1.5SMC Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB® Transient Voltage Suppressors FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a Available 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance SMC (DO-214AB) • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 • Material categorization: for definitions of compliance PRIMARY CHARACTERISTICS please see www.vishay.com/doc?99912 V (uni-directional) 5.8 V to 459 V WM TYPICAL APPLICATIONS V (bi-directional) 5.8 V to 185 V WM VBR (uni-directional) 6.8 V to 540 V Use in sensitive electronics protection against voltage V (bi-directional) 6.8 V to 220 V transients induced by inductive load switching and lightning BR on ICs, MOSFET, signal lines of sensor units for consumer, P 1500 W PPM computer, industrial, automotive, and telecommunication. P 6.5 W D I (uni-directional only) 200 A FSM MECHANICAL DATA T max. 150 °C J Case: SMC (DO-214AB) Polarity Uni-directional, bi-directional Molding compound meets UL 94 V-0 flammability rating Package SMC (DO-214AB) Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and DEVICES FOR BI-DIRECTION APPLICATIONS AEC-Q101 qualified For bi-directional devices use CA suffix (e.g. 1.5SMC220CA). (“_X” denotes revision code e.g. A, B, ..... and only available for 250 V to 540 V type) Electrical characteristics apply in both directions. Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) P 1500 W PPM Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) I See next table A PPM Power dissipation on infinite heatsink at T = 50 °C P 6.5 W A D Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I 200 A FSM Operating junction and storage temperature range T , T -65 to +150 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal Revision: 11-Jul-17 1 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5SMC Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM DEVICE MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK PART MARKING V AT I (1) CURRENT VOLTAGE LEAKAGE PULSE CLAMPING TEMPERATURE CODE BR T VOLTAGE COEFFICIENT NUMBER (V) I V AT V CURRENT T WM WM AT I OF V (mA) (V) I (4) I (2) PPM BR UNI BI MIN. MAX. (DμA) PP(MA ) VC (V) (%/°C) 1.5SMC6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 143 10.5 0.057 1.5SMC7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 133 11.3 0.061 1.5SMC8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 124 12.1 0.065 1.5SMC9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1.5SMC10A 10A 10C 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1.5SMC11A 11A 11C 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075 1.5SMC12A 12A 12C 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078 1.5SMC13A 13A 13C 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081 1.5SMC15A 15A 15C 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084 1.5SMC16A 16A 16C 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086 1.5SMC18A 18A 18C 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089 1.5SMC20A 20A 20C 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090 1.5SMC22A 22A 22C 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092 1.5SMC24A 24A 24C 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.090 1.5SMC27A 27A 27C 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096 1.5SMC30A 30A 30C 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097 1.5SMC33A 33A 33C 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098 1.5SMC36A 36A 36C 