AMPMODU Interconnection System Mod IV Receptacle Assemblies, Single-Row, Outrigger Design .100 x .100 [2.54 x 2.54] Centerline, End To End Stackable Dual Entry, End Stackable, .125±.010 Low Profile, .100 x .100 [3.17±0.25] Typ. [2.54 x 2.54] Centerline, .200 [5.08] Tine Spacing .020 [0.51] .245 (Standoffs) [6.22] A .148 Point of [3.77] Contact Typ. .107 .200±.003 [2.72] [5.08±0.08] (Localized Gold Typ. Plate Area) Material and Finish Housing — Glass-filled thermoplastic, black, 94V-0 rated .140 .053 Plating A — Duplex .000030 [0.00076] [3.56] .100 [1.34] [2.54] gold on contact area, .000150-0.000300 Typ. Typ. [0.00381-0.00762] matte tin on solder B area all over .000050 [0.00127] nickel Plating B — Duplex .000010 .075-+..000005 [.000.000105205-4.0]0 g0o3l0d0 o [n0 c.0o0n3ta8c1t- a0r.e0a0,762] [1.90-+.00.0103] ReceV m[0a.0tt0e1 t2in7 ]o nni cskoeldler area all over .000050 .200 ptacleertica Plating C — .000150-.000300 [5.08] Asl M [0.00381-0.00762] matte tin on solder .140 seou leads, all over .000050 [0.00127] nickel [3.56] mbnt, .100 lies [2.54] .035±.003 Dia. Typ. [0.89±0.08] 5 Recommended PC Board Hole Layout No. of Dimensions Contact Plating/Part Nos. Pos. A B Plating A Plating B Plating C 3 .300[7.62] .200[5.08] 5-147720-2 5-147726-2 5-147727-2 4 .400[10.16] .300[7.62] 5-147720-3 5-147726-3 5-147727-3 5 .500[12.70] .400[10.16] 5-147720-4 5-147726-4 5-147727-4 6 .600[15.24] .500[12.70] 5-147720-5 5-147726-5 5-147727-5 7 .700[17.78] .600[15.24] 5-147720-6 5-147726-6 5-147727-6 8 .800[20.32] .700[17.78] 5-147720-7 5-147726-7 5-147727-7 9 .900[22.86] .800[20.32] 5-147720-8 5-147726-8 5-147727-8 10 1.000[25.40] .900[22.86] 5-147720-9 5-147726-9 5-147727-9 11 1.100[27.94] 1.000[25.40] 6-147720-0 6-147726-0 6-147727-0 12 1.200[30.48] 1.100[27.94] 6-147720-1 6-147726-1 6-147727-1 13 1.300[33.02] 1.200[30.48] 6-147720-2 6-147726-2 6-147727-2 14 1.400[35.56] 1.300[33.02] 6-147720-3 6-147726-3 6-147727-3 15 1.500[38.10] 1.400[35.56] 6-147720-4 6-147726-4 6-147727-4 16 1.600[40.64] 1.500[38.10] 6-147720-5 6-147726-5 6-147727-5 17 1.700[43.18] 1.600[40.64] 6-147720-6 6-147726-6 6-147727-6 18 1.800[45.72] 1.700[43.18] 6-147720-7 6-147726-7 6-147727-7 19 1.900[48.26] 1.800[45.72] 6-147720-8 6-147726-8 6-147727-8 20 2.000[50.80] 1.900[48.26] 7-147720-8 7-147726-8 7-147727-8 30 3.000[76.20] 2.900[73.66] 8-147720-8 8-147726-8 8-147727-8 40 4.000[101.60] 3.900[99.06] 8-147720-9 8-147726-9 8-147727-9 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to Note:All part numbers are RoHS the maximum point-of-contact dimension and add .062 [1.57] for recommended board thickness if used in compliant. bottom entry application. 181 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Receptacle Assemblies, Double-Row, Outrigger Design, .100 x .100 [2.54 x 2.54] Centerline, End to End Stackable Dual Entry, End Stackable, .020 Low Profile, .100 x .100 [0.51] (Standoffs) [2.54 x 2.54] Centerline, .300 [7.62] Tine Spacing .245 [6.22] Typ. A .148 .050 [3.77] Point of [1.27] Typ. Contact Max. Typ. .107 [2.72] Typ. Material and Finish .100±.003 (Localized Gold [2.54±0.08] Plate Area) Housing — Glass-filled thermoplastic, .198 .300 black, 94V-0 rated [5.03] [7.62] Typ. Contacts — Phosphor bronze, plated as follows: Plating A — Duplex .000030 [0.00076] .125±.010 gold on contact area, .000150-.000300 .100 [3.17±0.25] [0.00381-0.00762] matte tin on solder [2.54] ount,semblies aP[0rle.a0at0 ia0nl2lg 5o B4ve] —rg .o0 l0Dd0 uo0pn5l e0cx o[ n0.0t.a00c00t10 a21r70e]a ,nickel Typ. B [.2T1.y05p04.] Ms ertical ptacle A .m[000a.0t0t0e11 5t2i0n7- ].o0 nn0i 0csko3el0dl0e r[ 0a.r0e0a3 a8ll1 o-0v.e0r0 .706020]050 [.2T1.y05p04.] [.2T1.y05p04.] Vce Plating C — .000150-.000300 e R [0.00381-0.00762] matte tin on solder leads, all over .000050 [0.00127] nickel 5 Related Product Data Mateable Headers — .075+-0.0.0005 Dia. [.21.0504] RGeufiedre t o— th pea Mgea t9in0g Post Selection [.00.3859±±.00.0038]TDyiap.. [1.0.9600+-00..0103]Typ. Typ. Performance Characteristics — Recommended PC Board Hole Layout page 174 No. of Dimensions Contact Plating/Part Nos. Pos. A B Plating A Plating B Plating C 2 .100[2.54] — 6-534267-3 5-147099-1 8-147100-9 Technical Documents — page 276 4 .200[5.08] .100[2.54] 6-534267-7 5-147099-2 9-147100-0 Product Specification 6 .300[7.62] .200[5.08] 6-534267-4 5-147099-3 5-147100-1 108-25022 8 .400[10.16] .300[7.62] 5-534267-5 5-147099-4 5-147100-2 Application Specification 14 .700[17.78] .600[15.24] 5-534267-1 5-147099-7 5-147100-5 114-25018 18 .900[22.86] .800[20.32] 6-534267-0 5-147099-9 5-147100-7 Additional receptacle assembly 20 1.000[25.40] .900[22.86] 5-534267-2 6-147099-0 5-147100-8 sizes are available; minimum 24 1.200[30.48] 1.100[27.94] 5-534267-9 6-147099-2 6-147100-0 order quantities may apply. 30 1.500[38.10] 1.400[35.56] 6-534267-2 6-147099-5 6-147100-3 Consult Tyco Electronics. 36 1.800[45.72] 1.700[43.18] 6-534267-5 6-147099-8 6-147100-6 40 2.000[50.80] 1.900[48.26] 5-534267-7 7-147099-0 6-147100-8 48 2.400[60.96] 2.300[58.42] 6-534267-1 7-147099-4 7-147100-2 Keying Plug 50 2.500[63.50] 2.400[60.96] 6-534267-8 7-147099-5 7-147100-3 60 3.000[76.20] 2.900[73.66] 5-534267-8 8-147099-0 7-147100-8 76 3.800[96.52] 3.700[93.98] 6-534267-6 8-147099-8 8-147100-6 80 4.000[101.60] 3.900[99.06] 5-534267-4 9-147099-0 8-147100-8 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. Part No. 86286-1 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the (Plugs into receptacle contact) maximum point-of-contact dimension and .062 for recommended board thickness if used in bottom entry application. Material — Natural color nylon Note:All part numbers are RoHS compliant. 182 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod. IV Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Closed Dual Entry, Side and .020 [0.51] End Stackable Low Profile, Typ. .100 x .100 [2.54 x 2.54] (Standoffs) Centerline, .150 [3.81] Tine Spacing .245 [6.22] Typ. A .050 [1.27] Max. Typ. .148 .150 Material and Finish .100±.003 [3T.y7p7.] CPooinntta ocft [3T.y8p1.] Housing — Glass-filled thermoplastic, [2.54±0.08] black, 94V-0 rated .198 [5.03] Contacts — Phosphor bronze, plated as follows: .107 Plating A — Duplex .000030 [0.00076] [2.72] .130±.010 gold on contact area, .000150-.000300 Typ. [3.30±0.25] [0.00381-0.00762] matte tin on solder .100 (Localized Gold Typ. [2.54] Plate Area) area all over .000050 [0.00127] nickel R B e Plating B — Duplex .000010 c B eV [.m[0000a..00t0t00e101 5t22i0n57- 4].o0 ]nn0 gi 0csoko3lel0ddl0 eo r[n 0a c.r0oe0an3 taa8lcl1 to- a0vr.ee0ra0 ,.706020]050 [..100.679050++--0.0.00..00100530]TDyiap.. [.2T1.y05p04.*] [.2T1.y05p04.] [.2T1.y05p04.] ptacle Assertical Mo eu Plating C — .000150-.000300 mbnt, [0.00381-0.00762] matte tin on solder lie leads, all over .000050 [0.00127] nickel s .150 Recommended PC Board Hole Layout [.00.3859±±.00.0038] Dia. Typ. [3T.y8p1.] for Bottom Entry or Pass Through Applications 5 Related Product Data *±.003 [±0.08] tolerances not to accumulate Recommended PC Board Hole Layout Mateable Headers — within one connector pattern. for Top Entry Refer to the Mating Post Selection Guide — page 90 No. of Dimensions Contact Plating/Part Nos. Performance Characteristics — Pos. A B Plating A Plating B Plating C page 174 2 .100 [2.54] — 5-535542-1 5-147095-1 5-147096-1 4 .200 [5.08] .100 [2.54] 5-535542-2 5-147095-2 5-147096-2 6 .300 [7.62] .200 [5.08] 5-535542-3 5-147095-3 5-147096-3 Technical Documents — page 276 8 .400[10.16] .300 [7.62] 5-535542-4 5-147095-4 5-147096-4 Product Specification 10 .500[12.70] .400[10.16] 5-535542-5 5-147095-5 5-147096-5 108-25022 12 .600[15.24] .500[12.70] 5-535542-6 5-147095-6 5-147096-6 Application Specification 14 .700[17.78] .600[15.24] 5-535542-7 5-147095-7 5-147096-7 114-25018 16 .800[20.32] .700[17.78] 5-535542-8 5-147095-8 5-147096-8 18 .900[22.86] .800[20.32] 5-535542-9 5-147095-9 5-147096-9 20 1.000[25.40] .900[22.86] 6-535542-0 6-147095-0 6-147096-0 22 1.100[27.94] 1.000[25.40] 6-535542-1 6-147095-1 6-147096-1 24 1.200[30.48] 1.100[27.94] 6-535542-2 6-147095-2 6-147096-2 26 1.300[33.02] 1.200[30.48] 6-535542-3 6-147095-3 6-147096-3 28 1.400[35.56] 1.300[33.02] 6-535542-4 6-147095-4 6-147096-4 30 1.500[38.10] 1.400[35.56] 6-535542-5 6-147095-5 6-147096-5 32 1.600[40.64] 1.500[38.10] 6-535542-6 6-147095-6 6-147096-6 34 1.700[43.18] 1.600[40.64] 6-535542-7 6-147095-7 6-147096-7 36 1.800[45.72] 1.700[43.18] 6-535542-8 6-147095-8 6-147096-8 38 1.900[48.26] 1.800[45.72] 6-535542-9 6-147095-9 6-147096-9 40 2.000[50.80] 1.900[48.26] 7-535542-0 7-147095-0 7-147096-0 Notes: 1.Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to Note:All part numbers are RoHS the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bot- compliant. tom entry application. 183 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod. IV Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) No. of Dimensions Contact Plating/Part Nos. Pos. A B Plating A Plating B Plating C 42 2.100[53.34] 2.000[50.80] 7-535542-1 7-147095-1 7-147096-1 44 2.200[55.88] 2.100[53.34] 7-535542-2 7-147095-2 7-147096-2 46 2.300[58.42] 2.200[55.88] 7-535542-3 7-147095-3 7-147096-3 48 2.400[60.96] 2.300[58.42] 7-535542-4 7-147095-4 7-147096-4 50 2.500[63.50] 2.400[60.96] 7-535542-5 7-147095-5 7-147096-5 52 2.600[66.04] 2.500[63.50] 7-535542-6 7-147095-6 7-147096-6 54 2.700[68.58] 2.600[66.04] 7-535542-7 7-147095-7 7-147096-7 56 2.800[71.12] 2.700[68.58] 7-535542-8 7-147095-8 7-147096-8 58 2.900[73.66] 2.800[71.12] 7-535542-9 7-147095-9 7-147096-9 60 3.000[76.20] 2.900[73.66] 8-535542-0 8-147095-0 8-147096-0 62 3.100[78.74] 3.000[76.20] 8-535542-1 8-147095-1 8-147096-1 64 3.200[81.28] 3.100[78.74] 8-535542-2 8-147095-2 8-147096-2 66 3.300[83.82] 3.200[81.28] 8-535542-3 8-147095-3 8-147096-3 68 3.400[86.36] 3.300[83.82] 8-535542-4 8-147095-4 8-147096-4 70 3.500[88.90] 3.400[86.36] 8-535542-5 8-147095-5 8-147096-5 72 3.600[91.44] 3.500[88.90] 8-535542-6 8-147095-6 8-147096-6 74 3.700[93.98] 3.600[91.44] 8-535542-7 8-147095-7 8-147096-7 76 3.800[96.52] 3.700[93.98] 8-535542-8 8-147095-8 8-147096-8 78 3.900[99.06] 3.800[96.52] 8-535542-9 8-147095-9 8-147096-9 80 4.000[101.60] 3.900[99.06] 9-535542-0 9-147095-0 9-147096-0 s e nt,mbli ue os Ms al e A erticptacl Ve c e R 5 Note:All part numbers are RoHS compliant. 184 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Vertical Receptacle Assemblies, .100 x .100 [2.54 x 2.54] Centerline Product Facts ■ Surface Mount Leads ■ Contact Material: phosphor bronze ■ High temperature, black thermoplastic housings, 94V-0 rated, capable of withstanding IR or vapor- phase reflow ■ Gold/tin duplex plating for reliable mating interconnection and solder interface ■ Metallic hold downs provide retention in the PC board prior to and during the reflow process … and strain relief after soldering ■ Hold downs provide for proper lead-to-pad registration S u ■ Closed-entry receptacle The AMPMODU 0.025 [0.64] AMPMODU surface mount downs are soldered during rfac housings provide lead-in square interconnection vertical receptacle the reflow process and Ase M ramp for positive mating system is an industry assemblies continue to serve as a strain relief for semoun ■ Rdueacle cpatanctillee cvoenr tbaecatsm esm foprloy sletavenld IaIIr da nthda ItV h tahsru p-hroovleided panrodv ibdeen tehfeit sp orof vtheeni rf eatures tmhaet isnogld/uenr mjoaintitnsg d.uring bliest Rec e reliable connections interconnections to almost thru-hole counterparts in the p The design of the hold ta every industry and AMPMODU product family. c ■ Recognized under the downs results in an le marketplace for years. Closed-entry style housing Component Program excellent ratio of As technology advances, design provides a lead-in of Underwriters insertion/extraction forces 5 so has the AMPMODU ramp for positive mating of Laboratories Inc. (into the PC board); 20 lb. R product line. contacts, virtually eliminating File No. E28476 [89 N] maximum insertion the possibility of stubbing. Surface mount vertical force per pair and 10 lb. ■ Certified by The dual-beam receptacle receptacle assemblies are [44.5 N] minimum extraction Canadian Standards contact design, coupled with available to meet your level force per pair (unsoldered). Association, gold plating in the contact R II packaging needs as No tools are required for File No. LR 7189 area, provides a reliable process technologies insertion. interface. Tin plating on the evolve from wave soldering solder tails also enhances to surface mount reflow solderability. (infrared and vapor-phase) processes. AMPMODU The incorporation of surface mount receptacle compliant metallic hold assemblies are offered in downs on receptacle vertical dual entry assemblies offers multiple configurations. These benefits. The hold downs receptacles are available in provide for proper lead-to- single-row and double-row pad registration and provide configurations with a retention to the PC board contact centerline spacing prior to and during of .100 x .100 [2.54 x 2.54]. processing. Used with a plated thru-hole, the hold 185 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Vertical Receptacle Assemblies, .100 x .100 [2.54 x 2.54] Centerline (Continued) Performance Specifications Voltage Rating:250 VAC Current Rating:3.0 amperes (max.) for single contact; 2.0 amperes (max.) per contact when connector is fully energized Operating Temperature Range (Receptacle Assemblies):–65°C to +125°C Operating Temperature Range (Headers):-65°C to +105°C Dielectric Withstanding Voltage:750 VAC Termination Resistance:12 milliohms (max.) Insulation Resistance:5000 megohms (min.) Mating Force (Receptacle Assemblies):9.0 oz. [2.50N] (max.) per contact Unmating Force (Receptacle Assemblies):1.5 oz. [0.42N] (min.) per contact Durability:Tested to 200 cycles (min.) for .000030 [0.00076] gold plated contacts e cl a pt e cs ee nt Rmbli Mousse e A c a urf S 5 186 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] Centerline with Compliant Pin Hold Downs SDuurafla Ecen tMryo wuintth, CSoinmgpleli-aRnotw, [.00.3987] ..003205T y[p00...7664] [.00.2501]STytapn.doffs Pin Holddowns .265 [6.73] Typ. D .107 (Localized Gold [2.72] Plate Area) C Material and Finish Housing— Glass-filled thermoplastic, [.31.4506] [.52.0288]Max. (Depressed) black, 94V-0 rated Contacts— Phosphor bronze, plated .100 as follows: [2.54]Typ. .148 Point of Plating A— Duplex .000030 A [3.77] Contact [0.00076] gold on contact area, D .100 .000150-.000300 [0.00381-0.00762] B [2.54] matte tin on solder area all over .000050 P.C. Board .069 [0.00127] nickel [1.75] Plating B— Duplex .000010 .228 [0.000254] gold on contact area, [5.78] .000150-.000300 [0.00381-0.00762] .075 matte tin on solder area all over .000050 [1.91] [P[lRe00lae..a00dlt00sai13,n t28agel71 ld C]-o 0 nvP—.i0ecrr0k o 7.e.00d6l002u00]c0 1mt55 0a0Dt -t[a.e00 t.t00ain00 31o02n07 s]o nldicekrel [.10.4027[D(.1±±F0i..0oa400.r.0200 Tb±±38yo.0]p0 t.D.t00oi38ma]. Recomm[.2e1.17nC09d]ed PC Board[ .1P0.65a02d] MPiant.tern [.20.[[92.1.10008..4040]2727Ty±±±±p.0.000...00003838]] DDiiaa.. AssemblieSurface Mount Re Mateable Headers— entry or pass (.008 [0.20] thick stencil) sce thru applica- p Refer to Mating Post Selection Guide — tions) tac page 90 le Performance Specifications— page 186 5 Packaged in Tubes Packaged in Tape & Reel No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos. Pos. A B C D Plating A Plating B Plating C Plating A Plating B Plating C 3 .500 [12.70] .200 [5.08] See note 3 .400 [10.16] 5-147744-1 5-147743-1 5-147742-1 5-147724-1 5-147730-1 5-147731-1 4 .600 [15.24] .300 [7.62] See note 3 .500 [12.70] 5-147744-2 5-147743-2 5-147742-2 5-147724-2 5-147730-2 5-147731-2 5 .700 [17.78] .400 [10.16] See note 3 .600 [15.24] 5-147744-3 5-147743-3 5-147742-3 5-147724-3 5-147730-3 5-147731-3 6 .800 [20.32] .500 [12.70] See note 3 .700 [17.78] 5-147744-4 5-147743-4 5-147742-4 5-147724-4 5-147730-4 5-147731-4 7 .900 [22.86] .600 [15.24] See note 3 .800 [20.32] 5-147744-5 5-147743-5 5-147742-5 5-147724-5 5-147730-5 5-147731-5 8 1.000 [25.40] .700 [17.78] See note 3 .900 [22.86] 5-147744-6 5-147743-6 5-147742-6 5-147724-6 5-147730-6 5-147731-6 9 1.100 [27.94] .800 [20.32] See note 3 1.000 [25.40] 5-147744-7 5-147743-7 5-147742-7 5-147724-7 5-147730-7 5-147731-7 10 1.200 [30.48] .900 [22.86] See note 3 1.100 [27.94] 5-147744-8 5-147743-8 5-147742-8 5-147724-8 5-147730-8 5-147731-8 11 1.300 [33.02] 1.000 [25.40] See note 3 1.200 [30.48] 5-147744-9 5-147743-9 5-147742-9 5-147724-9 5-147730-9 5-147731-9 12 1.400 [35.56] 1.100 [27.94] See note 3 1.300 [33.02] 6-147744-0 6-147743-0 6-147742-0 6-147724-0 6-147730-0 6-147731-0 13 1.500 [38.10] 1.200 [30.48] See note 3 1.400 [35.56] 6-147744-1 6-147743-1 6-147742-1 6-147724-1 6-147730-1 6-147731-1 14 1.600 [40.64] 1.300 [33.02] See note 3 1.500 [38.10] 6-147744-2 6-147743-2 6-147742-2 6-147724-2 6-147730-2 6-147731-2 15 1.700 [43.18] 1.400 [35.56] See note 3 1.600 [40.64] 6-147744-3 6-147743-3 6-147742-3 6-147724-3 6-147730-3 6-147731-3 16 1.800 [45.72] 1.500 [38.10] See note 3 1.700 [43.18] 6-147744-4 6-147743-4 6-147742-4 6-147724-4 6-147730-4 6-147731-4 17 1.900 [48.26] 1.600 [40.64] See note 3 1.800 [45.72] 6-147744-5 6-147743-5 6-147742-5 6-147724-5 6-147730-5 6-147731-5 18 2.000 [50.80] 1.700 [43.18] See note 3 1.900 [48.26] 6-147744-6 6-147743-6 6-147742-6 6-147724-6 6-147730-6 6-147731-6 19 2.100 [53.34] 1.800 [45.72] See note 3 2.000 [50.80] 6-147744-7 6-147743-7 6-147742-7 6-147724-7 6-147730-7 6-147731-7 20 2.200 [55.88] 1.900 [48.26] See note 3 2.100 [53.34] 6-147744-8 6-147743-8 6-147742-8 6-147724-8 6-147730-8 6-147731-8 30 3.200 [81.28] 2.900 [73.66] See note 3 3.100 [78.74] 7-147744-8 7-147743-8 7-147742-8 7-147724-8 7-147730-8 7-147731-8 40 4.300[109.22] 4.100[104.14] 2.100[53.34] 4.200[106.68] 8-147744-8 8-147743-8 8-147742-8 8-147724-8 8-147730-8 8-147731-8 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application 3. No center hold down. Note:All part numbers are RoHS compliant. 187 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Receptacle Assemblies, Single-Row, Surface Mount, .100 [2.54] x .100 [2.54] Centerline End To End Stackable without Compliant Pin Holddowns Surface Mount,Single-Row, [.00.2501]Standoff Typ. Dual Entry, End to End Stackable .265 [6.73] .107 Material and Finish .100 A [2T.y7p2.] [.52.0288]Max. Housing— Glass-filled thermoplastic, [2.54]Typ. (Localized Gold black, 94V-0 rated Plate Area) Contacts— Phosphor bronze, plated as follows: .140 [3.56] Plating A— Duplex .000030 [0.00076] gold on contact area, .000150-.000300 [0.00381-0.00762] .148 Point of matte tin on solder area all over .000050 [3.77] Contact [0.00127] nickel Plating B— Duplex .000010 [0.000254] gold on contact area, B .040±.003 Dia. Typ. .000150-.000300 [0.00381-0.00762] [1.02±0.08] e cl matte tin on solder area all over .000050 (For bottom entry or pass a .100 through applications) pt [0.00127] nickel [2.54] e cs Plating C— .000150-.000300 ee Mount Rssembli [le0a.0d0s3, 8al1l -o0v.0er0 7.06020]0 m50at t[e0 .t0in0 1o2n7 s]o nldicekrel [.52.2788] e A Related Product Data c a Surf MReafetre taob Mlea tHinega Pdoesrts S—ele ction Guide — [.10.6502]Min. .090 page 90 [2.28] 5 Performance Specifications— Recommended PC Board Pad Pattern page 186 (.008 [0.20] thick stencil) Packaged in Tubes Packaged in Tape & Reel No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos. Pos. A B Plating A Plating B Plating C Plating A Plating B Plating C 3 .300 [7.62] .200 [5.08] 5-147738-2 5-147737-2 5-147736-2 5-147723-2 5-147728-2 5-147729-2 4 .400 [10.16] .300 [7.62] 5-147738-3 5-147737-3 5-147736-3 5-147723-3 5-147728-3 5-147729-3 5 .500 [12.70] .400[10.16] 5-147738-4 5-147737-4 5-147736-4 5-147723-4 5-147728-4 5-147729-4 6 .600 [15.24] .500[12.70] 5-147738-5 5-147737-5 5-147736-5 5-147723-5 5-147728-5 5-147729-5 7 .700 [17.78] .600[15.24] 5-147738-6 5-147737-6 5-147736-6 5-147723-6 5-147728-6 5-147729-6 8 .800 [20.32] .700[17.78] 5-147738-7 5-147737-7 5-147736-7 5-147723-7 5-147728-7 5-147729-7 9 .900 [22.86]] .800[20.32] 5-147738-8 5-147737-8 5-147736-8 5-147723-8 5-147728-8 5-147729-8 10 1.000 [25.40] .900[22.86] 5-147738-9 5-147737-9 5-147736-9 5-147723-9 5-147728-9 5-147729-9 11 1.100 [27.94] 1.000[25.40] 6-147738-0 6-147737-0 6-147736-0 6-147723-0 6-147728-0 6-147729-0 12 1.200 [30.48] 1.100[27.94] 6-147738-1 6-147737-1 6-147736-1 6-147723-1 6-147728-1 6-147729-1 13 1.300 [33.02] 1.200[30.48] 6-147738-2 6-147737-2 6-147736-2 6-147723-2 6-147728-2 6-147729-2 14 1.400 [35.56] 1.300[33.02] 6-147738-3 6-147737-3 6-147736-3 6-147723-3 6-147728-3 6-147729-3 15 1.500 [38.10] 1.400[35.56] 6-147738-4 6-147737-4 6-147736-4 6-147723-4 6-147728-4 6-147729-4 16 1.600 [40.64] 1.500[38.10] 6-147738-5 6-147737-5 6-147736-5 6-147723-5 6-147728-5 6-147729-5 17 1.700 [43.18] 1.600[40.64] 6-147738-6 6-147737-6 6-147736-6 6-147723-6 6-147728-6 6-147729-6 18 1.800 [45.72] 1.700[43.18] 6-147738-7 6-147737-7 6-147736-7 6-147723-7 6-147728-7 6-147729-7 19 1.900 [48.26] 1.800[45.72] 6-147738-8 6-147737-8 6-147736-8 6-147723-8 6-147728-8 6-147729-8 20 2.000 [50.80] 1.900[48.26] 6-147738-9 6-147737-9 6-147736-9 6-147723-9 6-147728-9 6-147729-9 30 3.000 [76.20] 2.900[73.66] 7-147738-9 7-147737-9 7-147736-9 7-147723-9 7-147728-9 7-147729-9 40 4.000[101.60] 3.900[99.06] 8-147738-9 8-147737-9 8-147736-9 8-147723-9 8-147728-9 8-147729-9 Notes: 1. Tyco Electronics recommends mating gold or duplex plated headers with duplex plated receptacle assemblies. 2. To obtain the minimum mating post length, add .020 [0.51] (not including the post lead in chamfer) to the maximum point-of-contact dimension, and .062 [1.57] for recommended board thickness if used in bottom entry application. Note:All part numbers are RoHS compliant. 188 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centers Surface Mount,Double Row, Dual Entry with Holddowns A .100 .050 [2.54] [1.27] Typ. Typ. .198 [5.03] .107 .265 .148 Point of [2.72] [6.73] [3.76] Contact Typ. Material and Finish Typ. Typ. (Localized Gold Plate Area) Housing — Glass-filled thermoplastic, black, 94V-0 rated Contacts — Phosphor bronze, plated .083 [2.12] as follows: Typ. Plating A — Duplex .000030 [0.00076] .020 gold on contact area, .000150-.000300 [0.51] .027±.002 [0.00381-0.00762] matte tin on solder Typ. [0.69±0.05] Typ. .266 area all over .000050 [0.00127] nickel [6.75] Plating B — Duplex .000010 .110 [0.000254] gold on contact area, [2.79] .000150-.000300 [0.00381-0.00762] Typ. .238 S matte tin on solder area all over .000050 B [6.05] u [0.00127] nickel Typ. rfa .040±.003 c P[le0la.a0dt0si3,n 8agl1 l C-o0 v.—0er0 7..00600200]0 1m550a0t -t[e.00 .t00in00 31o02n07 s]o nldicekrel [.21.0504]Typ. [1.02±0.08] [.2T1.y05p04.] Assembliee Mount Re .004 sce Related Product Data [0T.y1p0.] ptac Mateable Headers — .075 le .090 [1.91] Refer to Mating Post Selection Guide — [2.29] Typ. page 90 Typ. .040 5 Performance Specifications — [1.02] page 186 [.10.4002±±.00.0038] D Typ. (For bottom entry or pass thru applications) .060 [1.52] Typ. Technical Documents — page 276 C Product Specification Recommended PC Board Layout 108-25022 (.008 [0.20] thick stencil) Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug PPaarrtt NNoo.. 8866228866--11 ((PPlluuggss iinnttoo rreecceeppttaaccllee ccoonnttaacctt)) Material— Natural color nylon Note:All part numbers are RoHS compliant. 189 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centers (Continued) Packaged in Tubes Packaged in Tape and Reel Dimensions No. of Contact Plating/Part Nos. Contact Plating/Part Nos. A B C D Pos. Plating A Plating B Plating C Plating A Plating B Plating C 10 .700 [17.78] .400[10.16] .600 [15.24] See Note 1 5-147102-5 5-147101-5 5-147103-5 5-147747-5 5-147746-5 5-147745-5 14 .900 [22.86] .600[15.24] .800 [20.32] See Note 1 5-147102-7 5-147101-7 5-147103-7 5-147747-7 5-147746-7 5-147745-7 20 1.200 [30.48] .900[22.86] 1.100 [27.94] See Note 1 6-147102-0 6-147101-0 6-147103-0 6-147747-0 6-147746-0 6-147745-0 22 1.300 [33.02] 1.000[25.40] 1.200 [30.48] See Note 1 6-147102-1 6-147101-1 6-147103-1 6-147747-1 6-147746-1 6-147745-1 26 1.500 [38.10] 1.200[30.48] 1.400 [35.56] See Note 1 6-147102-3 6-147101-3 6-147103-3 6-147747-3 6-147746-3 6-147745-3 30 1.700 [43.18] 1.400[35.56] 1.600 [40.64] See Note 1 6-147102-5 6-147101-5 6-147103-5 6-147747-5 6-147746-5 6-147745-5 34 1.900 [48.26] 1.600[40.64] 1.800 [45.72] See Note 1 6-147102-7 6-147101-7 6-147103-7 6-147747-7 6-147746-7 6-147745-7 36 2.000 [50.08] 1.700[43.18] 1.900 [48.26] See Note 1 6-147102-8 6-147101-8 6-147103-8 6-147747-8 6-147746-8 6-147745-8 40 2.200 [55.88] 1.900[48.26] 2.100 [53.34] See Note 1 7-147102-0 7-147101-0 7-147103-0 7-147747-0 7-147746-0 7-147745-0 46 2.500 [63.50] 2.200[55.88] 2.400 [60.96] See Note 1 7-147102-3 7-147101-3 7-147103-3 7-147747-3 7-147746-3 7-147745-3 50 2.700 [68.58] 2.400[60.96] 2.600 [66.04] See Note 1 7-147102-5 7-147101-5 7-147103-5 7-147747-5 7-147746-5 7-147745-5 62 3.300 [83.82] 3.000[76.20] 3.200 [81.28] See Note 1 8-147102-1 8-147101-1 8-147103-1 8-147747-1 8-147746-1 8-147745-1 64 3.400 [86.36] 3.100[78.74] 3.300 [83.82] See Note 1 8-147102-2 8-147101-2 8-147103-2 8-147747-2 8-147746-2 8-147745-2 66 3.500 [88.90] 3.200[81.28] 3.400 [86.36] See Note 1 8-147102-3 8-147101-3 8-147103-3 8-147747-3 8-147746-3 8-147745-3 70 3.700 [95.98] 3.400[86.36] 3.600 [91.44] See Note 1 8-147102-5 8-147101-5 8-147103-5 8-147747-5 8-147746-5 8-147745-5 80 4.300[109.22] 3.900[99.06] 4.200[106.68] 2.100[53.34] 9-147102-0 9-147101-0 9-147103-0 9-147747-0 9-147746-0 9-147745-0 Notes:1. No center holddown. 2. To obtain the minimum mating post length, add .020 [0.51] (not includingthe post lead in chamfer) to the maximum point-of-contact dimension and .062 [1.57] for recommended board thickness in bottom entry applications. e cl a pt e cs ee nt Rmbli Mousse e A c a urf S 5 Note:All part numbers are RoHS compliant. 190 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Surface Mount,Double Row, A Dual Entry .100 End to End Stackable [2.54]Typ. .100 [2.54]Typ. .198±.002 [5.03±0.05] .050 [1.27] Max. .148 Point of .265 [3.76] Contact .107 Material and Finish [6.73] [2.72] Typ. (Localized Gold Housing — Glass-filled thermoplastic, Plate Area) black, 94V-0 rated Contacts — Phosphor bronze, plated as follows: Pgolaldt ionng cAo n—tac Dt aurpelae,x . 0.00000105300- .[000.000300706] [.00.2501 ] [.00.2679±±.00.0025] Typ. [.62.6765] [0.00381-0.00762] matte tin on solder Typ. area all over .000050 [0.00127] nickel Plating B — Duplex .000010 S [0.000254] gold on contact area, B [.62.3085] urfa .000150-.000300 [0.00381-0.00762] .100 Typ. ce matte tin on solder area all over .000050 [2.54] As M [0.00127] nickel Typ. .100 semoun P[0l.a0t0i3n8g1 C-0 .