Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series 218 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description The 218 series fuse is a 5x20mm time-lag glass body cartridge fuse designed to IEC specification. Features • Designed to International • Available in cartridge and IEC Standards for use axial lead form globally • RoHS compliant and • Meets the IEC 60127-2, lead-free Sheet 3 specification for Time-Lag fuses Agency Approvals Applications Agency Agency File Number Ampere Range Used as supplementary protection in appliance or Cartridge: utilization equipment to provide individual protection for NBK090205-E10480A 1A – 5A components or internal circuits. NBK120802-E10480C 6.3A – 15A PS E Leaded: NBK090205-E10480B 1A – 5A NBK120802-E10480D 6.3A – 15A Additional Information 2005010207145715 0.032A – 6.3A SU05001-3005 0.032A – 0.040A SU05001-2008 0.050A – 0.800A SU05001-2009 1A – 10A Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, E10480 0.032A – 16A see ‘Recommended Accessories’ section. 29862 0.032A - 10A; 15A Electrical Characteristics 1620064 0.032A – 6.3A % of Ampere Ampere Rating Opening Time Rating 40013496 0.032A – 10A 0.032A - 0.100A 60 minutes, Minimum 150% 0.125A - 6.3A 60 minutes, Minimum 40016604 15A* 8A - 16A 30 minutes, Minimum KM41462 0.080A – 6.3A 0.032A - 0.100A 120 sec., Maximum 210% 0.125A - 6.3A 120 sec., Maximum N/A 0.032A – 16A 8A - 16A 120 sec., Maximum * Approval for Cartridge versions only 0.032A - 0.100A 200 ms., Min.; 10 sec. Max. 275% 0.125A - 6.3A 600 ms., Min.; 10 sec. Max. 8A - 16A 600 ms., Min.; 10 sec. Max. 0.032A - 0.100A 40 ms., Min.; 3 sec. Max. 400% 0.125A - 6.3A 150 ms., Min.; 3 sec. Max. 8A - 16A 150 ms., Min.; 3 sec. Max. 0.032A - 0.100A 10 ms., Min.; 300 ms. Max. 1000% 0.125A - 6.3A 20 ms., Min.; 300 ms. Max. 8A - 16A 20 ms., Min.; 300 ms. Max. © 2018 Littelfuse, Inc. Specifications are subject to change without notice.Application testing is strongly recommended. Revised: 06/11/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Electrical Characteristics Maximum Maximum Agency Approvals Nominal Amp Voltage Nominal Voltage Drop Power Amp Interrupting Cold Rating Rating Melting at Rated Dissipation Code (A) (V) Rating Re(Osihstmans)ce I2t (A2 sec) Current At PES (mV) 1.5ln(W) .032 0.032 250 48.2580 0.01100 5000 1.6 x x x x x x x .040 0.04 250 31.8620 0.01100 4000 1.6 x x x x x x x .050 0.05 250 21.2920 0.02700 3500 1.6 x x x x x x x .063 0.063 250 14.2680 0.04600 3000 1.6 x x x x x x x .080 0.08 250 9.0700 0.07500 2500 1.6 x x x x x x x x .100 0.1 250 6.0180 0.07900 2000 1.6 x x x x x x x x .125 0.125 250 4.2000 0.1465 1900 1.6 x x x x x x x x .160 0.16 250 3.7000 0.14400 1500 1.6 x x x x x x x x .200 0.2 250 1.6000 0.3410 1300 1.6 x x x x x x x x .250 0.25 250 1.0495 0.5405 1100 1.6 x x x x x x x x .315 0.315 250 35 A @ 250 VAC 0.8475 1.1100 1000 1.6 x x x x x x x x .400 0.4 250 0.5350 1.3250 900 1.6 x x x x x x x x .500 0.5 250 0.3700 2.8250 300 1.6 x x x x x x x x .630 0.63 250 0.2750 4.6750 250 1.6 x x x x x x x x .800 0.8 250 0.0813 3.370 150 1.6 x x x x x x x x 001. 1 250 0.0613 6.730 150 1.6 x x x x x x x x x 1.25 1.25 250 0.0446 12.650 150 1.6 x x x x x x x x x 01.6 1.6 250 0.0336 23.350 150 1.6 x x x x x x x x x 002. 