Fuseholder Blocks & Clips OGN https://www.schurter.com /PG02 Fuseholder Open Design, 5 x 20 mm, THT, var. Covers, IEC 60335-1 See below: 500 VAC · 4 W / 16 A (VDE) · 500 V · 16 A (UL/CSA) Approvals and Compliances Description Applications - For appliances in unattended use - Household appliances - Glow wire tests acc. to IEC 60695-2-12 and -13 Weblinks - Low profile fuse block with insulation walls pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Shock-Safe Category PC1 Soldering Methods Wave Fuse-Link 5 x 20 mm Soldering Profile Mounting PCB Solderability 245 °C / 3 sec acc. to IEC 60068-2-20, Attachment Screw, rivet or THT Test Ta, method 1 Terminal Solder THT Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20, Rated Voltage 500 VAC (VDE), 500 V (UL/CSA) Test Tb, method 1 Rated current 10/16 A (VDE), 16 A (UL/CSA) Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6 Rated Power Acceptance IEC 4 W / 16 A @ Ta 23 °C Dielectric Strength > 3 kV between life parts 4 W / 10A with black cover (50 Hz; 1 min) 2.5 W / 10 A with transparant cover, see Impulse Withstand Voltage > 4 kV between life parts derating curves Insulation Resistance ≥ 10 MΩ Degree of Protection IP 20 (with cover) (500 VDC; 1 min) Protection Class Suitable for appliances with protection Overvoltage Category III acc. to IEC 60664-1 class I acc. to IEC 61140 Pollution Degree 3 acc. to IEC 60664-1 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket see variants Material: Cover Thermoplastic UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight 1.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Rated Voltage, Rated current, Power Rating, Dielectric strength Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: OGN Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40001042 VDE Approvals VDE VDE Certificate Number: 40045404 UL Approvals UL UL File Number: E39328 Fuses 1

OGN Fuseholder Blocks & Clips https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the glow wire test acc. IEC 60335-1 edition 4 Dimension [mm] 22.5 mm 25 22.5 9.6 1.3+ 00.1 Cover 90° 11.5 12.7 22.5 4 25 ø 2.7 1.1 22.5 10.8 25 Drilling diagram 2 Fuses

Fuseholder Blocks & Clips OGN https://www.schurter.com /PG02 Derating Curves With Transparent Cover 4.0 n e i 3.5 n 2.5 anc 3.0 wer Acceptance iWatt 112...500 III === 10<..<07 IIInnn ble Power AcceptWatt 1122....5005 III === 10<..<07 IIInnn ssible Po 0.5 Admissi 00..50 0 20 40 60 80 100 mi d 0.0 Ambient Air Temperature T °C A 0 20 40 60 80 100 a Ambient Air Temperature T °C a All Variants Holder Pin distance Colour Holder Material Remark Order Number l 22.5 black Thermoplastic - 0031.8201 █ l 22.5 black Thermoplastic - 0031.8201.G █ l 25 black Thermoplastic - 0031.8211 █ l 25 black Thermoplastic - 0031.8211.G █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER The fuseholder is suitable for use in equipment according to IEC 60335-1. Packaging Unit xxxx.xxxx Bulk 128 x 91 x 60 mm (100 pcs.) xxxx.xxxx.G Bulk 210 x 200 x 100 mm (1000 pcs.) Accessories Description Covers for OGN, OGN-SMD Cover for Holder OGN, OGN-SMD Adapter to OGN, OGN-SMD Fuse Carriage with Handle for OGN, OGN-SMD 8 1 0 2 2. 0 6. 2 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Fuses 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: 0031.8211 0031.8201