—00 7.06020] 1ti5n0--le.0a0d0 o3v0e0r [2T.y5p4.] bliest Rec .000050 [0.00127] nickel .004 ep [0.10] ta Typ. cle Related Product Data .090 [2.29] .060 5 Mateable Headers — .040 [1.52]Typ. Refer to Mating Post Selection Guide — [1.02]Typ. page 90 Recommended PC Board Pad Layout Performance Specifications — (.008 [0.20] thick stencil) page 186 (for Bottom Entry and Pass Through applications) Technical Documents — page 276 Product Specification 108-25022 Application Specification 114-25018 Additional receptacle assembly sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Keying Plug PPaarrtt NNoo.. 8866228866--11 ((PPlluuggss iinnttoo rreecceeppttaaccllee ccoonnttaacctt)) Material— Natural color nylon Note:All part numbers are RoHS compliant. 191 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Surface Mount Receptacle Assemblies, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Packaged in Tubes Packaged in Tape & Reel No. of Dimensions Contact Plating/ Part Nos. Contact Plating/ Part Nos. Pos. A B Plating A Plating B Plating C Plating A Plating B Plating C 10 .500 [12.70] .400[10.16] 5-147741-5 5-147740-5 5-147739-5 5-147105-5 5-147104-5 5-147106-5 14 .700 [17.78] .600[15.24] 5-147741-7 5-147740-7 5-147739-7 5-147105-7 5-147104-7 5-147106-7 20 1.000 [25.40] .900[22.86] 6-147741-0 6-147740-0 6-147739-0 6-147105-0 6-147104-0 6-147106-0 22 1.100 [27.94] 1.000[25.40] 6-147741-1 6-147740-1 6-147739-1 6-147105-1 6-147104-1 6-147106-1 26 1.300 [33.02] 1.200[30.48] 6-147741-3 6-147740-3 6-147739-3 6-147105-3 6-147104-3 6-147106-3 30 1.500 [38.10] 1.400[35.56] 6-147741-5 6-147740-5 6-147739-5 6-147105-5 6-147104-5 6-147106-5 34 1.700 [43.18] 1.600[40.64] 6-147741-7 6-147740-7 6-147739-7 6-147105-7 6-147104-7 6-147106-7 36 1.800 [45.72] 1.700[43.18] 6-147741-8 6-147740-8 6-147739-8 6-147105-8 6-147104-8 6-147106-8 40 2.000 [50.80] 1.900[48.26] 7-147741-0 7-147740-0 7-147739-0 7-147105-0 7-147104-0 7-147106-0 46 2.300 [58.42] 2.200[55.88] 7-147741-3 7-147740-3 7-147739-3 7-147105-3 7-147104-3 7-147106-3 50 2.500 [63.50] 2.400[60.96] 7-147741-5 7-147740-5 7-147739-5 7-147105-5 7-147104-5 7-147106-5 62 3.100 [78.74] 3.000[76.20] 8-147741-1 8-147740-1 8-147739-1 8-147105-1 8-147104-1 8-147106-1 64 3.200 [81.28] 3.100[78.74] 8-147741-2 8-147740-2 8-147739-2 8-147105-2 8-147104-2 8-147106-2 66 3.300 [83.82] 3.200[81.28] 8-147741-3 8-147740-3 8-147739-3 8-147105-3 8-147104-3 8-147106-3 70 3.500 [88.90] 3.400[86.36] 8-147741-5 8-147740-5 8-147739-5 8-147105-5 8-147104-5 8-147106-5 80 4.000[101.60] 3.900[99.06] 9-147741-0 9-147740-0 9-147739-0 9-147105-0 9-147104-0 9-147106-0 Notes:1.To obtain the minimum mating post length, add .020 [0.51] (not includingthe post lead in chamfer) to the maximum point-of-contact dimension and .062 [1.57] for recommended board thickness in bottom entry applications. e cl a pt e cs ee nt Rmbli Mousse e A c a urf S 5 Note:All part numbers are RoHS compliant. 192 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Two-Piece Printed Circuit Board Connectors Product Facts ■ Two-Piece reliability ■ Two- and three-row systems available ■ Short signal path for VLSI applications ■ Receptacles employ dual cantilever beams and built- in anti-overstress to provide reliable connections ■ Built-in guides provide alignment before contact engagement ■ Closed entry receptacle housings provide lead-in ramp for positive mating of contacts ■ Shrouded headers provide full pin protection ■ Polarized headers ■ Vertical headers available with ACTION PIN posts or P .025 [0.64] square solder rin Cte posts od ■ Rpoesptasirable ACTION PIN nnectors Circuit B o ■ Simple seating tooling for a headers with ACTION PIN rd posts ACTION PIN Posts Solder Posts ■ Recognized under the 5 Component Program of Underwriters Laboratories Inc., R File No. E28476 ■ Certified by Canadian Standards Receptacle Contact Association, R (Double Beam with Anti-Overstress) File No. LR 7189 Board Retention Feature Available 3-Row Closed Entry 3-Row Header Receptacle 5-534974-8 5-103264-3 5-532956-3 Horizontal Receptacle 5-534972-2 Vertical Receptacle 5-102690-3 Vertical Header Double-Row with ACTION PIN Make First/Break Posts Last Header (Part Nos. available upon request) 6-102589-2 3/4 Shroud, Right Angle Header For drawings, technical data or samples, contact your Tyco Electronics sales engi- 5-532956-3 Horizontal Note:All part numbers are RoHS Receptacle neer or call the Tyco Electronics Product compliant. Information Center: 1-800-522-6752 193 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Two-Piece Printed Circuit Board Connectors (Continued) AMPMODU Two-Piece The AMPMODU three-row A board retention feature Printed Circuit Board connector system is is offered in the two-row connectors are designed produced in 30 through 300 horizontal receptacles, to reliably and economically positions (straight post two-row right angle headers meet the packaging and headers and mating and two- and three-row interconnection requirements horizontal receptacles). vertical headers. Built-in of today’s sophisticated guides assure accurate Both two- and three-row electronics. header and receptacle vertical headers are alignment before contact The double row system is available with press-fit engagement. produced in 10 thru 200 ACTION PIN posts or positions in the vertical standard .025 [0.64] square Closed entry receptacle headers and horizontal solder posts. There is a housings provide a lead-in receptacles, and 10 thru simple seating tool for ramp for positive mating of 160 positions in the right headers with ACTION PIN contacts. angle headers and vertical posts. receptacles. Performance Specifications Temperature Rating— Current Rating— Headers and Receptacles — 3 amperes max. for single contact; –65°C to +125°C (black thermoplastic 2 amperes max. per contact for fully housings, 94V-0 rated) energized connector Durability (Tested to)— 200 cycles Voltage Rating— 250 VAC for .000030 [0.00076] gold plating; d 75 cycles for .000015 [0.00038] gold oar Dielectric Rating— 750 VAC rms plating Bs between contacts for one minute d Circuit onnector T1tee2s rtm mciulilrniroaehntmito, san nm Rda e5xs0. i amst t1ial0lni0vco meltsi—l loiap menp ecrier-s MmUnaaxmtiimnagutim nFg op reFcro ecroc—neta —8c to z.7. 5[2 o.2z.2 [N0]. 2N] nteC cuit voltage minimum per contact during third Pri Insulation Resistance— 1000 mating cycle megohms after temperature/humidity cycling 5 194 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Receptacle Assemblies, Board Mount, Double-Row, Closed Entry, .100 x .100 [2.54 x 2.54] Centerline Horizontal Mount (with Guide Pin Slots and Standoffs) .320 [8.13] .174 Max. [4.42] (Point of Contact) A .179 .256 Material and Finish B [4.55] [6.50]Min. Housing — Glass-filled thermoplastic, Typ. (See Note 3.) black, 94V-0 rated Contacts — Phosphor bronze, plated .100 as follows: [2.54] .238 Plating A — Duplex plated .000030 [6.05] [0.00076] gold on contact area, .000050- .144 .000100 [0.00127-0.00254] matte tin on [3(.26 6P]lcD.i)a. [.10.6795] [.31.2157] spolaldteedr .a0r0e0a,0 w50it h[ 0e.n0t0ir1e2 c7o] nntiacckte ulnder- [.21.1952 oorr 3.1.6485] Gol(dL oPclaatleiz eAdrea) CL .310±.010CL Plating B — Duplex plated .000015 (See Note 1) [7.88±0.25] [0.00038] gold on contact area, .000050-.000100 [0.00127-0.00254] matte tin on solder area, with entire con- tact underplated .000050 [0.00127] nickel Related Product Data .115 or .145 .115 Mateable Headers — pages 198, 199 [2.92 or 3.68] [2.92] (See Note 2) (See Note 2) PpTP10aereg8ocre-dfh2o u1n5r9cm0i4tc1 aSa7npl ceDeco iSfcipcueamctiieofinnctast i—on sp a—ge 276 [.73.1807±±.00S.00t25a]ndard Solder Tails Board Reten[[.1.2t01..i6605o5504nt±±±±o .0.0T00..a0101i5353l]]s Keying Plug ConnectorsPrinted Circuit B A11p4p-l9i0c0a9tion Specification [.00.38(59F±±in.00is.00h38e]dT yHpo. leD)ia. [.21.0504±±.00.0038] Part No. 86286-1 oard Additional receptacle assembly Recommended PC Board Hole Layout (Plugs into receptacle contact) sizes and solder tail lengths (for .055 [1.40] min. thick PC board) Material— Natural color nylon are available; minimum order Tolerances not to accumulate within 5 quantities may apply. Consult one connector pattern. Tyco Electronics. Receptacle Assembly Part Nos. Receptacle Assembly Part Nos. No. of Dimensions with .115 [2.92] Solder Tail Lengths with .145 [3.68] Solder Tail Lengths Pos. A B Standard Solder Tails Board Retention Tails Standard Solder Tails Plating A Plating B Plating A Plating B Plating A 12 .858 [21.79] .500 [12.70] 5-532956-1 5-532955-1 5-534204-2 5-534975-5 5-533009-1 14 .958 [24.33] .600 [15.24] — 7-532955-5 — — — 16 1.058 [26.87] .700 [17.78] 5-532956-2 — 6-534204-0 6-534975-5 — 20 1.258 [31.95] .900 [22.86] 5-532956-3 5-532955-3 5-534204-9 5-534975-6 — 24 1.458 [37.03] 1.100 [27.94] 5-532956-4 5-532955-4 6-534204-1 5-534975-7 — 30 1.758 [44.65] 1.400 [35.56] 5-532956-5 5-532955-5 5-534204-4 5-534975-8 5-533009-5 36 2.058 [52.27] 1.700 [43.18] 5-532956-6 5-532955-6 5-534204-3 5-534975-9 — 40 2.258 [57.35] 1.900 [48.26] 5-532956-7 5-532955-7 6-534204-2 6-534975-0 — 50 2.758 [70.05] 2.400 [60.96] 5-532956-8 5-532955-8 5-534204-1 6-534975-1 5-533009-8 60 3.258 [82.75] 2.900 [73.66] 5-532956-9 5-532955-9 5-534204-5 6-534975-2 5-533009-9 70 3.758 [95.45] 3.400 [86.36] 6-532956-0 6-532955-0 6-534204-3 6-534975-3 6-533009-0 72 3.858 [97.99] 3.500 [88.90] 6-532956-1 6-532955-1 6-534204-4 — — 80 4.258 [108.15] 3.900 [99.06] 6-532956-2 6-532955-2 5-534204-8 6-534975-4 6-533009-2 86 4.558 [115.77] 4.200 [106.68] 6-532956-3 6-532955-3 — — 6-533009-3 90 4.758 [120.85] 4.400 [111.76] 6-532956-4 6-532955-4 — — — 96 5.058 [128.47] 4.700 [119.38] 6-532956-5 6-532955-5 6-534204-5 — 6-533009-5 100 5.258 [133.55] 4.900 [124.46] 6-532956-6 6-532955-6 5-534204-6 5-534975-1 6-533009-6 110 5.758 [146.25] 5.400 [137.16] 6-532956-7 6-532955-7 6-534204-6 — — 120 6.258 [158.95] 5.900 [149.86] 6-532956-8 6-532955-8 5-534204-7 5-534975-2 6-533009-8 130 6.758 [171.65] 6.400 [162.56] 7-532956-0 7-532955-0 6-534204-7 — — 200 10.258 [260.55] 9.900 [251.46] 7-532956-3 7-532955-3 7-534204-0 5-534975-4 — Notes:1. .115 [2.92] tail length is for use with .062 [1.57] PC boards; .145 [3.68] tail length is for use with .093 [2.36] PC boards. Notes:2. Receptacle assemblies with low force contacts are available, consult Tyco Electronics. 3. .256 [6.50] minimum positive pin stop to prevent shorting between rows. Note:All part numbers are RoHS compliant. 195 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Receptacle Assemblies, Board Mount, Double-Row, Closed Entry, .100 x .100 [2.54 x 2.54] Centerline (Continued) Vertical Mount .115 [2.92] (with Guide Pin Slots and .129 Standoffs) Typ. [3.28] .410 [10.41] .320 [8.13] Material and Finish .125 Housing — Glass-filled thermoplastic, .100 Typ. B[±±.00.0280] [.41.7595]Typ. (Lo[3c.a1l8iz]ed [2.54] Gold Plate Area) black, 94V-0 rated Contacts — Phosphor bronze, duplex .144 .238 plated .000030 [0.00076] gold on [3.68] [6.05] contact area, .000050-.000100 Dia. .069 [0.00127-0.00254] matte tin on solder [1.75] .100 .100 area, with entire contact underplated A Typ. [2.54] [2.54] .000050 [0.00127] nickel Related Product Data .100±.003 Mateable Headers — pages 198, 199 [2.54±0.08] ard Performance Specifications — o page 194 Bs d Circuit onnector Technical Documents — page 276 [.21.0504±±.00.0038] [.00.3859±±.00.0038]Typ. Dia. eC nt Product Specification Recommended PC Board Hole Layout Pri 108-25017 (for .055 [1.40] min. thick PC board) Tolerances not to accumulate within one Application Specification connector pattern. 114-9009 5 Additional receptacle assembly sizes and solder tail lengths are available; minimum order quantities may apply. Consult Tyco Electronics. No. of Dimensions Receptacle Assembly Pos. A B Part Nos. 30 1.758 [44.65] 1.400 [35.56] 5-534972-1 40 2.258 [57.35] 1.900 [48.26] 5-534972-2 50 2.758 [70.05] 2.400 [60.96] 5-534972-3 60 3.258 [82.75] 2.900 [73.66] 5-534972-4 70 3.758 [95.45] 3.400 [86.36] 5-534972-5 80 4.258 [108.15] 3.900 [99.06] 5-534972-6 Keying Plug 90 4.758 [120.85] 4.400 [111.76] 5-534972-7 100 5.258 [133.55] 4.900 [124.46] 5-534972-8 120 6.258 [158.95] 5.900 [149.86] 6-534972-0 Part No. 86286-1 (Plugs into receptacle contact) Material— Natural color nylon Note:All part numbers are RoHS compliant. 196 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Receptacle Assemblies, Board Mount, Triple-Row, Closed Entry, .100 x .100 [2.54 x 2.54] Centerline Horizontal Mount (with Guide Pin Slots and A Standoffs) .410 [10.41] .125 .179 Typ. B [3.18] [4.55] .100 (Localized Typ. Material and Finish [2.54] .100 Gold Plate Area) [2.54] .338 Housing — Glass-filled thermoplastic, [8.59] bCloacnkt,a 9c4tsV -—0 r aPtheodsphor bronze, plated [.31.4646] .069 [.21.0504] [.21.1952] [.31.4658] .000030 [0.00076] gold in mating area, Dia. [1.75] .000050-.000100 [0.00127-0.00254] Typ. matte tin on solder area, with entire .300 contact underplated .000050 [0.00127] [7.62] nickel .400 [10.16] Related Product Data Mateable Headers — page 201 Performance Specifications — page 194 .115 .145 P [2.92] [3.68] rin Tail Length Cte od TP10er8oc-dh2un5c0itc1 Sa7pl eDcoifcicuamtieonnts — page 276 [.21.0504±±.00.0038] [.00.3859±±.00.0038]Typ. Dia. nnectors Circuit Bo a Application Specification rd 114-9009 .400 Additional receptacle assembly [10.16] .300 5 sizes and solder tail lengths [7.62] are available; minimum order quantities may apply. Consult Tyco Electronics. .065±.005 [1.65±0.13] Recommended PC Board Hole Layout (for .055 [1.40] min. thick PC board) Tolerances not to accumulate within one connector pattern. No. of Dimensions Receptacle Assembly Part Nos. Pos. A B Plating A 72 2.658 [67.51] 2.300 [58.42] 5-534974-3 93 3.358 [85.29] 3.000 [76.20] 15-534974-4 96 3.458 [87.83] 3.100 [78.74] 1-5-534974-5 150 5.258 [133.55] 4.900 [124.46] 1-5-534974-8 Keying Plug 210 7.258 [184.35] 6.900 [175.26] 6-534974-1 Part No. 86286-1 (Plugs into receptacle contact) Material— Natural color nylon Note:All part numbers are RoHS compliant. 197 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Solder Posts and Pos. Ref. ACTION PIN Posts .065 R [1.66] (with Pin Protection 1 2 3 (2 Plc.) and Guide Pins) .100 [2.54] .515 [13.08] .085 .200 .130 [2.16] [5.08] [3.30] .040 B (2 Plc.) [1.02] (4 Sides) A Material and Finish .200 [5.08] Housing — Glass-filled thermoplastic, .110 (Localized black, 94V-0 rated [2.79] Gold Plate Posts — Phosphor bronze, plated as Area) follows: Plating A — Duplex plated .000030 .440 .320 [11.18] [8.13] [0.00076] gold on contact area, .000100-.000200 [0.00254-0.00508] matte tin on termination end, with entire post underplated .000050 [0.00127] .130 .090 nickel [3.30] Bo(warhde Rree itnednitcioante Tda)ils [.41.8507] [2.29] Plating B — Duplex plated .000015 [0.00038] gold on contact area, d .000100-.000200 [0.00254-0.00508] .100±.003 .040±.003 .180 ar matte tin on termination end, with entire [2.54±0.08] [1.02±0.08] [4.57] Bos post underplated .000050 [0.00127] (Finished Hole) nted Circuit Connector nP[.00il0c.a0k0t0e0i0ln17g56 C[]0 g.—0o0ld 0S 3oe8nle] ccgotionvletdal yco tpn al atreeteramd a i.nn0da0t0io0n30 [.21.0504±±.00.0038] (D.[01r4.i0l5le23d±± 0H.0.0o03l1e]) Pri end, with gold flash over .000050 Recommended PC Board Hole Layout .025 [0.64] Square Board Retention Tails [0.00127] nickel on entire post (for .055 [1.40] min. thick PC board) Tolerances not to accumulate within one connector pattern. 5 Related Product Data Mateable Receptacles — pages 195, 196 Header Part Nos. with .180 [4.57] Tail Length Performance Specifications — No. of Dimensions Standard Solder Tails Board Retention Tails page 194 Pos. A B Plating A Plating B Plating A Plating B ACTION PIN Posts—pages 150, 151 12 .980 [24.89] .500 [12.70] 5-102692-1 5-102567-1 6-534978-6 5-534257-5 Application Tooling —pages 152 14 1.080 [27.43] .600 [15.24] — 7-102567-3 — — Technical Documents — page 276 16 1.180 [29.97] .700 [17.78] 6-102692-5 — 5-534978-2 6-534257-4 20 1.380 [35.05] .900 [22.86] 6-102692-6 6-102567-1 5-534978-3 5-534257-6 Product Specification 24 1.580 [40.13] 1.100 [27.94] 5-102692-2 5-102567-2 5-534978-4 5-534257-7 108-25017 30 1.880 [47.75] 1.400 [35.56] 6-102692-7 6-102567-3 5-534978-5 5-534257-8 Application Specification 36 2.180 [55.37] 1.700 [43.18] 5-102692-3 5-102567-3 5-534978-6 5-534257-9 114-9009 40 2.380 [60.45] 1.900 [48.26] 6-102692-3 6-102567-2 5-534978-7 6-534257-0 50 2.880 [73.15] 2.400 [60.96] 5-102692-4 5-102567-6 5-534978-8 6-534257-5 Additional header sizes are available; minimum order 60 3.380 [85.85] 2.900 [73.66] 5-102692-5 5-102567-4 5-534978-9 6-534257-1 quantities may apply. Consult 70 3.880 [98.55] 3.400 [86.36] 6-102692-4 6-102567-0 6-534978-5 6-534257-2 Tyco Electronics. 72 3.980 [101.09] 3.500 [88.90] 6-102692-8 6-102567-6 6-534978-0 — 80 4.380 [111.25] 3.900 [99.06] 5-102692-6 5-102567-8 6-534978-1 5-534257-1 86 4.680 [118.87] 4.200 [106.68] 6-102692-9 6-102567-7 — — 90 4.880 [123.95] 4.400 [111.76] 6-102692-2 6-102567-4 — — 96 5.180 [131.57] 4.700 [119.38] 5-102692-7 5-102567-5 6-534978-7 — 100 5.380 [136.65] 4.900 [124.46] 5-102692-8 5-102567-9 6-534978-8 5-534257-2 110 5.880 [149.35] 5.400 [137.16] 6-102692-0 6-102567-5 6-534978-2 — 120 6.380 [162.05] 5.900 [149.86] 5-102692-9 5-102567-7 6-534978-3 5-534257-3 130 6.880 [174.75] 6.400 [162.56] 7-102692-0 6-102567-9 6-534978-9 — 200 10.380 [263.65] 9.900 [251.46] 6-102692-1 7-102567-1 5-534978-1 6-534257-9 Note: Headers with make first/break last posts can be made available, consult Tyco Electronics. Note:All part numbers are RoHS compliant. 198 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Headers, Straight Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) See chart below .025 [0.64] Square ACTION PIN Tails Header Part Nos. with ACTION PIN Posts No. of Dimensions .250 [6.35] Tail Length .480 [12.19] Tail Length .680 [17.27] Tail Length Pos. A B Plating A Plating B Plating A Plating C Plating C 12 .980 [24.89] .500 [12.70] 5-102690-1 5-103291-4 — — — 14 1.080 [27.43] .600 [15.24] — 5-103291-3 — — — 20 1.380 [35.05] .900 [22.86] 6-102690-3 5-103291-6 — — — 24 1.580 [40.13] 1.100 [27.94] 5-102690-2 5-103291-7 — — — 36 2.180 [55.37] 1.700 [43.18] 5-102690-3 5-103291-9 — — — 40 2.380 [60.45] 1.900 [48.26] 6-102690-6 5-103291-2 — — — 50 2.880 [73.15] 2.400 [60.96] 5-102690-4 6-103291-0 — — — 60 3.380 [85.85] 2.900 [73.66] 5-102690-5 6-103291-1 — — — 70 3.880 [98.55] 3.400 [86.36] 6-102690-7 6-103291-2 — — — 80 4.380 [111.25] 3.900 [99.06] 5-102690-6 6-103291-4 — — — 90 4.880 [123.95] 4.400 [111.76] 6-102690-1 6-103291-6 — — — 96 5.180[131.57] 4.700 [119.38] 5-102690-7 6-103291-8 — — — 100 5.380 [136.65] 4.900 [124.46] 5-102690-8 6-103291-9 — — 102777-3 120 6.380 [162.05] 5.900 [149.86] 5-102690-9 7-103291-1 5-102691-9 1-102666-1 102777-1 130 6.880 [174.75] 6.400 [162.56] — — — 102666-9 — P Notes:1. Other header sizes can be made available upon request. rin Headers with ACTION PIN posts are for use with .093 [2.36] nominal or thicker PC boards. Cte od 234... cHPAolpeanpatseldiucdela trt sthTi oyrwonciuo tthg oE ho.2l lehi5nco0gtlr e o[f6osn .rit3 coi5ns b]s. tetaa lpilli rnleegpn ahgretehad dc aepnres rb wreei tcmho amAdCmeT eaInOvdaNail atPiobIlnNes w pfooitushtn smd i aso knse hp ofairwgsnet/ bo1rn5e 1ap.ka glaesst 1co5n2t aacntds ,1 53. nnectors Circuit B o a rd 5 Note:All part numbers are RoHS compliant. 199 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Headers, Right-Angle Post, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Card Extender (with Pin Protection and Guide Pins) .762 Max. [19.35] .599 [15.21] .040 A [1.02] Typ. .320 Material and Finish [8.13] .100 [2.54] Housing — Glass-filled thermoplastic, .320 black, 94V-0 rated [8.13] Posts — Phosphor bronze, plated as follows: .065 .100 Plating A — Duplex plated .000030 [1(2.6 P5]lcR.) 2 3 4 Pos. Board Retention Tails (Lo[2c.a5l4iz]ed [.31.2158] [0.00076] gold on contact area, Ref. (where indicated) Gold Plate .157 .100 .000100-.000200 [0.00254-0.00508] .200 Area) [3.99] [2.54] [5.08] B matte tin on termination end, with entire Typ. .185 post underplated .000050 [0.00127] [4.70] nickel Typ. Plating B — Duplex plated .000015 oard [.000.000100308-].0 g0o0l2d0 o0n [ c0o.0n0ta2c5t4 a-r0e.a0,0508] [.1(0F.40in02i±±s.0h0.e00d38] [.21.0504±±.00.0038] .157 .125 d Circuit Bonnectors mpnoicaskttte eul tnind eornp ltaetremd i.n0a0t0io0n5 0en [d0,. 0w0i1th2 7en]tire w/BHdo. lReet.) [3.99] [3.18] eC Print Related Product Data [.00.3859±±.00.0038]Dia. Typ. Mateable Receptacles — (Standard .100±.003 .025 [0.64] Square pages 195, 196 Finished Hole) [2.54±0.08] Board Retention Tails 5 Performance Specifications — Recommended PC Board Hole Layout page 194 (for .055 [1.40] min. thick PC board) Tolerances not to accumulate within one Technical Documents — page 276 connector pattern. Product Specification 108-25017 Application Specification Header Part Nos. with .125 [3.18] Tail Length 114-9009 No. of Dimensions Standard Solder Tails Board Retention Tails Pos. A B Additional header sizes are Plating A Plating B Plating A available; minimum order 12 .980 [24.89] .500 [12.70] 6-102802-2 5-102589-8 5-534245-5 quantities may apply. Consult 16 1.180 [29.97] .700 [17.78] 6-102802-4 — 5-534245-4 Tyco Electronics. 20 1.380 [35.05] .900 [22.86] 6-102802-5 6-102589-2 5-534245-6 24 1.580 [40.13] 1.100 [27.94] 6-102802-3 5-102589-6 5-534245-7 30 1.880 [47.75] 1.400 [35.56] 6-102802-6 5-102589-4 5-534245-2 36 2.180 [55.37] 1.700 [43.18] 5-102802-3 5-102589-2 5-534245-8 40 2.380 [60.45] 1.900 [48.26] 5-102802-8 6-102589-3 — 50 2.880 [73.15] 2.400 [60.96] 5-102802-4 5-102589-5 5-534245-1 60 3.380 [85.85] 2.900 [73.66] 5-102802-9 5-102589-7 — 72 3.980 [101.09] 3.500 [88.90] 6-102802-7 6-102589-7 — 80 4.380 [111.25] 3.900 [99.06] 5-102802-5 5-102589-1 6-534245-0 90 4.880 [123.95] 4.400 [111.76] 6-102802-0 6-102589-4 — 100 5.380 [136.65] 4.900 [124.46] 5-102802-6 5-102589-3 6-534245-1 120 6.380 [162.05] 5.900 [149.86] 5-102802-2 6-102589-1 5-534245-3 130 6.880 [174.75] 6.400 [162.56] 6-102802-9 6-102589-9 6-534245-3 Note:Headers with make first/break last posts can be made available, consult Tyco Electronics. Note:All part numbers are RoHS compliant. 200 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Headers, Straight Post, Triple-Row, .100 x .100 [2.54 x 2.54] Centerline Solder Posts Pos. Ref. (with Pin Protection .065 R [1.65] and Guide Pins) 1 2 3 (2 Plc.) .100 [2.54] .615 [15.62] .100 [2.54] .200 .085 [5.08] [2.16] B .040 [1.02] A Material and Finish (4 Sides) Housing — Glass-filled thermoplastic, .200 black, 94V-0 rated .210 [5.08] Posts — Phosphor bronze, plated as [5.33] (Localized follows: Gold Plate Area) Plating A — Duplex plated .000030 .090 [0.00076] gold on contact area, .440 [2.29] .000100-.000200 [0.00254-0.00508] [11.18] matte tin on termination end, with entire post underplated .000050 [0.00127] .320 [8.13] nickel Board Retention Tails .180 (where indicated) [4.57] Related Product Data P Mateable Receptacles — page 197 .0453±.001 rin .040±.003 [1.151±0.03] Cte PpTaeegcrefho 1nr9mi4caanl cDeo Scpuemceifnictast —ion psa —ge 276 (F[i1n.is6h6e±d0 .H08o]le) (Drilled Hole) [.52.0008] [.41.8507] onnectorsd Circuit B o a Product Specification rd 108-25017 .100±.003 .100 Application Specification [2.54±0.08] [2.54] .025 [0.64] Square 114-9009 Board Retention Tails 5 Recommended PC Board Hole Layout Additional header assembly sizes (for .055 [1.40] min. thick PC board) are available; minimum order quantities may apply. Consult Tolerances not to accumulate within one Tyco Electronics. connector pattern. Header Part Nos. with .180 [4.57] Tail Length No. of Dimensions Pos. A B Standard Board Solder Tails Retention Tails Plating A Plating A 72 2.780 [70.61] 2.300 [58.42] 5-103264-1 5-534258-1 96 3.480 [88.39] 3.000 [76.20] — 5-534258-3 150 5.380 [136.65] 4.900 [124.46] 5-103264-3 — 210 7.380 [187.45] 6.900 [175.26] 5-103264-4 — Note:All part numbers are RoHS compliant. 201 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Headers, VRM (Voltage Regulator Module), .100 x .100 [2.54 x 2.54] Centerline Solder Posts and A ACTION PIN Posts (with B Pin Protection, Guide Ribs, and Latching) .515 Material and Finish [13.08] Housing — Glass-filled thermoplastic, black, 94V-0 rated Posts — Copper alloy, duplex plated .110 .000030 [0.00076] gold on contact area, [2.79] .120 [3.05] .000100-.000200 [0.00254-0.00508] .320 matte tin on termination end, with entire [8.13] post underplated .000050 [0.00127] nickel .440 [11.18] Related Product Data Mateable Receptacles — pages 195, 196 Performance Specifications — Housing Outline page 194 B ACTION PIN Posts — d page 150, 151 .100 ar [2.54] o Application Tooling — d Circuit Bonnectors pages 152 [.31.2158] .100 .040 +.003 [.72.9307] PrinteC Technical Documents — page 276 [2.54] [1.02 +.08] [1.532.353] Product Specification Recommended PC Board Hole Layout 108-25017 5 Application Specification 114-9009 No Dimensions Header Part No. of Pos A B Standard Solder Tails .250 Length ACTION PINTails 30 2.450 [62.23] 1.400 [35.56] 5-146205-1 — 3.095 [78.62] 1.900 [48.26] — 5-147254-1 40 3.100 [78.74] 1.900 [48.26] 5-146315-1 — Note:All part numbers are RoHS compliant. 202 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Accessories: End Shrouds for Machine-Applied Posts Mating Polarized Single-Row, .100 [2.54] Centers Housing Part No. 102338-1 Material— Black thermoplastic, flame retardant .066 [1.68] .164 [4.17] End .290 Shroud [7.37] .050 [1.27] .712 [18.08] .059 [1.50] .350 Board Mounted PC Board Max. [8.89] Straight Posts Typical Assembly Break Line for 7 Pos. .066 or Larger Header [1.68] .029 Technical Documents — page 276 [0.74] Dia. P rin Cte od nnectors Circuit B o a rd Double-Row, .100 x .100 [2.54 x 2.54] Centers Part No. 102114-1 5 Material— Black glass-filled polyester .405 .280 [10.29] [7.11] .150 .050 [3.81] [1.27] .890 [22.61] .059 [1.50] Max. .350 [8.89] Break Line for 14 Pos. or Larger Header .029 .066 [0.74] [1.68] Dia. Note:All part numbers are RoHS compliant. 203 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Accessories: Barrier Insert, Part No. 87743-1 Material .446 .340 Black polyester [.00.3974] [11.33] [8.64] .090 [.00.3706] Technical Documents — page 276 [2.29] The barrier insert can be .031-.043 used on double row headers .314 .030 D[0i.a7. 9x- 1.2.0590][ (.100 x .100 [2.54 x 2.54] [7.98] .127 [0.76] [6.35] centers), including shrouded [3.23] Deep— versions—3 and 4 sides, remainder .100 .029±.001 as well as unshrouded [2.54] [0.74±0.03] straight post headers. With .087 Dia. [2.21] Thru Typ. (2) one barrier insert several configurations can be 45° .094 [2.39] obtained, providing headers .047 [1.19] with capabilities of accept- ing various combinations of polarized and non-polarized Barrier Insert Cutoffs AMPMODU connectors. For unshrouded headers, the barrier insert is used to establish polarization and to compartmentalize the header. For shrouded headers, the barrier insert is Fig. 1 Fig. 2 Fig. 3 Fig. 4 d used to compartmentalize Partial Cutoff Partial Cutoff Complete Cutoff Complete Cutoff d Circuit Boaronnectors tpifnhaosecle aihlirrtetia zaittaedst eeicolrfu,n itw.st iT hnnhigloee t o cmbfhfaa etrihdnriete at roining (Left and Right Sides) Co(mR(Lpieglfhet ttS eSi dCideue)t)off P(aR(Lritegiafhtl t S CSiduideteo))ff (Left and Right Sides) eC ends with a simple tool nt Pri such as tin snips or scissors to achieve the desired configuration. Typical Barrier Insert Applications 5 For Unshrouded Double-Row, Straight Post Headers, .100 x .100 [2.54 x 2.54] Centers See Fig. 3 See Fig. 4 See Fig. 1 See Fig. 2 Note:All configurations of barrier inserts compartmentalize headers and maintain polarization, except bar (Fig. 4) configuration, which is used primarily for compartmentalizing headers. For Shrouded Double-Row, 3 and 4 Sided Headers, .100 x .100 [2.54 x 2.54] Centers See Fig. 2 See Fig. 4 See Fig. 1 See Fig. 3 Note:Right-angle (Figs. 2 and 3) and “T” (Fig. 1) configurations of barrier insert establish polarization; bar (Fig. 4) configuration of barrier insert compartmentalizes header. Note:All part numbers are RoHS compliant. 