2 250 0.0293 14.450 150 1.6 x x x x x x x x x 02.5 2.5 250 0.0219 23.250 120 1.6 x x x x x x x x x 3.15 3.15 250 0.0173 38.150 100 1.6 x x x x x x x x x 004. 4 250 40 A @ 250 VAC 0.0129 69.10 100 1.6 x x x x x x x x x 005. 5 250 50 A @ 250 VAC 0.0104 111.00 100 1.6 x x x x x x x x x 06.3 6.3 250 63 A @ 250 VAC 0.0076 198.50 100 1.6 x x x x x x x x x 008. 8 250 80 A @ 250 VAC 0.0059 341.50 100 4 x x x x x x 010. 10 250 100 A @ 250 VAC 0.0045 568.00 100 4 x x x x x x 12.5 12.5 250 63 A @ 250 VAC 0.0034 889.00 100 4 x x x 015. 15 250 100 A @ 250 VAC 0.0028 1405.00 100 4 x x x x x* 016. 16 250 63 A @ 250 VAC 0.0021 1955.00 100 4 x x * Approval for cartidge versions only Temperature Re-rating Curve Average Time Current Curves 0.032A0.040A0.050A0.063A0.080A0.100A0.125A0.160A0.200A0.250A0.315A0.400A0.500A0.630A0.800A1A1.25A1.6A2A2.5A3.15A4A5A6.3A8A10A12.5A15A16A 10000 1000 100 S D N CO 10 E S N E I M TI 1 0.1 0.01 0.01 0.1 1 10 100 CURRENT IN AMPERES © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/11/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 C) - Measured on bottom side of board 11111222228024680246800000000000 ( SPD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaiantrmixoaiminmte Tuuteuremmemrp::e:rature) (1162T05y06Lp00-0ei1c°°°aa8CCCld 0I n- MdFsuerasectxreoyim nRRdeuecsmcomommemndeatniodn)ation mperature (° 246000 RSeocldoemr mDweenldl Teidm eH:and-Solder 2P-a5r saemcoentdesrs: Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Solder Iron Temperature: 350°C +/- 5°C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Note: These devices are not recommended for IR or Dwell Time Convection Reflow process. Product Characteristics Body: Glass Operating Temperature –55ºC to +125ºC Material Cap: Nickel–plated Brass Leads: Tin–plated Copper MIL-STD-202, Method 107, Test Thermal Shock Condition B (5 cycles, –65°C to MIL-STD-202, Method 211, Test Terminal Strength +125°C) Condition A Vibration MIL-STD-202, Method 201 Solderability MIL-STD-202, Method 208 MIL-STD-202, Method 103, Test Cap1: Brand logo, current and Condition A (High RH (95%) and Product Marking voltage ratings Humidity elevated temperature (40°C) for 240 Cap2: Agency approval marks hours) Available in Bulk (M=1000 pcs/pkg) MIL-STD-202, Method 101, Test Salt Spray Packaging or on Tape/Reel (MRET1=1000 pcs/ Condition B reel) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/11/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 218 Series Dimensions Part Numbering System 0218 xxxx M X E P 20+0.5 0218 000P 5.2+0.1 -0.2 Series 5.1+0.6 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 0218.032 XEP 40±1.0 21.5±1.0 Quantity Code to M = 1000 0218.100XEP 0.65±0.05 Packaging Code X = Filler Option Codes 0218.125 XEP 40±1.0 21.5±1.0 5.5±0.3 BE lank :: CAaxriatild Lgeea Tdy Fpues Feuse to 0218016. XEP Lead-free 0.65±0.05* All dimensions in mm Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code 218 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Max Max Accessory Series Description Application Application Type Voltage Amperage 345_ISF Panel Mount Shock-Safe Fuseholder 10 Holder 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 10 Block 646 PC Mount Miniature Fuse Block 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 Clip 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/11/18