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099 1.5SMC39A 39A 39C 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100 1.5SMC43A 43A 43C 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101 1.5SMC47A 47A 47C 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101 1.5SMC51A 51A 51C 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102 1.5SMC56A 56A 56C 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103 1.5SMC62A 62A 62C 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104 1.5SMC68A 68A 68C 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104 1.5SMC75A 75A 75C 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105 1.5SMC82A 82A 82C 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105 1.5SMC91A 91A 91C 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106 1.5SMC100A 100A 100C 95.0 105 1.0 85.5 1.0 10.9 137 0.106 1.5SMC110A 110A 110C 105 116 1.0 94.0 1.0 9.9 152 0.107 1.5SMC120A 120A 120C 114 126 1.0 102 1.0 9.1 165 0.107 1.5SMC130A 130A 130C 124 137 1.0 111 1.0 8.4 179 0.107 1.5SMC150A 150A 150C 143 158 1.0 128 1.0 7.2 207 0.106 1.5SMC160A 160A 160C 152 168 1.0 136 1.0 6.8 219 0.108 1.5SMC170A 170A 170C 162 179 1.0 145 1.0 6.4 234 0.108 1.5SMC180A 180A 180C 171 189 1.0 154 1.0 6.1 246 0.108 1.5SMC200A 200A 200C 190 210 1.0 171 1.0 5.5 274 0.108 1.5SMC220A 220A 220C 209 231 1.0 185 1.0 4.6 328 0.108 1.5SMC250A 250A - 237 263 1.0 214 1.0 4.4 344 0.110 1.5SMC300A 300A - 285 315 1.0 256 1.0 3.6 414 0.110 1.5SMC350A 350A - 333 368 1.0 300 1.0 3.1 482 0.110 1.5SMC400A 400A - 380 420 1.0 342 1.0 2.7 548 0.110 1.5SMC440A 440A - 418 462 1.0 376 1.0 2.5 602 0.110 1.5SMC480A 480A - 456 504 1.0 408 1.0 2.28 658 0.110 1.5SMC510A 510A - 485 535 1.0 434 1.0 2.15 698 0.110 1.5SMC540A 540A - 513 567 1.0 459 1.0 2.03 740 0.110 Notes (1) Pulse test: t ≤ 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V of 10 V and less, the I limit is doubled R D (5) V = 3.5 V at I = 100 A (uni-directional only) F F Revision: 11-Jul-17 2 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5SMC Series www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient air (1) RθJA 75 °C/ W Typical thermal resistance, junction to leads RθJL 15 Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) UNIT VOLTAGE RANGE (V) PACKAGE BASE PREFERRED P/N WEIGHT DELIVERY MODE (g) UNI - BI - CODE QUANTITY 1.5SMC6.8A-E3/57T 0.211 6.8 to 540 6.8 to 220 57T 850 7" diameter plastic tape and reel 1.5SMC6.8A-E3/9AT 0.211 6.8 to 540 6.8 to 220 9AT 3500 13" diameter plastic tape and reel 1.5SMC6.8AHE3/57T (1) 0.211 6.8 to 220 6.8 to 220 57T 850 7" diameter plastic tape and reel 1.5SMC6.8AHE3/9AT (1) 0.211 6.8 to 220 6.8 to 220 9AT 3500 13" diameter plastic tape and reel 1.5SMC250AHE3_A/H (1)(2) 0.211 250 to 540 - H 850 7" diameter plastic tape and reel 1.5SMC250AHE3_A/I (1)(2) 0.211 250 to 540 - I 3500 13" diameter plastic tape and reel 1.5SMC6.8A-M3/57T 0.211 6.8 to 540 6.8 to 220 57T 850 7" diameter plastic tape and reel 1.5SMC6.8A-M3/9AT 0.211 6.8 to 540 6.8 to 220 9AT 3500 13" diameter plastic tape and reel 1.5SMC6.8AHM3/H (1) 0.211 6.8 to 220 6.8 to 220 H 850 7" diameter plastic tape and reel 1.5SMC6.8AHM3/I (1) 0.211 6.8 to 220 6.8 to 220 I 3500 13" diameter plastic tape and reel 1.5SMC250AHM3_A/H (1)(2) 0.211 250 to 540 - H 850 7" diameter plastic tape and reel 1.5SMC250AHM3_A/I (1)(2) 0.211 250 to 540 - I 3500 13" diameter plastic tape and reel Notes (1) AEC-Q101 qualified (2) _A is only available for 250 V to 540 V type RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 100 100 )P P )W I( tn k e% ( rewoP esluP kaeP - PMPP 101 0.31C xo 0p.p3e1r" P(8a.d0 Ax r8e.a0s m m) rruC ro )P( rewoP esluP kPP ,egatnecreP ni gnitareD 752505 a e 0.1 P 0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 25 50 75 100 125 150 175 200 td - Pulse Width (s) TJ - Initial Temperature (°C) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Revision: 11-Jul-17 3 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5SMC Series www.vishay.com Vishay General Semiconductor 150 100 RSM tr = 10 µs iTPsJu dl=se e2fi n5We °idCd tahs ( tthd)e Point )W/C % I PeakValue where the Peak Current °( e urrent, 100 IPPM decays to 50 % of IPPM cnadep 10 C m ulse HIPaPlMf Value - IP2P I lam - Peak PM 50 1a0s/1d0e0fi0neµds bWyaRv.eEfo.Arm. rehT tneis 1.0 P n IP td arT 0 0.1 0 1.0 2.0 3.0 4.0 0.001 0.01 0.1 1 10 100 1000 t - Time (ms) tp - Pulse Duration (s) Fig. 3 - Pulse Waveform Fig. 5 - Typical Transient Thermal Impedance 20 000 200 Measured at 10 000 e (pF) Zero Bias ent (A) 100 apacitanc1000 V , Measured urge Curr C R S n at Stand-Off d ctio Voltage VWM war C - JunJ 100 UBin-Di-Direircetciotinoanlal Tf =J =1 .205 M °CHz eak For T8.J3 = m TsJ Smianxg.le Half Sine-Wave P V = 50 mVp-p sig 10 10 1 10 100 400 1 10 100 VWM - Reverse Stand-Off Voltage (V) Number of Cycles at 60 Hz Fig. 4 - Typical Junction Capacitance Uni-Directional Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Mounting Pad Layout Cathode Band 0.185 (4.69) MAX. 0.126 (3.20) 0.246 (6.22) 0.114 (2.90) 0.220 (5.59) 0.126 (3.20) MIN. 0.280 (7.11) 0.060 (1.52) 0.260 (6.60) MIN. 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.320 REF. 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 11-Jul-17 4 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: 1.5SMC100CA-E3/1T 1.5SMC10A/9T 1.5SMC11CA-E3/1T 1.5SMC12CA/1T 1.5SMC12CA-E3/1T 1.5SMC150CA/1T 1.5SMC150CA-E3/1T 1.5SMC15A-E3/1T 1.5SMC15CA/1T 1.5SMC15CA-E3/1T 1.5SMC160A- E3/1T 1.5SMC180A/1T 1.5SMC180A-E3/1T 1.5SMC18A-E3/1T 1.5SMC200A/9T 1.5SMC200A-E3/1T 1.5SMC200CA/1T 1.5SMC200CA-E3/1T 1.5SMC20A-E3/1T 1.5SMC220A-E3/1T 1.5SMC220CA-E3/1T 1.5SMC22A- E3/1T 1.5SMC250A/1T 1.5SMC27CA/1T 1.5SMC27CA-E3/1T 1.5SMC30A-E3/1T 1.5SMC30CA-E3/1T 1.5SMC33A- E3/1T 1.5SMC400A/9AT 1.5SMC43A-E3/1T 1.5SMC51A/9T 1.5SMC51A-E3/1T 1.5SMC51CA-E3/1T 1.5SMC540A/51T 1.5SMC540A/9AT 1.5SMC540A/9T 1.5SMC56CA/9AT 1.5SMC68A-E3/1T 1.5SMC75CA/1T 1.5SMC75CA-E3/1T 1.5SMC91CA/1T 1.5SMC91CA-E3/1T 1.5SMC100A/57T 1.5SMC100A/59T 1.5SMC100A/9AT 1.5SMC100A-E3/57T 1.5SMC100A-E3/59T 1.5SMC100A-E3/9AT 1.5SMC100AHE3/57T 1.5SMC100AHE3/59T 1.5SMC100AHE3/9AT 1.5SMC100CA/57T 1.5SMC100CA/59T 1.5SMC100CA/7T 1.5SMC100CA/9AT 1.5SMC100CA-E3/57T 1.5SMC100CA-E3/59T 1.5SMC100CA-E3/9AT 1.5SMC100CAHE3/57T 1.5SMC100CAHE3/59T 1.5SMC100CAHE3/9AT 1.5SMC10A/57T 1.5SMC10A/59T 1.5SMC10A/9AT 1.5SMC10A- E3/57T 1.5SMC10A-E3/59T 1.5SMC10A-E3/9AT 1.5SMC10AHE3/57T 1.5SMC10AHE3/59T 1.5SMC10AHE3/9AT 1.5SMC10CA/57T 1.5SMC10CA/59T 1.5SMC10CA/9AT 1.5SMC10CA-E3/57T 1.5SMC10CA-E3/59T 1.5SMC10CA- E3/9AT 1.5SMC10CAHE3/57T 1.5SMC10CAHE3/59T 1.5SMC10CAHE3/9AT 1.5SMC110A/51T 1.5SMC110A/57T 1.5SMC110A/59T 1.5SMC110A/9AT 1.5SMC110A-E3/51T 1.5SMC110A-E3/57T 1.5SMC110A-E3/59T 1.5SMC110A-E3/9AT 1.5SMC110AHE3/57T 1.5SMC110AHE3/59T 1.5SMC110AHE3/9AT 1.5SMC110CA/57T 1.5SMC110CA/59T 1.5SMC110CA/7T 1.5SMC110CA/9AT 1.5SMC110CA-E3/57T 1.5SMC110CA-E3/59T 1.5SMC110CA-E3/9AT 1.5SMC110CAHE3/57T 1.5SMC110CAHE3/59T 1.5SMC110CAHE3/9AT