204 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Accessories: Snap-In Polarizer for Low Profile Headers Material Black thermoplastic, flame retardant .134 Part Numbers [3.40] .335 499991-2(Packaged 50 per bag) [8.51] 499991-3(Packaged 1000 per bag) Break Line (See below.) Related Product Data Low Profile Headers used with — pages 135-140 Break Line .335 (See below.) [8.51] .134 [3.40] The snap-in polarizer provides military polarization for low profile headers. Installation of the polarizer is as follows: P rin Cte od nnectors Circuit B o a rd Orient the polarizer so that the 5 polarizer latch is on the same side as the inner wall (post side) of the header housing. Slide the polarizer over the Break Line polarizing slot of the housing until the latch engages the hole. Snap off the tab at the break line next to the housing. Using the remaining polarizer, repeat the process for the other housing location. Note:For Post Shunts, contact TycoElectronics. Note:All part numbers are RoHS compliant. 205 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Locking Clip Contacts and Housings Product Facts ■ Self-retaining contacts provide permanent connection with quick connect and disconnect ■ Fast, easy installation with no additional locking hardware required ■ Mates with .025 [0.64] square posts in a variety of configurations ■ Single- and double-row configurations in up to 20 positions on .100 [2.54] centers ■ Modular design permits end-to-end stacking (double- row only) for circuit grouping ■ Choice of tin or select gold plating ■ Housings made of 94V-0 s g rated glass-filled polyester n si g Clipd Hou ■ RCoemcopgonnizeendt Purnodgerra tmhe Lockinontacts an oLFfai lbUeo nNrdaoet.or wEri2rei8st4e I7rns6c., R Typical Application C ■ Certified by Canadian Standards Single 5 Association, R Contact File No. LR 7189 (Page 207) Both Ends Closed Performance Single Row (for specified Left End Characteristics Both Ends no. of circuits— Open (for Closed housing size) stacking to Contact Current Rating — (Page 208) (Page 209) left side) 3 amperes (Page 209) Termination Resistance — 12 milliohms (max.)— Gold plated Right End contacts Open (for stacking to 16 milliohms (max.)— Tin plated right side) contacts (Page 209) PC Board Durability — Ref. Product Specification 108-36028 and 108-36028-1 .100 x .100 [2.54 x 2.54] .200/.277* [5.08/7.04] (without Extraction housing Tool Slot Contact Clearance Hole .025 .273/.350* [0.64] [6.93/8.89] Sq. Posts (with housing) *If post is longer than maximum specified, post tip may butt against wire ends. Dimension defines .025 x .025 [0.64 x 0.64] portion of post. 206 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Locking Clip Contacts Wire Crimp Contacts with Insulation Support Body Material and Finish Contact Spring — Stainless steel Pating A — Selectively plated Spring .000050 [0.00127] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact A Pating B — Selectively plated .000030 [0.00076] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact Pating C — .000100-.000200 [0.00254-0.00508] bright tinover .000050 [0.00127] nickel on entire contact AWGWRiraen Sgieze[mm2] RDIannisag..e DimeAnsion Finish Strip FoPrmart Nos.Loose Piece HeAaMAvypPM pD-Oaluicc-tLhayEt iMnoCeriT n*foRiarItCure HTNaoono.dl Plating B 87190-1 87191-1 30-28 0.05-0.09 .029-.039[0.74-0.99] .550 [13.97] 567310-2 90295-1 Plating C 5-87190-2 5-87191-2 Plating A 87124-3 87165-3 26-22 0.12-0.4 .038-.062 [0.97-1.57] .584 [14.83] Plating B 87124-1 87165-1 466721-2 91533-1 C o Plating C 5-87124-2 5-87165-2 n 20 0.5-0.6 .038-.062 [0.97-1.57] .584 [14.83] PPllaattiinngg CB 5-886677005522--21 —— 679996-2 90431-1 tacts anLockin *For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the d Hg C AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. oulip Notes: 1. These contacts must be crimped in accordance with Tyco Electronics Specification No. 114-25006in order to function properly in a connector housing. s 2. Extraction Tool No. 91084-1is used for removing individual contacts from connector housings and for detaching contacts from mating posts. ing s 5 Related Product Data Housings Used With — pages 208, 209 Application Tooling — page 272 Technical Documents — Wire Harnessing pages 277, 278 Fixed If necessary, wires can be Clamp Product Specification grouped with cable ties and 108-36028, 108-36028-1 secured to a panel with Application Specification fixed clamps. However, 114-25006 locking clip contacts must Unrestricted Wires for be free to float within the Free-Floating connector housings to Contacts allow proper extraction. Therefore, harnessing Cable hardware or the use of Tie multiple terminations per contact must not restrict the free-floating action of contacts in the housing. For more information request Insulation and Bundling Products Catalog 124132. Extraction Tool No. 91084-1 Note:All part numbers are RoHS compliant. 207 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Wire-Applied Housings for Locking Clip Contacts, Single-Row, .100 [2.54] Centerline Single-Row .060 [1.52] .700 [17.78] .350 .273 (Post [8.89]Length) 6.93 Material Glass-filled polyester, 94V-0 rated .025[0.64] .145 Sq. Post [3.68] (Shown for Ref. only) Related Product Data A Contacts — page 207 .175 C Mateable Headers and Posts — Typ. [4.44] Refer to the Mating Post Selection .085 [2.16] Guide — page 90 Technical Documents — .100 Typ. [2.54] pages 277, 278 B s g Product Specification n Note: Housing illustrated above is the “Both Ends Closed” version. si 108-36028, 108-36028-1 pu CliHo Application Specification g d 114-25006 nn Lockiacts a .21 2a5n d[3 3.1 p8o] scietinotne rhlionues sininggsl ea-rreow, nt available, Base Part No. 104905. o C They are designed to be stackable end-to-end and side-by-side. Consult Tyco Electronics. 5 No. of Dimensions Housing Part No. Pos. A B C Unstamped Stamped 1 .108[2.74] — .054[1.37] 87175-2 — 2 .216[5.49] .100[2.54] .058[1.47] 87175-6 — 3 .316[8.03] .200[5.08] .058[1.47] 87175-8 — 4 .416[10.57] .300[7.62] .058[1.47] 1-87175-0 — 5 .516[13.11] .400[10.16] .058[1.47] 1-87175-2 — 6 .616[15.65] .500[12.70] .058[1.47] 1-87175-4 1-87175-3 7 .716[18.19] .600[15.24] .058[1.47] 1-87175-6 1-87175-5 8 .816[20.73] .700[17.78] .058[1.47] 1-87175-8 1-87175-7 Keying Plug 9 .916[23.27] .800[20.32] .058[1.47] 2-87175-0 1-87175-9 10 1.016[25.81] .900[22.86] .058[1.47] 2-87175-2 2-87175-1 11 1.116[28.35] 1.000[25.40] .058[1.47] 2-87175-4 2-87175-3 12 1.216[30.89] 1.100[27.94] .058[1.47] 2-87175-6 2-87175-5 13 1.316[33.43] 1.200[30.48] .058[1.47] 2-87175-8 2-87175-7 14 1.416[35.97] 1.300[33.02] .058[1.47] 3-87175-0 2-87175-9 15 1.516[38.51] 1.400[35.56] .058[1.47] 87175-4 87175-3 Part No. 87179-1 (Plugs directly into housings for .025 [0.64] square post contacts) Material — Yellow, nylon Note:All part numbers are RoHS compliant. 208 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Wire-Applied Housings for Locking Clip Contacts, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Double-Row .300 [7.62] .700 [17.78] .350 Max. [8.89] (Post Length) Material Glass-filled polyester, 94V-0 rated .025[0.64] Sq. Post .270 (Shown for A Related Product Data [6.86] Ref. only) .100 Typ. .100 [2.54] Contacts — page 207 [2.54] Mateable Headers and Posts — Refer to the Mating Post Selection Guide — page 90 Technical Documents — .058 B pages 277, 278 [1.47] C o Note: Housing illustrated above is the “Both Ends Closed” version. n P10r8o-d3u6c0t2 S8,p 1e0c8if-i3c6a0t2io8n-1 tactsLoc Application Specification ankin dg 114-25006 H C oulip s in g s Both Ends Closed 5 Key Keyway Right End Open Left End Open Housing No. of Dimensions Housing Part No. Configuration Pos. A B Unstamped Stamped 2 .116[2.95] — 87176-2 — 4 .216[5.49] .100[2.54] 87133-1 — Keying Plug 6 .316[8.03] .200[5.08] 87133-7 87133-8 8 .416[10.57] .300[7.62] 87133-9 1-87133-0 Both Ends Closed 10 .516[13.11] .400[10.16] 87133-2 87133-5 12 .616[15.65] .500[12.70] 1-87133-1 1-87133-2 16 .816[20.73] .700[17.78] 1-87133-3 1-87133-4 18 .916[23.27] .800[20.32] 1-87133-5 1-87133-6 20 1.016[25.81] .900[22.86] 87133-3 87133-6 4 .216[5.49] .100[2.54] 87132-1 — Right End Open 10 .516[13.11] .400[10.16] 87132-2 87132-5 20 1.016[25.81] .900[22.86] 87132-3 87132-6 4 .216[5.49] .100[2.54] 87131-1 — Part No. 87179-1 Left End Open 10 .516[13.11] .400[10.16] 87131-2 87131-5 (Plugs directly into housings for .025 [0.64] square post contacts) 20 1.016[25.81] .900[22.86] 87131-3 87131-6 Material — Yellow, nylon Note:All part numbers are RoHS compliant. 209 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Contacts and Housings Product Facts ■ Terminates 32-20 AWG [0.03-0.6mm2] discrete wire ■ Contacts have insulation support ■ Choice of three contact mating pressures ■ Available in a variety of gold and tin platings ■ Receptacles mate with .025 [0.64] square or round posts ■ Dual cantilever contact beam with built-in anti-overstress feature for reliable matings ■ Housings accept a variety of receptacle and pin contacts ■ Housing sizes range up to 100 positions ■ Housing configurations include single- and double- d gs rows on .100 [2.54] en Wire-Appliand Housi ■ cHdeeontuetsenirtnl ligan otecpshtiinogn,s pinoclaluridzeation od IV ntacts apnudll btaobnsded strain relief/ 16--8877673516--56 DSt-dR. PHroeusssiunrge, CPoolnatraizcetsd with Detent Wire-to-Board Mo C ■ Recognized under the Component Program of 102387-1 D-R Ejection Housing, 16--8877475566--56 DSt-dR. PHroeusssiunrge, CPloanintacts Center Polarized 5 Underwriters 6-87756-6 Std. Pressure Contacts 87483-3 D-R Housing with Mounting Ears Laboratories Inc., 6-87756-6 Std. Pressure Contacts File No. E28476 R 102241-8 S-R Housing Polarized with 1825851-1 Latch ■ Certified by Canadian Detent 102128-1 High Pressure Contacts Standards 5102154-1 Hdr Association, File No. LR 7189 R 103168-8 5-103166-8 Hdr Hdr 3-87977-5 D-R Housing, Polarized 1-87756-6 Std. Pressure Plain 6-87756-6 Std. Pressure Contacts 6-87456-6 D-R Housing, Contacts 1-87232-0 Hdr 5-103166-8 Hdr Performance Characteristics 1-87499-8 S-R Housing, Plain 102128-1 High Pressure Contacts 5-102202-7 Hdr Contact Current Rating — 3 amperes Termination Resistance — 12 milliohms (max.) — Beryllium copper contacts 20 milliohms (max.) — Copper-tin- phosphor bronze contacts Durability — Ref. Product Specification 108-25020 Note:All part numbers are RoHS compliant. 210 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Pin and Receptacle Contacts Crimp Snap-In (No-strip) Receptacles and Crimp .058 [1.47] Snap-In Pins with No-Strip Pin with Insulation Support Receptacle .815 Insulation Support (Standard Pressure) .165 .470 [20.70] [4.19] [11.94] .016 [0.41] Gap Max. .068 [1.73] Crimp Snap-In (No-strip) Receptacles Ins. Part Nos. HeaAvyp pDliuctayt oMri nNioa.ture Hand Dia. Finish for AMP-O-LECTRIC Tool Range Strip Form Loose Piece Part No. Machine* Plating A 87107-5 102348-2 .040-.055 [1.02-1.40] 567307-2 90381-1 Plating C 87107-6 102348-3 Standard Pressure Configuration Material and Finish Crimp Snap-In Pins with Insulation Support Beryllium copper, phosphor bronze, or M ccPohlaparpttiesnr)-g, tp iAnla- t—pehdo Sassep lhfeooclrtli ovbwerlosyn: pzela (tesdee .000030 AWGRWSainizrge[emem2] (MDInaisax...) Finish Strip ForPmart NLoos.ose Piece Hfoera AvAypMM pDPlaiu-ccOtahy-t iLoMnErei CnN*iToaR.tuICrePremiumPaHTraotC noNodlom.mercial od IV Con [0.00076] gold on contact area, with gold Plating A 102095-3 102107-2 tac flash over .000050 [0.00127] nickel on 26-22 0.12-0.4 [.10.6515 ] Plating B 102095-2 102107-1 466812-2 91517-1 58641-1† ts entire contact Plating C 5-102095-4 5-102107-3 Plating B — Selectively plated .000015 *For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. [0.00038] gold on contact area, with gold of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench flash over .000050 [0.00127] nickel on machines and fully automatic AMPOMATOR lead making machines. 5 entire contact †PRO-CRIMPER II hand tool frame with die set assembly. Plating C — .000100-.000200 Die Set Part No. 58641-2 [0.00254-0.00508] tin over .000030 [0.00076] nickel on entire contact Related Product Data Housings Used With — pages 214-220 Performance Characteristics — page 210 Application Tooling — page 270-272 Technical Documents — pages 276-278 Product Specification 108-25007, 108-25019, 108-25020, 108-25021 Application Specification 114-25003, 114-25016 Additional header sizes are available; minimum order quantities may apply. Consult Tyco Electronics. Note:All part numbers are RoHS compliant. 211 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Receptacle Contacts Crimp Snap-In Receptacles with Insulation Support Standard Pressure (Standard, Intermediate A and High Pressure) .058 Material and Finish [1.47] Beryllium copper, phosphor bronze or copper-tin-phosphor bronze (see charts, on following page), plated as follows: .165 A [4.19] Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100- .068 .000200 [0.00254-0.00508] tin on crimp [1.73] area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on crimp Intermediate Pressure area, with entire contact underplated A .000050 [0.00127] nickel Plating D — Selectively plated .000050 [0.00127] gold on contact area, with gold flash over .000050 [0.00127] nickel on entire contact Plating E — Selectively plated .000030 [0.00076] gold on contact area, with gold s flash over .000050 [0.00127] nickel on ct entire contact a nt Plating F — Selectively plated .000015 o V C [0.00038] gold on contact area, with gold d I flash over .000050 [0.00127] nickel on o entire contact M Plating G — .000100-.000200 [0.00254-0.00508] tin over .000030 [0.00076] nickel on entire contact High Pressure 5 Related Product Data A Housings Used With — pages 214-220 Performance Characteristics — page 210 Application Tooling — pages 270-272 Technical Documents — pages 277, 278 Product Specification 108-25007, 108-25019, 108-25020, 108-25021 Application Specification 114-25003, 114-25016 Mating Force Unmating Force A-Gap Dimension Standard Pressure 9 oz. Max. 1.5 oz. Min. .008/.014 Intermediate Pressure 16 oz. Max. 2 oz. Min. .008/.014 High Pressure 20 oz. Max. 3 oz. Min. .013±.002 212 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Receptacle Contacts (Continued) Standard Pressure (Mod IV) Wire Heavy Duty Miniature Applicator for Hand Size Ins. Dimension Part Nos. Applicator for Stripper/ Tool Range (MDaiax..) A Material Finish Strip Form Loose Piece AMP-O-LECTRIC Crimper Part Nos. AWG [mm2] Machine* Machine Premium Commercial Cu-Sn-Ph Bz Plating A 5-102316-8 6-102316-4 Cu-Sn-Ph Bz Plating B 5-102316-6 6-102316-3 Be Cu Plating D 1-102917-1 1-102917-2 32-270.03-0.1 .040[1.02] .445 [11.30] 466655-2 466921-1 91541-1 — Be Cu Plating E 102917-1 102917-2 Be Cu Plating F 102917-5 102917-6 Cu-Sn-Ph Bz Plating G 102316-5 1-102316-2 Cu-Sn-Ph Bz Plating A 6-87756-7 6-87756-8 Cu-Sn-Ph Bz Plating B 6-87756-2 6-87756-6 Cu-Sn-Ph Br Plating G 87756-6 87756-7 26-220.12-0.4 .061 [1.55] .445 [11.30] Be Cu Plating D 1-87666-6 87667-5 466571-2 466918-1 91517-1 58641-1† Be Cu Plating E 87666-2 87667-2 Be Cu Plating F 87666-5 87667-5 Be Cu Plating G 87666-3 87667-3 Cu-Sn-Ph Bz Plating A 6-87523-8 6-87523-9 Cu-Sn-Ph Bz Plating B 2-87523-3 2-87523-4 Be Cu Plating E 85969-8 86016-2 24-20 0.2-0.6 .069 [1.75] .470 [11.94] 466562-2 466905-1 91516-1 — Be Cu Plating F 85969-6 86016-5 Cu-Sn-Ph Br Plating G 87523-5 87523-6 Be Cu Plating G 85969-9 86016-3 Intermediate Pressure (Mod IV.v) M o d Wire Heavy Duty Miniature Applicator for Hand IV Size Ins. Dimension Part Nos. Applicator for Stripper/ Tool C AWRGang[mem2] (MDaiax..) A Material Finish Strip Form Loose Piece AMPM-Oac-LhEinCeT*RIC MCraicmhpineer PremiuPmart NoCso.mmercial ontac Cu-Sn-Ph Bz Plating A 5-102920-1 5-102920-2 ts 32-27 0.03-0.1 .040 [1.02] .445 [11.30] 466655-2 466921-1 91541-1 — Be Cu Plating E 102918-1 102918-2 Cu-Sn-Ph Bz Plating A 5-103171-4 5-103171-5 Cu-Sn-Ph Bz Plating B 5-103171-1 5-103171-2 26-22 0.12-0.4 .061 [1.55] .445 [11.30] Be Cu Plating E 102548-5 102548-6 466571-2 466918-1 91517-1 58641-1† 5 Be Cu Plating F 102548-1 102548-3 Cu-Sn-Ph Bz Plating A 2-87195-3 2-87195-6 Cu-Sn-Ph Bz Plating B 2-87195-4 2-87195-5 24-20 0.2-0.6 .069[1.75] .470 [11.94] Be Cu Plating E 86492-6 87046-3 466562-2 466905-1 91516-1 — Be Cu Plating F 86492-2 87046-1 Be Cu Plating G 86492-9 87046-4 High Pressure (Mod V)** RWSainizrgeee (MDInaisax...) DimeAnsion Material Finish Part Nos. HeAaMAvypP pD-Oluic-tLayEt MoCriT nfoRiarItCure SAtArMipppPpl-eiOcra/-CMtorAirm TfoIpCrer PaHTrtao Nnodlos. AWG [mm2] Strip Form Loose Piece Machine* Machine 32-27 0.03-0.1 .040 [1.02] .445 [11.30] Ph Bz Plating E 103455-1 103455-2 466655-2 466921-1 91541-1 Ph Bz Plating E 87809-1 102128-1 26-22 0.12-0.4 .061 [1.55] .445 [11.30] 466571-2 466918-1 91517-1 Ph Bz Plating G 87809-2 102128-2 Ph Bz Plating E 87309-9 1-87309-4 24-20 0.2-0.6 .069 [1.75] .470 [11.94] 466562-2 466905-1 91516-1 Ph Bz Plating G 87309-8 1-87309-3 **For use with AMP-O-LECTRIC Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. **Contact material is phosphor bronze. †PRO-CRIMPER II hand tool frame with die set assembly. Die Set Part No. 58641-2 Note:All part numbers are RoHS compliant. 213 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline Non-Polarized .600 [15.24] .175 Material [4.45] A Black thermoplastic, flame retardant Max. .050 [1.27] B ±.003 C ±.003 [±0.08] [±0.08] Typ. Related Product Data .070 .100 .072 [1.78] [2.54]Typ. .140 [1.83] Contacts — pages 211-213 Typ. [3.56] X Mateable Headers and Posts — pages 93-95, 101-103 X Section X-X Technical Documents — pages 277, 278 No. of Dimensions Part No. Product Specification Pos. A B C Stamped* Unstamped** s 108-25007, 108-25019, 108-25020, 1 .105[2.67] — — — 7-87499-2 g n 108-25021 2 .205[5.21] .100[2.54] — 87499-3 87499-4 si u Application Specification 3 .305[7.75] .100[2.54] .100[2.54] 87499-5 87499-6 o d H 114-25003, 114-25016 4 .405[10.29] .200[5.08] .100[2.54] 87499-7 87499-8 pplie 56 ..560055[[1125..8337]] ..230000[[57..0682]] ..220000[[55..0088]] 1-8877449999--91 11--8877449999--02 A e- 7 .705[17.91] .300[7.62] .300[7.62] 87499-1 87499-2 Wir 8 .805[20.45] .400[10.16] .300[7.62] 1-87499-3 1-87499-4 V 9 .905[22.99] .400[10.16] .400[10.16] 1-87499-5 1-87499-6 od I 10 1.005[25.53] .500[12.70] .400[10.16] 1-87499-7 1-87499-8 M 11 1.105[28.01] .500[12.70] .500[12.70] 1-87499-9 2-87499-0 5 12 1.205[30.61] .600[15.24] .500[12.70] 2-87499-1 2-87499-2 13 1.305[33.15] .600[15.24] .600[15.24] 2-87499-3 2-87499-4 14 1.405[35.69] .700[17.78] .600[15.24] 2-87499-5 2-87499-6 15 1.505[38.23] .700[17.78] .700[17.78] 2-87499-7 2-87499-8 16 1.605[40.77] .800[20.32] .700[17.78] 2-87499-9 3-87499-0 17 1.700[43.18] .800[20.32] .800[20.32] — 3-87499-2 Keying Plugs 18 1.805[45.85] .900[22.86] .800[20.32] — 3-87499-4 19 1.900[48.26] .900[22.86] .900[22.86] — 3-87499-6 20 2.005[50.93] 1.000[25.40] .900[22.86] 3-87499-7 3-87499-8 21 2.100[53.34] 1.000[25.40] 1.000[25.40] — 4-87499-0 22 2.205[56.01] 1.100[27.94] 1.000[25.40] — 4-87499-2 23 2.300[58.42] 1.100[27.94] 1.100[27.94] — 4-87499-4 24 2.400[60.96] 1.200[30.48] 1.100[27.94] — 4-87499-6 Part No. 86286-1 25 2.500[63.50] 1.200[30.48] 1.200[30.48] — 4-87499-8 (Plugs into standard or intermediate 26 2.605[66.17] 1.300[33.02] 1.200[30.48] — 5-87499-0 pressure receptacle contact) 27 2.700[68.58] 1.300[33.02] 1.300[33.02] — 5-87499-2 28 2.800[71.12] 1.400[35.56] 1.300[33.02] — 5-87499-4 Material — Natural color nylon 29 2.900[73.66] 1.400[35.56] 1.400[35.56] — 5-87499-6 30 3.005[76.33] 1.500[38.10] 1.400[35.56] — 5-87499-8 31 3.100[78.74] 1.500[38.10] 1.500[38.10] — 6-87499-0 32 3.200[81.28] 1.600[40.64] 1.500[38.10] — 6-87499-2 33 3.300[83.82] 1.600[40.64] 1.600[40.64] — 6-87499-4 34 3.400[86.36] 1.700[43.18] 1.600[40.64] — 6-87499-6 35 3.500[88.98] 1.700[43.18] 1.700[43.18] — 6-87499-8 36 3.600[91.44] 1.800[45.72] 1.700[43.18] — 7-87499-0 **Cavity identification, part number and date code stamped on housing where size permits. **No marking on housing. Notes: 1. Strain reliefs are available and may be purchased separately. Consult Tyco Electronics. Part No. 87077-2 Notes: 2. Contact Extraction/Lance Reset Tool No. 843996-3. (Plugs directly into housing) Note:All part numbers are RoHS compliant. 214 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Single-Row, .100 [2.54] Centerline (Continued) Polarized (with Recessed Area Detent Latching) .175 [4.45] A Material Black thermoplastic, flame retardant .050Typ. [1.27] .071 B[±±.00.0038] C[±±.00.0038] .600 [.10.7823] Related Product Data [1.80] X [15.24] Contacts — pages 211-213 .182 [4.62] Mateable Headers and Posts — X pages 115, 116 .056 .100 [.21.0504] .127 Section X-X Flexible Film Connectors, [1.42] [2.54] Typ. [3.23] Single-Row Pin Assemblies — Typ. Catalog 82007 M No. of Dimensions Part Nos. o Technical Documents — Pos. A B C Unstamped* d IV pages 277, 278 3 .300[7.62] .100[2.54] .100[2.54] 102241-1 W Product Specification 45 ..450000[[1102..1760]] ..220000[[55..0088]] ..120000[[25..5048]] 110022224411--23 ire-A 108-25007, 108-25019, 108-25020, p 108-25021 67 ..670000[[1157..2748]] ..330000[[77..6622]] ..230000[[57..0682]] 110022224411--45 plied A11p4p-l2i5c0a0ti3o, n1 1S4p-e25c0if1i6cation 8 .800[20.32] .400[10.16] .300[7.62] 102241-6 Hou 9 .900[22.86] .400[10.16] .400[10.16] 102241-7 s in 10 1.000[25.40] .500[12.70] .400[10.16] 102241-8 g s 11 1.100[27.94] .500[12.70] .500[12.70] 102241-9 5 12 1.200[30.48] .600[15.24] .500[12.70] 1-102241-0 13 1.300[33.02] .600[15.24] .600[15.24] 1-102241-1 14 1.400[35.56] .700[17.78] .600[15.24] 1-102241-2 15 1.500[38.10] .700[17.78] .700[17.78] 1-102241-3 16 1.600[40.64] .800[20.32] .700[17.78] 1-102241-4 Keying Plugs 17 1.700[43.18] .800[20.32] .800[20.32] 1-102241-5 18 1.800[45.72] .900[22.86] .800[20.32] 1-102241-6 19 1.900[48.26] .900[22.86] .900[22.86] 1-102241-7 20 2.000[50.80] 1.000[25.40] .900[22.86] 1-102241-8 21 2.100[53.34] 1.000[25.40] 1.000[25.40] 1-102241-9 22 2.200[55.88] 1.100[27.94] 1.000[25.40] 2-102241-0 23 2.300[58.42] 1.100[27.94] 1.100[27.94] 2-102241-1 24 2.400[60.96] 1.200[30.48] 1.100[27.94] 2-102241-2 Part No. 86286-1 (Plugs into standard or intermediate 25 2.500[63.50] 1.200[30.48] 1.200[30.48] 2-102241-3 pressure receptacle contact) 26 2.600[66.04] 1.300[33.02] 1.200[30.48] 2-102241-4 27 2.700[68.58] 1.300[33.02] 1.300[33.02] 2-102241-5 Material — Natural color nylon 28 2.800[71.12] 1.400[35.56] 1.300[33.02] 2-102241-6 29 2.900[73.66] 1.400[35.56] 1.400[35.56] 2-102241-7 30 3.000[76.20] 1.500[38.10] 1.400[35.56] 2-102241-8 31 3.100[78.74] 1.500[38.10] 1.500[38.10] 2-102241-9 32 3.200[81.28] 1.600[40.64] 1.500[38.10] 3-102241-0 33 3.300[83.82] 1.600[40.64] 1.600[40.64] 3-102241-1 34 3.400[86.36] 1.700[43.18] 1.600[40.64] 3-102242-2 35 3.500[88.90] 1.700[43.18] 1.700[43.18] 3-102241-3 36 3.600[91.44] 1.800[45.72] 1.700[43.18] 3-102241-4 *No marking on housing. Note: Contact Extraction/Lance Reset Tool No. 843996-3. Part No. 87077-2 (Plugs directly into housing) Note:All part numbers are RoHS compliant. 215 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Double-Row, .100 x .100 [2.54 x 2.54] Centerline Non-Polarized .175 [4.45] A .100 Typ. .050 [2.54] Material [1.27] B .240 R Black thermoplastic, flame retardant Typ. X [6.10] .100 C Optional [2.54] Related Product Data Contacts — pages 211-213 X Section X-X .072 Mateable Headers and Posts — .070 [1.83] [1.78] pages 96-99, 104, 105, 117-120 No. Part Nos. s Technical Documents — of Dimensions C = .600 [15.24] C = .645 [16.38] ng pages 277, 278 Pos. A B Stamped* Unstamped** Unstamped** si ou Product Specification 2 .100[2.54] — — 5-87456-3 — d H 108-25007, 108-25019, 108-25020, 4 .200[5.08] .100[2.54] 5-87456-0 4-87456-9 2-86177-5 pplie 1A0p8p-l2i5c0a2ti1on Specification 68 ..340000[[71.06.21]6] ..230000[[57..0682]] 8877445566--24 8877445566--13 12--8866117777--80 A e- 114-25003, 114-25016 10 .500[12.70] .400[10.16] 87456-6 87456-5 1-86177-2 Wir 12 .600[15.24] .500[12.70] 87456-8 87456-7 1-86177-3 V 14 .700[17.78] .600[15.24] 1-87456-0 87456-9 1-86177-4 od I 16 .800[20.32] .700[17.78] 1-87456-2 1-87456-1 1-86177-5 M 18 .900[22.86] .800[20.32] 1-87456-4 1-87456-3 1-86177-6 5 20 1.000[25.40] .900[22.86] 1-87456-6 1-87456-5 86177-1 22 1.100[27.94] 1.000[25.40] — 1-87456-7 86177-2 24 1.200[30.48] 1.100[27.94] 2-87456-0 1-87456-9 86177-3 Keying Plugs 26 1.300[33.02] 1.200[30.48] 2-87456-2 2-87456-1 86177-4 28 1.400[35.56] 1.300[33.02] 2-87456-4 2-87456-3 86177-5 30 1.500[38.10] 1.400[35.56] 2-87456-6 2-87456-5 86177-6 32 1.600[40.64] 1.500[38.10] 2-87456-8 2-87456-7 86177-7 34 1.700[43.18] 1.600[40.64] 3-87456-0 2-87456-9 86177-8 36 1.800[45.72] 1.700[43.18] 3-87456-2 3-87456-1 86177-9 38 1.900[48.26] 1.800[45.72] — 3-87456-3 1-86177-0 40 2.000[50.80] 1.900[48.26] 3-87456-6 3-87456-5 1-86177-1 Part No. 86286-1 42 2.100[53.34] 2.000[50.80] 4-87456-4 4-87456-3 — (Plugs into standard or intermediate 44 2.200[55.88] 2.100[53.34] 3-87456-8 3-87456-7 1-86177-7 pressure receptacle contact) 48 2.400[60.96] 2.300[58.42] 6-87456-0 5-87456-9 2-86177-3 Material — Natural color nylon 50 2.500[63.50] 2.400[60.96] 4-87456-0 3-87456-9 2-86177-1 52 2.600[66.04] 2.500[63.50] 4-87456-2 4-87456-1 1-86177-9 54 2.700[68.58] 2.600[66.04] — 4-87456-5 — 56 2.800[71.12] 2.700[68.58] — 6-87456-1 — 58 2.900[73.66] 2.800[71.12] — 6-87456-3 — 60 3.000[76.20] 2.900[73.66] 5-87456-2 5-87456-1 — 64 3.200[81.28] 3.100[78.74] 6-87456-6 6-87456-5 — 66 3.300[83.82] 3.200[81.28] 5-87456-4 5-87456-7 — 70 3.500[88.90] 3.400[86.36] — 5-87456-5 2-86177-4 72 3.600[91.44] 3.500[88.90] 4-87456-8 4-87456-7 — **Cavity identification, part number and date code stamped on housing where size permits. Part No. 87077-1 **No marking on housing. (for .645 high housings) Notes: 1.Strain reliefs are available and may be purchased separately. Consult Tyco Electronics. Part No. 87077-2 Notes:2. Contact Extraction/Lance Reset Tool No. 843996-3. (for .600 high housings) (Plugs directly into housing) Note:All part numbers are RoHS compliant. 