8 7 6 5 4 3 2 1 VICOR CONFIDENTIAL REV. DESCRIPTION DATE APPROVED THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. 1 RELEASED PER ECO REQUEST E070416 REJH 0 3 / 0 5 / 0 7 EF 2 REVISED PER ECO REQUEST E091085 AR 07/14/09 REJH F F 3 REDRAWN PER E100871 DCS 6/11/10 KUK 4 REVISED PER E120702 ZMB 07/31/12 REJH <> SEE NOTE 6 #30 DRILL THRU <> ( .1285 ) .16 TYP (6) PL. .40 (12) PL. .010 SEE NOTE 5 MATL TO BE REMOVED E E 2.000 2.220 <> D D .190 .11 1.800 <> -A- 3.600 .100 <> .50 4.60 <> .005 C C .410 B B NOTES: 1. MATERIAL: EXTRUSION SEE SHEET 2 OF 2. 2. REMOVE ALL BURRS AND SHARP EDGES. <> 3. CLEAR FINISH, RoHS COMPLIANT PER CST-0001, LATEST REVISION PER A.) CHROMIUM FREE, OR B.) TRIVALENT CHROMIUM DRAWN BY DATE VICOR SWD IN ACCORDANCE WITH MIL-DTL-5541, TYPE II, CLASS 1A OR 3. D.P. KELLY 10/05 SEE CST-0003 FOR TYPES OF AVAILABLE FINISHES. 4. "<>" DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION.' UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] HS CFG 'A' LONG .4H LOW FLOW, 5. DIMENSIONS APPLIES AT SURFACE -A- (12) PL. TOLERANCES ARE: A 6. MACHINED SURFACE TO BE .010 MAX BELOW SURFACE -A- (6) PL. DECIMALS ANGLES THRU HOLE A X.XX [X.X] = ±0.01 [0.25] ±1° 7. DIMENSIONS ARE INCHES ONLY. X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION SIZE CAGE CODE DWG NO REV C 67131 30718 4 SCALE 1:1 SHEET 1 OF 2 DO NOT SCALE DRAWING 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 VICOR CONFIDENTIAL REVISIONS THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HDEISRCELWOISTEHD I SIN N WOHT OTLOE B OER R IENP PRAORDTU TCOE DA,N UYSOENDE OWRIT HOUT REV DESCRIPTION DATE APPROVED THE PERMISSION OF VICOR CORP. SEE SHEET 1 F F E E R.035 (24) PL. SEE DETAIL A A 3.00° R.035 1.5 EACH SIDE OF VERT .410 .235 .200 .110 1.756 D D * .133 (9) PL. * .060 R.010 * .138 (8) PL. (2) PL. R.018 (2) PL. .023 (2) PL. * .058 .036 (2) PL. * .269 .031 +.020 .017 .040 2.220 .080 -.000 (2) PL. R.030 (8) PL. .252 C C * .030 * .060 PROFILE COMMON DETAIL A B B FOR SCALE 8 : 1 NOTES: 30195 1. MATL: ALUMINUM 6063-T5 30718 2. * DENOTES DIMENSION TO THEORETICAL SHARP CORNER. 32188 3. ALL DIMENSIONS ARE CRITICAL CHARACTERISTICS 30482 4. RoHS COMPLIANT PER CST-0001 LATEST REVISION. 5. DIMENSIONS ARE INCHES ONLY DRAWN BY DATE VICOR SWD A. RAGIPANI 07/14/09 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] HS CFG "A" LONG .4H LOW TOLERANCES ARE: A DECIMALS ANGLES FLOW, THRU HOLE, EXTRUSION A X.XX [X.X] = ±0.01 [0.25] ±1° X.XXX [X.XX] = ±0.005 [0.127] THIRD ANGLE PROJECTION SIZE CAGE CODE DWG NO REV C 67131 30718 4 SCALE 1:1 SHEET 2 OF 2 DO NOT SCALE DRAWING 8 7 6 5 4 3 2 1