Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series 467 Series 0603 Fast-Acting Fuse RoHS Pb Description The 467 Series Fast-Acting Surface Mount Fuse (SMF) is an ultra small (0603 size) thin-film device designed for secondary protection of circuits used in space constrained applications such as hand-held portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive. New Halogen-Free 467 Series fuses are available–to order use the “HF” suffix. See Part Numbering section for additional information.. Features Agency Approvals • Compatible with lead- • Flat top surface for pick- AGENCY AGENCY FILE NUMBER AMPERE RANGE free solders and higher and-place operations temperature profiles • Element covering material E10480 0.250A - 5A • High performance is resistant to industry materials provide improved standard cleaning 29862 0.250A - 5A performance in elevated operations ambient temperature • Mounting pad and applications electrical performance is Electrical Characteristics for Series • Marked on top surface identical to Littelfuse 431 with code to allow amp and 434 Series products % of Ampere Opening Time at 25OC rating identification without • Halogen free, Lead-free Rating testing and RoHS compliant 100% 4 hours, Minimum • Low profile for height sensitive applications 200% 5 sec., Maximum 300% 0.2 sec., Maximum Additional Information Applications Secondary protection for space constrained applications: • Cell phones • DVD players • Battery packs • Hard disk drives. Datasheet Resources Samples • Digital cameras Electrical Specifications by Item Max Nom Nom Agency Approvals Ampere Nominal Cold Nominal Amp Voltage Interrupting Voltage Power Rating Resistance Melting Code Rating Rating Drop Dissipation (A) (Ohms) I2t (A2sec) (V) (mV) (W) 0.250 .250 32 0.5650 0.0014 158.56 0.0396 x x 0.375 .375 32 0.3000 0.0035 128.03 0.0480 x x 0.500 .500 32 50A @32V AC/DC 0.1870 0.0087 138.50 0.0693 x x 0.750 .750 32 0.1170 0.0171 123.30 0.0925 x x 1.00 001. 32 0.0700 0.0212 67.40 0.0674 x x 1.25 1.25 32 35A @32V AC/DC 0.0510 0.0518 84.32 0.1054 x x 1.50 01.5 32 13A @65V DC 0.0385 0.0766 71.60 0.1074 x x 1.75 1.75 32 0.0310 0.0903 78.75 0.1378 x x 2.00 002. 32 0.0280 0.1891 78.22 0.1564 x x 2.50 02.5 32 0.0210 0.2066 76.10 0.1903 x x 3.00 003. 32 35A @32V AC/DC 0.0170 0.2403 75.04 0.2251 x x 3.50 03.5 32 0.0139 0.4306 65.30 0.2286 x x 4.00 004. 32 0.0118 0.8410 63.10 0.2524 x x 5.00 005. 32 0.0089 0.9000 61.20 0.3060 x x 1. Measured at 10% of rated current, 25ºC. 2. Measured at rated voltage. © 2018 Littelfuse, Inc. Specifications are subject to change without nSoptieccei.fi cAaptpiolincsa taioren steusbtjiencgt itso s ctrhoannggley rweicthoomumt neontdiceed.. Revised: 12/13/18

Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series Temperature Rerating Curve Average Time Current Curves A AA A 0.250 0.375 0.500 0.750 1.00 A1.25 A1.50 A1.75 A2.00 A2.50 A3.00 A3.50 A4.00 A5.00 A 100 10 S D N O C SE1 N E I M TI 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Example: 0.01 For continuous operation at 70 degrees celsius, the fuse should be deratedas follows: I = (0.75)(0.80)I = (0.60)I RAT RAT 2. The temperature derating curve represents the nominal conditions. For questions 0.001 about temperature derating curve, please consult Littelfuse technical support for assistance. 0.1 1 10 100 CURRENT IN AMPERES Soldering Parameters Reflow Condition Pb – Free assembly t P T P Critical Zone - Temperature Min (T ) 150°C Ramp-up TL to TP s(min) Pre Heat -- TTeimmep e(Mraitnu rteo MMaaxx )( T(tss()max)) 2600 0–° C180 secs erutaTS(mTaxL) tL Average ramp up rate (Liquidus Temp r Ramp-down (TL) to peak 5°C/second max epmTS(min) Preheat T to T - Ramp-up Rate 5°C/second max eT tS S(max) L - Temperature (T) (Liquidus) 217°C Reflow L 25 - Temperature (t) 60 – 150 seconds time to peak temperature L Time (t 25ºC to peak) Peak Temperature (T ) 250+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Temperature (t ) p Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (T ) 8 minutes Max. P Do not exceed 260°C Wave Soldering 260°C, 10 seconds max. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/18

Surface Mount Fuses Thin Film > 0603 Size > Very Fast-Acting > 467 Series Product Characteristics Body: Advanced High Temperature Substrate Thermal Shock Withstands 5 cycles of – 55OC to 125OC Materials Terminations: 100% Tin over Nickel over Copper Vibration Per MIL-STD-202 Element Cover Coat: Conformal Coating Insulation Resistance – 55OC to 90OC. Consult temperature re-rating Greater than 10,000 ohms. Operating (After Opening) curve chart. For operation above 90°C contact Temperature Littelfuse. Resistance to MIL-STD-202, Method 210, Soldering Heat Condition D Humidity MIL-STD-202, Method 103, Condition D Dimensions Part Marking System 1.60±0.102 (.063"±0.004") 0.330±0.102 Amp Marking Amp Marking (.00.0152"7±±00..010042") (.013"±0.004") Code Code Code Code Sn .250 D 002. N .375 E 02.5 O 0.279±0.076 Coating (.011"±0.003") .500 F 003. P MARKING CODE VARIES Sn Cu W(SIETEH C AHMAPRETR)AGE RATING .750 G 03.5 R .18 0.813±0.076 R (.007") 001. H 004. S (.032"±0.003") REF. 1.25 J 005. T Sn 01.5 K 1.09 (.043") 1.75 L 1.02 3.20 (.040") (.126") 2.54 1.02 (.100") (.040") .762 Part Numbering System (.030") (.10.4039") (.10.4039") 0467002.NRHF WAVE SOLDER REFLOW SOLDER SERIES AMP Code Packaging The dot is poisitioned before the Pack- aging Suffix with whole ratings and within the numbering sequence for Packaging Packaging Quantity & fractional ratings. Refer to Amp Code Example: Option Specification Quantity Packaging Code column in the Electrical Specifications 1.5 amp product is table. 046701.5NRHF (2 amp EIA-481 Rev. PACKAGING Code product shown above). 8mm Tape and D (IEC 60286, 5000 NR NR = Tape and Reel, 5000 pcs Reel part 3) ‘HF’ SUFFIX HALOGEN FREE ITEM Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/18