216 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Polarized Strain Relief Locators (on Housings 20 Positions and Larger) .175 [4.45] Material Black thermoplastic, flame retardant A .050 RCoenltaatcetds —Pr opadguecs t2 1D1a-2ta13 B[±±[.2.0T10.y.0500p0438.]] [.2T1.y05p04.C][±±.00.0038X] [1T.y2p7.].070Typ. [1.650.204] OptRional Mateable Headers and Posts— [1.78] pages 117-131 .240 [6.10] Technical Documents — .100 pages 277, 278 [2.54] M X Section X-X od Product Specification IV 108-25007, 108-25019, 108-25020, No. of Dimensions Part Nos. W 108-25021 Pos. A B C Stamped* Unstamped** ire Application Specification 6 .300[7.62] .100[2.54] .100[2.54] 87977-1 2-87977-8 -Ap 114-25003, 114-25016 8 .400[10.16] .200[5.08] .100[2.54] 87977-2 2-87977-9 plie 10 .500[12.70] .200[5.08] .200[5.08] 87977-3 3-87977-0 d H 12 .600[15.24] .300[7.62] .200[5.08] 87977-4 3-87977-1 o u 14 .700[17.78] .300[7.62] .300[7.62] 87977-5 3-87977-2 sin 16 .800[20.32] .400[10.16] .300[7.62] 87977-6 3-87977-3 gs 18 .900[22.86] .400[10.16] .400[10.16] — 3-87977-4 5 20 1.000[25.40] .500[12.70] .400[10.16] 87977-8 3-87977-5 22 1.100[27.94] .500[12.70] .500[12.70] — 3-87977-6 24 1.200[30.48] .600[15.24] .500[12.70] 1-87977-0 3-87977-7 26 1.300[33.02] .600[15.24] .600[15.24] 1-87977-1 3-87977-8 28 1.400[35.56] .700[17.78] .600[15.24] — 3-87977-9 Keying Plugs 30 1.500[38.10] .700[17.78] .700[17.78] — 4-87977-0 32 1.600[40.64] .800[20.32] .700[17.78] — 4-87977-1 34 1.700[43.18] .800[20.32] .800[20.32] — 4-87977-2 36 1.800[45.72] .900[22.86] .800[20.32] — 4-87977-3 38 1.900[48.26] .900[22.86] .900[22.86] — 4-87977-4 40 2.000[50.80] 1.000[25.40] .900[22.86] 1-87977-8 4-87977-5 42 2.100[53.34] 1.000[25.40] 1.000[25.40] — 4-87977-6 Part No. 86286-1 44 2.200[55.88] 1.100[27.94] 1.000[25.40] — 4-87977-7 (Plugs into standard or intermediate 48 2.400[60.96] 1.200[30.48] 1.100[27.94] — 5-87977-6 pressure receptacle contact) 50 2.500[63.50] 1.200[30.48] 1.200[30.48] 2-87977-1 4-87977-8 52 2.600[66.04] 1.300[33.02] 1.200[30.48] — 4-87977-9 Material — Natural color nylon 54 2.700[68.58] 1.300[33.02] 1.300[33.02] — 5-87977-0 56 2.800[71.12] 1.400[35.56] 1.300[33.02] — 5-87977-8 58 2.900[73.66] 1.400[35.56] 1.400[35.56] — 6-87977-0 60 3.000[76.20] 1.500[38.10] 1.400[35.56] 2-87977-4 5-87977-1 64 3.200[81.28] 1.600[40.64] 1.500[38.10] — 6-87977-2 66 3.300[83.82] 1.600[40.64] 1.600[40.64] — 5-87977-2 70 3.500[88.90] 1.700[43.18] 1.700[43.18] — 5-87977-3 72 3.600[91.44] 1.800[45.72] 1.700[43.18] — 5-87977-4 **Cavity identification, part number and date code stamped on housing where size permits. **No marking on housing or strain relief. Notes: 1.Strain reliefs are available and may be purchased separately. Consult Tyco Electronics. Part No. 87077-2 Notes:2. Contact Extraction/Lance Reset Tool No. 843996-3. (Plugs directly into housing) Note:All part numbers are RoHS compliant. 217 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Polarized (with Detent Strain Relief Locators Latching, with and without (on Housings 20 Positions and Larger) Strain Relief/Pull Tab) .175 [4.45] A Material ±.003 ±.003 Black thermoplastic, flame retardant B[±0.08] C[±0.08] .100 Typ. .050 [2.54] [1.27] .100 Typ. Typ. .600 Related Product Data [2.54] X [15.24] Contacts — pages 211-213 Mateable Headers and Posts — .240 pages 117-125, 127-133 .070 [6.10] [1.78] s .100 Typ. ng [2.54] Housi Tpeagcehsn i2c7a7l, D2o7c8uments — .500 X 1S.0e0c0tion X-X OptRional ed Product Specification [12.70] [25.40] pli 108-25007, 108-25019, 108-25020, p A 108-25021 Wire- Application Specification [.20.9451] 1.150 [14.89.0206] V 114-25003, 114-25016 Dia. [29.21] .095 od I [2D.i4a1.] M 5 Housing with Housing with Strain Relief/Pull Tab Strain Relief/Pull Tab Keying Plugs Strain Relief Part No. 87921-1 Strain Relief Part No. 87710-1 (10 thru 18 positions) (20 positions and larger) Part No. 86286-1 Part Nos. (Plugs into standard or intermediate No. of Dimensions No. of Without Strain Relief With Strain Relief pressure receptacle contact) Pos. A B C Detents Stamped* Unstamped** Stamped* Material — Natural color nylon 6 .300[7.62] .100[2.54] .100[2.54] 1 87631-2 87631-1 — 8 .400[10.16] .200[5.08] .100[2.54] 1 87631-4 87631-3 — 10 .500[12.70] .200[5.08] .200[5.08] 1 87631-6 87631-5 87922-1 12 .600[15.24] .300[7.62] .200[5.08] 1 87631-8 87631-7 87922-2 14 .700[17.78] .300[7.62] .300[7.62] 1 1-87631-0 87631-9 87922-3 16 .800[20.32] .400[10.16] .300[7.62] 1 1-87631-2 1-87631-1 87922-4 **Cavity identification, part number and date code stamped on housing and/or strain relief where size permits. **No marking on housing or strain relief. Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing. Notes:2. Strain reliefs may be purchased separately. Notes:3. Contact Extraction/Lance Reset Tool No. 843996-3. Part No. 87077-2 (Plugs directly into housing) Note:All part numbers are RoHS compliant. 218 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Part Nos. No. of Dimensions No. of Without Strain Relief With Strain Relief Pos. A B C Detents Stamped* Unstamped** Stamped* 18 .900[22.86] .400[10.16] .400[10.16] 1 1-87631-4 1-87631-3 87922-5 20 1.000[25.40] .500[12.70] .400[10.16] 2 1-87631-6 1-87631-5 87733-1 22 1.100[27.94] .500[12.70] .500[12.70] 2 1-87631-8 1-87631-7 — 24 1.200[30.48] .600[15.24] .500[12.70] 2 2-87631-0 1-87631-9 87733-3 26 1.300[33.02] .600[15.24] .600[15.24] 2 2-87631-2 2-87631-1 87733-4 28 1.400[35.56] .700[17.78] .600[15.24] 2 2-87631-4 2-87631-3 — 30 1.500[38.10] .700[17.78] .700[17.78] 2 2-87631-6 2-87631-5 87733-6 32 1.600[40.64] .800[20.32] .700[17.78] 2 2-87631-8 2-87631-7 87733-7 34 1.700[43.18] .800[20.32] .800[20.32] 2 3-87631-0 2-87631-9 87733-8 36 1.800[45.72] .900[22.86] .800[20.32] 2 3-87631-2 3-87631-1 — 38 1.900[48.26] .900[22.86] .900[22.86] 2 — 3-87631-3 — 40 2.000[50.80] 1.000[25.40] .900[22.86] 2 3-87631-6 3-87631-5 1-87733-1 42 2.100[53.34] 1.000[25.40] 1.000[25.40] 2 3-87631-8 3-87631-7 — 44 2.200[55.88] 1.100[27.94] 1.000[25.40] 2 4-87631-0 3-87631-9 — 48 2.400[60.96] 1.200[30.48] 1.100[27.94] 2 — 5-87631-9 — 50 2.500[63.50] 1.200[30.48] 1.200[30.48] 2 4-87631-2 4-87631-1 1-87733-4 52 2.600[66.04] 1.300[33.02] 1.200[30.48] 2 — 4-87631-3 — 54 2.700[68.58] 1.300[33.02] 1.300[33.02] 2 4-87631-6 4-87631-5 — 58 2.900[73.66] 1.400[35.56] 1.400[35.56] 2 — 6-87631-3 — M 60 3.000[76.20] 1.500[38.10] 1.400[35.56] 2 5-87631-2 5-87631-1 1-87733-7 o d 64 3.200[81.28] 1.600[40.64] 1.500[38.10] 2 6-87631-6 6-87631-5 — IV 66 3.300[83.82] 1.600[40.64] 1.600[40.64] 2 — 5-87631-3 — W 70 3.500[88.90] 1.700[43.18] 1.700[43.18] 2 — 5-87631-5 — ire -A 72 3.800[96.52] 1.800[45.72] 1.700[43.18] 2 5-87631-8 5-87631-7 — p p **Cavity identification, part number and date code stamped on housing and/or strain relief where size permits. lie **No marking on housing or strain relief. d H Notes: 1. The Strain Relief/Pull Tab can be bonded to any thermoplastic connector housing. o u Notes:2. Strain reliefs may be purchased separately. s Notes:3. Contact Extraction/Lance Reset Tool No. 843996-3. ing s 5 Note:All part numbers are RoHS compliant. 219 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mod IV Wire-Applied Housings, Double-Row, .100 x .100 [2.54 x 2.54] Centerline (Continued) Center Polarized Position No. 1 Indicator .030 [0.76] .150† [3.81] .570 [14.88] .130 .130 [3.30] [3.30] B Material A Black thermoplastic, flame retardant Related Product Data Contacts — pages 211-213 [.31.2005] C .600 .072 Mateable Headers and Posts — [15.24] [1.83] X AMP-LATCH Low Profile Headers, .285 Shrouded — pages 135-140 [.52.2777] [7.24] ngs Technical Documents — [.21.0504] X ROptional usi pages 277, 278 Section X-X o d H Product Specification e 108-25007, 108-25019, 108-25020, pli 108-25021 p A Wire- A11p4p-l2i5c0a0ti3o, n1 1S4p-e25c0if1i6cation NPoo. so.f A DimenBsions C (SPtaarmt Npoeds.*) d IV 8 .580 [14.73] .225 [5.72] .300 [7.62] 1-102387-4 o 10 .680 [17.27] .275 [6.98] .400 [10.16] 102387-1 M 14 .880 [22.35] .375 [9.53] .600 [15.24] 102387-2 5 16 .980 [24.89] .425 [10.80] .700 [17.78] 102387-3 20 1.180 [29.97] .525 [13.34] .900 [22.86] 102387-4 22 1.280 [32.51] .575 [14.61] 1.000 [25.40] 1-102387-5 24 1.380 [35.05] .625 [15.88] 1.100 [27.94] 102387-5 26 1.480 [37.59] .675 [17.15] 1.200 [30.48] 102387-6 30 1.680 [42.67] .775 [19.69] 1.400 [35.56] 102387-7 34 1.880 [47.75] .875 [22.23] 1.600 [40.64] 102387-8 Keying Plugs 40 2.180 [55.37] 1.025 [26.04] 1.900 [48.26] 102387-9 44 2.380 [60.45] 1.125 [28.58] 2.100 [53.34] 1-102387-3 50 2.680 [68.07] 1.275 [32.39] 2.400 [60.96] 1-102387-0 60 3.180 [80.77] 1.525 [38.74] 2.900 [73.66] 1-102387-1 64 3.380 [85.85] 1.625 [41.28] 3.100 [78.74] 1-102387-2 *Cavity identification and TycoElectronics stamped on housing. †Non-functional slot is used for gating purposes during injection molding process. This gating feature is not inherent in all production molds. Therefore, the depicted slot will only be present on housings produced on mold tooling requiring Part No. 86286-1 this gating feature. (Plugs into standard or intermediate Note: Contact Extraction/Lance Reset Tool No. 843996-3. pressure receptacle contact) Material — Natural color nylon Part No. 87077-2 (Plugs directly into housing) Note:All part numbers are RoHS compliant. 220 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Short Point, Crimp Snap-In Wire-Applied Contacts and Housings Product Facts ■ Short point of contact mates with .169 [4.29] to .259 [6.58] long post ■ Double-row housings are end-to-end and side-to-side stackable ■ Terminates 32-20 AWG [0.03-0.6 mm2] discrete wire ■ Contacts have insulation support to accept a maximum insulation diameter of .060 [1.52] ■ Available with .000015 [0.00038] or .000030 [0.00076] gold duplex, or tin plating ■ Mates with .025 [0.64] square posts ■ Dual cantilever contact ASh beams for reliable matings pplieort P ■ Locking retention latch d Coin ■ p3fUor nlrobcivq ei[ud1ee3 s.lo3 ac4pk Npinr]og ox lfia mrtecathet endlteyi osingn 5-104450-3 MTE Hdr 1-110044245870--34 SMh1To-E8rt7 RP2oe3ic2ne-t0 pC tH.o Hdnrotaucsti ng Wire-to-Board ontacts and Ht, Crimp Snap helps prevent latch from ou-In protruding through latch sin W window gsire - ■ Contacts snap into 104482-9 Short Point Recept. Housing 5 AMPMODU MTE single-row 5-104481-6 Short Point Contact housings ■ Double-row housing configurations include 104257-5 MTE Recept. Housing 1-104480-5 Short Point Contact .100 [2.54] centerline, plain and polarized 103688-9 MTE Recept. Housing 1-104479-1 Short Point Contact ■ Housing sizes range from 4 to 52 positions ■ Recognized under the AMPMODU Short Point Performance Component Program receptacle contacts are Characteristics of Underwriters designed to mate with .025 Laboratories Inc., R [0.64] squareposts. They Contact Current Rating — 3 amperes File No. E28476 will mate with posts as short Termination Resistance — as .169 [4.29]. ■ Certified by 12 milliohms (max.) Canadian Standards R Short Point double-row Durability — Ref. Product Association, housings are end-to-end Specification 108-1472 File No. LR7189 and side-to-side stackable on .100 [2.54] centers. ■ Produced under a Quality Contacts also can be used Management System in single-row AMPMODU certified to ISO 9A 0co0p1y of the IS OC9er0tif0ie1d Masy TcsEotem hmpo,ul eostrei nt ogw ssir eetor-vc perir moavspide certificate is available replacement contacts. upon request Note:All part numbers are RoHS compliant. 221 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Short Point Crimp Snap-In Receptacle Contacts Material and Finish .068 Copper alloy C7025, plated as follows: [1.73] Plating A — Duplex plated .000030 [0.00076] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating B — Duplex plated .000015 [0.00038] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating C — .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on entire contact .060 .460 [1.52] [11.68] Related Product Data Performance Characteristics — page 221 Housings used in — C C Short Point—pages 223, 224 AMPMODU MTE Unloaded Housings — pages 228-233 Application Tooling — page 270-272 s ct onta [.00.1320] C Technical Documents — Gap oint pages 276-278 P hort P10r8o-d1u4c7t2 Specification S Application Specification 114-25038 Section C - C 5 Keying Plug Part No. 104072-1 Ten plugs are supplied per strip. Order quantity reflects the number Extraction/Lance Reset of strips required. Tool No. 843477-1 Wire Size Ins. Contact Part No. Quick-Change Applicator for Hand Range Dia. Finish (Standard Pressure) AMApPp-Olic-LaEtoCrT foRrIC SAtrMipPp-eOr/-CMrAimTIpCer Tool AWG [mm2] Range Strip Form Loose Piece Machine* Machine Nos. Plating A 1-104481-1 1-104481-3 32-28 0.03-0.08 .025-.060 [0.64-1.52] Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1 Plating C 5-104481-2 5-104481-6 Plating A 1-104480-3 1-104480-6 . 26-22 0.13-0.3 .025-.060 [0.64-1.52] Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1 Plating C 1-104480-7 1-104480-4 Plating A 1-104479-0 1-104479-3 . 24-20 0.2-0.5 .025-.060 [0.64-1.52] Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1 Plating C 104479-8 1-104479-1 *For use with Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-722-1111) for part nos. of applicators for use with the Model “G” machines (shown on page 288), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Note:All part numbers are RoHS compliant. 222 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Short Point Wire-Applied Housings, Double-Row, Non-Polarized, .100 x .100 [2.54 x 2.54] Centerline A Material Black thermoplastic, flame retardant, 94V-0 rated Related Product Data .049 B .049 [.00.3961] [1.650.204] Performance Characteristics — [1.24] X [1.24]2 Plc. page 221 .198 Contacts — page 222 [5.03] 0.72 Mpaagetesa 1b0l4e, 1H0e5aders — .100 [.21.0504 ] Typ. X Section X-X [1.83] [2.54] Technical Documents — W pages 276-278 ire P1A101rp84op--dl12iu45cc70at23t iS8opne Scipfieccaitfiiocantion No. of Dimensions Housing -Applied HoShort Poin Pos. A B Part No. ust 4 .198 [5.03] .100 [2.54] 104482-1 ing s 6 .298 [7.57] .200 [5.08] 104482-2 8 .398 [10.11] .300 [7.62] 104482-3 10 .498 [12.65] .400 [10.16] 104482-4 5 12 .598 [15.19] .500 [12.70] 104482-5 14 .698 [17.73] .600 [15.24] 104482-6 16 .798 [20.27] .700 [17.78] 104482-7 18 .898 [22.81] .800 [20.32] 104482-8 20 .998 [25.35] .900 [22.86] 104482-9 22 1.098 [27.89] 1.000 [25.40] 1-104482-0 26 1.298 [32.97] 1.200 [30.48] 1-104482-1 28 1.398 [35.51] 1.300 [33.02] 1-104482-2 30 1.498 [38.05] 1.400 [35.56] 1-104482-3 32 1.598 [40.59] 1.500 [38.10] 1-104482-4 34 1.698 [43.13] 1.600 [40.64] 1-104482-5 36 1.798 [45.67] 1.700 [43.18] 1-104482-6 38 1.898 [48.21] 1.800 [45.72] 1-104482-7 40 1.998 [50.75] 1.900 [48.26] 1-104482-8 44 2.198 [55.83] 2.100 [53.34] 1-104482-9 52 2.598 [65.99] 2.500 [63.50] 2-104482-0 Note:All part numbers are RoHS compliant. 223 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Short Point Wire-Applied Housings, Double-Row, Polarized, .100 x .100 [2.54 x 2.54] Centerline A Material Black thermoplastic, flame retardant, .600 [15.24] 94V-0 rated .100 .100 [2.54] .095 .049 [2.54] [2.41] [1.24] .049 Related Product Data X [1.24]2 Plc. .036 [0.91] Performance Characteristics — .198 page 221 [5.03] 0.72 CMoantteaacbtsle — He paadgee r2s2 —2 [.21.0504] [.21.0504 ] Typ. X Section X-X [1.83] pages 104, 105, 135-138 B gs Technical Documents — n si pages 276-278 nt ou Poid H Product Specification Short e-Applie 1A101p84p--l12i45c70a23ti8on Specification NPoo.so.f A Dimensions B HPoaruts Ninog. Wir 8 .398 [10.11] .300 [7.62] 104483-1 10 .498[12.65] .400[10.16] 1-104483-1 12 .598[15.19] .500[12.70] 1-104483-2 5 14 .698 [17.73] .600 [15.24] 104483-9 18 .898 [22.81] .800 [20.32] 104483-2 20 .998 [25.35] .900 [22.86] 104483-3 26 1.298 [32.97] 1.200 [30.48] 104483-4 30 1.498 [38.05] 1.400 [35.56] 104483-5 38 1.898 [48.21] 1.800 [45.72] 104483-6 50 2.498[63.45] 2.400[60.96] 1-104483-3 52 2.598[65.99] 2.500[63.50] 1-104483-0 54 2.698 [68.53] 2.600 [66.04] 104483-7 64 3.198 [81.23] 3.100 [78.74] 104483-8 Note:Other sizes can be made available on request. Note:All part numbers are RoHS compliant. 224 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Interconnection System Product Facts ■ Receptacle assemblies mate with .025 [0.64] sq. posts; mating post length is .200 [5.08] min., .250 [6.35] max. ■ Proven AMPMODU receptacle contact design; dual cantilever beams, built-in anti-overstress, completely enclosed “box” design, standard or high-pressure ■ Insulation displacement technology ■ Two contact sizes for terminating 30-22 AWG [0.05- 0.3 mm2] wire range; .054 [1.37] max. insulation diam - eter with an insulation wall thickness of .015 [0.38] max. ■ Choice of gold duplex or tin plated contacts ■ Interchangeable crimp snap-in pin and receptacle M T contacts available E In ■ Housing sizes 2 through terc 25 positions, single-row .100 on [2.54] centers ne c ■ Plain housings are end-to-end tio n and/or back-to-back stackable S y for open pin field applications ste m ■ Optional header with “swaged tail” feature helps 5 prevent movement prior to The AMPMODU MTE contact, available in either Performance flow soldering Interconnection System standard or high-pressure, Specifications offers both wire-to-board features dual cantilever ■ Integral latch provides Electrical Characteristics and wire-to-wire connectors beams in an enclosed positive retention between using .025 [0.64] sq. post “box.” The post stop helps Contact Current Rating — header and receptacle technology. prevent a mating post from 3 amperes for single contact in free air housing disturbing the wire (Amperage could vary due to ambient ■ Coupling shrouds permit The AMPMODU MTE termination and also limits temperature, wire size and duty cycles.) Interconnection System ganging of smaller connectors the mating depth of a long Contact Termination with guide ribs to form larger consists of single-row post to protect a wrap-type Resistance — 15 milliohms (max.) housings with contacts single- or double-row termination at the base of Dielectric Withstanding Voltage — latching connectors preloaded on .100 [2.54] the post. The forward At Sea Level–600 VAC, rms centers. Housings are At 70,000 Ft. [21 336 m]–225 VAC, rms ■ Mass terminating tooling furnished with contacts contact stop helps prevent Insulation Resistance — provides lowest applied cost contact overinsertion prior partially inserted, leaving 5,000 megohms (min.) for most production needs to termination. All contacts the termination areas are furnished on carrier ■ SMT and SMT compatible, exposed. Final contact high-temp headers available insertion can be strips which are interlocked Environmental Characteristics for stability and positive accomplished automatically Operating Temperature — ■ Recognized under the location during termination. with Tyco Electronics -65°C to +105°C Component Program of Underwriters application equipment, and Single-row housings are Vibration — 15 G’s (gold), 10 G’s (tin) Laboratories Inc., manually when terminated available in sizes 2 through Physical Shock — 50 G’s File No. E28476 R with the Tyco Electronics 25 positions. Included are Industrial Mixed Flow Gasing — pistol grip hand tool. three styles of receptacle Class 1 (20 days) (gold) ■ Certified by Canadian housings—plain, polarized/ Standards The heart of the system is Product Specification latching and ribbed and two Association, the insulation displacement 108-25034 R styles of pin housings, File No. LR7189 contact design, featured in Application Specification shrouded with polarizing/ both pin and receptacle 114-25026 latching feature and ribbed. contacts. The receptacle 225 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Interconnection System (Continued) Wire-to-Board High-Temp Headers, Polarized/Latching, Straight Receptacle Assemblies and Right Angle Post, with Guide Ribs Receptacle Assemblies with or without Holddown (See pages 232 & 233) Polarized/Latching (See pages 249 & 250)2 (See pages 230 & 231) Double-Row Coupling Shroud (See page 241) Receptacle Assemblies, Polarized/Latching (See pages 230 & 231) AMPMODU Shrouded Headers, Headers, Double-Row, Polarized/Latching, Straight or Right Angle Straight Post, with or Post1(See pages without Swaged Tail 119-121, 124, 125, 127, (See pages 244 & 245)2 128, 131-133 & 149) Headers, Polarized/Latching, Right Angle Post, with or without Holddown Receptacle Assemblies Plain m (See pages 246 & 247) (See pages 228 and 229) e High Pressure Receptacle Assemblies, st Plain (See page 234) y S Receptacle Assemblies on with Guide Ribs cti (See pages 232 & 233) e n n o c er nt TE I AMPMODU Breakaway Headers, M Receptacle Contact, Single- or Double-Row, Straight Insulation Displacement or Right–Angle Post, with or 5 Recep(taUcsleed A isns aelmlblies) Single-Row Coupling withou(St Beeo apradg Rese t1e0n2ti-o1n0 F5e)ature Shroud (See page 240) 1Mating AMPMODU Double-Row Shrouded Header Assemblies must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline of last 1post to inside of end shroud wall. 2Surface Mount Right-Angle and Vertical Headers are also available (see pages 251 and 252) 226 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Interconnection System (Continued) Wire-to-Wire Pin Assemblies, Shrouded Polarized/Latching (See pages 236 & 237) Receptacle Assemblies, Polarized/Latching (See pages 230 & 231) Receptacle Contact, Insulation Displacement Pin Contact, (Used in all Insulation Receptacle Assemblies) Displacement (Used in all Pin Assemblies) Pin Assemblies with Guide Ribs (See pages 238 & 239) Panel Mount Pin Shroud (See page 242) Crimp Snap-In Receptacle Assemblies Single-Row M (RUesSeceHedep ow tupaitsachilgn eUeg C ns2—lo5on3at)daecdt (Seew iptha gGeusi d2e3 2R &ib s233) SphCarooguuedp 2 li(4nS0ge)e UCnCloroSinametdaepec pdSt a (nHUgaoespu e-2sIdn5i n 4wPg)iistnh— TE Interc o Note: For wire-to-wire applications shown above, all pin and receptacle assembly combinations are intermateable. nn e c tio n S y s te m 5 227 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip 1.120 form are available in positions [28.45] 2 thru 12. For ease of handling, positions 2 thru 5 are recom- .600 mended when using the [15.24] Tyco Electronics Manual Pistol Grip Tool. Material and Finish B Housing — Black thermoplastic, Typ. 94V-0 rated A Contacts — Phosphor Bronze, Position No. 1 Indicator plated as follows: (Farside) Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 blies [e0n.t0ir0e1 c2o7n] tmacitn u. ntidne irnp lcartiemdp . 0a0r0ea0,5 w0ith [.21.0504] Typ. m [0.00127] nickel e s Plating B — Duplex plated .000015 s e A [0.00038] gold on contact area, .000050 cl [0.00127] min. tin in crimp area, with .098 a pt entire contact underplated .000050 [2.49] ce [0.00127] nickel e R Plating C — .000100 [0.00254] tin TE over .000050 [0.00127] nickel on entire M contact Note: Insulation displacement contacts 5 accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. Related Product Data Mateable AMPMODU Products Breakaway Headers — pages 102- 110 (with .230 mating length) Reeled Breakaway Headers — pages 106, 107 (with .230 mating length) Machine Applied Bandolier Posts — page 163 Single-Row Shrouded Headers with .066 [1.68] End Dimension — pages 115, 116 Interchangeable Crimp Contacts (Short Point) — page 253 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents— These receptacle assemblies pages 277, 278 with plain housings can be stacked end-to-end and/or side- Product Specification to-side for single or double-row 108-25034 connections to an open pin field Application Specification with a .100 [2.54] centerline grid. 114-25026 228 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form Plain, Single-Row, .100 [2.54] Centerline (Continued) Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded Pos. A B Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings Segment 2 2.000 [50.80] .198 [5.03] 10 5-103979-1 5-103978-1 5-103977-1 5-103976-1 5-103975-1 5-103974-1 103688-1 3 2.400 [60.96] .298 [7.57] 8 5-103979-2 5-103978-2 5-103977-2 5-103976-2 5-103975-2 5-103974-2 103688-2 4 1.990 [50.55] .398 [10.11] 5 5-103979-3 5-103978-3 5-103977-3 5-103976-3 5-103975-3 5-103974-3 103688-3 5 1.990 [50.55] .498 [12.65] 4 5-103979-4 5-103978-4 5-103977-4 5-103976-4 5-103975-4 5-103974-4 103688-4 6 2.390 [60.71] .598 [15.19] 4 5-103979-5 5-103978-5 5-103977-5 5-103976-5 5-103975-5 5-103974-5 103688-5 7 1.400 [35.56] .698 [17.73] 2 5-103979-6 5-103978-6 5-103977-6 5-103976-6 5-103975-6 5-103974-6 103688-6 8 1.600 [40.64] .798 [20.27] 2 5-103979-7 5-103978-7 5-103977-7 5-103976-7 5-103975-7 5-103974-7 103688-7 9 1.800 [45.72] .898 [22.81] 2 5-103979-8 5-103978-8 5-103977-8 5-103976-8 5-103975-8 5-103974-8 103688-8 10 2.000 [50.80] .998 [23.35] 2 5-103979-9 5-103978-9 5-103977-9 5-103976-9 5-103975-9 5-103974-9 103688-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103979-0 6-103978-0 6-103977-0 6-103976-0 6-103975-0 6-103974-0 1-103688-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103979-1 6-103978-1 6-103977-1 6-103976-1 6-103975-1 6-103974-1 1-103688-1 M T E R e c MTE Receptacle Assemblies—Individual Form Plain, ep ta Single-Row, .100 [2.54] Centerline cle A s s e m Individual Receptacle Assembly Individual Receptacle Assembly NPoo. so.f DimenBsions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire UHnoluosaidnegds blies Plating A Plating B Plating C Plating A Plating B Plating C 13 1.298 [32.96] 6-103903-2 6-103684-2 6-103685-2 6-103902-2 6-103686-2 6-103687-2 1-103688-2 5 14 1.398[35.51] 6-103903-3 6-103684-3 6-103685-3 6-103902-3 6-103686-3 6-103687-3 1-103688-3 15 1.498[38.05] 6-103903-4 6-103684-4 6-103685-4 6-103902-4 6-103686-4 6-103687-4 1-103688-4 16 1.598[40.59] 6-103903-5 6-103684-5 6-103685-5 6-103902-5 6-103686-5 6-103687-5 1-103688-5 17 1.698[43.13] 6-103903-6 6-103684-6 6-103685-6 6-103902-6 6-103686-6 6-103687-6 1-103688-6 18 1.798[45.67] 6-103903-7 6-103684-7 6-103685-7 6-103902-7 6-103686-7 6-103687-7 1-103688-7 19 1.898[48.20] 6-103903-8 6-103684-8 6-103685-8 6-103902-8 6-103686-8 6-103687-8 1-103688-8 20 1.998[50.75] 6-103903-9 6-103684-9 6-103685-9 6-103902-9 6-103686-9 6-103687-9 1-103688-9 21 2.098[53.29] 7-103903-0 7-103684-0 7-103685-0 7-103902-0 7-103686-0 7-103687-0 2-103688-0 22 2.198[55.83] 7-103903-1 7-103684-1 7-103685-1 7-103902-1 7-103686-1 7-103687-1 2-103688-1 23 2.298[58.37] 7-103903-2 7-103684-2 7-103685-2 7-103902-2 7-103686-2 7-103687-2 2-103688-2 24 2.398[60.91] 7-103903-3 7-103684-3 7-103685-3 7-103902-3 7-103686-3 7-103687-3 2-103688-3 25 2.498[63.45] 7-103903-4 7-103684-4 7-103685-4 7-103902-4 7-103686-4 7-103687-4 2-103688-4 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with Tyco Electronics application machines, or manually when terminated with TycoElectronicspistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note:All part numbers are RoHS compliant. 