified products — Unless this data sheet expressly design and use of the product for automotive applications beyond Nexperia's states that this specific Nexperia product is automotive qualified, the standard warranty and Nexperia's product specifications. product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia Translations — A non-English (translated) version of a document is for accepts no liability for inclusion and/or use of non-automotive qualified reference only. The English version shall prevail in case of any discrepancy products in automotive equipment or applications. In the event that customer between the translated and English versions. uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for 15.4 Trademarks automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia Notice: All referenced brands, product names, service names and for any liability, damages or failed product claims resulting from customer trademarks are the property of their respective owners. 74AHC_AHCT2G08 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved. Product data sheet Rev. 6 — 21 March 2018 13 / 14

Nexperia 74AHC2G08; 74AHCT2G08 Dual 2-input AND gate Contents 1 General description ............................................1 2 Features and benefits .........................................1 3 Ordering information ..........................................1 4 Marking .................................................................2 5 Functional diagram .............................................2 6 Pinning information ............................................3 6.1 Pinning ...............................................................3 6.2 Pin description ...................................................3 7 Functional description ........................................3 8 Limiting values ....................................................4 9 Recommended operating conditions ................4 10 Static characteristics ..........................................5 11 Dynamic characteristics .....................................6 11.1 Waveform and test circuit ..................................7 12 Package outline ...................................................9 13 Abbreviations ....................................................11 14 Revision history ................................................11 15 Legal information ..............................................12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'Legal information'. © Nexperia B.V. 2018. All rights reserved. For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 21 March 2018 Document identifier: 74AHC_AHCT2G08