229 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Polarized/Latching, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 1.120 2 thru 5 are recommended when [28.45] using the Tyco Electronics Manual Pistol Grip Tool. .600 [15.24] Material and Finish Housing — Black thermoplastic, 94V-0 rated B Contacts — Phosphor Bronze, plated Typ. as follows: A Plating A — Duplex plated .000030 Position No. 1 Indicator [0.00076] gold on contact area, .000050 (Farside) [0.00127] min. tin in crimp area, with s entire contact underplated .000050 e mbli [0.00127] nickel [.21.0504] Typ. Plating B — Duplex plated .000015 e ss [0.00038] gold on contact area, .000050 A e [0.00127] min. tin in crimp area, with cl entire contact underplated .000050 a pt [0.00127] nickel .098 e [2.49] ec Plating C — .000100 [0.00254] tin R E over .000050 [0.00127] nickel on entire MT contact Note: Insulation displacement contacts 5 accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. Related Product Data Mateable AMPMODU Products Pin Assemblies (Polarized/ Latching) — pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Shroud) — pages 238, 239, 242 Headers (Polarized/Latching) — pages 244-252 Interchangeable Crimp Contacts (Short Point) — page 253 Application Tooling — page 273 Performance Specifications — page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 230 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form Polarized/Latching, Single-Row, .100 [2.54] Centerline (Continued) Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded Pos. A B Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings Segment 2 2.000 [50.80] .198 [5.03] 10 5-103961-1 5-103960-1 5-103959-1 5-103958-1 5-103957-1 5-103956-1 104257-1 3 2.400 [60.96] .298 [7.57] 8 5-103961-2 5-103960-2 5-103959-2 5-103958-2 5-103957-2 5-103956-2 104257-2 4 1.990 [50.55] .398 [10.11] 5 5-103961-3 5-103960-3 5-103959-3 5-103958-3 5-103957-3 5-103956-3 104257-3 5 1.990 [50.55] .498 [12.65] 4 5-103961-4 5-103960-4 5-103959-4 5-103958-4 5-103957-4 5-103956-4 104257-4 6 2.390 [60.71] .598 [15.19] 4 5-103961-5 5-103960-5 5-103959-5 5-103958-5 5-103957-5 5-103956-5 104257-5 7 1.400 [35.56] .698 [17.73] 2 5-103961-6 5-103960-6 5-103959-6 5-103958-6 5-103957-6 5-103956-6 104257-6 8 1.600 [40.64] .798 [20.27] 2 5-103961-7 5-103960-7 5-103959-7 5-103958-7 5-103957-7 5-103956-7 104257-7 9 1.800 [45.72] .898 [22.81] 2 5-103961-8 5-103960-8 5-103959-8 5-103958-8 5-103957-8 5-103956-8 104257-8 10 2.000 [50.80] .998 [23.35] 2 5-103961-9 5-103960-9 5-103959-9 5-103958-9 5-103957-9 5-103956-9 104257-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103961-0 6-103960-0 6-103959-0 6-103958-0 6-103957-0 6-103956-0 1-104257-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103961-1 6-103960-1 6-103959-1 6-103958-1 6-103957-1 6-103956-1 1-104257-1 M T E R e c e MTE Receptacle Assemblies—Individual Form Polarized/Latching, p ta Single-Row, .100 [2.54] Centerline cle A s s e m Individual Receptacle Assembly Individual Receptacle Assembly NPoo. so.f DimenBsions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire UHnoluosaidnegds blies Plating A Plating B Plating C Plating A Plating B Plating C 13 1.298[32.96] 6-103897-2 6-103640-2 6-103641-2 6-103734-2 6-103644-2 6-103645-2 1-104257-2 5 14 1.398[35.51] 6-103897-3 6-103640-3 6-103641-3 6-103734-3 6-103644-3 6-103645-3 1-104257-3 15 1.498[38.05] 6-103897-4 6-103640-4 6-103641-4 6-103734-4 6-103644-4 6-103645-4 1-104257-4 16 1.598[40.59] 6-103897-5 6-103640-5 6-103641-5 6-103734-5 6-103644-5 6-103645-5 1-104257-5 17 1.698[43.13] 6-103897-6 6-103640-6 6-103641-6 6-103734-6 6-103644-6 6-103645-6 1-104257-6 18 1.798[45.67] 6-103897-7 6-103640-7 6-103641-7 6-103734-7 6-103644-7 6-103645-7 1-104257-7 19 1.898[48.20] 6-103897-8 6-103640-8 6-103641-8 6-103734-8 6-103644-8 6-103645-8 1-104257-8 20 1.998[50.75] 6-103897-9 6-103640-9 6-103641-9 6-103734-9 6-103644-9 6-103645-9 1-104257-9 21 2.098[53.29] 7-103897-0 7-103640-0 7-103641-0 7-103734-0 7-103644-0 7-103645-0 2-104257-0 22 2.198[55.83] 7-103897-1 7-103640-1 7-103641-1 7-103734-1 7-103644-1 7-103645-1 2-104257-1 23 2.298[58.37] 7-103897-2 7-103640-2 7-103641-2 7-103734-2 7-103644-2 7-103645-2 2-104257-2 24 2.398[60.91] 7-103897-3 7-103640-3 7-103641-3 7-103734-3 7-103644-3 7-103645-3 2-104257-3 25 2.498[63.45] 7-103897-4 7-103640-4 7-103641-4 7-103734-4 7-103644-4 7-103645-4 2-104257-4 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with TycoElectronics application machines, or manually when terminated with TycoElectronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note:All part numbers are RoHS compliant. 231 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Guide Ribs, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 1.120 [28.45] 2 thru 12. For ease of handling, positions 2 thru 5 are recommended when using the Tyco Electronics .600 Manual Pistol Grip Tool. [15.24] Material and Finish Housing — Black thermoplastic, 94V-0 rated Contacts — Phosphor Bronze, B Typ. plated as follows: A Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000050 Position No. 1 Indicator [0.00127] min. tin in crimp area, with (Farside) entire contact underplated .000050 s blie [0.00127] nickel .100 m Plating B — Duplex plated .000015 [2.54] Typ se [0.00038] gold on contact area, .000050 s A [0.00127] min. tin in crimp area, with cle entire contact underplated .000050 pta [0.00127] nickel ce Plating C — .000100 [0.00254] tin e .098 R over .000050 [0.00127] nickel on entire TE contact [2.49] M Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] 5 min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. Mating post length for preloaded housings is .200 [5.08] min., .250 [6.35] max. Related Product Data Coupling Shrouds used with — Single-Row — page 240 Double-Row — page 241 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Single-Row Coupling Shrouds) — Pin Assemblies (Polarized/ Latching) — pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Interchangeable Crimp Contacts— Shroud) — pages 238, 239, 242 (Short Point) — page 253 Headers (Polarized/Latching) — Application Tooling — page 273 pages 244-252 Performance Specifications — Mateable AMPMODU Products page 225 (with Receptacle Assemblies Installed in Double-Row Coupling Technical Documents — Shrouds) — pages 277, 278 Headers, Shrouded, Double-Row Product Specification (.318 [8.08] mating post length, 108-25034 .150 [3.81] end dimension) — Application Specification pages 119-121, 124, 125, 128, 129, 114-25026 131-133 232 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Receptacle Assemblies—Strip Form with Guide Ribs, Single-Row, .100 [2.54] Centerline (Continued) Housing Strip Form Receptacle Assembly Strip Form Receptacle Assembly No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded Pos. A B Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings Segment 2 2.000 [50.80] .198 [5.03] 10 5-103973-1 5-103972-1 5-103971-1 5-103970-1 5-103969-1 5-103968-1 103648-1 3 2.400 [60.96] .298 [7.57] 8 5-103973-2 5-103972-2 5-103971-2 5-103970-2 5-103969-2 5-103968-2 103648-2 4 1.990 [50.55] .398 [10.11] 5 5-103973-3 5-103972-3 5-103971-3 5-103970-3 5-103969-3 5-103968-3 103648-3 5 1.990 [50.55] .498 [12.65] 4 5-103973-4 5-103972-4 5-103971-4 5-103970-4 5-103969-4 5-103968-4 103648-4 6 2.390 [60.71] .598 [15.19] 4 5-103973-5 5-103972-5 5-103971-5 5-103970-5 5-103969-5 5-103968-5 103648-5 7 1.400 [35.56] .698 [17.73] 2 5-103973-6 5-103972-6 5-103971-6 5-103970-6 5-103969-6 5-103968-6 103648-6 8 1.600 [40.64] .798 [20.27] 2 5-103973-7 5-103972-7 5-103971-7 5-103970-7 5-103969-7 5-103968-7 103648-7 9 1.800 [45.72] .898 [22.81] 2 5-103973-8 5-103972-8 5-103971-8 5-103970-8 5-103969-8 5-103968-8 103648-8 10 2.000 [50.80] .998 [23.35] 2 5-103973-9 5-103972-9 5-103971-9 5-103970-9 5-103969-9 5-103968-9 103648-9 11 2.200 [55.88] 1.098 [27.89] 2 6-103973-0 6-103972-0 6-103971-0 6-103970-0 6-103969-0 6-103968-0 1-103648-0 12 2.400 [60.96] 1.198 [30.43] 2 6-103973-1 6-103972-1 6-103971-1 6-103970-1 6-103969-1 6-103968-1 1-103648-1 M T E R e c MTE Receptacle Assemblies—Individual Form with Guide Ribs, e p ta Single-Row, .100 [2.54] Centerline c le A s s e Individual Receptacle Assembly Individual Receptacle Assembly m NPoo. so.f DimenBsions Platin3g0- A26 AWGP l[a0t.i0n5g- 0B.15mmP2]l aWtiinrge C Platin2g6- A22 AWGP l[a0t.i1n2g- 0B.3mm2P] Wlatirineg C UHnoluosaidnegds blies 13 1.298[32.96] 6-103901-2 6-103649-2 6-103650-2 6-103900-2 6-103651-2 6-103652-2 1-103648-2 5 14 1.398[35.51] 6-103901-3 6-103649-3 6-103650-3 6-103900-3 6-103651-3 6-103652-3 1-103648-3 15 1.498[38.05] 6-103901-4 6-103649-4 6-103650-4 6-103900-4 6-103651-4 6-103652-4 1-103648-4 16 1.598[40.59] 6-103901-5 6-103649-5 6-103650-5 6-103900-5 6-103651-5 6-103652-5 1-103648-5 17 1.698[43.13] 6-103901-6 6-103649-6 6-103650-6 6-103900-6 6-103651-6 6-103652-6 1-103648-6 18 1.798[45.67] 6-103901-7 6-103649-7 6-103650-7 6-103900-7 6-103651-7 6-103652-7 1-103648-7 19 1.898[48.20] 6-103901-8 6-103649-8 6-103650-8 6-103900-8 6-103651-8 6-103652-8 1-103648-8 20 1.998[50.75] 6-103901-9 6-103649-9 6-103650-9 6-103900-9 6-103651-9 6-103652-9 1-103648-9 21 2.098[53.29] 7-103901-0 7-103649-0 7-103650-0 7-103900-0 7-103651-0 7-103652-0 2-103648-0 22 2.198[55.83] 7-103901-1 7-103649-1 7-103650-1 7-103900-1 7-103651-1 7-103652-1 2-103648-1 23 2.298[58.37] 7-103901-2 7-103649-2 7-103650-2 7-103900-2 7-103651-2 7-103652-2 2-103648-2 24 2.398[60.91] 7-103901-3 7-103649-3 7-103650-3 7-103900-3 7-103651-3 7-103652-3 2-103648-3 25 2.498[63.45] 7-103901-4 7-103649-4 7-103650-4 7-103900-4 7-103651-4 7-103652-4 2-103648-4 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with TycoElectronics application machines, or manually when terminated with TycoElectronics pistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1to remove receptacle contacts. 3. Keying plugs are available, see page 253. Note:All part numbers are RoHS compliant. 233 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE High Pressure Receptacle Assemblies—Plain, Single-Row, .100 [2.54] Centerline Receptacle Contacts (See Note 1) .520 [13.21] Preassembled housings in strip 1.120 form are available in positions [28.45] 2 thru 12. For ease of handling, positions 2 thru 5 are recom- .600 mended when using the [15.24] Tyco Electronics Manual Pistol Grip Tool. Material and Finish B Housing — Black thermoplastic, Typ. 94V-0 rated A Contacts — Phosphor Bronze, duplex plated .000030 [0.00076] gold on Position No. 1 Indicator (Farside) contact area, .000050 [0.00127] min. tin in crimp area, with entire contact blies underplated .000050 [0.00127] nickel [.21.0504] Typ. m Note: Insulation displacement contacts se accept an insulation diameter of .030 [0.76] s A min. to .054 [1.37] max. with an ptacle imnsaux.l aMtioatnin wg apllo stht ilceknngeths sfo or fp .r0e1lo5a d[0e.d38] [.20.9489] e housingsis .200 [5.08] min., .250 [6.35] c Re max. E T M Related Product Data 5 Mateable AMPMODU Products Breakaway Headers — pages 102- 110, (with .230 mating length) Reeled Breakaway Headers — pages 106, 107 (with .230 mating length) Machine Applied Bandolier Strip Form Strip Form Posts — page 163 No. of Dimensions Housings Receptacle Receptacle Quantities Per Assembly Assembly Application Tooling — page 273 Pos. A B Strip Segment 30-26 AWG 26-22 AWG [.05-.15mm2] Wire [.12-.30mm2] Wire Performance Specifications — 2 1.980 [50.29] .198 [5.03] 10 5-104438-1 5-104439-1 page 225 3 1.490 [37.85] .298 [7.57] 5 5-104438-2 5-104439-2 4 1.990 [50.55] .398 [10.11] 5 5-104438-3 5-104439-3 Technical Documents— 5 1.990 [50.55] .498 [12.65] 4 5-104438-4 5-104439-4 pages 277, 278) 6 2.390 [60.71] .598 [15.19] 4 5-104438-5 5-104439-5 Product Specification 7 1.400 [35.56] .698 [17.73] 2 5-104438-6 5-104439-6 108-25034 8 1.600 [40.64] .798 [20.27] 2 5-104438-7 5-104439-7 Application Specification 9 1.800 [45.72] .898 [22.81] 2 5-104438-8 5-104439-8 114-25026 10 2.000 [50.80] .998 [23.35] 2 5-104438-9 5-104439-9 11 2.200 [55.88] 1.098 [27.89] 2 6-104438-0 6-104439-0 12 2.400 [60.96] 1.198 [30.43] 2 6-104438-1 6-104439-1 Notes: 1. Receptacle assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with TycoElectronicsapplication machines, or manually when terminated with TycoElectronicspistol grip hand tool. 2. High pressure receptacle contacts can be made available in other housing styles and position sizes. Contact your Tyco Electronics sales representative. Note:All part numbers are RoHS compliant. 234 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE High Pressure Receptacle Assemblies – Guide Ribs Receptacle Contacts (See Note 1) .520 [13.21] 1.120 Preassembled housings in strip [28.45] form are available in positions 2 thru 12. For ease of handling, .600 positions 2 thru 5 are recom- [15.24] mended when using the Tyco Electronics Manual Pistol Grip Tool. B Material and Finish Typ. Housing— Thermoplastic, black, A 94V-0 rated Position No. 1 Indicator Contacts— Phosphor Bronze, (Farside) duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin on crimp area, with entire contact [.21.0504] Typ underplated .000050 [0.00127] nickel. M Related Product Data TE P Coupling Shrouds used with— in Single-Row— page 240 .098 As Double-Row— page 241 [2.49] se m Mateable AMPMODU Products b (with Receptacle Assemblies lie s Installed in Single-Row Coupling Shrouds)— Pin Assemblies (Polarized/ 5 Latching)— pages 236, 237 Pin Assemblies with Guide Ribs (installed in Panel Mount Pin Shroud)— pages 238, 239, 242 Headers (Polarized/Latching)— pages 244-252 Mateable AMPMODU Products (with Receptacle Assemblies Installed in Double-Row Coupling Strip Form Strip Form Shrouds)— No. of Dimensions Housings Receptacle Receptacle Headers, Shrouded, Double-Row Pos. A B SQturiapn Stiteigesm Peenrt 3A0s-2s6e mAWblyG 2A6s-2s2e mAWblyG (.318 [8.08] mating post length, [.05-.15mm2] Wire [.12-.30mm2] Wire .150 [3.81] end dimension)— 2 1.980[50.29] .198[5.03] 10 5-147396-1 5-147030-3 pages 119-121, 124, 125, 128, 129, 3 1.490[37.85] .298[7.57] 5 5-147396-2 5-147030-4 131-133 4 1.990[50.55] .398[10.11] 5 5-147396-3 5-147030-1 Application Tooling— page 273 5 1.990[50.55] .498[12.65] 4 5-147396-4 5-147030-2 Performance Specifications— 6 2.390[60.71] .598[15.19] 4 5-147396-5 5-147030-5 page 225 7 1.400[35.56] .698[17.73] 2 5-147396-6 5-147030-6 8 1.600[40.64] .798[20.27] 2 5-147396-7 5-147030-7 Technical Documents— 9 1.800[45.72] .898[22.81] 2 5-147396-8 5-147030-8 pages 277, 278 10 2.000[50.80] .998[23.35] 2 5-147396-9 5-147030-9 Product Specification 11 2.200[55.88] 1.098[27.89] 2 6-147396-0 6-147030-0 108-25034 12 2.400[60.96] 1.198[30.43] 2 6-147396-1 6-147030-1 Application Specification 114-25026 Note:All part numbers are RoHS compliant. 235 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Pin Assemblies, Shrouded—Polarized/Latching, Single-Row, .100 [2.54] Centerline Pin Contacts (See Note 1) .520 [13.21] Preassembled housings in strip form are available in positions 2 thru 12. For ease of handling, positions 2 thru 5 are recom- mended when using the 1.470 Tyco Electronics Manual Pistol [37.34] Grip Tool. Material and Finish .950 [24.13] Housing— Black thermoplastic, 94V-0 rated Contacts— Phosphor Bronze, plated as follows: Plating A— Duplex plated .000030 [0.00076] gold on contact area, .000050 [0.00127] min. tin in crimp area, with B Position No. 1 es entire contact underplated .000050 Typ. Indicator bli [0.00127] nickel A m e Plating B— Duplex plated .000015 s As [0.00038] gold on contact area, .000050 n [0.00127] min. tin in crimp area, with E Pi entire contact underplated .000050 .260 MT [0.00127] nickel [6.60] Plating C— .000100 [0.00254] tin over .000050 [0.00127] nickel on entire .100 contact [2.54] Typ. .200 5 [5.08] Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. Related Product Data Mateable AMPMODU Products— Receptacle Assemblies (Polarized/Latching)— pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single-Row Coupling Shroud)— pages 232, 233, 235, 240 Interchangeable Crimp Contacts— page 254 Application Tooling— page 273 Performance Specifications— page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 236 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Pin Assemblies, Shrouded—Strip Form Polarized/Latching, Single-Row, .100 [2.54] Centerline (Continued) Housing Strip Form Pin Assembly Strip Form Pin Assembly No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded Pos. A B Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings Segment 2 2.360 [59.94] .295 [7.49] 8 5-103949-1 5-103948-1 5-103947-1 5-103946-1 5-103945-1 5-103944-1 103653-1 3 1.980 [50.29] .395 [10.03] 5 5-103949-2 5-103948-2 5-103947-2 5-103946-2 5-103945-2 5-103944-2 103653-2 4 1.980 [50.29] .495 [12.57] 4 5-103949-3 5-103948-3 5-103947-3 5-103946-3 5-103945-3 5-103944-3 103653-3 5 2.380 [60.45] .595 [15.11] 4 5-103949-4 5-103948-4 5-103947-4 5-103946-4 5-103945-4 5-103944-4 103653-4 6 1.390 [35.31] .695 [17.65] 2 5-103949-5 5-103948-5 5-103947-5 5-103946-5 5-103945-5 5-103944-5 103653-5 7 2.390 [60.71] .795 [20.19] 3 5-103949-6 5-103948-6 5-103947-6 5-103946-6 5-103945-6 5-103944-6 103653-6 8 1.790 [45.47] .895 [22.73] 2 5-103949-7 5-103948-7 5-103947-7 5-103946-7 5-103945-7 5-103944-7 103653-7 9 1.990 [50.57] .995 [25.27] 2 5-103949-8 5-103948-8 5-103947-8 5-103946-8 5-103945-8 5-103944-8 103653-8 10 2.190 [55.63] 1.095 [27.81] 2 5-103949-9 5-103948-9 5-103947-9 5-103946-9 5-103945-9 5-103944-9 103653-9 11 2.390 [60.71] 1.195 [30.35] 2 6-103949-0 6-103948-0 6-103947-0 6-103946-0 6-103945-0 6-103944-0 1-103653-0 12 2.590[65.79] 1.295[32.89] 2 6-103949-1 6-103948-1 6-103947-1 6-103946-1 6-103945-1 6-103944-1 1-103653-1 M T E MTE Pin Assemblies, Shrouded—Individual Form Polarized/Latching, P in Single-Row, .100 [2.54] Centerline A s s e m b Individual Pin Assembly Individual Pin Assembly lie No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded s Pos. B Housings Plating A Plating B Plating C Plating A Plating B Plating C 13 1.395[35.43] 6-103894-2 6-103658-2 6-103659-2 6-103893-2 6-103660-2 6-103661-2 1-103653-2 5 14 1.495[37.97] 6-103894-3 6-103658-3 6-103659-3 6-103893-3 6-103660-3 6-103661-3 1-103653-3 15 1.595[40.51] 6-103894-4 6-103658-4 6-103659-4 6-103893-4 6-103660-4 6-103661-4 1-103653-4 16 1.695[43.05] 6-103894-5 6-103658-5 6-103659-5 6-103893-5 6-103660-5 6-103661-5 1-103653-5 17 1.795[45.59] 6-103894-6 6-103658-6 6-103659-6 6-103893-6 6-103660-6 6-103661-6 1-103653-6 18 1.895[48.13] 6-103894-7 6-103658-7 6-103659-7 6-103893-7 6-103660-7 6-103661-7 1-103653-7 19 1.995[50.67] 6-103894-8 6-103658-8 6-103659-8 6-103893-8 6-103660-8 6-103661-8 1-103653-8 20 2.095[53.21] 6-103894-9 6-103658-9 6-103659-9 6-103893-9 6-103660-9 6-103661-9 1-103653-9 21 2.195[55.75] 7-103894-0 7-103658-0 7-103659-0 7-103893-0 7-103660-0 7-103661-0 2-103653-0 22 2.295[58.29] 7-103894-1 7-103658-1 7-103659-1 7-103893-1 7-103660-1 7-103661-1 2-103653-1 23 2.395[60.83] 7-103894-2 7-103658-2 7-103659-2 7-103893-2 7-103660-2 7-103661-2 2-103653-2 24 2.495[63.37] 7-103894-3 7-103658-3 7-103659-3 7-103893-3 7-103660-3 7-103661-3 2-103653-3 25 2.595[65.91] 7-103894-4 7-103658-4 7-103659-4 7-103893-4 7-103660-4 7-103661-4 2-103653-4 Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with TycoElectronicsapplication machines, or manually when terminated with TycoElectronicspistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1to remove pin contacts. Note:All part numbers are RoHS compliant. 237 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Pin Assemblies—Guide Ribs, Single-Row, .100 [2.54] Centerline Pin Contacts (See Note 1) .520 [13.21] Preassembled housings in strip 1.120 form are available in positions [28.45] 2 thru 12. For ease of handling, positions 2 thru 5 are recom- .600 mended when using the [15.24] Tyco Electronics Manual Pistol Grip Tool. Material and Finish B Position No. 1 Indicator Housing— Black thermoplastic, Typ. (Farside) 94V-0 rated A Contacts— Phosphor Bronze, plated as follows: Plating A— Duplex plated .000030 [0.00076] gold on contact area, .000050 .100 [0.00127] min. tin in crimp area, with [2.54] Typ. entire contact underplated .000050 s blie [0.00127] nickel m Plating B— Duplex plated .000015 se [0.00038] gold on contact area, .000050 s A [0.00127] min. tin in crimp area, with .098 Pin entire contact underplated .000050 [2.49] E [0.00127] nickel T M Plating C— .000100 [0.00254] tin over .000050 [0.00127] nickel on entire contact 5 Note: Insulation displacement contacts accept an insulation diameter of .030 [0.76] min. to .054 [1.37] max. with an insula- tion wall thickness of .015 [0.38] max. Related Product Data Mateable AMPMODU MTE Products (with Pin Assembly Installed in Panel Mount Pin Shroud)— pages 242, 243 Receptacle Assemblies (Polarized/Latching)— pages 230, 231 Receptacle Assemblies with Guide Ribs (installed in Single Row Coupling Shroud)— pages 232, 233, 235, 240 Interchangeable Crimp Contacts— page 254 Application Tooling— page 273 Performance Specifications— page 225 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 238 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Pin Assemblies—Strip Form with Guide Ribs, Single-Row, .100 [2.54] Centerline (Continued) Housing Strip Form Pin Assembly Strip Form Pin Assembly No. of Dimensions Quantities 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded Pos. A B Per Strip Plating A Plating B Plating C Plating A Plating B Plating C Housings Segment 2 1.980[50.29] 0.198[5.03] 10 5-103955-1 5-103954-1 5-103953-1 5-103952-1 5-103951-1 5-103950-1 104503-1 3 1.490[37.85] 0.298[7.57] 5 5-103955-2 5-103954-2 5-103953-2 5-103952-2 5-103951-2 5-103950-2 104503-2 4 1.990[50.55] 0.398[10.11] 5 5-103955-3 5-103954-3 5-103953-3 5-103952-3 5-103951-3 5-103950-3 104503-3 5 1.990[50.55] 0.498[12.65] 4 5-103955-4 5-103954-4 5-103953-4 5-103952-4 5-103951-4 5-103950-4 104503-4 6 2.390[60.71] 0.598[15.19] 4 5-103955-5 5-103954-5 5-103953-5 5-103952-5 5-103951-5 5-103950-5 104503-5 7 1.400[35.56] 0.698[17.73] 2 5-103955-6 5-103954-6 5-103953-6 5-103952-6 5-103951-6 5-103950-6 104503-6 8 1.600[40.64] 0.798[20.27] 2 5-103955-7 5-103954-7 5-103953-7 5-103952-7 5-103951-7 5-103950-7 104503-7 9 1.800[45.72] 0.898[22.81] 2 5-103955-8 5-103954-8 5-103953-8 5-103952-8 5-103951-8 5-103950-8 104503-8 10 2.000[50.80] 0.998[25.35] 2 5-103955-9 5-103954-9 5-103953-9 5-103952-9 5-103951-9 5-103950-9 104503-9 11 2.200[55.88] 1.098[27.89] 2 6-103955-0 6-103954-0 6-103953-0 6-103952-0 6-103951-0 6-103950-0 1-104503-0 12 2.400[60.96] 1.198[30.43] 2 6-103955-1 6-103954-1 6-103953-1 6-103952-1 6-103951-1 6-103950-1 1-104503-1 M T E MTE Pin Assemblies—Individual Form with Guide Ribs, P in Single-Row, .100 [2.54] Centerline A s s e m b Individual Pin Assembly Individual Pin Assembly lie No. of Dimensions 30-26 AWG [0.05-0.15mm2] Wire 26-22 AWG [0.12-0.3mm2] Wire Unloaded s Pos. B Housings Plating A Plating B Plating C Plating A Plating B Plating C 13 1.398[35.51] 6-103896-2 6-103657-2 6-103656-2 6-103895-2 6-103655-2 6-103654-2 1-104503-2 5 14 1.498[38.05] 6-103896-3 6-103657-3 6-103656-3 6-103895-3 6-103655-3 6-103654-3 1-104503-3 15 1.598[40.59] 6-103896-4 6-103657-4 6-103656-4 6-103895-4 6-103655-4 6-103654-4 1-104503-4 16 1.698[43.13] 6-103896-5 6-103657-5 6-103656-5 6-103895-5 6-103655-5 6-103654-5 1-104503-5 17 1.798[45.67] 6-103896-6 6-103657-6 6-103656-6 6-103895-6 6-103655-6 6-103654-6 1-104503-6 18 1.898[48.20] 6-103896-7 6-103657-7 6-103656-7 6-103895-7 6-103655-7 6-103654-7 1-104503-7 19 1.998[50.75] 6-103896-8 6-103657-8 6-103656-8 6-103895-8 6-103655-8 6-103654-8 1-104503-8 20 2.098[53.29] 6-103896-9 6-103657-9 6-103656-9 6-103895-9 6-103655-9 6-103654-9 1-104503-9 21 2.198[55.83] 7-103896-0 7-103657-0 7-103656-0 7-103895-0 7-103655-0 7-103654-0 2-104503-0 22 2.298[58.37] 7-103896-1 7-103657-1 7-103656-1 7-103895-1 7-103655-1 7-103654-1 2-104503-1 23 2.398[60.91] 7-103896-2 7-103657-2 7-103656-2 7-103895-2 7-103655-2 7-103654-2 2-104503-2 24 2.498[63.45] 7-103896-3 7-103657-3 7-103656-3 7-103895-3 7-103655-3 7-103654-3 2-104503-3 25 2.598[65.99] 7-103896-4 7-103657-4 7-103656-4 7-103895-4 7-103655-4 7-103654-4 2-104503-4 Notes: 1. Pin assemblies are furnished with strip contacts partially inserted into housing—contacts latched into “preload” windows. Contacts are fully inserted into housings automatically when terminated with TycoElectronicsapplication machines, or manually when terminated with TycoElectronicspistol grip hand tool. 2. Use Extraction/Lance Reset Tool No. 843477-1to remove pin contacts. Note:All part numbers are RoHS compliant. 239 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs Single-Row .307 A [7.80] Material Black thermoplastic, 94V-0 rated .582 [14.78] Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 No. of Dimension Single-Row No. of Dimension Single-Row Pos. A Coupling Shroud Pos. A Coupling Shroud 4 .485 [12.32] 103680-1 15 1.585 [40.26] 1-103680-2 5 .585 [14.86] 103680-2 16 1.685 [42.80] 1-103680-3 6 .685 [17.40] 103680-3 17 1.785 [45.34] 1-103680-4 7 .785 [19.94] 103680-4 18 1.885 [47.88] 1-103680-5 8 .885 [22.48] 103680-5 19 1.985 [50.42] 1-103680-6 9 .985 [25.02] 103680-6 20 2.085 [52.96] 1-103680-7 10 1.085 [27.56] 103680-7 21 2.185 [55.50] 1-103680-8 11 1.185 [30.10] 103680-8 22 2.285 [58.04] 1-103680-9 12 1.285 [32.64] 103680-9 23 2.385 [60.58] 2-103680-0 13 1.385 [35.18] 1-103680-0 24 2.485 [63.12] 2-103680-1 14 1.485 [37.72] 1-103680-1 25 2.585 [65.66] 2-103680-2 s d u o hr S g n pli u o C E Pin Assemblies with Guide MT Ribs, Installed in Panel Mount Pin Shroud (Refer to pages 238, 239 & 242) 5 Pin Assembly, Shrouded Polarized/Latching (Refer to pages 236 & 237) Receptacle Assemblies with Guide Ribs (Refer to pages 232, 233, 235) Single-Row Coupling Shroud Headers, Polarized/Latching, Straight and Right Angle Post, with or without Holddown (See pages 244-252) Typical Application of Single-Row Coupling Shroud and Mating AMPMODU MTE Products Note:All part numbers are RoHS compliant. 240 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Coupling Shrouds for MTE Receptacle Assemblies with Guide Ribs (Continued) Double-Row Material .735 Black thermoplastic, 94V-0 rated [18.67] Technical Documents — Position No. 1 pages 277, 278 Identification A Product Specification 108-25034 Application Specification 114-25026 No. of Dimension Double-Row Pos. A Coupling Shroud 8 .585 [14.86] 103681-1 10 .685 [17.40] 103681-2 12 .785 [19.94] 103681-3 14 .885 [22.48] 103681-4 16 .985 [25.02] 103681-5 18 1.085 [27.56] 104500-1 20 1.185 [30.10] 104500-2 22 1.285 [32.64] 104500-3 24 1.385 [35.18] 104500-4 26 1.485 [37.72] 104500-5 28 1.585 [40.26] 104500-6 30 1.685 [42.80] 104500-7 M 32 1.785 [45.34] 104500-8 T E 34 1.885 [47.88] 104500-9 C 40 2.185 [55.50] 1-104500-0 ou p 50 2.685 [68.20] 1-104500-1 lin g S h ro u d s 5 AMPMODU Shrouded Headers Double-Row, Straight or Right–Angle Post1 Double-Row Coupling Shroud Receptacle Assemblies with Guide Ribs (Refer to pages 232, 233 & 235) 1Mating AMPMODU Double-Row Shrouded Headers must have .318 [8.08] mating post length and .150 [3.81] dimension from centerline 1of last post to inside of end shroud wall. Typical Application of Double-Row Coupling Shroud and Mating AMPMODU Products Note:All part numbers are RoHS compliant. 241 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Panel Mount Pin Shrouds for MTE Pin Assemblies with Guide Ribs, Single-Row Material .310 [7.87] Black thermoplastic, 94V-0 rated A .250 Technical Documents — [6.35] pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 .990 [25.15] Position No. 1 Identification .320 [8.13] nt Mouuds E Panel Pin Shro [.62.7806] [.83.2103] T M B 5 No. of Dimensions Panel Mount No. of Dimensions Panel Mount Pos. A B Pin Shroud Pos. A B Pin Shroud 2 .735 [18.67] .625 [15.88] 103682-1 14 1.935 [49.15] 1.825 [46.36] 1-103682-3 3 .835 [21.21] .725 [18.42] 103682-2 15 2.035 [51.69] 1.925 [48.90] 1-103682-4 4 .935 [23.75] .825 [20.96] 103682-3 16 2.135 [54.23] 2.025 [51.44] 1-103682-5 5 1.035 [26.29] .925 [23.50] 103682-4 17 2.235 [56.77] 2.125 [53.98] 1-103682-6 6 1.135 [28.83] 1.025 [26.04] 103682-5 18 2.335 [59.31] 2.225 [56.52] 1-103682-7 7 1.235 [31.37] 1.125 [28.58] 103682-6 19 2.435 [61.85] 2.325 [59.06] 1-103682-8 8 1.335 [33.91] 1.225 [31.12] 103682-7 20 2.535 [64.39] 2.425 [61.60] 1-103682-9 9 1.435 [36.45] 1.325 [33.66] 103682-8 21 2.635 [66.93] 2.525 [64.14] 2-103682-0 10 1.535 [38.99] 1.425 [36.20] 103682-9 22 2.735 [69.47] 2.625 [66.68] 2-103682-1 11 1.635 [41.53] 1.525 [38.74] 1-103682-0 23 2.835 [72.01] 2.725 [69.22] 2-103682-2 12 1.735 [44.07] 1.625 [41.28] 1-103682-1 24 2.935 [74.55] 2.825 [71.76] 2-103682-3 13 1.835 [46.61] 1.725 [43.82] 1-103682-2 25 3.035 [77.09] 2.925 [74.30] 2-103682-4 Note:All part numbers are RoHS compliant. 242 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Panel Mount Pin Shrouds for MTE Pin Assemblies with Guide Ribs, Single-Row (Continued) Material Black thermoplastic, 94V-0 rated Technical Documents — pages 277, 278 Product Specification Pin Assembly with Guide Ribs (Refer to 108-25034 pages 238 & 239) Application Specification 114-25026 Panel Mount Pin Shroud Receptacle Assemblies with Guide Ribs, Installed in Single-Row Coupling Shroud (Refer to pages 232, 233, 235 & 240) Rear of Panel M PoRtloae rcpiezaepgdtea/Lsc lae2t 3cAh0si n&sge 2 m(3Rb1el)yf,er Pin ShrouTE Panel M dsou n t Typical Application of Panel Mount Pin Shroud and Mating AMPMODU Products 5 243 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With or Without Swaged Tail) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator A Material and Finish .230 B Housing — Black thermoplastic, [5.84] 94V-0 rated C .100 .200 Ref. .060 [5.08] [2.54] Posts — Brass, plated as follows: [1.52] X (Contact Area) .130 Plating A — Duplex plated .000030 [3.30] [0.00076] gold on contact area, .000100 .200 .275 [0.00254] min. tin on solder area, with [5.08] [6.98] entire post underplated .000050 [P0l.a0t0i1n2g7 B] n —ick eDluplex plated .000015 [.31.2005] [.21.0504] Typ. X .350 [8.89] ders [[00..0000023584]] gmoilnd. otinn oconn stoacldt earr eaare, a.0, 0w0it1h00 [.10.6502] Section X-X ea entire post underplated .000050 E H [0.00127] nickel MT Plating C — .000100 [0.00254] tin over .000050 [0.00127] nickel on entire C post .100* Typ. [2.54] 5 Related Product Data Mateable AMPMODU MTE .035±.003 Dia. Typ. Products— [0.89±0.08] or Receptacle Assemblies .040±.003 Dia. Typ. (Polarized/Latching)— [1.02±0.08] (for Retention Tails) pages 230, 231 Receptacle Assemblies with Guide Recommended PC Board Hole Layout Ribs (installed in Single-Row *±.003 [±0.08]; tolerances not to accumulate within one connector pattern. Coupling Shroud)— Note:Swaged retention tails are provided in a minimum of two locations per header. pages 232, 233, 235, 240 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 244 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline (Continued) No. of Dimensions Polarized/Latching Header With Swage Polarized/Latching Header Without Swage Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103908-1 5-104362-1 5-103669-1 5-103735-1 5-104363-1 5-103639-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103908-2 5-104362-2 5-103669-2 5-103735-2 5-104363-2 5-103639-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103908-3 5-104362-3 5-103669-3 5-103735-3 5-104363-3 5-103639-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103908-4 5-104362-4 5-103669-4 5-103735-4 5-104363-4 5-103639-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103908-5 5-104362-5 5-103669-5 5-103735-5 5-104363-5 5-103639-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103908-6 5-104362-6 5-103669-6 5-103735-6 5-104363-6 5-103639-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103908-7 5-104362-7 5-103669-7 5-103735-7 5-104363-7 5-103639-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103908-8 5-104362-8 5-103669-8 5-103735-8 5-104363-8 5-103639-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103908-9 5-104362-9 5-103669-9 5-103735-9 5-104363-9 5-103639-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103908-0 6-104362-0 6-103669-0 6-103735-0 6-104363-0 6-103639-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103908-1 6-104362-1 6-103669-1 6-103735-1 6-104363-1 6-103639-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103908-2 6-104909-2 6-103669-2 6-103735-2 6-104910-2 6-103639-2 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103908-3 6-104909-3 6-103669-3 6-103735-3 6-104910-3 6-103639-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103908-4 6-104909-4 6-103669-4 6-103735-4 6-104910-4 6-103639-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103908-5 6-104909-5 6-103669-5 6-103735-5 6-104910-5 6-103639-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103908-6 6-104909-6 6-103669-6 6-103735-6 6-104910-6 6-103639-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103908-7 6-104909-7 6-103669-7 6-103735-7 6-104910-7 6-103639-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103908-8 6-104909-8 6-103669-8 6-103735-8 6-104910-8 6-103639-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103908-9 6-104909-9 6-103669-9 6-103735-9 6-104910-9 6-103639-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103908-0 7-104909-0 7-103669-0 7-103735-0 7-104910-0 7-103639-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103908-1 7-104909-1 7-103669-1 7-103735-1 7-104910-1 7-103639-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103908-2 7-104909-2 7-103669-2 7-103735-2 7-104910-2 7-103639-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103908-3 7-104909-3 7-103669-3 7-103735-3 7-104910-3 7-103639-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103908-4 7-104909-4 7-103669-4 7-103735-4 7-104910-4 7-103639-4 M T E Notes: 1. Selectively loaded headers are available, consult Tyco Electronics. H 2. Use Keying Tool No. 91417-1to remove post for keying. ea d e rs 5 Note:All part numbers are RoHS compliant. 245 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square With Holddown Right-Angle Post .535 [13.59] Position No. 1 Indicator A B C .100 .230 MHoautseinriga—l a nBldac Fk itnheirsmhoplastic, [.10.6502] [.21.0504] Typ. X [2.54[].52.0008] [5.84] (C[o.52n.00ta08c] tR Aerfe.a) 94V-0 rated Posts— Brass, plated as follows: .275 [6.99] Plating A— Duplex plated .000030 .365 [9.27] [0.00076] gold on contact area, .000100 .120 .130 [0.00254] min. tin on solder area, with [3.05] [3.30] entire post underplated .000050 [0.00127] nickel .060 X .350 .145 [1.52] .134±.003 Dia. [8.89] [3.68] Plating B— Duplex plated .000015 [3.40±0.08] [0.00038] gold on contact area, .000100 (2 Plc.) Section X-X [0.00254] min. tin on solder area, with entire post underplated .000050 ders [P0l.a0t0i1n2g7 C] n—ick e.0l00100 [0.00254] tin [.83.4604±±.00.0038] Typ. .[120.504*] Typ. [.10.5450±±.00.0038] Typ. a e over .000050 [0.00127] nickel on entire TE H post [.00.3859±±.00.0038] Dia. Typ. M C Recommended PC Board Hole Layout (PC board thickness (for Holddown Feature) is .062±.008[1.57±0.20]) *±.003 [±0.08]; tolerance not to accumulate within one connector pattern. 5 Without Holddown .535 [13.59] Related Product Data Position No. 1 Indicator Mateable AMPMODU MTE A Products— B .060 .230 Receptacle Assemblies [1.52] C [5.84] (RLeactecphtiancgl)e— As psaegmesb 2li3e0s, 2w3i1th Guide [.21.0504] Typ. X [.21.0504] (C[o.52n.00ta08c] tR Aerfe.a) Ribs (installed in Single-Row Coupling Shroud)— .200 .275 pages 232, 233, 235, 240 [5.08] [6.99] .130 Technical Documents — .120 [3.30] pages 277, 278 [3.05] X .350 .145 Product Specification [.10.6502] [8.89] [3.68] 108-25034 C Section X-X .100* Application Specification [2.54] Typ. 114-25026 .035±.003 Dia. Typ. [0.89±0.08] Recommended PC Board Hole Layout *±.003 [±0.08]; tolerance not to accumulate within one connector pattern. 246 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline(Continued) No. of Dimensions Latching Header With Hold Down Latching Header Without Hold Down Pos. A B C Plating A Plating B Plating C Plating A Plating B Plating C 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-103904-1 5-103673-1 5-103672-1 5-104935-5 5-103635-1 5-103634-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-103904-2 5-103673-2 5-103672-2 5-104935-3 5-103635-2 5-103634-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-103904-3 5-103673-3 5-103672-3 5-104935-1 5-103635-3 5-103634-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-103904-4 5-103673-4 5-103672-4 5-104935-6 5-103635-4 5-103634-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-103904-5 5-103673-5 5-103672-5 5-104935-7 5-103635-5 5-103634-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-103904-6 5-103673-6 5-103672-6 5-104935-8 5-103635-6 5-103634-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-103904-7 5-103673-7 5-103672-7 5-104935-2 5-103635-7 5-103634-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-103904-8 5-103673-8 5-103672-8 5-104935-9 5-103635-8 5-103634-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-103904-9 5-103673-9 5-103672-9 6-104935-0 5-103635-9 5-103634-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-103904-0 6-103673-0 6-103672-0 6-104935-1 6-103635-0 6-103634-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-103904-1 6-103673-1 6-103672-1 5-104935-4 6-103635-1 6-103634-1 13 1.400 [35.56] 1.320 [33.53] 1.200 [30.48] 6-103904-2 6-103673-2 6-103672-2 6-104935-2 6-103635-2 6-103634-2 14 1.500 [38.10] 1.420 [36.07] 1.300 [33.02] 6-103904-3 6-103673-3 6-103672-3 6-104935-3 6-103635-3 6-103634-3 15 1.600 [40.64] 1.520 [38.61] 1.400 [35.56] 6-103904-4 6-103673-4 6-103672-4 6-104935-4 6-103635-4 6-103634-4 16 1.700 [43.18] 1.620 [41.15] 1.500 [38.10] 6-103904-5 6-103673-5 6-103672-5 6-104935-5 6-103635-5 6-103634-5 17 1.800 [45.72] 1.720 [43.69] 1.600 [40.64] 6-103904-6 6-103673-6 6-103672-6 6-104935-6 6-103635-6 6-103634-6 18 1.900 [48.26] 1.820 [46.23] 1.700 [43.18] 6-103904-7 6-103673-7 6-103672-7 6-104935-7 6-103635-7 6-103634-7 19 2.000 [50.80] 1.920 [48.77] 1.800 [45.72] 6-103904-8 6-103673-8 6-103672-8 6-104935-8 6-103635-8 6-103634-8 20 2.100 [53.34] 2.020 [51.31] 1.900 [48.26] 6-103904-9 6-103673-9 6-103672-9 6-104935-9 6-103635-9 6-103634-9 21 2.200 [55.88] 2.120 [53.85] 2.000 [50.80] 7-103904-0 7-103673-0 7-103672-0 7-104935-0 7-103635-0 7-103634-0 22 2.300 [58.42] 2.220 [56.39] 2.100 [53.34] 7-103904-1 7-103673-1 7-103672-1 7-104935-1 7-103635-1 7-103634-1 23 2.400 [60.96] 2.320 [58.93] 2.200 [55.88] 7-103904-2 7-103673-2 7-103672-2 7-104935-2 7-103635-2 7-103634-2 24 2.500 [63.50] 2.420 [61.47] 2.300 [58.42] 7-103904-3 7-103673-3 7-103672-3 7-104935-3 7-103635-3 7-103634-3 25 2.600 [66.04] 2.520 [64.01] 2.400 [60.96] 7-103904-4 7-103673-4 7-103672-4 7-104935-4 7-103635-4 7-103634-4 M Notes: 1. Selectively loaded headers are available, consult Tyco Electronics. T 2. Use Keying Tool No. 91417-1to remove post for keying. E H e a d e rs 5 Note:All part numbers are RoHS compliant. 247 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Shrouded Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With Swaged Tails and PC Board Orientation) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator .060 A Material and Finish [1.52] B (2 Plc.) Housing— Black thermoplastic, C .070 94V-0 rated [1.78] .120 Posts— Brass, plated .000100 [3.05] X .100 [0.00254] tin over .000050 [0.00127] [2.54] nickel on entire post .200 .260 [.10.5207] [5.08] [6.60] Dia. Related Product Data .060 X .050 Mateable AMPMODU MTE [1.52] .100 [1.27] Products— [2.54] Typ. Receptacle Assemblies (Polarized/Latching)— s .230 der pages 230, 231 .065±.003 Dia. [5.84] [.31.3300] a Receptacle Assemblies with Guide [1.65±0.08] e C H Ribs (installed in Single-Row MTE Coupling Shroud)— [.21.0504*]Typ. .135±.003 pages 232, 233, 235, 240 [3.43±0.08] .075±.003 Technical Documents — [1.91±0.08] .350 pages 277, 278 .040±.003Dia. Typ. [8.89] [1.02±0.08] 5 Product Specification (for Retention Tails) Section X-X 108-25034 Recommended PC Board Hole Layout Application Specification *±.003 [±0.08]; tolerances not to accumulate within one connector pattern. 114-25026 Note:Swaged retention tails are provided in a minimum of two locations per header. No. of Dimensions Latching Pos. A B C Header 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104450-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104450-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104450-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104450-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104450-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104450-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104450-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104450-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104450-9 Note:All part numbers are RoHS compliant. 248 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Through-hole, Surface Mount Compatible, Shrouded Polarized/Latching, Single-Row .100 [2.54] Centerline .025 [0.64] Square Straight Post (With Swaged Tails and PC Board Orientation) .535 [13.59] Swaged Retention Tail (See Note) Position No. 1 Indicator A B .230 Material and Finish C .100 [5.84] Housing— Black thermoplastic, .060 [2.54] .200 Ref. [1.52] [5.08] 94V-0 rated X (Contact Area) Posts— Brass, duplex plated .000015 [0.00038] gold on contact area, .000100 .262 [0.00254] min tin on solder tail, with [6.65] entire post underplated .000050 [0.00127] nickel [.31.2005].060 [.21.0504]Typ. [.52.0008] [.83.5809] .130 [1.52] X [3.30] Related Product Data Section X-X Mateable AMPMODU MTE M Products— T Receptacle Assemblies with Guide [.21.0504*]Typ. [.10.4002±±.00.0025] Typ. E He RCoibusp l(iinngst Salhlerodu idn) S—in gle-Row [.41.8507±±.00.0025] [.10.6655±±.00.0038] .135±.003 aders pages 232, 233, 235, 240 [3.43±0.08] Receptacle Assemblies (Polarized Latching)— pages 230, 231 [.10.4002±±.00.0038]Dia. Typ. .020±.002 5 [0.51±0.05] Plated-Thru Hole Typ. Technical Documents — Header Profile (Shown for .075±.003 pages 277, 278 orientation purposes only) [1.90±0.08] Product Specification Recommended PC Board Hole Layout 108-25034 (Stencil Thickness = .010 [0.25]) Application Specification *±.003 [±0.08] tolerance not to accumulate within one connector pattern 114-25026 No. of Dimensions Polarized/Latching Pos. A B C Header, High-Temp 2 .300 [7.62] .220 [5.59] .100 [2.54] 5-104809-1 3 .400 [10.16] .320 [8.13] .200 [5.08] 5-104809-2 4 .500 [12.70] .420 [10.67] .300 [7.62] 5-104809-3 5 .600 [15.24] .520 [13.21] .400 [10.16] 5-104809-4 6 .700 [17.78] .620 [15.75] .500 [12.70] 5-104809-5 7 .800 [20.32] .720 [18.29] .600 [15.24] 5-104809-6 8 .900 [22.86] .820 [20.83] .700 [17.78] 5-104809-7 9 1.000 [25.40] .920 [23.37] .800 [20.32] 5-104809-8 10 1.100 [27.94] 1.020 [25.91] .900 [22.86] 5-104809-9 11 1.200 [30.48] 1.120 [28.45] 1.000 [25.40] 6-104809-0 12 1.300 [33.02] 1.220 [30.99] 1.100 [27.94] 6-104809-1 Note:All part numbers are RoHS compliant. 249 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Polarized/Latching, Through-Hole, Surface Mount Compatible, Single-Row, .100 [2.54] Centerline .025 [0.64] Square Right-Angle Post (With Holddown) .535 [13.59] Position No. 1 Indicator .230 A [5.84] .060 [1.52] B (2 Plc.) C .100 .200 MHoautseinriga—l a nBlda cFk itnheisrmhoplastic, [.31.2005] .[120.504] Typ. X [2.54] (C[o5n.0ta8c] tR Aerfe.a) 94V-0 rated .262 .200 [6.65] Posts— Brass, duplex plated .000015 [5.08] [0.00038] gold on contact area, .000100 [0.00254] min. tin on solder tail, with [.41.8507] [.31.4658] entire post underplated .000050 .060 [0.00127] nickel [1.52] X .350 [8.89] .145 [3.68] Section X-X Related Product Data .093+-..000003Dia. ers MPraotdeuacbtlse— AM PMODU MTE [2..(002.399 P633+l-c.0.0).0008] ad Receptacle Assemblies (Polarized/ He Latching)— pages 230, 231 MTE RReibcse p(itnasctlael lAesds ienm Sbilnigelse w-Ritohw Guide [.83.4604±±.00.0038] .[120.504*] Typ. [.20.9209±±.00.0025] Coupling Shroud)— pages 232, 233, 235, 240 .070±.002 Typ. .035±.003 [1.78±0.51] .058±.003 [0.89±0.08]Dia. Typ. C [1.47±0.08] 5 Technical Documents — Plated-Thru Hole (2 Plc.) Recommended PC Board pages 277, 278 (Stencil Thickness = .010 [0.25]) Product Specification *±.003 [±0.08]; tolerance is not to accumulate within one connector pattern. 108-25034 Application Specification 114-25026 No. of Dimensions Right-Angle No. of Dimensions Right-Angle Header Header Pos. A B C with Hold Down Pos. A B C with Hold Down 2 .300[7.62] .220[5.59] .100[2.54] 5-104361-1 14 1.500[38.10] 1.420[36.07] 1.300[33.02] 6-104361-3 3 .400[10.16] .320[8.13] .200[5.08] 5-104361-2 15 1.600[40.64] 1.520[38.61] 1.400[35.56] 6-104361-4 4 .500[12.70] .420[10.67] .300[7.62] 5-104361-3 16 1.700[43.18] 1.620[41.15] 1.500[38.10] 6-104361-5 5 .600[15.24] .520[13.21] .400[10.16] 5-104361-4 17 1.800[45.72] 1.720[43.69] 1.600[40.64] 6-104361-6 6 .700[17.78] .620[15.75] .500[12.70] 5-104361-5 18 1.900[48.26] 1.820[46.23] 1.700[43.18] 6-104361-7 7 .800[20.32] .720[18.29] .600[15.24] 5-104361-6 19 2.000[50.80] 1.920[48.77] 1.800[45.72] 6-104361-8 8 .900[22.86] .820[20.83] .700[17.78] 5-104361-7 20 2.100[53.34] 2.020[51.31] 1.900[48.26] 6-104361-9 9 1.000[25.40] .920[23.37] .800[20.32] 5-104361-8 21 2.200[55.88] 2.120[53.85] 2.000[50.80] 7-104361-0 10 1.100[27.94] 1.020[25.91] .900[22.86] 5-104361-9 22 2.300[58.42] 2.220[56.39] 2.100[53.34] 7-104361-1 11 1.200[30.48] 1.120[28.44] 1.000[25.40] 6-104361-0 23 2.400[60.96] 2.320[58.93] 2.200[55.88] 7-104361-2 12 1.300[33.02] 1.220[30.99] 1.100[27.94] 6-104361-1 24 2.500[63.50] 2.420[61.47] 2.300[58.42] 7-104361-3 13 1.400[35.56] 1.320[33.53] 1.200[30.48] 6-104361-2 25 2.600[66.04] 2.520[64.01] 2.400[60.96] 7-104361-4 Note:All part numbers are RoHS compliant. 250 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Right-Angle, Polarized/Latching, Surface Mount .025 E [0.64] Typ. .120 .136±.001 [3.05] [3.45±0.02] 2 Plc Ø.085±.002 .140 [2.16±0.05] [3.56] .065 Min Pad on [1.65] Underside 2 Plc .535 .190±.001 Material and Finish [13.59] .265 [4.83±0.02] [6.73] 2 Plc Housing— Black thermoplastic, 94V-0 .165±.003 [4.19±0.07] + .002 rated Ø .047 -.003 .133 [ + 0.05] PPolasttisng— A B—ras Ds,u ppllaetxe dp laaste fdo l.l0o0w0s0:30 Position No. 1 Indicator .070±.002 Typ[3.38] (P1la.t1e9d -t h0r.0u7 hole) [.00076] gold on contact area, .000100 A [1.78±0.05] C .038 2 Plc [0.97] [.00254] min. tin on solder area, with Recommended PC Board Layout entire post underplated .000050 .350 [.00127] nickel. B [8.89] Plating B— Duplex plated .000015 K .120 [.52.0008] Ref [.00038] gold on contact area, .000100 [3.05] Contact Area [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating C— .000100 [.00254] tin over .262 .000050 [.00127] nickel on entire post [6.65] .200 K C [5.08] [.00.0025] [1.415.671] See L Recommended Ref (Tangent PC Board Layout of heel) (Refer to MTE Application Spec. D .076 Section K-K [1.93] 114-25026 for Stencil Aperture Layout M T Using .006 [0.152] or .008 [0.203] E H Stencil Thickness) e a d e Related Product Data rs .288 Mateable AMPMODU MTE [7.32] Products— Ref .054/.039 Receptacle Assemblies (Polarized/ [1.37/0.99] Latching)— pages 230, 231 View L 5 .140±.002 Receptacle Assemblies with Guide [3.56±0.05] Ribs (installed in Single-Row Coupling Shroud)— pages 232, 233, No. of Dimensions Right-Angle Latching SMT Headers 235, 240 Pos. A B C D E Plating A Plating B Plating C 2 .400[10.16] .220[5.59] .100[2.54] .140[3.56] .290[7.37] 5-147323-1 5-147278-1 5-147324-1 Technical Documents — 3 .500[12.70] .320[8.13] .200[5.08] .190[4.83] .390[9.91] 5-147323-2 5-147278-2 5-147324-2 pages 277, 278 4 .600[15.24] .420[10.67] .300[7.62] .240[6.10] .490[12.45] 5-147323-3 5-147278-3 5-147324-3 5 .700[17.78] .520[13.21] .400[10.16] .290[7.37] .590[14.99] 5-147323-4 5-147278-4 5-147324-4 Product Specification 108-25034 6 .800[20.32] .620[15.75] .500[12.70] .340[8.64] .690[17.53] 5-147323-5 5-147278-5 5-147324-5 7 .900[22.86] .720[18.29] .600[15.24] .390[9.91] .790[20.07] 5-147323-6 5-147278-6 5-147324-6 Application Specification 114-25026 8 1.000[25.40] .820[20.83] .700[17.78] .440[11.18] .890[22.61] 5-147323-7 5-147278-7 5-147324-7 9 1.100[27.94] .920[23.37] .800[20.32] .490[12.45] .990[25.15] 5-147323-8 5-147278-8 5-147324-8 10 1.200[30.48] 1.020[25.91] .900[22.86] .540[13.72] 1.090[27.69] 5-147323-9 5-147278-9 5-147324-9 11 1.300[33.02] 1.120[28.45] 1.000[25.40] .590[14.99] 1.190[30.23] 6-147323-0 6-147278-0 6-147324-0 12 1.400[35.56] 1.220[30.99] 1.100[27.94] .640[16.26] 1.290[32.77] 6-147323-1 6-147278-1 6-147324-1 13 1.500[38.10] 1.320[33.53] 1.200[30.48] .690[17.53] 1.390[35.31] 6-147323-2 6-147278-2 6-147324-2 14 1.600[40.64] 1.420[36.07] 1.300[33.02] .740[18.80] 1.490[37.85] 6-147323-3 6-147278-3 6-147324-3 15 1.700[43.18] 1.520[38.61] 1.400[35.56] .790[20.07] 1.590[40.39] 6-147323-4 6-147278-4 6-147324-4 16 1.800[45.72] 1.620[41.15] 1.500[38.10] .840[21.34] 1.690[42.93] 6-147323-5 6-147278-5 6-147324-5 17 1.900[48.26] 1.720[43.69] 1.600[40.64] .890[22.61] 1.790[45.47] 6-147323-6 6-147278-6 6-147324-6 18 2.000[50.80] 1.820[46.23] 1.700[43.18] .940[23.88] 1.890[48.01] 6-147323-7 6-147278-7 6-147324-7 19 2.100[53.34] 1.920[48.77] 1.800[45.72] .990[25.15] 1.990[50.55] 6-147323-8 6-147278-8 6-147324-8 20 2.200[55.88] 2.020[51.31] 1.900[48.26] 1.040[26.42] 2.090[53.09] 6-147323-9 6-147278-9 6-147324-9 21 2.300[58.42] 2.120[53.85] 2.000[50.80] 1.090[27.69] 2.190[55.63] 7-147323-0 7-147278-0 7-147324-0 22 2.400[60.96] 2.220[56.39] 2.100[53.34] 1.140[28.96] 2.290[58.17] 7-147323-1 7-147278-1 7-147324-1 23 2.500[63.50] 2.320[58.93] 2.200[55.88] 1.190[30.23] 2.390[60.71] 7-147323-2 7-147278-2 7-147324-2 Note:All part numbers are RoHS 24 2.600[66.04] 2.420[61.47] 2.300[58.42] 1.240[31.50] 2.490[63.25] 7-147323-3 7-147278-3 7-147324-3 compliant. 25 2.700[68.58] 2.520[64.01] 2.400[60.96] 1.290[32.77] 2.590[65.79] 7-147323-4 7-147278-4 7-147324-4 251 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MTE Headers, Vertical, Polarized/Latching, Surface Mount E .025 Typ. .075 [0.62] [1.90] .535 [13.59] Material and Finish .313 .063 Housing— Black thermoplastic, 94V-0 [7.62] Position No. 1 Indicator [1.52] rated A PPolasttisng— A B—ras Ds,u ppllaetxe dp laaste fdo l.l0o0w0s0:30 [.00.2654] Typ. B K [.52.3804] [.00076] gold on contact area, .000100 [.00254] min. tin on solder area, with entire post underplated .000050 [.00127] nickel. Plating B— Duplex plated .000015 .100 K .120 [2.54] [3.05] Pick and Place Cap [.00038] gold on contact area, .000100 .200 [.00254] min. tin on solder area, with Section K-K [5.08] entire post underplated .000050 .100 Typ. [.00127] nickel. [2.54] .055±.003 ers Popvoleasrtt i.n0g00 C05—0 [ ..0000102170]0 n[i.c0k0e2l5 o4n] etinnt ire Ø[ .10.5322++–– ..0000..00002357] [1.40±0.08] [.20.8285±±.00.0038] ad Plated Thru-Hole e E H Recommended MT PC Board Layout (Refer to MTE Application Spec. Ø .070±.002 .113 .227 114-25026 for Stencil Aperature Layout [1.78±0.05] [2.88] [5.76] using .006 [0.152] or .008 [0.203] C 0.06 stencil thickness D [1.53] 5 Position No. 1 Recommended PC Board Layout Related Product Data Mateable AMPMODU MTE No. of Dimensions Vertical SMT Headers Products— Pos. A B C D E Plating A Plating B Plating C Receptacle Assemblies (Polarized/ 2 .300[7.62] .220[5.59] .100[2.54] .220[5.60] .110[2.80] 5-1375583-1 5-1375582-1 5-1375549-1 Latching)— pages 230, 231 3 .400[10.16] .320[8.13] .200[5.08] .320[8.14] .160[4.07] 5-1375583-2 5-1375582-2 5-1375549-2 Receptacle Assemblies with Guide 4 .500[12.70] .420[10.67] .300[7.62] .420[10.68] .210[5.34] 5-1375583-3 5-1375582-3 5-1375549-3 Ribs (installed in Single-Row 5 .600[15.24] .520[13.21] .400[10.16] .520[13.22] .260[6.61] 5-1375583-4 5-1375582-4 5-1375549-4 Coupling Shroud)— pages 232, 233, 6 .700[17.78] .620[15.75] .500[12.70] .620[15.76] .310[7.88] 5-1375583-5 5-1375582-5 5-1375549-5 235, 240 7 .800[20.32] .720[18.29] .600[15.24] .720[18.30] .360[9.15] 5-1375583-6 5-1375582-6 5-1375549-6 8 .900[22.86] .820[20.83] .700[17.78] .820[20.84] .410[10.42] 5-1375583-7 5-1375582-7 5-1375549-7 Technical Documents — 9 1.000[25.40] .920[23.37] .800[20.32] .920[23.38] .460[11.69] 5-1375583-8 5-1375582-8 5-1375549-8 pages 277, 278 10 1.100[27.94] 1.020[25.91] .900[22.86] 1.020[25.92] .510[12.96] 5-1375583-9 5-1375582-9 5-1375549-9 Product Specification 11 1.200[30.48] 1.120[28.45] 1.000[25.40] 1.120[28.46] .560[14.23] 6-1375583-0 6-1375582-0 6-1375549-0 108-25034 12 1.300[33.02] 1.220[30.99] 1.100[27.94] 1.220[31.00] .610[15.50] 6-1375583-1 6-1375582-1 6-1375549-1 Application Specification 13 1.400[35.56] 1.320[33.53] 1.200[30.48] 1.320[33.54] .660[16.77] 6-1375583-2 6-1375582-2 6-1375549-2 114-25026 14 1.500[38.10] 1.420[36.07] 1.300[33.02] 1.420[36.08] .710[18.04] 6-1375583-3 6-1375582-3 6-1375549-3 15 1.600[40.64] 1.520[38.61] 1.400[35.56] 1.520[38.62] .760[19.31] 6-1375583-4 6-1375582-4 6-1375549-4 16 1.700[43.18] 1.620[41.15] 1.500[38.10] 1.620[41.16] .810[20.58] 6-1375583-5 6-1375582-5 6-1375549-5 17 1.800[45.72] 1.720[43.69] 1.600[40.64] 1.720[43.70] .860[21.85] 6-1375583-6 6-1375582-6 6-1375549-6 18 1.900[48.26] 1.820[46.23] 1.700[43.18] 1.820[46.24] .910[23.12] 6-1375583-7 6-1375582-7 6-1375549-7 19 2.000[50.80] 1.920[48.77] 1.800[45.72] 1.920[48.78] .960[24.39] 6-1375583-8 6-1375582-8 6-1375549-8 20 2.100[53.34] 2.020[51.31] 1.900[48.26] 2.020[51.32] 1.010[25.66] 6-1375583-9 6-1375582-9 6-1375549-9 21 2.200[55.88] 2.120[53.85] 2.000[50.80] 2.120[53.86] 1.060[26.93] 7-1375583-0 7-1375582-0 7-1375549-0 22 2.300[58.42] 2.220[56.39] 2.100[53.34] 2.220[56.40] 1.110[28.20] 7-1375583-1 7-1375582-1 7-1375549-1 23 2.400[60.96] 2.320[58.93] 2.200[55.88] 2.320[58.94] 1.160[29.47] 7-1375583-2 7-1375582-2 7-1375549-2 24 2.500[63.50] 2.420[61.47] 2.300[58.42] 2.420[61.48] 1.210[30.74] 7-1375583-3 7-1375582-3 7-1375549-3 Note:All part numbers are RoHS 25 2.600[66.04] 2.520[64.01] 2.400[60.96] 2.520[64.02] 1.260[32.01] 7-1375583-4 7-1375582-4 7-1375549-4 compliant. 252 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Interchangeable Contacts, Wire Crimp (Snap-In) Material and Finish Short Point Receptacles Copper alloy C7025, plated as follows: .068 [1.73] Plating A — Duplex plated .000030 [0.00076] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating B — Duplex plated .000015 [0.00038] min. gold on contact area, .000050 [0.00127] min. tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel Plating C — .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .060 on entire contact .460 [1.52] [11.68] C C Keying Plug Part No. 104072-1 Ten plugs are supplied per strip. Order quantity reflects the number of strips required. .012 M [0.30] T Gap E H e a d e rs Section C - C Extraction/Lance Reset 5 Tool No. 843477-1 Related Product Data Technical Documents — pages 277, 278 Performance Characteristics — page 221 Product Specification Housings used in — 108-1472, 108-1472-1 Short Point—pages 223, 224 Application Specification AMPMODU MTE Unloaded 114-25038 Housings — pages 228-233 Application Tooling— pages 270-272 WRiraen Sgieze DInisa.. Finish (SCtaonndtaarcdt PParerts Nsuor.e) HeAaMAvypP pD-Oluic-tLayEt MoCriT nfoRiarItCure SAtArMipppPpl-eiOcra/-CMtorAirm TfoIpCrer HTaonodl AWG [mm2] Range Strip Form Loose Piece Machine* Machine Nos. Plating A 1-104481-1 1-104481-3 .025-.060 32-28 0.03-0.08 0.64-1.52 Plating B 1-104481-0 1-104481-2 567296-2 466980-1 91518-1 Plating C 5-104481-2 5-104481-6 Plating A 1-104480-3 1-104480-6 .025-.060 26-22 0.13-0.3 Plating B 1-104480-2 1-104480-5 567297-2 466981-1 91518-1 0.64-1.52 Plating C 1-104480-7 1-104480-4 Plating A 1-104479-0 1-104479-3 .025-.060 24-20 0.2-0.5 Plating B 104479-9 1-104479-2 567298-2 466982-1 91551-1 0.64-1.52 Plating C 104479-8 1-104479-1 *For use with Model “K” machines. Call the Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Note:These wire crimp contacts can be intermixed with insulation displacement crimp contacts. Note:All part numbers are RoHS compliant. 253 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Interchangeable Contacts, Wire Crimp (Snap-In) (Continued) Material and Finish Pins Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000030 [0.00076] min. tin in crimp area, with entire contact underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000030 [0.00076] min. tin on solder area, with entire contact underplated .000050 [0.00127] nickel .025 Plating C — .000100 [0.00254] tin [0.64] over .000050 [0.00127] nickel on entire contact .025 [0.64] Extraction/Lance Reset Tool No. 843477-1 s act Related Product Data .810 nt [20.57] Co Performance Characteristics — E page 221 T M AMPMODU MTE Unloaded Housings — pages 228-233 Application Tooling — pages 270-272 5 Technical Documents — pages 277, 278 Product Specification 108-25034 Application Specification 114-25026 Contact Applicator for WRiraen Sgieze InRsa.n Dgiea. Finish (StandPaardrt PNroe.ssure) Mfoirn iAaHMteuParev-O yA -DLpEuptlCiycT aRtoICr AMSPt-rOip-pMeArT/IC HTaonodl AWG [mm2] Strip Loose Crimper Nos. Machine* Form Piece Machine Plating A 5-104506-6 5-104506-7 .025-.054 32-28 0.03-0.08 0.64-1.37 Plating B 5-104506-4 5-104506-5 — — 58342-2 Plating C 5-104506-2 5-104506-3 Plating A 5-104505-6 5-104505-7 .036-.054 26-22 0.14-0.32 0.91-1.37 Plating B 5-104505-4 5-104505-5 567239-2 466983-1 91531-1 Plating C 5-104505-2 5-104505-3 *For use with AMP-O-LECTRIC Model “K” machines. Call Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Note:These wire crimp contacts can be intermixed with insulation displacement crimp contacts. Note:All part numbers are RoHS compliant. 254 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MT and Shielded MT Interconnection System Product Facts ■ Full line of mass termination tooling offers lowest installed cost for most production needs ■ Dual cantilever beams with anti-overstress features provide redundant contact of mating post and limit beam deflection, preventing permanent deformation ■ Redundant insulation displacement slots provide for maximum reliability ■ Integral wire strain relief on contact can prevent wire Typical Application of End-to-End Stacking motion from being transmitted to wire termination areas Wire-to-Board 5-102398-8 D-R Assembly ■ Built-in contact post stop 102396-8 Hermaphroditic Covers 5-102398-8 D-R Assembly can protect terminated wire 102540-8 Polarizing Cover from being disturbed by 5-102398-8 D-R Assembly 102536-8 Back Cover over-insertion of mating 102537-8 Ejection Cover pepoonssteitt,ri ivpnergel yvc eolinnmttsai tcwst imarerae tfairn oagmnd 1025361-80 2B1a8c5k- 2C Lovaetcrh 5-111000222553439168---888 NBDao-Rcnk- AP Csooslaveremizr binlyg Cover InterconneMT and S ■ cInosnunleactitoonr ddeispptlhacement 5102154-4 Header 5-103168-8 Hdr ction Shielde csonnatpa-cints c aonndta ccrtism apr,e 5-110022638918--58 LDa-Rtc hAinsgs eCmobvleyr 5-103166-8 Header ystemd MT interchangeable 102536-8 Back Cover 5-103166-8 Header ■ Complete serviceability 5-102398-8 D-R Assembly 5 with replacement contacts 102396-8 Hermaphroditic Covers ■ Cover styles include low profile (polarized, non-polarized, latching and ejection) and standard profile (hermaphroditic The AMPMODU MT and system, features a mating Performance and ejection) Shielded MT Interconnection interface that is the same as Characteristics System offers labor and the conventional AMPMODU ■ Connector housings may Contact Current Rating — cost savings through mass crimp, snap-in contact, fea- be stacked end-to-end 3 amperes for single contact in free air. termination technology, turing dual cantilever beams, within one pair of covers. (Amperage could vary due to ambient while maintaining the time- built-in overstress protection All varieties of covers in temperature, wire size and duty cycles.) proven reliability of the and a completely enclosed this catalog are suitable for Operating Temperature — AMPMODU product family. “box” design. multiple housing stacking -65°C to +105°C The MT system is comprised applications similar to the To reduce EMI/ESD (electro- Termination Resistance — of preloaded, double-row example illustrated in the magnetic interference/ 12 milliohms max. receptacle assemblies with photograph to the right electrostatic discharge) at Max. Mating Force — snap-on covers and a variety the input-output interface, High pressure - 26 oz. [7.23 N] ■ Recognized under the of shielding hardware and add-on metal shields can be Standard pressure - 9 oz. [2.50 N] Component Program of accessories. The system is used to convertstandard Min. Unmating Force — Underwriters supported by a full line of MT connectors to shielded High pressure — 5 oz. [1.39 N] Laboratories Inc., mass termination tooling to MT connectors. Standard pressure — 1.5 oz. [0.417 N] File No. E28476 R meet virtually most produc- Contact Retention in Housing — ■ Certified by Canadian tion needs. 5 lb. [22.24 N] per contact min. Standards The insulation displacement Association, R contact, the heart of the MT File No. LR 7189 Note:All part numbers are RoHS compliant. 255 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208a

AMPMODU Interconnection System MT Receptacle Assemblies, Double-Row .100 x .100 [2.54 x 2.54] Centerline Housings Pre-loaded with Contact Standard Pressure Contacts I.D. No. 1 1 1 1 1 1 .125 [3.18] .600 [15.24] .270 [6.86] 1 Circuit No. 1 A Max. Identifier Material and Finish Housing — Glass-filled thermoplastic, .070 black, 94V-0 rated [1.78] Right-Angle MT Receptacle .100 Header Assembly Contacts— Copper alloy, duplex .050 B [2.54] [1.27] plated .000030 [0.00076] gold in mating area, .000050 [0.00127] tin on solder tail, with entire contact underplated .240 .300 .000050 [0.00127] nickel [6.10] [7.62] Related Product Data .100 Typ. Mateable Connectors — pages 117, [2.54] BPoaCrd [.62.7806] s 122, 126, 130, 264 e bli Cable Insulation Wall m Thickness — .015 [0.39] max. Part Nos. (Stamped) e ss Cable Insulation Diameter — No. of Dimensions Wire Size Range Unloaded e A .050 [1.27] max. Pos. A B 30-26 AWG 26-22 AWG 22-20 AWG Housings acl Mating Post Length — [0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2] ept .222-.273 [5.64-6.94] max. 6 .300 [7.62] .200 [5.08] 5-102393-1 5-102398-1 5-102448-1 102394-1 Rec Performance Characteristics — 8 .400 [10.16] .300 [7.62] 5-102393-2 5-102398-2 5-102448-2 102394-2 T page 255 10 .500 [12.70] .400 [10.16] 5-102393-3 5-102398-3 5-102448-3 102394-3 M 12 .600 [15.24] .500 [12.70] 5-102393-4 5-102398-4 5-102448-4 102394-4 Replacement Contacts — page 265 14 .700 [17.78] .600 [15.24] 5-102393-5 5-102398-5 5-102448-5 102394-5 5 Connector Covers — 16 .800 [20.32] .700 [17.78] 5-102393-6 5-102398-6 5-102448-6 102394-6 pages 258, 259 18 .900 [22.86] .800 [20.32] 5-102393-7 5-102398-7 5-102448-7 102394-7 Application Tooling — 20 1.000 [25.40] .900 [22.86] 5-102393-8 5-102398-8 5-102448-8 102394-8 pages 273-275 22 1.100 [27.94] 1.000 [25.40] 5-102393-9 5-102398-9 5-102448-9 102394-9 24 1.200 [30.48] 1.100 [27.94] 6-102393-0 6-102398-0 6-102448-0 1-102394-0 Technical Documents— 26 1.300 [33.02] 1.200 [30.48] 6-102393-1 6-102398-1 6-102448-1 1-102394-1 pages 277, 278 28 1.400 [35.56] 1.300 [33.02] 6-102393-2 6-102398-2 6-102448-2 1-102394-2 Product Specification 30 1.500 [38.10] 1.400 [35.56] 6-102393-3 6-102398-3 6-102448-3 1-102394-3 108-25015, 108-25018, 108-25030 32 1.600 [40.64] 1.500 [38.10] 6-102393-4 6-102398-4 6-102448-4 1-102394-4 Application Specification 34 1.700 [43.18] 1.600 [40.64] 6-102393-5 6-102398-5 6-102448-5 1-102394-5 114-25032 40 2.000 [50.80] 1.900 [48.26] 6-102393-8 6-102398-8 6-102448-8 1-102394-8 Instruction Sheet 50 2.500 [63.50] 2.400 [60.96] 7-102393-3 7-102398-3 7-102448-3 2-102394-3 408-6532 60 3.000 [76.20] 2.900 [73.66] 7-102393-8 7-102398-8 7-102448-8 2-102394-8 64 3.200 [81.28] 3.100 [78.74] 8-102393-0 8-102398-0 8-102448-0 3-102394-0 Note:Contact Extraction/Lance Reset Tool No. 843477-3, see page 265. Keying Plugs Part No. 86286-1 (Plugs into receptacle contact) Part No. 87077-2 Material — Natural color nylon (Plugs directly into housing) Note:All part numbers are RoHS compliant. 256 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System MT Receptacle Assemblies, Double-Row .100 x .100 [2.54 x 2.54] Centerline (Continued) Housings Pre-loaded with Contact I.D. No. High Pressure Contacts 4 4 4 4 4 4 4 4 4 4 .125 [3.18] .600 [15.24] .270 [6.86] 1 Material and Finish A Max. Housing — Glass-filled thermoplastic, Circuit No. 1 black, 94V-0 rated Identifier Contacts — Copper alloy, duplex plated .000030 [0.00076] gold in mating area, .000050 [0.00127] tin on solder tails, with entire contact underplated .000050 [0.00127] nickel Right-Angle MT Receptacle .050 B .240 Header Assembly [1.27] [6.10] Related Product Data Mateable Connectors — pages 117, 122, 126, 130, 264 .300 M Cable Insulation Wall [7.62] T R Thickness — .015 [0.39] max. ec C.0a5b0 l[e1 .I2n7s]u mlaatxi.on Diameter — [.21.0504] Typ. [.21.0504] BPoaCrd [.62.7806] eptacle Mating Post Length — A s .200-.273 [5.64-6.94] max. s e Performance Characteristics — m b page 255 lie s Replacement Contacts — page 265 Connector Covers — 5 pages 258, 259 Part Nos. (Stamped*) Application Tooling — No. of Dimensions Wire Size Range pages 273-275 Pos. A B 30-26 AWG 26-22 AWG 22-20 AWG [0.05-0.15 mm2] [0.12-0.3 mm2] [0.3-0.6 mm2] 6 .300 [7.62] .200 [5.08] 5-102693-1 5-102694-1 5-102695-1 Technical Documents— 8 .400 [10.16] .300 [7.62] 5-102693-2 5-102694-2 5-102695-2 pages 277, 278 10 .500 [12.70] .400 [10.16] 5-102693-3 5-102694-3 5-102695-3 12 .600 [15.24] .500 [12.70] 5-102693-4 5-102694-4 5-102695-4 Product Specification 14 .700 [17.78] .600 [15.24] 5-102693-5 5-102694-5 5-102695-5 108-25015, 108-25018, 108-25030 16 .800 [20.32] .700 [17.78] 5-102693-6 5-102694-6 5-102695-6 Application Specification 18 .900 [22.86] .800 [20.32] 5-102693-7 5-102694-7 5-102695-7 114-25032 20 1.000 [25.40] .900 [22.86] 5-102693-8 5-102694-8 5-102695-8 Instruction Sheet *Cavity identification — first cavity (one side); Tyco Electronics Part No. and date code stamped on housing where size permits. 408-6532 Note:Contact Extraction/Lance Reset Tool No. 843477-3, see page 265. Keying Plugs Part No. 86286-1 (Plugs into receptacle contact) Part No. 87077-2 Material — Natural color nylon (Plugs directly into housing) Note:All part numbers are RoHS compliant. 257 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Low Profile Covers for Double-Row MT Receptacle Assemblies Material Front Covers Black thermoplastic, flame retardant A - Polarizing Cover B - Latching Cover (Mates with AMPMODU 4-sided shrouded (Mates with AMPMODU 4-sided shrouded headers. Refer to pages 117, 122, 126, 130.) headers with extraction slot. Refer to Related Product Data pages 117, 122, 126, 130.) For use on Double-Row MT Receptacle Assemblies — pages 256, 257 .750 .750 [19.05] [19.05] Technical Documents— pages 277, 278 Product Specification 108-25015, 108-25018, 108-25030 L Application Specification L 114-25032 Instruction Sheet 408-6532 Note: See page 259 for Low Profile C - Ejection Cover D - Non-Polarizing Cover Cover Part Nos. (Mates with AMP-LATCH universal ejection (Designed for use with shielded connectors, style pin headers equipped with latching pages 261 & 262; or for non-polarizing ears, Part No. 102185-2 (with push tabs) applications.) or Part No. 102312-2 (without push tabs), see Tyco Electronics Catalog 82012. s ver .750 o [19.05] C e Assembled* ofil [1.795.005] .480 w Pr [.20.9451] Typ. [12.19] o L T M 5 .150 [3.81] .468 *Dimension applies to cover when [11.89] installed on connector housing. Back Covers E - For Shielding and F - For Shielding Applications Non-Shielding Applications (For use with Non-Polarizing Cover only.) (For use with any low profile cover.) L L Note:All part numbers are RoHS compliant. 258 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Standard Profile Covers for Double-Row MT Receptacle Assemblies Material G - Hermaphroditic Cover H - Ejection Cover (Two hermaphroditic covers can be used or (Mates with AMP-LATCH universal ejection style Black thermoplastic, flame retardant one hermaphroditic cover can be used with pin headers equipped with latching ears, Part No. an H Ejection Cover.) 102185-2 (with push tabs) or Part No. 102312-2 (without push tabs), see Tyco Electronics Catalog Related Product Data 1.120 Assembled* 82012. [28.45] For use on Double-Row MT Receptacle Assemblies — pages 256, 257 .850 Top View Technical Documents— [21.59] 1.120 pages 277, 278 [28.45] Product Specification 108-25015, 108-25018, 108-25030 Application Specification .095 114-25032 [2.41] Instruction Sheet Typ. 408-6532 Bottom View .150 [3.81] .468 *Dimension applies to cover when [11.89] installed on connector housing. M L T S ta n d a rd P Low Profile Covers Standard Profile Covers ro Front Covers Back Covers file NPoo. so.f DimeLnsion PolaArizing LatcBhing EjecCtion Non-PoDlarizing NSohnie-lSdhEiniegl dainndg ApSphliiecFladtiinogns HermapGhroditic EjecHtion Covers Applications 6 .300 [7.62] 102540-1 — 102537-1 102541-1 102536-1 — 102396-1 — 5 8 .400 [10.16] 102540-2 — 102537-2 102541-2 102536-2 — 102396-2 — 10 .500 [12.70] 102540-3 — 102537-3 102541-3 102536-3 — 102396-3 — 12 .600 [15.24] 102540-4 102681-1 102537-4 102541-4 102536-4 102823-5 102396-4 — 14 .700 [17.78] 102540-5 102681-2 102537-5 102541-5 102536-5 102823-6 102396-5 — 16 .800 [20.32] 102540-6 102681-3 102537-6 102541-6 102536-6 102823-7 102396-6 — 18 .900 [22.86] 102540-7 102681-4 102537-7 102541-7 102536-7 102823-1 102396-7 — 20 1.000 [25.40] 102540-8 102681-5 102537-8 102541-8 102536-8 102823-4 102396-8 103268-6 22 1.100 [27.94] 102540-9 102681-6 102537-9 102541-9 102536-9 102823-8 102396-9 — 24 1.200 [30.48] 1-102540-0 102681-7 1-102537-0 1-102541-0 1-102536-0 102823-9 1-102396-0 103268-7 26 1.300 [33.02] 1-102540-1 102681-8 1-102537-1 1-102541-1 1-102536-1 1-102823-0 1-102396-1 103268-8 28 1.400 [35.56] 1-102540-2 102681-9 1-102537-2 1-102541-2 1-102536-2 1-102823-1 1-102396-2 — 30 1.500 [38.10] 1-102540-3 1-102681-0 1-102537-3 1-102541-3 1-102536-3 1-102823-2 1-102396-3 103268-9 32 1.600 [40.64] — 1-102681-1 1-102537-4 1-102541-4 1-102536-4 1-102823-3 1-102396-4 — 34 1.700 [43.18] — 1-102681-2 1-102537-5 1-102541-5 1-102536-5 1-102823-4 1-102396-5 1-103268-0 40 2.000 [50.80] — 1-102681-5 1-102537-8 1-102541-8 1-102536-8 102823-2 1-102396-8 — 50 2.500 [63.50] — 2-102681-0 2-102537-3 2-102541-3 2-102536-3 102823-3 2-102396-3 1-103268-3 60 3.000 [76.20] — — 2-102537-8 2-102541-8 2-102536-8 — 2-102396-8 — 64 3.200 [81.28] — — 3-102537-0 3-102541-0 3-102536-0 — 3-102396-0 — Note:All part numbers are RoHS compliant. 259 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Shielding Hardware and Accessories for MT Interconnection System Product Facts ■ Add-on shielding accessories for existing AMPMODU Standard MT and PC board mounted headers ■ Compact design ■ Tin plated copper alloy material ■ Redundant cantilever beams provide for good peripheral contact, eliminating the need for a separate RF gasket ■ Polarized mating ■ 360° cable braid termination with cable jacket support Shielded MT Receptacles ■ Cable shielding hardware permits molded cable terminations after assembly s e ■ Must be used with braided ori shielded cables s Shieldingand Acces ■ Shseeolalfd-dreeerrt tasaihbnisien logdn si n rai gareh P t-Ca nbgolaerd T e Mar w d ar H 5 Shielded Right-Angle Headers The shielded AMPMODU good peripheral contact Shields for right-angle MT system features add-on with the mating outer shell headers have integral metal shielding kits for half. This feature also cantilever beams which double-row standard MT eliminates the need for a provide good contact with receptacle assemblies and separate RF gasket. the mating shielded MT double-row right-angle Detents in the cantilever receptacle assembly, headers. beam provide a positive without the use of a lock when the two halves separate RF gasket. Cable shielding hardware are mated. During assembly consists of a ferrule and two the inner and outer shell stamped and formed shell halves are snapped halves. The inner shell half together over a terminated has a series of integral standard MT connector. cantilever beams to provide 260 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Shielding Hardware and Accessories for Double-Row MT Receptacle Assemblies Two-Piece Shields— Straight Exit Outer Shell Half Material and Finish Shell Halves — Copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. A Related Product Data C Double-Row MT Receptacle B Assemblies — pages 256, 257 Non-Polarizing Covers (Part No. Series 102541 with back cover .326 102536 or 102823) — [8.28] pages 258, 259 Shield Ferrules — page 263 Technical Documents— Ferrule Purchased separately pages 277, 278 (See page 263) Product Specification 108-25015, 108-25018, 108-25030 Flare braid over H assembled shells for a Application Specification Standard MT crimping under ferrule rd w 114-25032 Receptacle Assembly aM Instruction Sheet (RePfuerrc thoa psaegde sse 2p5a6ra &te 2ly57) re aT S 408-6532 nd Acceshielding s Inner Shell Half o rie s 5 Part Nos. No. of Dimensions Pos. A B C Outer Inner Shell Shell 6 .410 [10.41] .817 [20.75] 1.268 [32.21] 102988-2 102987-6 10 .610 [15.49] .817 [20.75] 1.667 [42.34] 103137-2 103136-2 16 .910 [23.11] .950 [24.13] 1.925 [48.90] 103153-2 103152-2 26 1.410 [35.81] .950 [24.13] 1.925 [48.90] 103341-2 103340-2 40 2.110 [53.59] 1.325 [33.66] 2.468 [62.69] 104272-1 104271-1 50 2.610 [66.29] .950 [24.13] 2.468 [62.69] 103158-2 103157-2 Note:Match shield size to number of connector positions. Note:All part numbers are RoHS compliant. 261 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Shielding Hardware and Accessories for Double-Row MT Receptacle Assemblies (Continued) Two-Piece Shields— Right-Angle Exit .125 Dia. [3.18] (See Note 2) C Material and Finish Outer Shell Half Shell Halves — Copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. Related Product Data A Double-Row MT Receptacle B Assemblies — pages 256, 257 Non-Polarizing Covers (Part No. Series 102541 with back cover 102536 or 102823) — Ferrule Purchased .326 pages 258, 259 separately [8.28] (See page 263) Shield Ferrules — page 263 Flare braid over Technical Documents— assembled shells for pages 277, 278 crimping under ferrule Product Specification s 108-25015, 108-25018, 108-25030 orie Application Specification RecSeptatancdlaer dA sMsTembly hieldingnd Access 1I4n10s48t--r26u55c03t32io2n Sheet (RePfuerrc thoa psaegde sse 2p5a6ra &te 2ly57) Sa T e Mar w d Inner Shell Half ar H 5 No. of Dimensions Part Nos. Pos. A B C Outer Shell Inner Shell 18 1.010 [25.65] 1.120 [28.45] 1.413 [35.89] 102784-2 102783-2 26 1.410 [35.81] 1.166 [29.62] 1.975 [50.17] 103139-2 103138-2 40 2.110 [53.59] 1.135 [28.83] 2.633 [66.88] 102786-2 102785-2 50 2.610 [66.29] .983 [24.97] 3.133 [79.58] 102788-2 102787-2 60 3.110 [78.99] 1.118 [28.40] 3.606 [91.59] 103141-2 103140-2 Notes:1. Match shield size to number of connector positions. 2. Hole is provided in 26 through 60-position cable shields for application of optional cable tie pull ring after assembly. Note:All part numbers are RoHS compliant. 262 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Shielding Hardware and Accessories for Double-Row MT Receptacle Assemblies (Continued) Ferrules for Shielding Kits Material and Finish Soft copper, tin plated Related Product Data Used with Shielding Kits — pages 261, 262 Technical Documents— pages 277, 278 Product Specification Application Tooling 108-25015, 108-25018, 108-25030 Application Specification 114-25032 Instruction Sheet 408-6532 H a rd w aM reT a S nh AMP-O-LECTRIC Model Tyco Electronics Hand Tool 91410-1 d Accesielding s “G” Terminating Machine (Die Set required, see table below) o rie s No. of Straight-Exit Shields Right-Angle Exit Shields Cable Dia. Ferrule Applicator Die* Hand Tool Die Sets Pos. Outer Inner Outer Inner Range Part Number Assembly Part No. Insulation Braid 5 6 102988-2 102987-6 — — 0.200-0.250 [5.08-6.35] 102985-4 812665-2 1-527116-8 527116-4 0.250-0.300[6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 10 103137-2 103136-2 — — 0.310-0.360[7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420[9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3 0.190-0.240[4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3 0.250-0.300[6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 16 103153-2 103152-2 — — 0.310-0.360[7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420[9.40-10.67] 5-102789-1 812665-3 1-527116-4 527116-3 0.190-0.240[4.83-6.10] 5-102903-3 812665-6 1-527116-7 527116-3 0.250-0.300[6.35-7.62] 5-102903-2 812665-5 1-527116-6 527116-3 18 — — 102784-2 102783-2 0.310-0.360[7.87-9.14] 5-102903-1 812665-4 1-527116-5 527116-3 0.370-0.420[9.40-10.67] 5-102903-1 812665-3 1-527116-4 527116-3 0.320-0.370[8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2 26 103341-2 103340-2 103139-2 103138-2 0.430-0.460[10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2 0.320-0.370[8.13-9.40] 5-102903-4 812665-9 1-527116-3 527116-2 40 104272-1 104271-1 102786-2 102785-2 0.430-0.460[10.92-11.68] 5-102789-2 812665-7 1-527116-1 527116-2 0.380-0.420[9.65-10.67] 5-102903-6 1-812665-5 1-527116-2 527116-1 50 103158-2 103157-2 102788-2 102787-2 0.430-0.460[10.92-11.68] 5-102903-5 1-812665-4 1-527116-1 527116-1 0.470-0.520[11.94-13.21] 5-102789-3 1-812665-3 1-527116-0 527116-1 0.470-0.520[11.94-13.21] 5-102903-8 1-812665-8 — — 60 — — 103141-2 103140-2 0.500-0.545[12.70-13.84] 5-102903-7 1-812665-7 — — 0.550-0.600[13.97-15.24] 5-102789-4 1-812665-6 — — *For use with Model “K” machines. Call the Tyco Electronics Technical Support Center (1-800-522-6752) for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (also shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Notes: 1. Ferrules are used with shielding kits shown on pages 261 & 262, and are purchased separately. 2. Individual anvils and crimpers also may be purchased separately. 3. Ferrule Part Number 1-102903-8 also requires Spacer Part Number 527116-9. Note:All part numbers are RoHS compliant. 263 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Shielded MT Headers for use with Shielded MT Receptacle Assemblies AMPMODU Right-Angle Headers PC Board Mounted .755 [19.18] Material and Finish C Housing — Black thermoplastic, .460 flame retardant [11.68] Posts — Copper alloy, plated .000030 [0.00076] gold over .000050 [0.00127] nickel on entire post Shield — Copper alloy, .020 [0.51] thick; pretinned .000030 [0.00076] min. Shield Right-Angle B Header .550 Related Product Data .125 [13.97] [3.18] .434 Mating Connectors — Double-Row .025 [11.02] MT Receptacle Assemblies with [.00.3706] [0.64] Sq. Posts Shielding Hardware — pages 256-263 .290 [7.37] Technical Documents— A pages 277, 278 .135 Product Specification [3.43] .318 108-25015, 108-25018, 108-25030 [8.08] Application Specification s 114-25032. .145±.003 er Instruction Sheet [3.68±0.08] ead 408-6532 .145±.003 2 Plc. ed H [3.628 P±l0c..08] A A d el hi S .050±.003 T [1.27±0.08] .725 M [18.45] 5 .550±.003 [13.97±0.08] [.21.0504±±.00.0038] D[±±.00.0038] [1.0.0420±±0.0.0083] Dia. D [±±.00.0038] [.21.0504±±.00.0038] 2D[±±.00.0038] (All holes) 2D [±±.00.0038] Recommended PC Board Hole Layout Recommended PC Board Hole Layout for 6, 8 and 10 Positions for 16 thru 50 Positions D - Contact centerline is .100 [2.54]; ±.003 [0.08] tolerances not to accumulate within one connector pattern. No. of Dimensions Header Shield Pos. A B C Part Nos. Part Nos. 6 .200 [5.08] .430 [10.92] .510 [12.95] 102792-6 102991-1 8 .300 [7.62] .530 [13.46] .610 [15.49] 102792-8 102991-2 10 .400 [10.16] .630 [16.00] .710 [18.03] 102792-1 102791-2 16 .700 [17.78] .930 [23.62] 1.010 [25.65] 102792-7 102791-3 18 .800 [20.32] 1.030 [26.16] 1.110 [28.19] 102792-2 102791-4 20 .900 [22.86] 1.130 [28.70] 1.210 [30.73] 102792-5 1-102791-0 26 1.200 [30.48] 1.430 [36.32] 1.510 [38.35] 102792-9 102791-1 50 2.400 [60.96] 2.630 [66.80] 2.710 [68.83] 102792-4 102791-8 Note:All part numbers are RoHS compliant. 264 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Replacement MT Receptacle Contacts Insulation Displacement Contacts Contact Identification Material and Finish Copper alloy, duplex plated .000030 [0.00076] gold in mating area, .000100- .050 .000200 [0.00254-0.00508] tin in crimp [1.27] Max. area, with entire contact underplated Insulation Diameter .000050 [0.00127] nickel Related Product Data Performance Characteristics — Standard Pressure High Pressure Wire Size Range page 255 Receptacle Receptacle AWG [mm2] Application Tooling — Contact Ident. Part No. Contact Ident. Part No. pages 273-275 30-26 0.05-0.15 1 5-102395-2 4 5-102641-6 26-22 0.12-0.3 2 5-102399-1 5 5-102642-6 22-20 0.3-0.6 3 5-102449-6 — — Technical Documents— Note:Termination tooling for MT receptacle insulation displacement contacts is shown on pages 273-275. pages 277, 278 Product Specification 108-25015, 108-25018, 108-25030 Application Specification 114-25032 Instruction Sheet 408-6532 MT receptacle contacts The MT receptacle contact The configuration of the M incorporate the following cross-section is primarily receptacle completely T C features. rectangular, with rounded encloses the spring o n corners. Two integral members helping to prevent ta c cantilever beams contact damage during handling ts Cantilever the mating square male and assembly, and makes Beams posts. Deflection of these the system compatible with spring members is limited automatic application by anti-overstress and techniques. 5 Anti- excessive permanent overstress deformation is prevented. This feature allows a wide Wide range for tolerance of Misalignment Tolerance misalignment of mating contacts. Extraction/Lance Reset Tool No. 843477-3 Note:All part numbers are RoHS compliant. 265 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mini-Tandem Spring Receptacle Housings and Contacts Product Facts ■ Individual contacts mate with .025 [0.64] sq. posts, .125 [3.18] long ■ Crimp snap-in contacts accept 32-22 AWG [0.03-0.32 mm2] wire ■ Retention latch provides for positive installation ■ No insertion tool required ■ High durability design provides long life ■ Available with .000015 [0.00038] or .000030 [0.00076] thick gold inlay in contact areas, or bright tin plated ■ Closed-entry housings ■ Mini-contact box size: .060 [1.52] sq. ■ Mini-Tandem Spring m Spring d Contacts Hoeinot hu.e1sri0n 0dg i[sr2e c.ca5tin4o ]bn cee snttaecrsk eidn dean ■ Mini-Tandem Mini-Tandem Spring Mini-Tandem Spring Specifications ni Tansings SRpercionggn Hizoeuds iunngdse ar rtehe Rdeesciegpnteadc lteo Cmoanttea cwtisth a .r0e25 Ruseecde pinta scinleg Cleo- notra dcotsu abrlee - Contact Current Rating — MiHou Component Program of [0.64] posts. When used row housings with .100 3 amperes Underwriters individually, they will mate [2.54] centerline spacing. Termination Resistance — 12 milliohms (max.) — gold plated Laboratories Inc., R with posts as short as .125 Single-row housings can be contacts 5 File No. E28476 [3.18] and when used in a converted into double-row 18 milliohms (max.) — tin plated ■ Certified by Canadian housing, they will mate with connectors on .100 x .200 contacts Standards .140 [3.55] long posts. [2.54 x 5.08] centers with Durability —Ref. Product Association, R These versatile contacts the use of stacking clips. Specification 108-25031 File No. LR 7189 may be used for Mini-Tandem Spring interconnecting posted Housings can be stacked pc panels, I/O wiring and side-by-side or end-to-end cross-connecting pin on .100 [2.54] centers. arrays. The receptacle contact's box configuration provides for long contact life with controlled contact mating forces which minimize wear. An external retention spring facilitates quick assembly and provides firm seating in a contact housing. 266 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mini-Tandem Spring Housings, Single-Row .100 [2.54] Centerline .550 [13.97] .030 [0.76] Material — Black glass-filled poly- .036 ester, 94V-0 rated [0.91] .066 [1.68] Technical Documents— pages 277, 278 .050 [1.27] .100 Product Specification A Max. [2.54] Max. 108-25031 Application Specification 114-25021 .100 .050 [2.54] [1.27] B Spaces @ .100[2.54] = C Minimum mating post length is .140 [3.55]. S p rin g H o u s in g s 5 No. of Dimensions Housing Pos. A B C Part No. 2 .200 [5.08] 1 .100 [2.54] 530554-1 4 .400 [10.16] 3 .300 [7.62] 530554-3 8 .800 [20.32] 7 .700 [17.78] 530554-7 12 1.200 [30.48] 11 1.100 [27.94] 1-530554-1 16 1.600 [40.64] 15 1.500 [38.10] 1-530554-5 18 1.800 [45.72] 17 1.700 [43.18] 1-530554-7 20 2.000 [50.80] 19 1.900 [48.26] 1-530554-9 22 2.200 [55.88] 21 2.100 [53.34] 2-530554-1 Note:Mini-Tandem Spring contacts for use in these housings are shown on page 269. Material—Natural color nylon, 94V-2 rated Keying Plug Part No. 531226-1 (Plugs directly into housing) Note:All part numbers are RoHS compliant. 267 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mini-Tandem Spring Housings, Double-Row .100 [2.54] Centerline .550 [13.97] .030 [0.76] Material — Black glass-filled .036 [0.91] polyester, 94V-0 rated* .066 [1.68] Technical Documents— pages 277, 278 A Max. Product Specification 108-25031 .200 [5.08] Application Specification 114-25021 .100 Max. [2.54] .100 .050 [2.54] [1.27] B Spaces @ .100[2.54] = C Minimum mating post length is .140 [3.55]. s mct ni-Tandeng Conta Mipri S 5 Material — Natural color nylon, 94V-2 rated No. of Dimensions Housing Pos. A B C Part No. 6 .300 [7.62] 2 .200 [5.08] 530902-1 8 .400 [10.16] 3 .300 [7.62] 530902-6 12 .600 [15.24] 5 .500 [12.70] 2-530902-0 Keying Plug 16 .800 [20.32] 7 .700 [17.78] 3-530902-0 Part No. 531226-1 (Plugs directly into housing) Note:Mini-Tandem Spring contacts for use in these housings are shown on page 269. *Consult Tyco Electronics for specific UL recognition. Note:All part numbers are RoHS compliant. 268 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Mini-Tandem Spring Contacts Receptacle Contacts .060 [1.52] Material and Finish Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold inlay on contact area, matte .060 tin in crimp area, with entire contact [1.52] underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold inlay on contact area, matte tin in crimp area, with entire contact underplated .000050 [0.00127] nickel .085 Min. Plating C — Duplex plated .000050 [2.15] Contact [0.00127] over matte tin in contact area, Area with over .000030 [0.00076] nickel on entire Gold Inlay contact Plating D — .000100 [0.00254] min. matte tin over .000030 [0.00076] nickel on entire contact Technical Documents— Low Pressure Contacts pages 277, 278 Miniature Applicator for Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC Product Specification Finish AWG mm2 Range Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper 108-25031 Machine* Machine Application Specification 0.36-0.54 Plating A 5531216-3 5531216-4 26-22 0.14-0.32 466819-2 466943-1 114-25021 [0.64-1.37] Plating B 5531216-1 5531216-2 S pM rinin Standard Pressure Contacts g Housingi-Tandem s Miniature Applicator for Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC Finish AWG mm2 Range Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper Machine* Machine 5 Plating B 530901-2 530901-3 .025-.054 32-28 0.03-0.08 Plating C 5530901-6 5530901-7 466723-1 466952-1 [0.64-1.37] Plating D 5530901-4 5530901-5 Plating B 5530553-4 — .036-.054 26-22 0.14-0.32 Plating C 5530553-6 — 466819-2 466943-1 [0.91-1.37] Plating D 5530553-2 — High Pressure Contacts Miniature Applicator for Wire Size Range Ins. Dia. Contact Part No. Applicator for AMP-O-MATIC Finish AWG mm2 Range Strip Form Loose Piece AMP-O-LECTRIC Stripper/Crimper Machine* Machine .025-.054 32-28 0.03-0.08 Plating B 5531225-6 — 466723-1 466952-1 [0.64-1.37] .036-.054 26-22 0.14-0.32 Plating B 5531224-6 — 466819-2 466943-1 [0.91-1.37] *For use with AMP-O-LECTRIC Model “K” machines. Call the Tooling/Technical Assistance Center (1-800-522-6752) for part nos. of applicators for use with the AMP-O-LECTRIC Model “G” machines (shown on page 270), as well as other bench machines and fully automatic AMPOMATOR lead making machines. Notes:1. Mini-Tandem Spring Receptacle Contacts are for use only in the housings shown on pages 267 & 268. They cannot be used in AMPMODU Mod IV Housings. 2. Use Hand Tool No. 91540-1 for crimping loose-piece receptacles to all wire sizes listed above. 3. Application tooling is described on pages 270 & 275. Note:All part numbers are RoHS compliant. 269 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Wire Crimp Contacts Tooling shown on this page AMP-O-LECTRIC Model “G” Terminating Machine is designed to terminate (Shown with Optional Crimp Force Monitor) wire crimp contacts used in various AMPMODU wire-to- A totally new design of our board connectors. Refer to most popular machine for page 88 to determine the bench-top operation. It applicable connectors. features a quiet and reliable direct motor drive, electronic controls for easy setup and operation, and improved guarding and lighting for operator convenience and safety. All versions include either manual or automatic precision adjustment for crimp height. For further details, request TycoElectronics Catalog 65828. AMP-O-MATIC Stripper/Crimper Machine g olin Applicators This machine automatically o strips as well as terminates T on Several terminating individual wires. Similar to ati machines, including the the AMP-O-LECTRIC Model c pli AMP-O-LECTRIC Model “G”, “G” machine, applicators Ap AMP-O-MATIC Stripper/ are quickly interchangeable, Crimper and AMPOMATOR and it includes precision CLS machines, are adjustment for crimp height. 5 designed for use with All adjustments can be made interchangeable from the front of the machine, applicators. Basic styles are without special tools. quickly interchangeable to For further details, request minimize costly downtimes, TycoElectronics Catalog and feature dial-in wire and 65004. insulation crimp height settings. Special applicators are available for use with the Crimp Force Monitor (see page 272), for measuring the crimp height EDGE, Electronic Applicator of each termination as it is Counter made, plus evaluating the The new versatile EDGE quality of each crimp. applicator counter tracks wearable tool usage for the most effective maintenance planning. The completely electronic counter with clear LCD display, indicates cycles since installation. By performing maintenance at measured intervals with pre-set limits, operators avoid breakdowns and rejects caused by tool wear or mid-adjustment. For more Heavy Duty Miniature information, request catalog Applicators 1773385. 270 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Wire Crimp Contacts (Continued) AMP 3K/40 and AMP 5K/40 Terminators As a value oriented terminator, the AMP 3K/40 and AMP 5K/40 are designed for customers that require the increased output and quality of a semiautomatic machine at a competitive price. By incorporating the most commonly requested features as standard and offering a long list of optional equipment, these terminators offer flexibility to meet the specific needs of various applications at the lowest possible cost. AMP 5K/40 Terminator A p p lic a tio Optional Stripping Module for n T the AMP 3K/40, AMP 5K/40 and oo the AMP-O-LECTRIC Model G lin g The combination of the Stripping Module with the 5 AMP-O-LECTRIC Model G Terminator or the AMP 3K/40, 5K/40 provides an economical, proficient method of stripping wire and crimping terminals on the same machine. Wires are stripped moments before crimping, meaning there is virtually no chance of damaging wire conductors during handling or storage. Once the wire is fed into the start sensor, the Stripping Module does the rest, improving placement accuracy. For more information, request catalog 1309085. 271 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Wire Crimp Contacts (Continued) Tooling shown on this page AMPOMATOR System III Leadmaker The AMPOMATOR is designed to terminate System III is an automatic wire crimp contacts used in machine for the production various AMPMODU wire-to- of terminated wire leads. board connectors. Refer to The machine combines page 88 to determine the state of the art technology applicable connectors. to process single and double wire application utilizing the wire processing industry’s best and most friendly subsystems and Crimp Force Monitor (CFM) accessories available to meet the latest market requirements for wire lead production. The new machine incorporates a servo-driven, software-controlled AMP-O-LECTRIC ST III terminator and the next generation System III Applicator. Your quality program calls for more than a good See catalog 1654956-5 for crimping system. It more information. demands proof - the proof g olin you get with the SLE Crimp o Force Monitor. It has high- T n resolution piezo-quartz o ati sensor technology for a c pli more precise identification Ap of typical crimping faults. Commercial PRO-CRIMPER III Premium CERTI-CRIMP Straight locator and support, and The monitor features Zone & Hand Tool Action Hand Tool (SAHT) insulation crimp adjustment. Peak Force Analysis, TycoElectronics hand tools 5 128x128 Dot Matrix, Force also can be adapted for Trigger and Encoder use with pneumatic tooling Proximity Trigger, and assemblies, providing air Absolute Force operated crimping Measurement for real-time capabilities. monitoring of every crimp. For further details on The CFM can be used with TycoElectronics straight bench or fully-automatic action hand tools, request machines. Special TycoElectronics hand TycoElectronics Catalog applicators are not required. tools are ideal for small 65780. For more details on Sure, you can sample and production and prototype TycoElectronics pneumatic Commercial grade hand test crimp height with a applications. They feature tooling assemblies, call tool for crimping various micrometer. In fact, that’s ratchet control to help elimi- the TycoElectronics products. Features ratchet how you standardize your nate partial crimps, straight- Technical Support Center, control to provide complete process. But for ongoing line die closure, terminal 1-800-522-6752. crimp cycle. Accepts both quality control, testing every pinned- and shouldered- crimp, SLE is the choice. It’s style die sets. Locators are known worldwide, and provided with pinned-style meets our standards for a die sets for proper contact high performance and wire positioning, and to terminating system. That’s help minimize contact rota- how you can be sure. tion and bending during High quality crimping - with crimping. Approximate verification - means higher weight 1.3 lb [0.60 kg]. production and productivity. 272 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Insulation Displacement Crimp (IDC) Contacts and Connectors Tooling shown on this page Pistol Grip Manual and is designed to terminate Air Powered Tools IDC contacts for various The manual pistol grip tool AMPMODU wire-to-board features an interchange- connectors. Refer to page able modular terminating 88 to determine the applica- head which also can be ble connectors. used in the pneumatic ver- sion, the Bench Mount Pneumatic Power Assembly Manual Pistol Grip and the IDC Electric Power Tool No. 58074-1 Unit. The head terminates Pneumatic Pistol Grip one unstripped wire per Tool No. 58075-1 cycle and indexes the con- nector to the next terminat- ing position. The head rotates to permit optimum access to the wiring area. The Bench Mount Pneumatic Power Assembly is air actu- ated with either a foot or knee switch. This capability frees the operator’s hands for optimum positioning. Modular Heads: Ap p 58062-1 (for MT connectors) lic a 58336-1 (for MTE connectors) tio n 58395-1 (for Level V IDC connectors) T Bench Mounted Pneumatic Power Assembly o 5w8ir5e 4o0r -fl1a t( froibr bMonT Ec acbolnen)ectors, discrete No. 58338-1 oling IDC Electric Power Unit 5 This electrically powered semiautomatic bench machine is designed for Modular Head applying AMPMODU MTE Tool No. 58540-1 and MT connectors to dis- crete wires. It is portable and compact and uses existing pistol grip modular heads. The heads are easily interchanged to run different products. *The IDC Electric Power Unit’s cycle rate is IDC Electric Power Unit approximately 7,200 cycles No. 931800-1 per hour, with exact produc- tion rates depending upon operator dexterity. Modular Heads: 58062-1 (for MT connectors) 58336-1 (for MTE connectors) *A tube-fed track assembly, Part No. 856675-1, also can be used with This modular head tool can MTE Connectors. be used on any pistol grip tool. It was designed for dis- crete wire or flat ribbon cable applications. Note:All part numbers are RoHS compliant. 273 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Insulation Displacement Crimp (IDC) Contacts and Connectors (Continued) Tooling shown on this page Tube-Fed Ribbon Cable Machine is designed to terminate IDC contacts for various AMPMODU wire-to-board connectors. Refer to page 88 to determine the appli- cable connectors. Tube-Fed Ribbon Cable Machine No. 856002-1 Designed for bench appli- spring-driven unit which cations, this machine is conveys connectors pneumatically operated and through the product tube to controlled by a foot pedal. It the terminating station. The terminates connectors onto air-operated terminating sta- end-notched ribbon cable. tion positions and termi- g *The connectors are sup- nates contacts onto the n oli plied in strip form and in notched cable. The seating To plastic tubes. The machine station is manually operated n o consists of three basic sub- and seats connector hous- cati assemblies: a feed track, a ings onto the terminated pli terminating station and a contacts. p A seating station. The feed track is a constant force, 5 *At a rate of 13-25 positions at a time. 2700 lb. Power Unit With Cable Notching Die Equipped with a cable notching die an adapter kit, this fully pneumatic bench machine provides the 2700 lb [12 010N] force required for end-notching ribbon cable. It features a grooved cable support plate, a pressure plate and a cable stop to facilitate cable alignment and positioning during the notching process. Notching Dies: 854449-1(for 24-22 AWG [0.2-0.6 mm2] Wire 854449-2(for 28-26 AWG [0.08-0.15 mm2] Wire 2700 lb. Power Unit No. 312522-1 Note:All part numbers are RoHS compliant. 274 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Application Tooling for Insulation Displacement Crimp (IDC) Contacts and Connectors (Continued) Tooling shown on this page CHAMPOMATOR Model 2.5 Terminating Machine No. 354786-(*) is designed to terminate IDC contacts for various AMPMODU wire-to-board connectors. Refer to page 88 to determine the applica- ble connectors. This compact bench and programmed by a *For applicable dash nos., machine terminates wires membrane switch key- call the Technical Support manually sorted from board. It also has an inter- Center: 1-800-522-6752. multiconductor cables. nal storage capability for For further details, request Termination sequence may retaining up to 350 cable TycoElectronics Catalog include full termination of all assemblies. Connectors 82247 contacts, or selective termi- can be terminated with nation. Designed for easy either straight or right-angle programming, the machine wire dress. is microprocessor controlled A p p CHAMPOMATOR Model 3A Terminating Machine No. 761420-(*) lic a tio n T o o lin g 5 This floor model machine controlled and programmed *For applicable dash nos., automatically sorts wires by a touchscreen. It also has call the Technical Support from multiconductor jack- an internal storage capability Center: 1-800-522-6752. eted cable and terminates for retaining up to 50 cable For further details, request them in a user-determined assemblies. Connectors can TycoElectronics Catalog sequence; either full termina- be terminated with either 82247 tion of all contacts, or selec- straight or right- angle wire tive termination. Designed dress. All cable assemblies for easy programming, the are tested for continuity and machine is microprocessor shorts. Note:All part numbers are RoHS compliant. 275 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Technical Documents for Board-to-Board Products Various technical documents Product Specificationsdescribe technical performance characteristics and verification tests. are available for your use. They are intended for the Design, Component and Quality Engineers. PC/104 and PC/104-PlusConnectors — Pages 5-12: 108-1956 PC/104 and PC/104-PlusConnector Systems Receptacle Assemblies and Unshrouded Breakaway Headers, Surface-Mount — Pages 109, 110, 185-192: 108-25017 AMPMODU Interconnection System, Two-Piece 108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies 108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle Assembly and Header Two-Piece Printed Circuit Board Connectors — Pages 193-202: 108-16 ACTION PIN Contacts 108-25017 AMPMODU Interconnection System, Two-Piece 108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly and Header Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192: 108-25022 AMPMODU Mod. IV Interconnection System, Vertical Assemblies 108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle Assembly and Header 108-25027 AMPMODU Mod. II Interconnection System, Short-Point Receptacle Assembly and Header .025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163: 108-16 ACTION PIN Contacts 108-25026 AMPMODU Mod. II Interconnection System, Standard Pressure Receptacle Assembly and Header s nt Application Specificationsdescribe requirements for using the product in its intended application, e m and/or crimping information. They are intended for the Packaging and Design Engineers and the u c Setup person. o D al PC/104 and PC/104-PlusConnectors — Pages 5-12: nic 114-13021 PC/104 and PC/104-PlusConnectors h c Two-Piece Printed Circuit Board Connectors — Pages 193-202: e T 114-9009 AMPMODU Header, Two-Piece, Double Row, Application of Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192: 114-25018 AMPMODU Mod. II and IV Receptacle Assembly, PC Board Mounted, Vertical, 5 Application of .025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163-167: 114-25028 ACTION PIN Contacts with Tyco Electronics Headers, Application 114-13011 AMPMODU .025 and .045 Square Continuous Posts Instruction Sheetsprovide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. PC/104 and PC/104-PlusConnectors — Pages 5-12: 408-8502 Future Board Assembly 1424685 for PC/104 and PC/104-PlusConnectors 408-8503 Seating Tool Assembly 1424686 for PC/104 and PC/104-PlusConnectors 408-8504 Pneumatic Seating Tool Assembly 1424930-1 for PC/104 and PC/104-Plus Connectors 408-8505 Manual Seating Tool Assembly 1424931-1 for PC/104 and PC/104-PlusConnectors Two-Piece Printed Circuit Board Connectors — Pages 193-202: 408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7 408-9054 Seating Tools Receptacle Assemblies, Horizontal and Vertical Board Mount — Pages 168-192: 408-7411 Suggestions for Wave Soldering Vertical AMPMODU Receptacles .025 [0.64] Square Posts, Headers, Accessories and Tooling — Pages 92-105, 114-140, 145-153, 163: 408-2636 ACTION PIN Contact Rear Insertion/Extraction Tool 265871-7 408-6944 Tyco Electronics Uninsulated Bandolier Post Insertion Tool 91419-1 408-7977 AMPMODU Double Row, Straight Posts, End Shrouds .100 x .100 [0.64 x 0.64] Centers 408-7878 AMPMODU Header Barrier Inserts 408-9054 ACTION PIN Contact Headers Seating Tool, 91170 Series 408-9707 Tool Kit 314818-1 for Breakaway Headers Handbook Guide to Application of ACTION PIN Contact Connectors Note:All part numbers are RoHS 5697 compliant. 276 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Technical Documents for Wire-to-Board Products Various technical documents Product Specificationsdescribe technical performance characteristics and verification tests. are available for your use. They are intended for the Design, Component and Quality Engineers. Locking Clip Contacts and Housings — Pages 206-209: 108-36028 Connector, Locking Clip, .025 [0.64] Square, Gold 108-36028-1 Connector, Locking Clip, .025 [0.64] Square, Tin Mod. IV Wire-Applied Contacts and Housings — Pages 210-220: 108-25007 AMPMODU Mod. V Interconnection System, Wire-Applied (High Pressure) 108-25019 AMPMODU Mod. IV Male Connectors 108-25020 AMPMODU Mod. IV Interconnection System, (Standard Pressure) 108-25021 AMPMODU Mod. IV.V Interconnection System, (Intermediate Pressure) Short-Point Wire-Applied Contacts and Housings — Pages 221-224: 108-1472 Short-Point Contacts and Housings AMPMODU MTE Interconnection System — Pages 225-252: 108-25034 AMPMODU MTE Connectors AMPMODU MT and Shielded MT Interconnection System — Pages 255-265: 108-25015 AMPMODU MT Standard Pressure Connectors 108-25018 AMPMODU MT High Pressure Connectors 108-25030 AMPMODU MT Shielding Accessories AMPMODU Level V, IDC Connectors — 108-25028 Interconnection System, Insulation Displacement Connector, IDC Level T Mini-Tandem Spring Receptacle Contacts — Pages 266-269: ec h 108-25031 Tandem Spring Receptacle Contact n ic a l D Application Specificationsdescribe requirements for using the product in its intended application, o c u and/or crimping information. They are intended for the Packaging and Design Engineers and the m e Setup person. n ts Locking Clip Contacts and Housings — Pages 206-209: 114-25006 Contact, Locking Clip, .025 [0.64] Square, Application of 5 Mod. IV Wire-Applied Contacts and Housings — Pages 210-220: 114-25003 AMPMODU Mod. IV (Standard Pressure), AMPMODU Mod. IV.V (Intermediate Pressure) and AMPMODU Mod. V (High Pressure) Receptacle Contacts, Application of 114-25016 AMPMODU Mod. IV Crimp Pin Contact Short-Point Wire-Applied Contacts and Housings — Pages 221-224: 114-25038 Short-Point Contacts and Housings AMPMODU MTE Interconnection System — Pages 225-252: 114-25026 AMPMODU MTE Interconnection System AMPMODU MT and Shielded MT Interconnection System — Pages 255-265: 114-25032 AMPMODU MT Interconnection System and Shielding Accessories, Application of AMPMODU Level V, IDC Connectors — 114-25020 Interconnection System, IDC Level V, Application of Mini-Tandem Spring Receptacle Contacts — Pages 266-269: 114-25021 Tandem Spring Receptacle Contact, Application of Note:All part numbers are RoHS compliant. 277 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System Technical Documents for Wire-to-Board Products (Continued) Instruction Sheetsprovide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. Locking Clip Contacts and Housings — Pages 206-209: 408-7604 Tyco Electronics Extraction Tool 91084-1 408-7606 Tyco Electronics Locking Clip Contacts and Connectors 408-7627 Tyco Electronics Hand Crimp Tool 90295-1, 28-30 AWG Wire 408-8547 Tyco Electronics Hand Crimp Tool 91533-1, 22-26 AWG Wire 408-9388 Tyco Electronics Hand Crimp Tool 90431-1, 20 AWG Wire Mod. IV Wire-Applied Contacts and Housings — Pages 210-220: 408-4379 Tyco Electronics PRO-CRIMPER II Hand Tool 408-7935 AMPMODU Receptacle Connectors with Strain Relief/Pull Tabs 408-8547 Tyco Electronics Hand Tool 91516-1, 91517-1 and 91541-1 408-9451 Tyco Electronics Extraction Tool 843473-1 for AMPMODU Wire-Applied Housings 86308 408-9453 Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU Crimp Snap-In Receptacle Contacts from Wire-Applied Housings AMPMODU MTE Interconnection System — Pages 225-252: 409-5746 Tyco Electronics Electric Power Unit 931800-1 409-5832 MTE Ribbon Cable Terminator 856002-1 408-6789 Tyco Electronics Pneumatic Pistol Handle 58075-1 408-6790 Tyco Electronics Manual Pistol Handle 58074-1 408-6919 AMPMODU MTE Connectors nts 408-8547 Tyco Electronics Hand Crimp Tool 91518-1 and 91551-1 me 408-9230 Tyco Electronics Keying Tool 91417-1 cu 408-9359 MTE Modular Terminating Head 58336-1 o D 408-9393 Tyco Electronics Pneumatic Bench Assy. 58338-1 al c 408-9407 Tyco Electronics Hand Crimp Tool 91531-1 and 58342-2 ni h 408-9453 Tyco Electronics Extraction Tools 843996 and 843477 for Removing AMPMODU c Te Crimp Snap-In Receptacle Contacts from Wire-Applied Housings 408-9515 Ribbon Cable Notcher 854449-[] 5 AMPMODU MT and Shielded MT Interconnection System — Pages 255-265: 408-6532 AMPMODU MT Connectors AMPMODU Level V, IDC Connectors — 408-6843 Tyco Electronics Extraction Tool 91409-1 Standard Tandem Spring and Mini-Tandem Spring Receptacle Contacts — Pages 266-269: 408-7909 Tyco Electronics Hand Crimping Tool 91540-1 Note:All part numbers are RoHS compliant. 278 Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: 104483-1